← Commit history

Initial commit: component/ms8829

Ray ·e7ca9952d6 ·
2 files changed +307
README.mdadded+62
@@ -0,0 +1,62 @@+# MS8829++**Hangzhou Ruimeng Tech** · Brushless DC (BLDC) Motor Driver · QFN-24-EP(4x4)++MS8829 from Hangzhou Ruimeng Tech, in a QFN-24-EP(4x4). Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | IN3- | input | HALL signal input differential pair negative terminal; requires 80mVp-p minimum sine wave amplitude with 20mV hysteresis. |+| 2 | IN3+ | input | HALL signal input differential pair positive terminal; requires 80mVp-p minimum sine wave amplitude with 20mV hysteresis. |+| 3 | IN2- | input | HALL signal input differential pair negative terminal; requires 80mVp-p minimum sine wave amplitude with 20mV hysteresis. |+| 4 | IN2+ | input | HALL signal input differential pair positive terminal; requires 80mVp-p minimum sine wave amplitude with 20mV hysteresis. |+| 5 | IN1- | input | HALL signal input differential pair negative terminal; requires 80mVp-p minimum sine wave amplitude with 20mV hysteresis. |+| 6 | IN1+ | input | HALL signal input differential pair positive terminal; requires 80mVp-p minimum sine wave amplitude with 20mV hysteresis. |+| 7 | SGND | power_in | Logic ground reference for digital control circuits; 0V reference potential for all logic signals. |+| 8 | VREG | power_out | Regulated 5V output for logic power supply; output voltage 5.07-5.20V at load current -5mA to -10mA. |+| 9 | CP2 | output | Charge pump output capacitor connection pin; 50kHz switching frequency for external 0.22µF capacitor charge pump stage. |+| 10 | CP1 | output | Charge pump output capacitor connection pin; 50kHz switching frequency for external 0.22µF capacitor charge pump stage. |+| 11 | VCC1 | power_in | Control logic power supply input; operating voltage range 8.0-35V for digital control circuits. |+| 12 | VCC2 | power_in | Output driver power supply input; operating voltage range 8.0-35V provides current up to 1.5A per motor phase. |+| 13 | VG | output | Charge pump bootstrap output for high-side gate drive voltage; nominal output VCC+5.1V with absolute maximum 42V rating. |+| 14 | OUT1 | output | Three-phase motor driver output phase 1; maximum ±1.5A with lower on-resistance 0.47-0.65Ω and upper on-resistance 0.6-0.9Ω. |+| 15 | OUT3 | output | Three-phase motor driver output phase 3; maximum ±1.5A with lower on-resistance 0.47-0.65Ω and upper on-resistance 0.6-0.9Ω. |+| 16 | OUT2 | output | Three-phase motor driver output phase 2; maximum ±1.5A with lower on-resistance 0.47-0.65Ω and upper on-resistance 0.6-0.9Ω. |+| 17 | RF | passive | Output current sensing node for overcurrent protection; connected to sense resistor with threshold voltage VRF=0.21V at 1.5A maximum current. |+| 18 | PGND | power_in | Power ground return for motor driver stage; 0V reference potential for high-current motor output circuits. |+| 19 | S/S | input | Start/Stop control input; low level (0-1.65V) enables motor drive, high level (1.75-VREG) or open-circuit initiates short-brake mode. |+| 20 | FG | output | 1-HALL frequency generator output synchronized to motor commutation; open-drain output with maximum 14mA sink current. |+| 21 | F/R | input | Forward/Reverse direction control input; low level (0-1.65V) selects reverse, high level (1.75-VREG) selects forward rotation. |+| 22 | CSD | input | Current Stall Detection protection circuit input; detects stalled motor with timeout period 90×C µF seconds for external capacitor. |+| 23 | PWMIN | input | PWM speed control input; recommended frequency 0.5-60kHz, logic 0 (0-1.65V) enables drive, logic 1 (1.75-VREG) disables drive. |+| 24 | HB | input | HALL element bias voltage output; provides 3.6V typical bias (3.56-3.63V) for external HALL sensors with output current up to 700µA. |+| 25 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Hangzhou Ruimeng Tech |+| Package | QFN-24-EP(4x4) |+| Category | Motor Driver ICs |+| Pins | 25 |++## CAD (KiCad official)++- Symbol: `MS8829`+- Footprint: `Package_DFN_QFN:QFN-24-1EP_4x4mm_P0.5mm_EP2.7x2.7mm`+- 3D model: QFN-24-EP(4x4) (KiCad packages3D, STEP)+- 3D model files: `ms8829-etched.step` / `ms8829-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `ms8829.step` / `ms8829.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Hangzhou Ruimeng Tech datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588883841679568896) (14 pp, sha256 `be3f0330743d11b8`, retrieved 2026-09-21, tier: lcsc)+- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.2`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-4-6` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/ms8829-datasheet.pdf)
page.jsonadded+245
@@ -0,0 +1,245 @@+{+  "slug": "ms8829",+  "version": "0.1.0",+  "type": "component",+  "description": "Hangzhou Ruimeng Tech Brushless DC (BLDC) Motor Driver, QFN-24-EP(4x4). Datasheet-verified pinout, KiCad symbol/footprint/3D.",+  "tags": [+    "component",+    "motor driver ics",+    "ms8829",+    "factory-2.0.0",+    "extractor-text"+  ],+  "dependencies": {},+  "hero": {+    "type": "image",+    "path": "docs/hero.png"+  },+  "files": [+    "page.json",+    "README.md",+    "ms8829.kicad_sym",+    "ms8829.kicad_mod",+    "ms8829.glb",+    "ms8829.step",+    "ms8829.lbr",+    "docs/hero.png",+    "docs/ms8829-datasheet.pdf",+    "viewers/symbol.html",+    "viewers/footprint.html"+  ],+  "component": {+    "mpn": "MS8829",+    "manufacturer": "Hangzhou Ruimeng Tech",+    "package": "QFN-24-EP(4x4)",+    "pin_count": 25,+    "category": "Motor Driver ICs",+    "subcategory": "Brushless DC (BLDC) Motor Driver",+    "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588883841679568896",+    "parts": {+      "symbol": "ms8829.kicad_sym",+      "footprint": "ms8829.kicad_mod",+      "model_3d": "ms8829-etched.glb",+      "model_3d_plain": "ms8829.glb",+      "model_3d_step": "ms8829-etched.step",+      "model_3d_step_plain": "ms8829.step",+      "lbr": "ms8829.lbr"+    },+    "distributor_links": {+      "lcsc": "C231941"+    },+    "pins": [+      {+        "number": "1",+        "name": "IN3-",+        "type": "input",+        "description": "HALL signal input differential pair negative terminal; requires 80mVp-p minimum sine wave amplitude with 20mV hysteresis."+      },+      {+        "number": "2",+        "name": "IN3+",+        "type": "input",+        "description": "HALL signal input differential pair positive terminal; requires 80mVp-p minimum sine wave amplitude with 20mV hysteresis."+      },+      {+        "number": "3",+        "name": "IN2-",+        "type": "input",+        "description": "HALL signal input differential pair negative terminal; requires 80mVp-p minimum sine wave amplitude with 20mV hysteresis."+      },+      {+        "number": "4",+        "name": "IN2+",+        "type": "input",+        "description": "HALL signal input differential pair positive terminal; requires 80mVp-p minimum sine wave amplitude with 20mV hysteresis."+      },+      {+        "number": "5",+        "name": "IN1-",+        "type": "input",+        "description": "HALL signal input differential pair negative terminal; requires 80mVp-p minimum sine wave amplitude with 20mV hysteresis."+      },+      {+        "number": "6",+        "name": "IN1+",+        "type": "input",+        "description": "HALL signal input differential pair positive terminal; requires 80mVp-p minimum sine wave amplitude with 20mV hysteresis."+      },+      {+        "number": "7",+        "name": "SGND",+        "type": "power_in",+        "description": "Logic ground reference for digital control circuits; 0V reference potential for all logic signals."+      },+      {+        "number": "8",+        "name": "VREG",+        "type": "power_out",+        "description": "Regulated 5V output for logic power supply; output voltage 5.07-5.20V at load current -5mA to -10mA."+      },+      {+        "number": "9",+        "name": "CP2",+        "type": "output",+        "description": "Charge pump output capacitor connection pin; 50kHz switching frequency for external 0.22µF capacitor charge pump stage."+      },+      {+        "number": "10",+        "name": "CP1",+        "type": "output",+        "description": "Charge pump output capacitor connection pin; 50kHz switching frequency for external 0.22µF capacitor charge pump stage."+      },+      {+        "number": "11",+        "name": "VCC1",+        "type": "power_in",+        "description": "Control logic power supply input; operating voltage range 8.0-35V for digital control circuits."+      },+      {+        "number": "12",+        "name": "VCC2",+        "type": "power_in",+        "description": "Output driver power supply input; operating voltage range 8.0-35V provides current up to 1.5A per motor phase."+      },+      {+        "number": "13",+        "name": "VG",+        "type": "output",+        "description": "Charge pump bootstrap output for high-side gate drive voltage; nominal output VCC+5.1V with absolute maximum 42V rating."+      },+      {+        "number": "14",+        "name": "OUT1",+        "type": "output",+        "description": "Three-phase motor driver output phase 1; maximum ±1.5A with lower on-resistance 0.47-0.65Ω and upper on-resistance 0.6-0.9Ω."+      },+      {+        "number": "15",+        "name": "OUT3",+        "type": "output",+        "description": "Three-phase motor driver output phase 3; maximum ±1.5A with lower on-resistance 0.47-0.65Ω and upper on-resistance 0.6-0.9Ω."+      },+      {+        "number": "16",+        "name": "OUT2",+        "type": "output",+        "description": "Three-phase motor driver output phase 2; maximum ±1.5A with lower on-resistance 0.47-0.65Ω and upper on-resistance 0.6-0.9Ω."+      },+      {+        "number": "17",+        "name": "RF",+        "type": "passive",+        "description": "Output current sensing node for overcurrent protection; connected to sense resistor with threshold voltage VRF=0.21V at 1.5A maximum current."+      },+      {+        "number": "18",+        "name": "PGND",+        "type": "power_in",+        "description": "Power ground return for motor driver stage; 0V reference potential for high-current motor output circuits."+      },+      {+        "number": "19",+        "name": "S/S",+        "type": "input",+        "description": "Start/Stop control input; low level (0-1.65V) enables motor drive, high level (1.75-VREG) or open-circuit initiates short-brake mode."+      },+      {+        "number": "20",+        "name": "FG",+        "type": "output",+        "description": "1-HALL frequency generator output synchronized to motor commutation; open-drain output with maximum 14mA sink current."+      },+      {+        "number": "21",+        "name": "F/R",+        "type": "input",+        "description": "Forward/Reverse direction control input; low level (0-1.65V) selects reverse, high level (1.75-VREG) selects forward rotation."+      },+      {+        "number": "22",+        "name": "CSD",+        "type": "input",+        "description": "Current Stall Detection protection circuit input; detects stalled motor with timeout period 90×C µF seconds for external capacitor."+      },+      {+        "number": "23",+        "name": "PWMIN",+        "type": "input",+        "description": "PWM speed control input; recommended frequency 0.5-60kHz, logic 0 (0-1.65V) enables drive, logic 1 (1.75-VREG) disables drive."+      },+      {+        "number": "24",+        "name": "HB",+        "type": "input",+        "description": "HALL element bias voltage output; provides 3.6V typical bias (3.56-3.63V) for external HALL sensors with output current up to 700µA."+      },+      {+        "number": "25",+        "name": "EP",+        "type": "passive",+        "description": "Exposed pad (from the footprint; not named in the datasheet pin table)."+      }+    ],+    "provenance": {+      "extractor": "extract_pins 0.2",+      "factory_chain": {+        "factory": "2.0.0",+        "extractor": "extract_pins 0.2",+        "primary_model": "claude-haiku-4-5-20251001",+        "primary_mode": "text",+        "consensus_model": "claude-sonnet-4-6",+        "consensus": "agreed",+        "guards": "pin_guards 0.1: passed",+        "guard_notes": [+          "exposed pad 25 added from the footprint"+        ],+        "pages_sent": 14,+        "cost_usd": 0.3246,+        "at": "2026-09-21T20:01:32"+      },+      "datasheet": {+        "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588883841679568896",+        "pages": 14,+        "sha256": "be3f0330743d11b8",+        "source_tier": "lcsc"+      },+      "cad": "KiCad official (CC-BY-SA 4.0)",+      "pins": {+        "total": 25,+        "described": 25,+        "cites_pages": true,+        "refuses_to_fabricate": true+      }+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    }+  },+  "visibility": "public",+  "org": "adom",+  "author": {+    "name": "Ray",+    "email": "[email protected]"+  }+}\ No newline at end of file