← Commit history

ms721: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding)

Ray ·3d4bc7610f · ·parent 8450e83
2 files changed +91−11
package.json+49−9
@@ -53,7 +53,7 @@         "number": "1",         "name": "BUSL2",         "type": "bidirectional",-        "description": "M-Bus interface port 2, part of \u00b150V differential pair for modulated half-duplex UART communication in both receive (voltage modulation detection) and transmit (current modulation) modes."+        "description": "M-Bus interface port 2, part of ±50V differential pair for modulated half-duplex UART communication in both receive (voltage modulation detection) and transmit (current modulation) modes."       },       {         "number": "2",@@ -71,7 +71,7 @@         "number": "4",         "name": "RIDD",         "type": "passive",-        "description": "External current-setting resistor connection (13k\u03a9 to 80k\u03a9) that determines supply charging current ISTC for storage capacitor."+        "description": "External current-setting resistor connection (13kΩ to 80kΩ) that determines supply charging current ISTC for storage capacitor."       },       {         "number": "5",@@ -83,7 +83,7 @@         "number": "6",         "name": "SC",         "type": "passive",-        "description": "Sampling capacitor connection port for dynamic reference level circuit with external capacitor CSC charged at 40\u00d7 discharge rate ratio (ISCcharge/ISCdischarge = 40)."+        "description": "Sampling capacitor connection port for dynamic reference level circuit with external capacitor CSC charged at 40× discharge rate ratio (ISCcharge/ISCdischarge = 40)."       },       {         "number": "7",@@ -107,13 +107,13 @@         "number": "10",         "name": "VS",         "type": "power_in",-        "description": "Power source selection output synchronized with VDD; outputs VSTC-0.4V when powered from bus or high-impedance (0.3M\u03a9 to 1M\u03a9) when battery powered to control external switching transistor."+        "description": "Power source selection output synchronized with VDD; outputs VSTC-0.4V when powered from bus or high-impedance (0.3MΩ to 1MΩ) when battery powered to control external switching transistor."       },       {         "number": "11",         "name": "VDD",         "type": "power_out",-        "description": "Regulated 3.3V power supply output from internal voltage regulator with output voltage 3.1V to 3.4V at 1mA load and 5\u03a9 output impedance."+        "description": "Regulated 3.3V power supply output from internal voltage regulator with output voltage 3.1V to 3.4V at 1mA load and 5Ω output impedance."       },       {         "number": "12",@@ -131,7 +131,7 @@         "number": "14",         "name": "RIS",         "type": "passive",-        "description": "External current-setting resistor connection (100\u03a9 to 1000\u03a9 typical) that determines transmission current source CS3 modulation current IMC of 11.5mA to 19.5mA."+        "description": "External current-setting resistor connection (100Ω to 1000Ω typical) that determines transmission current source CS3 modulation current IMC of 11.5mA to 19.5mA."       },       {         "number": "15",@@ -143,7 +143,7 @@         "number": "16",         "name": "BUSL1",         "type": "bidirectional",-        "description": "M-Bus interface port 1, part of \u00b150V differential pair for modulated half-duplex UART communication in both receive (voltage modulation detection) and transmit (current modulation) modes."+        "description": "M-Bus interface port 1, part of ±50V differential pair for modulated half-duplex UART communication in both receive (voltage modulation detection) and transmit (current modulation) modes."       }     ],     "provenance": {@@ -178,6 +178,46 @@     "viewers": {       "symbol": "viewers/symbol.html",       "footprint": "viewers/footprint.html"-    }+    },+    "models_3d": [+      {+        "file": "ms721.step",+        "role": "plain",+        "up": "Z",+        "units": "mm",+        "origin": "footprint origin = pad-pattern centre",+        "seat": "z = 0",+        "extents_mm": [+          6.0,+          9.9,+          1.75+        ],+        "zmin_mm": -0.0,+        "centre_offset_mm": 0.0,+        "footprint_binding": "identity",+        "sha256": "d5eeddb4c0b304dc61950919b126fc61d7586abd5f16ab71a2a79759ec6498bf",+        "checked": "2026-10-07",+        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+      },+      {+        "file": "ms721-etched.step",+        "role": "eda",+        "up": "Z",+        "units": "mm",+        "origin": "footprint origin = pad-pattern centre",+        "seat": "z = 0",+        "extents_mm": [+          6.0,+          9.9,+          1.75+        ],+        "zmin_mm": -0.0,+        "centre_offset_mm": 0.0,+        "footprint_binding": "identity",+        "sha256": "3c9397f4c204dd4f27783e09280edded143bc048c9ef90893d6e1fcdd90287f7",+        "checked": "2026-10-07",+        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+      }+    ]   }-}\ No newline at end of file+}
page.json+42−2
@@ -163,7 +163,47 @@     "viewers": {       "symbol": "viewers/symbol.html",       "footprint": "viewers/footprint.html"-    }+    },+    "models_3d": [+      {+        "file": "ms721.step",+        "role": "plain",+        "up": "Z",+        "units": "mm",+        "origin": "footprint origin = pad-pattern centre",+        "seat": "z = 0",+        "extents_mm": [+          6.0,+          9.9,+          1.75+        ],+        "zmin_mm": -0.0,+        "centre_offset_mm": 0.0,+        "footprint_binding": "identity",+        "sha256": "d5eeddb4c0b304dc61950919b126fc61d7586abd5f16ab71a2a79759ec6498bf",+        "checked": "2026-10-07",+        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+      },+      {+        "file": "ms721-etched.step",+        "role": "eda",+        "up": "Z",+        "units": "mm",+        "origin": "footprint origin = pad-pattern centre",+        "seat": "z = 0",+        "extents_mm": [+          6.0,+          9.9,+          1.75+        ],+        "zmin_mm": -0.0,+        "centre_offset_mm": 0.0,+        "footprint_binding": "identity",+        "sha256": "3c9397f4c204dd4f27783e09280edded143bc048c9ef90893d6e1fcdd90287f7",+        "checked": "2026-10-07",+        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+      }+    ]   },   "metadata": {     "specs": {@@ -211,4 +251,4 @@     "public": true   },   "updated_at": "2026-09-25T02:23:03.703Z"-}\ No newline at end of file+}