← Commit history
README.mdadded+63@@ -0,0 +1,63 @@+# MS51FC0AE++**Nuvoton Tech** · Microcontrollers (MCU/MPU/SOC) · TSSOP-20++MS51FC0AE from Nuvoton Tech, in a TSSOP-20. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | P0.5/ADC_CH4/PWM0_CH2/PWM2_CH0/UART3_TXD/T0/IC6 | bidirectional | Port 0 bit 5. Multiplexed with ADC input channel 4, PWM0 channel 2, PWM2 channel 0, UART3 TXD, Timer/Counter 0 external count input (T0), and Timer2 input capture channel 6. |+| 2 | P0.6/ADC_CH3/UART0_TXD | bidirectional | Port 0 bit 6. Multiplexed with ADC input channel 3 and UART0 transmit data output. |+| 3 | P0.7/ADC_CH2/UART0_RXD | bidirectional | Port 0 bit 7. Multiplexed with ADC input channel 2 and UART0 receive data input. UART0_TXD and UART0_RXD are software-exchangeable via AUXR1.2. |+| 4 | P2.0/nRESET | input | Combined Port 2 bit 0 (input-only when CONFIG0.2 RPD is programmed to 0) and Schmitt-trigger active-low hardware reset. nRESET has an internal pull-up; a low level on this pin resets the device. |+| 5 | P3.0/ADC_CH1/SPI0_MOSI/UART2_TXD/INT0/OSCIN/SC0_CLK | bidirectional | Port 3 bit 0. Multiplexed with ADC channel 1, SPI0 MOSI, UART2 TXD, external interrupt 0 (INT0), external clock input (OSCIN when EXTEN[1:0]=11b), and Smart Card 0 clock (SC0_CLK). |+| 6 | P1.7/ADC_CH0/SPI0_CLK/UART2_RXD/INT1/SC0_DAT | bidirectional | Port 1 bit 7. Multiplexed with ADC channel 0, SPI0 clock, UART2 RXD, external interrupt 1 (INT1), and Smart Card 0 data pin. |+| 7 | VSS | power_in | Ground potential (0 V) reference for digital and analog supplies. |+| 8 | P1.6/I2C0_SDA/UART1_TXD/ICE_DAT | bidirectional | Port 1 bit 6. Multiplexed with I2C0 data line (SDA), UART1 transmit data output, and ICE/ICP debug data pin. |+| 9 | VDD | power_in | Positive supply voltage for chip operation. Recommended operating range per Section 8.1 general operating conditions. |+| 10 | P1.5/PWM0_CH5/PWM3_CH1/SPI0_SS/UART3_TXD/SC1_CLK/IC7 | bidirectional | Port 1 bit 5. Multiplexed with PWM0 channel 5, PWM3 channel 1, SPI0 slave-select, UART3 TXD, Smart Card 1 clock, and Timer2 input capture channel 7. |+| 11 | P1.4/ADC_CH14/PWM0_CH1/PWM1_CH1/I2C0_SDA/PWM0_BRAKE | bidirectional | Port 1 bit 4. Multiplexed with ADC channel 14, PWM0/PWM1 channel 1, I2C0 data (alternate mapping via I2CPX), and PWM0 fault-brake input. |+| 12 | P1.3/ADC_CH13/I2C0_SCL/STADC | bidirectional | Port 1 bit 3. Multiplexed with ADC channel 13, I2C0 clock, and external ADC start trigger (STADC). |+| 13 | P1.2/PWM0_CH0/PWM1_CH0/UART3_TXD/SC1_CLK/IC0 | bidirectional | Port 1 bit 2. Multiplexed with PWM0/PWM1 channel 0, UART3 TXD, Smart Card 1 clock, and Timer2 input capture channel 0. |+| 14 | P1.1/ADC_CH7/PWM0_CH1/PWM1_CH1/UART3_RXD/SC1_DAT/CLKO/IC1 | bidirectional | Port 1 bit 1. Multiplexed with ADC channel 7, PWM0/PWM1 channel 1, UART3 RXD, Smart Card 1 data, system clock output (CLKO), and Timer2 input capture channel 1. |+| 15 | P1.0/PWM0_CH2/PWM2_CH0/SPI0_CLK/UART1_TXD/IC2 | bidirectional | Port 1 bit 0. Multiplexed with PWM0 channel 2, PWM2 channel 0, SPI0 clock, UART1 TXD (note: table also labels this UART1_RX; verify with device errata), and Timer2 input capture channel 2. |+| 16 | P0.0/PWM0_CH3/PWM2_CH1/SPI0_MOSI/UART1_RXD/XT1_IN/OSCIN/T1/IC3 | bidirectional | Port 0 bit 0. Multiplexed with PWM0 channel 3, PWM2 channel 1, SPI0 MOSI, UART1 RXD, external 4-24 MHz crystal input (XT1_IN / HXTIN), external clock input (OSCIN when EXTEN[1:0]=10b), Timer/Counter 1 external input (T1), and Timer2 input capture channel 3. |+| 17 | P0.1/PWM0_CH4/PWM3_CH0/SPI0_MISO/XT1_OUT/HXTOUT/IC4 | bidirectional | Port 0 bit 1. Multiplexed with PWM0 channel 4, PWM3 channel 0, SPI0 MISO, external 4-24 MHz crystal output (XT1_OUT / HXTOUT), and Timer2 input capture channel 4. |+| 18 | P0.2/I2C0_SCL/UART1_RXD/ICE_CLK | bidirectional | Port 0 bit 2. Multiplexed with I2C0 clock, UART1 RXD, and ICE/ICP debug clock input. |+| 19 | P0.3/ADC_CH6/PWM0_CH5/PWM3_CH1/UART2_TXD/SC0_CLK/IC5 | bidirectional | Port 0 bit 3. Multiplexed with ADC channel 6, PWM0 channel 5, PWM3 channel 1, UART2 TXD, Smart Card 0 clock, and Timer2 input capture channel 5. |+| 20 | P0.4/ADC_CH5/PWM0_CH3/PWM2_CH1/UART2_RXD/SC0_DAT/STADC/IC3 | bidirectional | Port 0 bit 4. Multiplexed with ADC channel 5, PWM0 channel 3, PWM2 channel 1, UART2 RXD, Smart Card 0 data, external ADC start trigger (STADC), and Timer2 input capture channel 3. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Nuvoton Tech |+| Package | TSSOP-20 |+| Category | MCU |+| Pins | 20 |++## Ordering variants++- `MS51FC0AE`+- `MS51FC0AEMS51XC0BE`+- `MS51FC0AEMS51EC0AE`+- `MS51FC0AEMS51PC0AE`+- `MS51FC0AEMS51TC0AE`++## CAD (KiCad official)++- Symbol: `MS51FC0AE`+- Footprint: `Package_SO:TSSOP-20_4.4x6.5mm_P0.65mm`+- 3D model: TSSOP-20 (KiCad packages3D, STEP)++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Nuvoton Tech datasheet](docs/ms51fc0ae-datasheet.pdf) (80 pp, sha256 `3ef54b54d90b3470`, retrieved 2026-08-17, tier: lcsc)+- **Extractor:** `ds2sf` (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/ms51fc0ae-datasheet.pdf)
page.jsonadded+34@@ -0,0 +1,34 @@+{+ "slug": "ms51fc0ae",+ "version": "0.1.0",+ "type": "component",+ "description": "Nuvoton Tech Microcontrollers (MCU/MPU/SOC), TSSOP-20. Datasheet-verified pinout, KiCad symbol/footprint/3D.",+ "tags": [+ "component",+ "mcu",+ "ms51fc0ae"+ ],+ "dependencies": {},+ "hero": {+ "type": "image",+ "path": "docs/hero.png"+ },+ "files": [+ "page.json",+ "README.md",+ "ms51fc0ae.kicad_sym",+ "ms51fc0ae.kicad_mod",+ "ms51fc0ae.glb",+ "ms51fc0ae.step",+ "ms51fc0ae.lbr",+ "docs/hero.png",+ "docs/ms51fc0ae-datasheet.pdf",+ "viewers/symbol.html",+ "viewers/footprint.html"+ ],+ "visibility": "public",+ "author": {+ "name": "Ray",+ "email": "[email protected]"+ }+}