← Commit history
README.mdadded+62@@ -0,0 +1,62 @@+# MSP430FR2422IPW16++**Texas Instruments** · Microcontrollers (MCU/MPU/SOC) · TSSOP-16++MSP430FR2422IPW16 from Texas Instruments, in a TSSOP-16. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | P1.1/UCB0CLK/ACLK/A1/VREF+ | bidirectional | General-purpose I/O P1.1 (reset default). Muxed with eUSCI_B0 SPI clock (UCB0CLK), ACLK output, ADC analog input A1, and positive reference voltage output VREF+. LVCMOS/Analog buffer, powered from DVCC (1.8-3.6V). |+| 2 | P1.0/UCB0STE/A0/Veref+ | bidirectional | General-purpose I/O P1.0 (reset default). Muxed with eUSCI_B0 SPI slave-transmit-enable (UCB0STE), ADC analog input A0, and ADC external positive reference input Veref+. LVCMOS/Analog buffer, powered from DVCC. |+| 3 | TEST/SBWTCK | input | Test-mode select for JTAG (TEST) and Spy-Bi-Wire input clock (SBWTCK). Selects between JTAG shared function on P1.4-P1.7 and normal digital I/O. Has an internal pulldown always enabled; leave open if unused. LVCMOS input, DVCC-referenced. |+| 4 | RST/NMI/SBWTDIO | bidirectional | Active-low reset input (RST), non-maskable interrupt input (NMI), and Spy-Bi-Wire data I/O (SBWTDIO). Recommended termination: 47-kΩ pullup to DVCC with a ≤1.1-nF pulldown capacitor when using Spy-Bi-Wire debug tooling. LVCMOS, DVCC-referenced. |+| 5 | DVCC | power_in | Digital + analog core/IO supply. Recommended operating range 1.8V to 3.6V (minimum limited by SVS level). Decouple with 4.7-10µF bulk plus 100nF ceramic close to the pin; supply slew must remain below 0.2V/µs to avoid BOR. |+| 6 | DVSS | power_in | Digital and analog ground return (0V reference for DVCC). All device signal voltages are referenced to DVSS. |+| 7 | P2.1/UCA0RXD/UCA0SOMI/XIN | bidirectional | General-purpose I/O P2.1 (reset default). Muxed with eUSCI_A0 UART receive (UCA0RXD) or SPI slave-out/master-in (UCA0SOMI) via the USCIARMP remap, and with the LFXT crystal oscillator input XIN. LVCMOS buffer, DVCC-referenced. |+| 8 | P2.0/UCA0TXD/UCA0SIMO/XOUT | bidirectional | General-purpose I/O P2.0 (reset default). Muxed with eUSCI_A0 UART transmit (UCA0TXD) or SPI slave-in/master-out (UCA0SIMO) via the USCIARMP remap, and with the LFXT crystal oscillator output XOUT. LVCMOS buffer, DVCC-referenced. |+| 9 | P2.2/TA1.1/A4 | bidirectional | General-purpose I/O P2.2 (reset default). Muxed with Timer_A1 CCR1 capture/compare (TA1.1) and ADC analog input A4. LVCMOS/Analog buffer, DVCC-referenced. |+| 10 | P1.7/UCA0STE/TDO | bidirectional | General-purpose I/O P1.7 (reset default). Muxed with eUSCI_A0 SPI slave-transmit-enable (UCA0STE) and JTAG test data output (TDO). LVCMOS buffer, DVCC-referenced. |+| 11 | P1.6/UCA0CLK/TA0CLK/TDI/TCLK | bidirectional | General-purpose I/O P1.6 (reset default). Muxed with eUSCI_A0 SPI clock (UCA0CLK), Timer_A0 external clock (TA0CLK), and JTAG test data input / test clock (TDI/TCLK). LVCMOS buffer, DVCC-referenced. |+| 12 | P1.5/UCA0RXD/UCA0SOMI/TA0.2/TMS | bidirectional | General-purpose I/O P1.5 (reset default). Muxed with eUSCI_A0 UART receive (UCA0RXD) or SPI slave-out/master-in (UCA0SOMI) via the USCIARMP remap, Timer_A0 CCR2 capture/compare (TA0.2), and JTAG test mode select (TMS). LVCMOS buffer, DVCC-referenced. |+| 13 | P1.4/UCA0TXD/UCA0SIMO/TA0.1/TCK | bidirectional | General-purpose I/O P1.4 (reset default). Muxed with eUSCI_A0 UART transmit (UCA0TXD) or SPI slave-in/master-out (UCA0SIMO) via the USCIARMP remap, Timer_A0 CCR1 capture/compare (TA0.1), and JTAG test clock (TCK). LVCMOS buffer, DVCC-referenced. |+| 14 | DNC | unconnected | Do Not Connect. Leave this pin electrically unconnected on the board. |+| 15 | P1.3/UCB0SOMI/UCB0SCL/MCLK/A3 | bidirectional | General-purpose I/O P1.3 (reset default). Muxed with eUSCI_B0 SPI slave-out/master-in (UCB0SOMI) or I2C clock (UCB0SCL), MCLK output, and ADC analog input A3. LVCMOS/Analog buffer, DVCC-referenced. |+| 16 | P1.2/UCB0SIMO/UCB0SDA/SMCLK/A2/Veref- | bidirectional | General-purpose I/O P1.2 (reset default). Muxed with eUSCI_B0 SPI slave-in/master-out (UCB0SIMO) or I2C data (UCB0SDA), SMCLK output, ADC analog input A2, and ADC external negative reference input Veref-. LVCMOS/Analog buffer, DVCC-referenced. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Texas Instruments |+| Package | TSSOP-16 |+| Category | Embedded Processors & Controllers |+| Pins | 16 |++## Ordering variants++Same part, different packaging or reel option.++- `MSP430FR2422IPW16`+- `MSP430FR2422IPW16R`+- `MSP430FR2422IPW16IRHL`+- `MSP430FR2422IPW16IRHLR`+- `MSP430FR2422IPW16IRHLT`++## CAD (KiCad official)++- Symbol: `MSP430FR2422IPW16`+- Footprint: `Package_SO:TSSOP-16_4.4x5mm_P0.65mm`+- 3D model: TSSOP-16 (KiCad packages3D, STEP)++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/cn/lit/gpn/msp430fr2422) (None pp, sha256 `4854cd8a5843413c`, retrieved 2026-08-17, tier: lcsc)+- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.+- **Extractor:** `ds2sf` (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/msp430fr2422ipw16-datasheet.pdf)
page.jsonadded+34@@ -0,0 +1,34 @@+{+ "slug": "msp430fr2422ipw16",+ "version": "0.1.0",+ "type": "component",+ "description": "Texas Instruments Microcontrollers (MCU/MPU/SOC), TSSOP-16. Datasheet-verified pinout, KiCad symbol/footprint/3D.",+ "tags": [+ "component",+ "embedded processors & controllers",+ "msp430fr2422ipw16"+ ],+ "dependencies": {},+ "hero": {+ "type": "image",+ "path": "docs/hero.png"+ },+ "files": [+ "page.json",+ "README.md",+ "msp430fr2422ipw16.kicad_sym",+ "msp430fr2422ipw16.kicad_mod",+ "msp430fr2422ipw16.glb",+ "msp430fr2422ipw16.step",+ "msp430fr2422ipw16.lbr",+ "docs/hero.png",+ "docs/msp430fr2422ipw16-datasheet.pdf",+ "viewers/symbol.html",+ "viewers/footprint.html"+ ],+ "visibility": "public",+ "author": {+ "name": "Ray",+ "email": "[email protected]"+ }+}