← Commit history

Initial commit: component/msp430f5501irgzt

Ray ·cd0aba9b29 ·
2 files changed +126
README.mdadded+92
@@ -0,0 +1,92 @@+# MSP430F5501IRGZT++**Texas Instruments** · Microcontrollers (MCU/MPU/SOC) · VQFN-48-EP(7x7)++MSP430F5501IRGZT from Texas Instruments, in a VQFN-48-EP(7x7). Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | P6.0/CB0 | bidirectional | General-purpose digital I/O; also Comparator_B input CB0. No ADC input on F5501 (A0 not available). |+| 2 | P6.1/CB1 | bidirectional | General-purpose digital I/O; also Comparator_B input CB1. No ADC input on F5501. |+| 3 | P6.2/CB2 | bidirectional | General-purpose digital I/O; also Comparator_B input CB2. No ADC input on F5501. |+| 4 | P6.3/CB3 | bidirectional | General-purpose digital I/O; also Comparator_B input CB3. No ADC input on F5501. |+| 5 | P5.0 | bidirectional | General-purpose digital I/O. ADC channel A8 and external reference VeREF+ not available on the F5501 variant. |+| 6 | P5.1 | bidirectional | General-purpose digital I/O. ADC channel A9 and external reference VeREF- not available on the F5501 variant. |+| 7 | AVCC1 | power_in | Analog power supply. Recommended tied to DVCC1 (0.3 V max difference during power-up/operation). Supply range 1.8 V to 3.6 V. |+| 8 | P5.4/XIN | bidirectional | General-purpose digital I/O; input terminal for the low-frequency crystal oscillator XT1 (typically 32.768 kHz watch crystal). |+| 9 | P5.5/XOUT | bidirectional | General-purpose digital I/O; output terminal for the low-frequency crystal oscillator XT1. |+| 10 | AVSS1 | power_in | Analog ground supply. |+| 11 | DVCC1 | power_in | Digital power supply. 1.8 V to 3.6 V. Recommended to be tied to AVCC1. |+| 12 | DVSS1 | power_in | Digital ground supply. |+| 13 | VCORE | passive | Regulated core supply output from internal LDO. Internal use only, no external DC loading. Connect a 470 nF capacitor (CVCORE) to VSS; ratio CDVCC/CVCORE ≥ 10. |+| 14 | P1.0/TA0CLK/ACLK | bidirectional | General-purpose digital I/O with port interrupt; TA0 external clock TA0CLK input; ACLK output (divided by 1/2/4/8/16/32). |+| 15 | P1.1/TA0.0 | bidirectional | General-purpose digital I/O with port interrupt; TA0 CCR0 capture (CCI0A) input / compare (Out0) output; BSL transmit output. |+| 16 | P1.2/TA0.1 | bidirectional | General-purpose digital I/O with port interrupt; TA0 CCR1 capture (CCI1A) / compare (Out1); BSL receive input. |+| 17 | P1.3/TA0.2 | bidirectional | General-purpose digital I/O with port interrupt; TA0 CCR2 capture (CCI2A) input / compare (Out2) output. |+| 18 | P1.4/TA0.3 | bidirectional | General-purpose digital I/O with port interrupt; TA0 CCR3 capture (CCI3A) input / compare (Out3) output. |+| 19 | P1.5/TA0.4 | bidirectional | General-purpose digital I/O with port interrupt; TA0 CCR4 capture (CCI4A) input / compare (Out4) output. |+| 20 | P1.6/TA1CLK | bidirectional | General-purpose digital I/O with port interrupt; TA1 external clock TA1CLK input. (CBOUT function is present on other packages but not on this RGZ pin per Figure 4-5.) |+| 21 | P1.7/TA1.0 | bidirectional | General-purpose digital I/O with port interrupt; TA1 CCR0 capture (CCI0A) / compare (Out0). |+| 22 | P2.0/TA1.1 | bidirectional | General-purpose digital I/O with port interrupt; TA1 CCR1 capture (CCI1A) / compare (Out1). |+| 23 | PJ.0/TDO | bidirectional | General-purpose digital I/O (port PJ); JTAG test data output (TDO). |+| 24 | PJ.1/TDI/TCLK | bidirectional | General-purpose digital I/O (port PJ); JTAG test data input (TDI) and test clock (TCLK). |+| 25 | PJ.2/TMS | bidirectional | General-purpose digital I/O (port PJ); JTAG test mode select (TMS). |+| 26 | PJ.3/TCK | bidirectional | General-purpose digital I/O (port PJ); JTAG test clock (TCK). |+| 27 | DVSS2 | power_in | Digital ground supply (second DVSS pin). |+| 28 | DVCC2 | power_in | Digital power supply (second DVCC pin), 1.8 V to 3.6 V. Tie to DVCC1/AVCC1. |+| 29 | P4.0/PM_UCB1STE/PM_UCA1CLK | bidirectional | General-purpose digital I/O with reconfigurable port-map secondary function. Default map: USCI_B1 SPI slave-transmit-enable (STE); USCI_A1 SPI clock (in slave / out master). |+| 30 | P4.1/PM_UCB1SIMO/PM_UCB1SDA | bidirectional | General-purpose digital I/O with reconfigurable port-map secondary function. Default map: USCI_B1 SPI SIMO (slave-in/master-out); USCI_B1 I2C data (SDA). |+| 31 | P4.2/PM_UCB1SOMI/PM_UCB1SCL | bidirectional | General-purpose digital I/O with reconfigurable port-map secondary function. Default map: USCI_B1 SPI SOMI (slave-out/master-in); USCI_B1 I2C clock (SCL). |+| 32 | P4.3/PM_UCB1CLK/PM_UCA1STE | bidirectional | General-purpose digital I/O with reconfigurable port-map secondary function. Default map: USCI_B1 SPI clock (in slave / out master); USCI_A1 SPI slave-transmit-enable. |+| 33 | P4.4/PM_UCA1TXD/PM_UCA1SIMO | bidirectional | General-purpose digital I/O with reconfigurable port-map secondary function. Default map: USCI_A1 UART TXD; USCI_A1 SPI SIMO. |+| 34 | P4.5/PM_UCA1RXD/PM_UCA1SOMI | bidirectional | General-purpose digital I/O with reconfigurable port-map secondary function. Default map: USCI_A1 UART RXD; USCI_A1 SPI SOMI. |+| 35 | P4.6/PM_NONE | bidirectional | General-purpose digital I/O with reconfigurable port-map secondary function. Default map: no secondary function (available for user-selected port-map assignment). |+| 36 | P4.7/PM_NONE | bidirectional | General-purpose digital I/O with reconfigurable port-map secondary function. Default map: no secondary function. |+| 37 | VSSU | power_in | USB PHY ground supply. |+| 38 | PU.0/DP | bidirectional | USB full-speed D+ data terminal (also general-purpose digital I/O when controlled by USB control register). |+| 39 | PUR | bidirectional | USB pullup resistor pin (open-drain). Voltage level here at reset selects USB BSL entry; recommended 1 MΩ to ground. |+| 40 | PU.1/DM | bidirectional | USB full-speed D- data terminal (also general-purpose digital I/O when controlled by USB control register). |+| 41 | VBUS | power_in | USB LDO input; connect to USB VBUS (5 V from USB host/hub) when USB is used. |+| 42 | VUSB | power_out | USB LDO output (3.3 V nominal); requires external bypass capacitor per datasheet. |+| 43 | V18 | passive | USB regulated 1.8 V power (internal use only, no external DC loading). Bypass capacitor only. |+| 44 | AVSS2 | power_in | Analog ground supply (second AVSS pin). |+| 45 | P5.2/XT2IN | bidirectional | General-purpose digital I/O; input terminal for the high-frequency crystal oscillator XT2 (up to 32 MHz). |+| 46 | P5.3/XT2OUT | bidirectional | General-purpose digital I/O; output terminal for the high-frequency crystal oscillator XT2. |+| 47 | TEST/SBWTCK | input | Test mode pin - selects digital I/O function on JTAG pins; also Spy-Bi-Wire (SBW) input clock. |+| 48 | RST/NMI/SBWTDIO | bidirectional | Active-low reset input (internal pullup enabled when configured as reset); nonmaskable interrupt input; Spy-Bi-Wire data I/O. |+| 49 | PAD | power_in | Exposed QFN thermal pad on the underside of the package. TI recommends connecting to VSS. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Texas Instruments |+| Package | VQFN-48-EP(7x7) |+| Category | Embedded Processors & Controllers |+| Pins | 49 |++## Ordering variants++Same part, different packaging or reel option.++- `MSP430F5501IRGZR`+- `MSP430F5501IRGZT`++## CAD (KiCad official)++- Symbol: `MSP430F5501IRGZT`+- Footprint: `Package_DFN_QFN:QFN-48-1EP_7x7mm_P0.5mm_EP5.15x5.15mm`+- 3D model: VQFN-48-EP(7x7) (KiCad packages3D, STEP)++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/cn/lit/gpn/msp430f5508) (None pp, sha256 `39e075da0f1e3944`, retrieved 2026-08-17, tier: lcsc)+- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.+- **Extractor:** `ds2sf` (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/msp430f5501irgzt-datasheet.pdf)
page.jsonadded+34
@@ -0,0 +1,34 @@+{+  "slug": "msp430f5501irgzt",+  "version": "0.1.0",+  "type": "component",+  "description": "Texas Instruments Microcontrollers (MCU/MPU/SOC), VQFN-48-EP(7x7). Datasheet-verified pinout, KiCad symbol/footprint/3D.",+  "tags": [+    "component",+    "embedded processors & controllers",+    "msp430f5501irgzt"+  ],+  "dependencies": {},+  "hero": {+    "type": "image",+    "path": "docs/hero.png"+  },+  "files": [+    "page.json",+    "README.md",+    "msp430f5501irgzt.kicad_sym",+    "msp430f5501irgzt.kicad_mod",+    "msp430f5501irgzt.glb",+    "msp430f5501irgzt.step",+    "msp430f5501irgzt.lbr",+    "docs/hero.png",+    "docs/msp430f5501irgzt-datasheet.pdf",+    "viewers/symbol.html",+    "viewers/footprint.html"+  ],+  "visibility": "public",+  "author": {+    "name": "Ray",+    "email": "[email protected]"+  }+}\ No newline at end of file