← Commit history

Initial commit: component/ms721

Ray ·bd849655e9 ·
2 files changed +242
README.mdadded+53
@@ -0,0 +1,53 @@+# MS721++**Hangzhou Ruimeng Tech** · Interface - Specialized · SOP-16++MS721 from Hangzhou Ruimeng Tech, in a SOP-16. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | BUSL2 | bidirectional | M-Bus interface port 2, part of ±50V differential pair for modulated half-duplex UART communication in both receive (voltage modulation detection) and transmit (current modulation) modes. |+| 2 | VB | power_in | Rectified bus voltage input from internal bridge rectifier providing DC voltage to internal reference circuits with minimum 9.3V in receive mode. |+| 3 | STC | passive | Supply storage capacitor connection port for 3.3V internal regulator, operating voltage range 3.8V to 6.4V with external capacitor CSTC. |+| 4 | RIDD | passive | External current-setting resistor connection (13kΩ to 80kΩ) that determines supply charging current ISTC for storage capacitor. |+| 5 | PF | output | Power failure signal output; outputs high (VBAT-0.6V to VBAT) when VVST > VSTC+0.6V indicating power good, low when power fails to alert MCU. |+| 6 | SC | passive | Sampling capacitor connection port for dynamic reference level circuit with external capacitor CSC charged at 40× discharge rate ratio (ISCcharge/ISCdischarge = 40). |+| 7 | TXI | output | Inverted UART data output from receive comparator TC3 with voltage levels 0V to 1.5V (low) or VBAT-0.6V to VBAT (high). |+| 8 | TX | output | UART data output from receive comparator TC3 decoded from M-Bus voltage modulation with voltage levels 0V to 1.5V (low) or VBAT-0.6V to VBAT (high). |+| 9 | BAT | power_in | Battery or auxiliary supply voltage input for logic level adjustment, operating range 2.5V to 3.8V recommended or -0.3V to 5.5V absolute maximum. |+| 10 | VS | power_in | Power source selection output synchronized with VDD; outputs VSTC-0.4V when powered from bus or high-impedance (0.3MΩ to 1MΩ) when battery powered to control external switching transistor. |+| 11 | VDD | power_out | Regulated 3.3V power supply output from internal voltage regulator with output voltage 3.1V to 3.4V at 1mA load and 5Ω output impedance. |+| 12 | RX | input | UART data input from microcontroller for slave-to-master transmission, accepts 0V to 0.8V (logic low) or VBAT-0.8V to 5.5V (logic high) levels. |+| 13 | RXI | input | Inverted UART data input from microcontroller for half-duplex M-Bus communication, accepts 0V to 0.8V (logic low) or VBAT-0.8V to 5.5V (logic high) with ECHO feedback to TX/TXI. |+| 14 | RIS | passive | External current-setting resistor connection (100Ω to 1000Ω typical) that determines transmission current source CS3 modulation current IMC of 11.5mA to 19.5mA. |+| 15 | GND | power_in | Ground reference port providing 0V reference point for all voltage measurements and internal circuit return path. |+| 16 | BUSL1 | bidirectional | M-Bus interface port 1, part of ±50V differential pair for modulated half-duplex UART communication in both receive (voltage modulation detection) and transmit (current modulation) modes. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Hangzhou Ruimeng Tech |+| Package | SOP-16 |+| Category | Interface |+| Pins | 16 |++## CAD (KiCad official)++- Symbol: `MS721`+- Footprint: `Package_SO:SOIC-16_3.9x9.9mm_P1.27mm`+- 3D model: SOP-16 (KiCad packages3D, STEP)+- 3D model files: `ms721-etched.step` / `ms721-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `ms721.step` / `ms721.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Hangzhou Ruimeng Tech datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588906199660445696) (13 pp, sha256 `6e4072a947be3631`, retrieved 2026-09-22, tier: lcsc)+- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.2`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-4-6` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/ms721-datasheet.pdf)
page.jsonadded+189
@@ -0,0 +1,189 @@+{+  "slug": "ms721",+  "version": "0.1.0",+  "type": "component",+  "description": "Hangzhou Ruimeng Tech Interface - Specialized, SOP-16. Datasheet-verified pinout, KiCad symbol/footprint/3D.",+  "tags": [+    "component",+    "interface",+    "ms721",+    "factory-2.0.0",+    "extractor-text"+  ],+  "dependencies": {},+  "hero": {+    "type": "image",+    "path": "docs/hero.png"+  },+  "files": [+    "page.json",+    "README.md",+    "ms721.kicad_sym",+    "ms721.kicad_mod",+    "ms721.glb",+    "ms721.step",+    "ms721.lbr",+    "docs/hero.png",+    "docs/ms721-datasheet.pdf",+    "viewers/symbol.html",+    "viewers/footprint.html"+  ],+  "component": {+    "mpn": "MS721",+    "manufacturer": "Hangzhou Ruimeng Tech",+    "package": "SOP-16",+    "pin_count": 16,+    "category": "Interface",+    "subcategory": "Interface - Specialized",+    "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588906199660445696",+    "parts": {+      "symbol": "ms721.kicad_sym",+      "footprint": "ms721.kicad_mod",+      "model_3d": "ms721-etched.glb",+      "model_3d_plain": "ms721.glb",+      "model_3d_step": "ms721-etched.step",+      "model_3d_step_plain": "ms721.step",+      "lbr": "ms721.lbr"+    },+    "distributor_links": {+      "lcsc": "C1509069"+    },+    "pins": [+      {+        "number": "1",+        "name": "BUSL2",+        "type": "bidirectional",+        "description": "M-Bus interface port 2, part of ±50V differential pair for modulated half-duplex UART communication in both receive (voltage modulation detection) and transmit (current modulation) modes."+      },+      {+        "number": "2",+        "name": "VB",+        "type": "power_in",+        "description": "Rectified bus voltage input from internal bridge rectifier providing DC voltage to internal reference circuits with minimum 9.3V in receive mode."+      },+      {+        "number": "3",+        "name": "STC",+        "type": "passive",+        "description": "Supply storage capacitor connection port for 3.3V internal regulator, operating voltage range 3.8V to 6.4V with external capacitor CSTC."+      },+      {+        "number": "4",+        "name": "RIDD",+        "type": "passive",+        "description": "External current-setting resistor connection (13kΩ to 80kΩ) that determines supply charging current ISTC for storage capacitor."+      },+      {+        "number": "5",+        "name": "PF",+        "type": "output",+        "description": "Power failure signal output; outputs high (VBAT-0.6V to VBAT) when VVST > VSTC+0.6V indicating power good, low when power fails to alert MCU."+      },+      {+        "number": "6",+        "name": "SC",+        "type": "passive",+        "description": "Sampling capacitor connection port for dynamic reference level circuit with external capacitor CSC charged at 40× discharge rate ratio (ISCcharge/ISCdischarge = 40)."+      },+      {+        "number": "7",+        "name": "TXI",+        "type": "output",+        "description": "Inverted UART data output from receive comparator TC3 with voltage levels 0V to 1.5V (low) or VBAT-0.6V to VBAT (high)."+      },+      {+        "number": "8",+        "name": "TX",+        "type": "output",+        "description": "UART data output from receive comparator TC3 decoded from M-Bus voltage modulation with voltage levels 0V to 1.5V (low) or VBAT-0.6V to VBAT (high)."+      },+      {+        "number": "9",+        "name": "BAT",+        "type": "power_in",+        "description": "Battery or auxiliary supply voltage input for logic level adjustment, operating range 2.5V to 3.8V recommended or -0.3V to 5.5V absolute maximum."+      },+      {+        "number": "10",+        "name": "VS",+        "type": "power_in",+        "description": "Power source selection output synchronized with VDD; outputs VSTC-0.4V when powered from bus or high-impedance (0.3MΩ to 1MΩ) when battery powered to control external switching transistor."+      },+      {+        "number": "11",+        "name": "VDD",+        "type": "power_out",+        "description": "Regulated 3.3V power supply output from internal voltage regulator with output voltage 3.1V to 3.4V at 1mA load and 5Ω output impedance."+      },+      {+        "number": "12",+        "name": "RX",+        "type": "input",+        "description": "UART data input from microcontroller for slave-to-master transmission, accepts 0V to 0.8V (logic low) or VBAT-0.8V to 5.5V (logic high) levels."+      },+      {+        "number": "13",+        "name": "RXI",+        "type": "input",+        "description": "Inverted UART data input from microcontroller for half-duplex M-Bus communication, accepts 0V to 0.8V (logic low) or VBAT-0.8V to 5.5V (logic high) with ECHO feedback to TX/TXI."+      },+      {+        "number": "14",+        "name": "RIS",+        "type": "passive",+        "description": "External current-setting resistor connection (100Ω to 1000Ω typical) that determines transmission current source CS3 modulation current IMC of 11.5mA to 19.5mA."+      },+      {+        "number": "15",+        "name": "GND",+        "type": "power_in",+        "description": "Ground reference port providing 0V reference point for all voltage measurements and internal circuit return path."+      },+      {+        "number": "16",+        "name": "BUSL1",+        "type": "bidirectional",+        "description": "M-Bus interface port 1, part of ±50V differential pair for modulated half-duplex UART communication in both receive (voltage modulation detection) and transmit (current modulation) modes."+      }+    ],+    "provenance": {+      "extractor": "extract_pins 0.2",+      "factory_chain": {+        "factory": "2.0.0",+        "extractor": "extract_pins 0.2",+        "primary_model": "claude-haiku-4-5-20251001",+        "primary_mode": "text",+        "consensus_model": "claude-sonnet-4-6",+        "consensus": "agreed",+        "guards": "pin_guards 0.1: passed",+        "guard_notes": [],+        "pages_sent": 13,+        "cost_usd": 0.225,+        "at": "2026-09-22T08:21:10"+      },+      "datasheet": {+        "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588906199660445696",+        "pages": 13,+        "sha256": "6e4072a947be3631",+        "source_tier": "lcsc"+      },+      "cad": "KiCad official (CC-BY-SA 4.0)",+      "pins": {+        "total": 16,+        "described": 16,+        "cites_pages": true,+        "refuses_to_fabricate": true+      }+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    }+  },+  "visibility": "public",+  "org": "adom",+  "author": {+    "name": "Ray",+    "email": "[email protected]"+  }+}\ No newline at end of file