component
MSP430FR2355TPT
Public Made by Adomby adom
Texas Instruments Microcontrollers (MCU/MPU/SOC), LQFP-48(7x7). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
← Commit history
README.mdadded+85@@ -0,0 +1,85 @@+# MSP430FR2355TPT++**Texas Instruments** · Microcontrollers (MCU/MPU/SOC) · LQFP-48(7x7)++MSP430FR2355TPT from Texas Instruments, in a LQFP-48(7x7). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | P1.2 | bidirectional | General-purpose I/O P1.2 (reset default, reset state OFF) multiplexed with UCB0SIMO/UCB0SDA, TB0TRG, OA0- (MSP430FR235x only), A2 and Veref-, LVCMOS buffer powered from DVCC. |+| 2 | P1.1 | bidirectional | General-purpose I/O P1.1 (reset default, reset state OFF) multiplexed with UCB0CLK, ACLK, OA0O (MSP430FR235x only), COMP0.1 and A1, LVCMOS buffer powered from DVCC. |+| 3 | P1.0 | bidirectional | General-purpose I/O P1.0 (reset default, reset state OFF) multiplexed with UCB0STE, SMCLK, COMP0.0, A0 and Veref+, LVCMOS buffer powered from DVCC. |+| 4 | TEST/SBWTCK | input | TEST pin for JTAG/test mode that always has an internal pulldown enabled and is left open if unused; it is multiplexed as the Spy-Bi-Wire clock SBWTCK. |+| 5 | RST/NMI/SBWTDIO | bidirectional | Reset (RST, reset default) or nonmaskable interrupt (NMI) pin, also used for Spy-Bi-Wire data SBWTDIO; if unused, use a 47-kΩ pullup to DVCC or the internal pullup with a 10-nF (or 1.1-nF) pulldown. |+| 6 | DVCC | power_in | Primary power supply pin for the digital and analog modules; VCC range is 1.8 V to 3.6 V with a recommended 4.7 µF to 10 µF capacitor at DVCC and 0.1 µF decoupling placed within a few millimeters of the pin. |+| 7 | DVSS | power_in | Ground supply pin (VSS, 0 V) for the digital and analog modules; all voltages are referenced to VSS. |+| 8 | P2.7/TB0CLK/XIN | bidirectional | General-purpose I/O P2.7 (reset default) multiplexed with the TB0CLK timer clock input and the XIN input terminal for the crystal oscillator; external bypass capacitors are required on the crystal pins. |+| 9 | P2.6/MCLK/XOUT | bidirectional | General-purpose I/O P2.6 (reset default) multiplexed with the MCLK output and the XOUT crystal oscillator output terminal. |+| 10 | P2.5/COMP1.0 | bidirectional | General-purpose I/O P2.5 (reset default) multiplexed with eCOMP1 comparator input channel COMP1.0. |+| 11 | P2.4/COMP1.1 | bidirectional | General-purpose I/O P2.4 (reset default) multiplexed with eCOMP1 comparator input channel COMP1.1. |+| 12 | P4.7/UCB1SOMI/UCB1SCL | bidirectional | General-purpose I/O P4.7 (reset default) multiplexed with eUSCI_B1 SPI slave-out (SOMI) or I2C clock (SCL). |+| 13 | P4.6/UCB1SIMO/UCB1SDA | bidirectional | General-purpose I/O P4.6 (reset default) multiplexed with eUSCI_B1 SPI slave-in (SIMO) or I2C data (SDA). |+| 14 | P4.5/UCB1CLK | bidirectional | General-purpose I/O P4.5 (reset default) multiplexed with the eUSCI_B1 clock UCB1CLK. |+| 15 | P4.4/UCB1STE | bidirectional | General-purpose I/O P4.4 (reset default) multiplexed with the eUSCI_B1 STE signal UCB1STE. |+| 16 | P6.6/TB3CLK | bidirectional | General-purpose I/O P6.6 (reset default) multiplexed with the Timer_B3 clock input TB3CLK. |+| 17 | P6.5/TB3.6 | bidirectional | General-purpose I/O P6.5 (reset default) multiplexed with Timer TB3 CCR6 capture/compare output TB3.6. |+| 18 | P6.4/TB3.5 | bidirectional | General-purpose I/O P6.4 (reset default) multiplexed with Timer TB3 CCR5 capture/compare output TB3.5. |+| 19 | P6.3/TB3.4 | bidirectional | General-purpose I/O P6.3 (reset default) multiplexed with Timer TB3 CCR4 capture/compare output TB3.4. |+| 20 | P6.2/TB3.3 | bidirectional | General-purpose I/O P6.2 (reset default) multiplexed with Timer TB3 CCR3 capture/compare output TB3.3. |+| 21 | P6.1/TB3.2 | bidirectional | General-purpose I/O P6.1 (reset default) multiplexed with Timer TB3 CCR2 capture/compare output TB3.2. |+| 22 | P6.0/TB3.1 | bidirectional | General-purpose I/O P6.0 (reset default) multiplexed with Timer TB3 CCR1 capture/compare output TB3.1. |+| 23 | P4.3/UCA1TXD/UCA1SIMO | bidirectional | General-purpose I/O P4.3 (reset default) multiplexed with eUSCI_A1 UART transmit (TXD) or SPI SIMO. |+| 24 | P4.2/UCA1RXD/UCA1SOMI | bidirectional | General-purpose I/O P4.2 (reset default) multiplexed with eUSCI_A1 UART receive (RXD) or SPI SOMI. |+| 25 | P4.1/UCA1CLK | bidirectional | General-purpose I/O P4.1 (reset default) multiplexed with the eUSCI_A1 clock UCA1CLK. |+| 26 | P4.0/UCA1STE/ISOTXD/ISORXD | bidirectional | General-purpose I/O P4.0 (reset default) multiplexed with eUSCI_A1 STE, ISOTXD and ISORXD. |+| 27 | P2.3/TB1TRG | bidirectional | General-purpose I/O P2.3 (reset default) multiplexed with the TB1 external trigger input TB1TRG. |+| 28 | P2.2/TB1CLK | bidirectional | General-purpose I/O P2.2 (reset default) multiplexed with the Timer TB1 clock input TB1CLK. |+| 29 | P2.1/TB1.2/COMP1.O | bidirectional | General-purpose I/O P2.1 (reset default) multiplexed with Timer TB1 CCR2 output TB1.2 and eCOMP1 comparator output COMP1.O. |+| 30 | P2.0/TB1.1/COMP0.O | bidirectional | General-purpose I/O P2.0 multiplexed with Timer TB1 CCR1 output TB1.1 and eCOMP0 comparator output COMP0.O. |+| 31 | P1.7/UCA0TXD/UCA0SIMO/TB0.2/TDO/OA1+/A7/VREF+ | bidirectional | General-purpose I/O P1.7 multiplexed with eUSCI_A0 TXD/SIMO, Timer TB0 CCR2 TB0.2, JTAG TDO, OA1+ (MSP430FR235x only), ADC input A7 and VREF+; the ADC input A7 can be used to measure the 1.2-V PMM reference when enabled. |+| 32 | P1.6/UCA0RXD/UCA0SOMI/TB0.1/TDI/TCLK/OA1-/A6 | bidirectional | General-purpose I/O P1.6 multiplexed with eUSCI_A0 RXD/SOMI, Timer TB0 CCR1 TB0.1, JTAG TDI/TCLK, OA1- (MSP430FR235x only) and ADC input A6. |+| 33 | P1.5/UCA0CLK/TMS/OA1O/A5 | bidirectional | General-purpose I/O P1.5 multiplexed with eUSCI_A0 clock UCA0CLK, JTAG TMS, OA1O (MSP430FR235x only) and ADC input A5. |+| 34 | P1.4/UCA0STE/TCK/A4 | bidirectional | General-purpose I/O P1.4 multiplexed with eUSCI_A0 STE, JTAG TCK and ADC input A4. |+| 35 | P3.7/OA3+ | bidirectional | General-purpose I/O P3.7 multiplexed with the non-inverting input OA3+ of SAC3 (MSP430FR235x only). |+| 36 | P3.6/OA3- | bidirectional | General-purpose I/O P3.6 multiplexed with the inverting input OA3- of SAC3 (MSP430FR235x only). |+| 37 | P3.5/OA3O | bidirectional | General-purpose I/O P3.5 multiplexed with the SAC3 operational amplifier output OA3O (MSP430FR235x only). |+| 38 | P3.4/SMCLK | bidirectional | General-purpose I/O P3.4 multiplexed with the SMCLK output. |+| 39 | P5.4 | bidirectional | General-purpose I/O P5.4 with no alternate function listed in the port P5 pin function table; LVCMOS buffer powered from DVCC. |+| 40 | P5.3/TB2TRG/A11 | bidirectional | General-purpose I/O P5.3 multiplexed with the Timer TB2 external trigger input TB2TRG and ADC input A11. |+| 41 | P5.2/TB2CLK/A10 | bidirectional | General-purpose I/O P5.2 multiplexed with the Timer TB2 clock input TB2CLK and ADC input A10. |+| 42 | P5.1/TB2.2/MFM.TX/A9 | bidirectional | General-purpose I/O P5.1 multiplexed with Timer TB2 CCR2 output TB2.2, Manchester module transmit MFM.TX and ADC input A9. |+| 43 | P5.0/TB2.1/MFM.RX/A8 | bidirectional | General-purpose I/O P5.0 multiplexed with Timer TB2 CCR1 output TB2.1, Manchester module receive MFM.RX and ADC input A8. |+| 44 | P3.3/OA2+ | bidirectional | General-purpose I/O P3.3 multiplexed with the non-inverting input OA2+ of SAC2 (MSP430FR235x only). |+| 45 | P3.2/OA2- | bidirectional | General-purpose I/O P3.2 multiplexed with the inverting input OA2- of SAC2 (MSP430FR235x only). |+| 46 | P3.1/OA2O | bidirectional | General-purpose I/O P3.1 multiplexed with the SAC2 operational amplifier output OA2O (MSP430FR235x only). |+| 47 | P3.0/MCLK | bidirectional | General-purpose I/O P3.0 multiplexed with the MCLK output. |+| 48 | P1.3/UCB0SOMI/UCB0SCL/OA0+/A3 | bidirectional | General-purpose I/O P1.3 multiplexed with eUSCI_B0 SPI SOMI or I2C SCL, OA0+ (MSP430FR235x only) and ADC input A3. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Texas Instruments |+| Package | LQFP-48(7x7) |+| Category | Embedded Processors & Controllers |+| Pins | 48 |++## CAD (KiCad official)++- Symbol: `MSP430FR2355TPT`+- Footprint: `Package_QFP:LQFP-48_7x7mm_P0.5mm`+- 3D model: LQFP-48(7x7) (KiCad packages3D, STEP)+- 3D model files: `msp430fr2355tpt-etched.step` / `msp430fr2355tpt-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `msp430fr2355tpt.step` / `msp430fr2355tpt.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/cn/lit/gpn/msp430fr2355) (152 pp, sha256 `f1ebe8a259a8e556`, retrieved 2026-10-08, tier: lcsc)+- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/msp430fr2355tpt-datasheet.pdf)
page.jsonadded+440@@ -0,0 +1,440 @@+{+ "slug": "msp430fr2355tpt",+ "version": "0.1.0",+ "type": "component",+ "description": "Texas Instruments Microcontrollers (MCU/MPU/SOC), LQFP-48(7x7). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",+ "tags": [+ "component",+ "embedded processors & controllers",+ "msp430fr2355tpt",+ "factory-2.0.0",+ "extractor-text"+ ],+ "dependencies": {},+ "hero": {+ "type": "image",+ "path": "docs/hero.png"+ },+ "files": [+ "page.json",+ "README.md",+ "msp430fr2355tpt.kicad_sym",+ "msp430fr2355tpt.kicad_mod",+ "msp430fr2355tpt.glb",+ "msp430fr2355tpt.step",+ "msp430fr2355tpt.lbr",+ "docs/hero.png",+ "docs/msp430fr2355tpt-datasheet.pdf",+ "viewers/symbol.html",+ "viewers/footprint.html",+ "msp430fr2355tpt-hero.glb",+ "msp430fr2355tpt-hero.overlay.json"+ ],+ "component": {+ "mpn": "MSP430FR2355TPT",+ "manufacturer": "Texas Instruments",+ "package": "LQFP-48(7x7)",+ "pin_count": 48,+ "category": "Embedded Processors & Controllers",+ "subcategory": "Microcontrollers (MCU/MPU/SOC)",+ "datasheet": "https://www.ti.com/cn/lit/gpn/msp430fr2355",+ "parts": {+ "symbol": "msp430fr2355tpt.kicad_sym",+ "footprint": "msp430fr2355tpt.kicad_mod",+ "model_3d": "msp430fr2355tpt-hero.glb",+ "model_3d_plain": "msp430fr2355tpt.glb",+ "model_3d_step": "msp430fr2355tpt-etched.step",+ "model_3d_step_plain": "msp430fr2355tpt.step",+ "lbr": "msp430fr2355tpt.lbr"+ },+ "distributor_links": {+ "lcsc": "C1337458",+ "digikey": "296-50260-ND",+ "mouser": "595-MSP430FR2355TPT"+ },+ "distributor_check": {+ "checked_at": "2026-10-08T19:08:56Z",+ "source": "Component Ocean /api/assign-pns",+ "digikey": {+ "pn": "296-50260-ND",+ "status": "found"+ },+ "mouser": {+ "pn": "595-MSP430FR2355TPT",+ "status": "found"+ }+ },+ "pins": [+ {+ "number": "1",+ "name": "P1.2",+ "type": "bidirectional",+ "description": "General-purpose I/O P1.2 (reset default, reset state OFF) multiplexed with UCB0SIMO/UCB0SDA, TB0TRG, OA0- (MSP430FR235x only), A2 and Veref-, LVCMOS buffer powered from DVCC."+ },+ {+ "number": "2",+ "name": "P1.1",+ "type": "bidirectional",+ "description": "General-purpose I/O P1.1 (reset default, reset state OFF) multiplexed with UCB0CLK, ACLK, OA0O (MSP430FR235x only), COMP0.1 and A1, LVCMOS buffer powered from DVCC."+ },+ {+ "number": "3",+ "name": "P1.0",+ "type": "bidirectional",+ "description": "General-purpose I/O P1.0 (reset default, reset state OFF) multiplexed with UCB0STE, SMCLK, COMP0.0, A0 and Veref+, LVCMOS buffer powered from DVCC."+ },+ {+ "number": "4",+ "name": "TEST/SBWTCK",+ "type": "input",+ "description": "TEST pin for JTAG/test mode that always has an internal pulldown enabled and is left open if unused; it is multiplexed as the Spy-Bi-Wire clock SBWTCK."+ },+ {+ "number": "5",+ "name": "RST/NMI/SBWTDIO",+ "type": "bidirectional",+ "description": "Reset (RST, reset default) or nonmaskable interrupt (NMI) pin, also used for Spy-Bi-Wire data SBWTDIO; if unused, use a 47-kΩ pullup to DVCC or the internal pullup with a 10-nF (or 1.1-nF) pulldown."+ },+ {+ "number": "6",+ "name": "DVCC",+ "type": "power_in",+ "description": "Primary power supply pin for the digital and analog modules; VCC range is 1.8 V to 3.6 V with a recommended 4.7 µF to 10 µF capacitor at DVCC and 0.1 µF decoupling placed within a few millimeters of the pin."+ },+ {+ "number": "7",+ "name": "DVSS",+ "type": "power_in",+ "description": "Ground supply pin (VSS, 0 V) for the digital and analog modules; all voltages are referenced to VSS."+ },+ {+ "number": "8",+ "name": "P2.7/TB0CLK/XIN",+ "type": "bidirectional",+ "description": "General-purpose I/O P2.7 (reset default) multiplexed with the TB0CLK timer clock input and the XIN input terminal for the crystal oscillator; external bypass capacitors are required on the crystal pins."+ },+ {+ "number": "9",+ "name": "P2.6/MCLK/XOUT",+ "type": "bidirectional",+ "description": "General-purpose I/O P2.6 (reset default) multiplexed with the MCLK output and the XOUT crystal oscillator output terminal."+ },+ {+ "number": "10",+ "name": "P2.5/COMP1.0",+ "type": "bidirectional",+ "description": "General-purpose I/O P2.5 (reset default) multiplexed with eCOMP1 comparator input channel COMP1.0."+ },+ {+ "number": "11",+ "name": "P2.4/COMP1.1",+ "type": "bidirectional",+ "description": "General-purpose I/O P2.4 (reset default) multiplexed with eCOMP1 comparator input channel COMP1.1."+ },+ {+ "number": "12",+ "name": "P4.7/UCB1SOMI/UCB1SCL",+ "type": "bidirectional",+ "description": "General-purpose I/O P4.7 (reset default) multiplexed with eUSCI_B1 SPI slave-out (SOMI) or I2C clock (SCL)."+ },+ {+ "number": "13",+ "name": "P4.6/UCB1SIMO/UCB1SDA",+ "type": "bidirectional",+ "description": "General-purpose I/O P4.6 (reset default) multiplexed with eUSCI_B1 SPI slave-in (SIMO) or I2C data (SDA)."+ },+ {+ "number": "14",+ "name": "P4.5/UCB1CLK",+ "type": "bidirectional",+ "description": "General-purpose I/O P4.5 (reset default) multiplexed with the eUSCI_B1 clock UCB1CLK."+ },+ {+ "number": "15",+ "name": "P4.4/UCB1STE",+ "type": "bidirectional",+ "description": "General-purpose I/O P4.4 (reset default) multiplexed with the eUSCI_B1 STE signal UCB1STE."+ },+ {+ "number": "16",+ "name": "P6.6/TB3CLK",+ "type": "bidirectional",+ "description": "General-purpose I/O P6.6 (reset default) multiplexed with the Timer_B3 clock input TB3CLK."+ },+ {+ "number": "17",+ "name": "P6.5/TB3.6",+ "type": "bidirectional",+ "description": "General-purpose I/O P6.5 (reset default) multiplexed with Timer TB3 CCR6 capture/compare output TB3.6."+ },+ {+ "number": "18",+ "name": "P6.4/TB3.5",+ "type": "bidirectional",+ "description": "General-purpose I/O P6.4 (reset default) multiplexed with Timer TB3 CCR5 capture/compare output TB3.5."+ },+ {+ "number": "19",+ "name": "P6.3/TB3.4",+ "type": "bidirectional",+ "description": "General-purpose I/O P6.3 (reset default) multiplexed with Timer TB3 CCR4 capture/compare output TB3.4."+ },+ {+ "number": "20",+ "name": "P6.2/TB3.3",+ "type": "bidirectional",+ "description": "General-purpose I/O P6.2 (reset default) multiplexed with Timer TB3 CCR3 capture/compare output TB3.3."+ },+ {+ "number": "21",+ "name": "P6.1/TB3.2",+ "type": "bidirectional",+ "description": "General-purpose I/O P6.1 (reset default) multiplexed with Timer TB3 CCR2 capture/compare output TB3.2."+ },+ {+ "number": "22",+ "name": "P6.0/TB3.1",+ "type": "bidirectional",+ "description": "General-purpose I/O P6.0 (reset default) multiplexed with Timer TB3 CCR1 capture/compare output TB3.1."+ },+ {+ "number": "23",+ "name": "P4.3/UCA1TXD/UCA1SIMO",+ "type": "bidirectional",+ "description": "General-purpose I/O P4.3 (reset default) multiplexed with eUSCI_A1 UART transmit (TXD) or SPI SIMO."+ },+ {+ "number": "24",+ "name": "P4.2/UCA1RXD/UCA1SOMI",+ "type": "bidirectional",+ "description": "General-purpose I/O P4.2 (reset default) multiplexed with eUSCI_A1 UART receive (RXD) or SPI SOMI."+ },+ {+ "number": "25",+ "name": "P4.1/UCA1CLK",+ "type": "bidirectional",+ "description": "General-purpose I/O P4.1 (reset default) multiplexed with the eUSCI_A1 clock UCA1CLK."+ },+ {+ "number": "26",+ "name": "P4.0/UCA1STE/ISOTXD/ISORXD",+ "type": "bidirectional",+ "description": "General-purpose I/O P4.0 (reset default) multiplexed with eUSCI_A1 STE, ISOTXD and ISORXD."+ },+ {+ "number": "27",+ "name": "P2.3/TB1TRG",+ "type": "bidirectional",+ "description": "General-purpose I/O P2.3 (reset default) multiplexed with the TB1 external trigger input TB1TRG."+ },+ {+ "number": "28",+ "name": "P2.2/TB1CLK",+ "type": "bidirectional",+ "description": "General-purpose I/O P2.2 (reset default) multiplexed with the Timer TB1 clock input TB1CLK."+ },+ {+ "number": "29",+ "name": "P2.1/TB1.2/COMP1.O",+ "type": "bidirectional",+ "description": "General-purpose I/O P2.1 (reset default) multiplexed with Timer TB1 CCR2 output TB1.2 and eCOMP1 comparator output COMP1.O."+ },+ {+ "number": "30",+ "name": "P2.0/TB1.1/COMP0.O",+ "type": "bidirectional",+ "description": "General-purpose I/O P2.0 multiplexed with Timer TB1 CCR1 output TB1.1 and eCOMP0 comparator output COMP0.O."+ },+ {+ "number": "31",+ "name": "P1.7/UCA0TXD/UCA0SIMO/TB0.2/TDO/OA1+/A7/VREF+",+ "type": "bidirectional",+ "description": "General-purpose I/O P1.7 multiplexed with eUSCI_A0 TXD/SIMO, Timer TB0 CCR2 TB0.2, JTAG TDO, OA1+ (MSP430FR235x only), ADC input A7 and VREF+; the ADC input A7 can be used to measure the 1.2-V PMM reference when enabled."+ },+ {+ "number": "32",+ "name": "P1.6/UCA0RXD/UCA0SOMI/TB0.1/TDI/TCLK/OA1-/A6",+ "type": "bidirectional",+ "description": "General-purpose I/O P1.6 multiplexed with eUSCI_A0 RXD/SOMI, Timer TB0 CCR1 TB0.1, JTAG TDI/TCLK, OA1- (MSP430FR235x only) and ADC input A6."+ },+ {+ "number": "33",+ "name": "P1.5/UCA0CLK/TMS/OA1O/A5",+ "type": "bidirectional",+ "description": "General-purpose I/O P1.5 multiplexed with eUSCI_A0 clock UCA0CLK, JTAG TMS, OA1O (MSP430FR235x only) and ADC input A5."+ },+ {+ "number": "34",+ "name": "P1.4/UCA0STE/TCK/A4",+ "type": "bidirectional",+ "description": "General-purpose I/O P1.4 multiplexed with eUSCI_A0 STE, JTAG TCK and ADC input A4."+ },+ {+ "number": "35",+ "name": "P3.7/OA3+",+ "type": "bidirectional",+ "description": "General-purpose I/O P3.7 multiplexed with the non-inverting input OA3+ of SAC3 (MSP430FR235x only)."+ },+ {+ "number": "36",+ "name": "P3.6/OA3-",+ "type": "bidirectional",+ "description": "General-purpose I/O P3.6 multiplexed with the inverting input OA3- of SAC3 (MSP430FR235x only)."+ },+ {+ "number": "37",+ "name": "P3.5/OA3O",+ "type": "bidirectional",+ "description": "General-purpose I/O P3.5 multiplexed with the SAC3 operational amplifier output OA3O (MSP430FR235x only)."+ },+ {+ "number": "38",+ "name": "P3.4/SMCLK",+ "type": "bidirectional",+ "description": "General-purpose I/O P3.4 multiplexed with the SMCLK output."+ },+ {+ "number": "39",+ "name": "P5.4",+ "type": "bidirectional",+ "description": "General-purpose I/O P5.4 with no alternate function listed in the port P5 pin function table; LVCMOS buffer powered from DVCC."+ },+ {+ "number": "40",+ "name": "P5.3/TB2TRG/A11",+ "type": "bidirectional",+ "description": "General-purpose I/O P5.3 multiplexed with the Timer TB2 external trigger input TB2TRG and ADC input A11."+ },+ {+ "number": "41",+ "name": "P5.2/TB2CLK/A10",+ "type": "bidirectional",+ "description": "General-purpose I/O P5.2 multiplexed with the Timer TB2 clock input TB2CLK and ADC input A10."+ },+ {+ "number": "42",+ "name": "P5.1/TB2.2/MFM.TX/A9",+ "type": "bidirectional",+ "description": "General-purpose I/O P5.1 multiplexed with Timer TB2 CCR2 output TB2.2, Manchester module transmit MFM.TX and ADC input A9."+ },+ {+ "number": "43",+ "name": "P5.0/TB2.1/MFM.RX/A8",+ "type": "bidirectional",+ "description": "General-purpose I/O P5.0 multiplexed with Timer TB2 CCR1 output TB2.1, Manchester module receive MFM.RX and ADC input A8."+ },+ {+ "number": "44",+ "name": "P3.3/OA2+",+ "type": "bidirectional",+ "description": "General-purpose I/O P3.3 multiplexed with the non-inverting input OA2+ of SAC2 (MSP430FR235x only)."+ },+ {+ "number": "45",+ "name": "P3.2/OA2-",+ "type": "bidirectional",+ "description": "General-purpose I/O P3.2 multiplexed with the inverting input OA2- of SAC2 (MSP430FR235x only)."+ },+ {+ "number": "46",+ "name": "P3.1/OA2O",+ "type": "bidirectional",+ "description": "General-purpose I/O P3.1 multiplexed with the SAC2 operational amplifier output OA2O (MSP430FR235x only)."+ },+ {+ "number": "47",+ "name": "P3.0/MCLK",+ "type": "bidirectional",+ "description": "General-purpose I/O P3.0 multiplexed with the MCLK output."+ },+ {+ "number": "48",+ "name": "P1.3/UCB0SOMI/UCB0SCL/OA0+/A3",+ "type": "bidirectional",+ "description": "General-purpose I/O P1.3 multiplexed with eUSCI_B0 SPI SOMI or I2C SCL, OA0+ (MSP430FR235x only) and ADC input A3."+ }+ ],+ "provenance": {+ "extractor": "extract_pins 0.3",+ "factory_chain": {+ "factory": "2.0.0",+ "extractor": "extract_pins 0.3",+ "primary_model": "claude-haiku-5-5",+ "primary_mode": "text",+ "consensus_model": "claude-sonnet-5-5",+ "consensus": "agreed",+ "guards": "pin_guards 0.1: passed",+ "guard_notes": [+ "extractor flagged: Pin 30 (P2.0) is not printed in the provided text of Table 4-1 (pages 20-21 are missing). The number; Pin 39 is not printed in the provided text of any signal or attribute table. P5.4 is the only port p; The pin diagram text for Figure 4-1 (page 10) is scrambled and its printed numbers disagree with Tab",+ "1/48 pins cited to the wrong page (name found elsewhere): ['39:P5.4@p104']"+ ],+ "pages_sent": 61,+ "cost_usd": 0.3473,+ "at": "2026-10-08T19:08:31"+ },+ "datasheet": {+ "url": "https://www.ti.com/cn/lit/gpn/msp430fr2355",+ "pages": 152,+ "sha256": "f1ebe8a259a8e556",+ "source_tier": "lcsc"+ },+ "cad": "KiCad official (CC-BY-SA 4.0)",+ "pins": {+ "total": 48,+ "described": 48,+ "cites_pages": true,+ "refuses_to_fabricate": true+ }+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ },+ "models_3d": [+ {+ "file": "msp430fr2355tpt.step",+ "role": "plain",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 9,+ 9,+ 1.5+ ],+ "zmin_mm": 0,+ "centre_offset_mm": 0,+ "footprint_binding": "identity",+ "sha256": "9dea352d93177c2904afd7d7b68ea8855ce1ab691f69f8b3e13655600514b6bf",+ "checked": "2026-10-08",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ },+ {+ "file": "msp430fr2355tpt-etched.step",+ "role": "eda",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 9,+ 9,+ 1.5+ ],+ "zmin_mm": 0,+ "centre_offset_mm": 0,+ "footprint_binding": "identity",+ "sha256": "565214218d5a9cf0ed3fda9332cc56152bcdd9b296829f0d8a5fbdd6a3771f37",+ "checked": "2026-10-08",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ }+ ]+ },+ "visibility": "public",+ "org": "adom",+ "author": {+ "name": "Ray",+ "email": "[email protected]"+ }+}