component
MS4931
Public Made by Adomby adom
Hangzhou Ruimeng Tech Brushless DC (BLDC) Motor Driver, VQFN-28-EP(5x5). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
← Commit history
README.mdadded+66@@ -0,0 +1,66 @@+# MS4931++**Hangzhou Ruimeng Tech** · Brushless DC (BLDC) Motor Driver · VQFN-28-EP(5x5)++MS4931 from Hangzhou Ruimeng Tech, in a VQFN-28-EP(5x5). Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | HA+ | input | HALL signal positive input for phase A (logic high when IN+ exceeds IN-, logic low when IN- exceeds IN+) |+| 2 | HA- | input | HALL signal negative input for phase A (logic inverse of HA+ differential pair) |+| 3 | HB+ | input | HALL signal positive input for phase B (logic high when IN+ exceeds IN-, logic low when IN- exceeds IN+) |+| 4 | HB- | input | HALL signal negative input for phase B (logic inverse of HB+ differential pair) |+| 5 | HC+ | input | HALL signal positive input for phase C (logic high when IN+ exceeds IN-, logic low when IN- exceeds IN+) |+| 6 | HC- | input | HALL signal negative input for phase C (logic inverse of HC+ differential pair) |+| 7 | GND | power_in | Logical ground reference for gate drive and control circuits |+| 8 | HBIAS | power_out | 5V regulated output for logic power supply with output voltage 5.58-5.66V at −5mA load and 7mV line regulation from 8-35V |+| 9 | CP1 | bidirectional | Charge pump capacitor connection pad, 1µF external capacitor typically connected between CP1 and CP2 with 50kHz charge pump frequency |+| 10 | CP2 | bidirectional | Charge pump capacitor connection pad, 1µF external capacitor typically connected between CP1 and CP2 with 50kHz charge pump frequency |+| 11 | VBB | power_in | Power supply input for gate drive circuits with operating range 8V to 35V and absolute maximum rating of 36V |+| 12 | VCP | power_out | Charge pump output voltage approximately VBB+5.2V for high-side gate driver floating supply with external capacitor to VBB typically 1-10µF |+| 13 | SENSE | output | Output current sensing signal proportional to gate drive current with reference voltage 500mV at 1A current |+| 14 | GLC | output | Low-side gate driver output for phase C with gate output voltage 5.6V and gate drive current ±20-30mA |+| 15 | GLB | output | Low-side gate driver output for phase B with gate output voltage 5.6V and gate drive current ±20-30mA |+| 16 | GLA | output | Low-side gate driver output for phase A with gate output voltage 5.6V and gate drive current ±20-30mA |+| 17 | GHC | output | High-side gate driver output for phase C with gate voltage VBB+5.2V and gate drive current ±20-30mA referenced to SC |+| 18 | SC | output | High-side MOSFET source connection for phase C, must connect directly to the source of the upper power FET for gate drive reference |+| 19 | GHB | output | High-side gate driver output for phase B with gate voltage VBB+5.2V and gate drive current ±20-30mA referenced to SB |+| 20 | SB | output | High-side MOSFET source connection for phase B, must connect directly to the source of the upper power FET for gate drive reference |+| 21 | GHA | output | High-side gate driver output for phase A with gate voltage VBB+5.2V and gate drive current ±20-30mA referenced to SA |+| 22 | SA | output | High-side MOSFET source connection for phase A, must connect directly to the source of the upper power FET for gate drive reference |+| 23 | FG1 | output | FG1 speed feedback output for three-phase motor speed control with open-drain configuration |+| 24 | FG2 | output | FG2 speed feedback output for single-phase motor speed control with open-drain configuration |+| 25 | CLD | bidirectional | Stall protection capacitor connection pad where protection time delay equals 90×C(µF) seconds with typical 0.022µF providing approximately 2 seconds |+| 26 | DIR | input | Motor rotation direction control input with logic high (≥1.75V) for forward rotation and logic low (≤1.65V) for reverse rotation |+| 27 | ENABLE | input | External PWM speed control input accepting pulse trains at 0.5-60kHz frequency for variable speed control |+| 28 | BREAKZ | input | Motor brake control input (active low), logic low (≤1.65V) grounds all output MOSFETs for braking, high/open-circuit (≥1.75V) enables normal operation |+| 29 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Hangzhou Ruimeng Tech |+| Package | VQFN-28-EP(5x5) |+| Category | Motor Driver ICs |+| Pins | 29 |++## CAD (KiCad official)++- Symbol: `MS4931`+- Footprint: `Package_DFN_QFN:QFN-28-1EP_5x5mm_P0.5mm_EP3.35x3.35mm`+- 3D model: VQFN-28-EP(5x5) (KiCad packages3D, STEP)+- 3D model files: `ms4931-etched.step` / `ms4931-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `ms4931.step` / `ms4931.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Hangzhou Ruimeng Tech datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588883602192523264) (14 pp, sha256 `becf7ad012f9d840`, retrieved 2026-09-22, tier: lcsc)+- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.2`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-4-6` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/ms4931-datasheet.pdf)
page.jsonadded+269@@ -0,0 +1,269 @@+{+ "slug": "ms4931",+ "version": "0.1.0",+ "type": "component",+ "description": "Hangzhou Ruimeng Tech Brushless DC (BLDC) Motor Driver, VQFN-28-EP(5x5). Datasheet-verified pinout, KiCad symbol/footprint/3D.",+ "tags": [+ "component",+ "motor driver ics",+ "ms4931",+ "factory-2.0.0",+ "extractor-text"+ ],+ "dependencies": {},+ "hero": {+ "type": "image",+ "path": "docs/hero.png"+ },+ "files": [+ "page.json",+ "README.md",+ "ms4931.kicad_sym",+ "ms4931.kicad_mod",+ "ms4931.glb",+ "ms4931.step",+ "ms4931.lbr",+ "docs/hero.png",+ "docs/ms4931-datasheet.pdf",+ "viewers/symbol.html",+ "viewers/footprint.html"+ ],+ "component": {+ "mpn": "MS4931",+ "manufacturer": "Hangzhou Ruimeng Tech",+ "package": "VQFN-28-EP(5x5)",+ "pin_count": 29,+ "category": "Motor Driver ICs",+ "subcategory": "Brushless DC (BLDC) Motor Driver",+ "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588883602192523264",+ "parts": {+ "symbol": "ms4931.kicad_sym",+ "footprint": "ms4931.kicad_mod",+ "model_3d": "ms4931-etched.glb",+ "model_3d_plain": "ms4931.glb",+ "model_3d_step": "ms4931-etched.step",+ "model_3d_step_plain": "ms4931.step",+ "lbr": "ms4931.lbr"+ },+ "distributor_links": {+ "lcsc": "C231944"+ },+ "pins": [+ {+ "number": "1",+ "name": "HA+",+ "type": "input",+ "description": "HALL signal positive input for phase A (logic high when IN+ exceeds IN-, logic low when IN- exceeds IN+)"+ },+ {+ "number": "2",+ "name": "HA-",+ "type": "input",+ "description": "HALL signal negative input for phase A (logic inverse of HA+ differential pair)"+ },+ {+ "number": "3",+ "name": "HB+",+ "type": "input",+ "description": "HALL signal positive input for phase B (logic high when IN+ exceeds IN-, logic low when IN- exceeds IN+)"+ },+ {+ "number": "4",+ "name": "HB-",+ "type": "input",+ "description": "HALL signal negative input for phase B (logic inverse of HB+ differential pair)"+ },+ {+ "number": "5",+ "name": "HC+",+ "type": "input",+ "description": "HALL signal positive input for phase C (logic high when IN+ exceeds IN-, logic low when IN- exceeds IN+)"+ },+ {+ "number": "6",+ "name": "HC-",+ "type": "input",+ "description": "HALL signal negative input for phase C (logic inverse of HC+ differential pair)"+ },+ {+ "number": "7",+ "name": "GND",+ "type": "power_in",+ "description": "Logical ground reference for gate drive and control circuits"+ },+ {+ "number": "8",+ "name": "HBIAS",+ "type": "power_out",+ "description": "5V regulated output for logic power supply with output voltage 5.58-5.66V at −5mA load and 7mV line regulation from 8-35V"+ },+ {+ "number": "9",+ "name": "CP1",+ "type": "bidirectional",+ "description": "Charge pump capacitor connection pad, 1µF external capacitor typically connected between CP1 and CP2 with 50kHz charge pump frequency"+ },+ {+ "number": "10",+ "name": "CP2",+ "type": "bidirectional",+ "description": "Charge pump capacitor connection pad, 1µF external capacitor typically connected between CP1 and CP2 with 50kHz charge pump frequency"+ },+ {+ "number": "11",+ "name": "VBB",+ "type": "power_in",+ "description": "Power supply input for gate drive circuits with operating range 8V to 35V and absolute maximum rating of 36V"+ },+ {+ "number": "12",+ "name": "VCP",+ "type": "power_out",+ "description": "Charge pump output voltage approximately VBB+5.2V for high-side gate driver floating supply with external capacitor to VBB typically 1-10µF"+ },+ {+ "number": "13",+ "name": "SENSE",+ "type": "output",+ "description": "Output current sensing signal proportional to gate drive current with reference voltage 500mV at 1A current"+ },+ {+ "number": "14",+ "name": "GLC",+ "type": "output",+ "description": "Low-side gate driver output for phase C with gate output voltage 5.6V and gate drive current ±20-30mA"+ },+ {+ "number": "15",+ "name": "GLB",+ "type": "output",+ "description": "Low-side gate driver output for phase B with gate output voltage 5.6V and gate drive current ±20-30mA"+ },+ {+ "number": "16",+ "name": "GLA",+ "type": "output",+ "description": "Low-side gate driver output for phase A with gate output voltage 5.6V and gate drive current ±20-30mA"+ },+ {+ "number": "17",+ "name": "GHC",+ "type": "output",+ "description": "High-side gate driver output for phase C with gate voltage VBB+5.2V and gate drive current ±20-30mA referenced to SC"+ },+ {+ "number": "18",+ "name": "SC",+ "type": "output",+ "description": "High-side MOSFET source connection for phase C, must connect directly to the source of the upper power FET for gate drive reference"+ },+ {+ "number": "19",+ "name": "GHB",+ "type": "output",+ "description": "High-side gate driver output for phase B with gate voltage VBB+5.2V and gate drive current ±20-30mA referenced to SB"+ },+ {+ "number": "20",+ "name": "SB",+ "type": "output",+ "description": "High-side MOSFET source connection for phase B, must connect directly to the source of the upper power FET for gate drive reference"+ },+ {+ "number": "21",+ "name": "GHA",+ "type": "output",+ "description": "High-side gate driver output for phase A with gate voltage VBB+5.2V and gate drive current ±20-30mA referenced to SA"+ },+ {+ "number": "22",+ "name": "SA",+ "type": "output",+ "description": "High-side MOSFET source connection for phase A, must connect directly to the source of the upper power FET for gate drive reference"+ },+ {+ "number": "23",+ "name": "FG1",+ "type": "output",+ "description": "FG1 speed feedback output for three-phase motor speed control with open-drain configuration"+ },+ {+ "number": "24",+ "name": "FG2",+ "type": "output",+ "description": "FG2 speed feedback output for single-phase motor speed control with open-drain configuration"+ },+ {+ "number": "25",+ "name": "CLD",+ "type": "bidirectional",+ "description": "Stall protection capacitor connection pad where protection time delay equals 90×C(µF) seconds with typical 0.022µF providing approximately 2 seconds"+ },+ {+ "number": "26",+ "name": "DIR",+ "type": "input",+ "description": "Motor rotation direction control input with logic high (≥1.75V) for forward rotation and logic low (≤1.65V) for reverse rotation"+ },+ {+ "number": "27",+ "name": "ENABLE",+ "type": "input",+ "description": "External PWM speed control input accepting pulse trains at 0.5-60kHz frequency for variable speed control"+ },+ {+ "number": "28",+ "name": "BREAKZ",+ "type": "input",+ "description": "Motor brake control input (active low), logic low (≤1.65V) grounds all output MOSFETs for braking, high/open-circuit (≥1.75V) enables normal operation"+ },+ {+ "number": "29",+ "name": "EP",+ "type": "passive",+ "description": "Exposed pad (from the footprint; not named in the datasheet pin table)."+ }+ ],+ "provenance": {+ "extractor": "extract_pins 0.2",+ "factory_chain": {+ "factory": "2.0.0",+ "extractor": "extract_pins 0.2",+ "primary_model": "claude-haiku-4-5-20251001",+ "primary_mode": "text",+ "consensus_model": "claude-sonnet-4-6",+ "consensus": "agreed",+ "guards": "pin_guards 0.1: passed",+ "guard_notes": [+ "exposed pad 29 added from the footprint"+ ],+ "pages_sent": 14,+ "cost_usd": 0.3858,+ "at": "2026-09-22T11:14:56"+ },+ "datasheet": {+ "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588883602192523264",+ "pages": 14,+ "sha256": "becf7ad012f9d840",+ "source_tier": "lcsc"+ },+ "cad": "KiCad official (CC-BY-SA 4.0)",+ "pins": {+ "total": 29,+ "described": 29,+ "cites_pages": true,+ "refuses_to_fabricate": true+ }+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ }+ },+ "visibility": "public",+ "org": "adom",+ "author": {+ "name": "Ray",+ "email": "[email protected]"+ }+}