← Commit history

ms4931: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding)

Ray ·8852ca7a99 · ·parent 31c3728
2 files changed +97−17
package.json+55−15
@@ -95,19 +95,19 @@         "number": "8",         "name": "HBIAS",         "type": "power_out",-        "description": "5V regulated output for logic power supply with output voltage 5.58-5.66V at \u22125mA load and 7mV line regulation from 8-35V"+        "description": "5V regulated output for logic power supply with output voltage 5.58-5.66V at −5mA load and 7mV line regulation from 8-35V"       },       {         "number": "9",         "name": "CP1",         "type": "bidirectional",-        "description": "Charge pump capacitor connection pad, 1\u00b5F external capacitor typically connected between CP1 and CP2 with 50kHz charge pump frequency"+        "description": "Charge pump capacitor connection pad, 1µF external capacitor typically connected between CP1 and CP2 with 50kHz charge pump frequency"       },       {         "number": "10",         "name": "CP2",         "type": "bidirectional",-        "description": "Charge pump capacitor connection pad, 1\u00b5F external capacitor typically connected between CP1 and CP2 with 50kHz charge pump frequency"+        "description": "Charge pump capacitor connection pad, 1µF external capacitor typically connected between CP1 and CP2 with 50kHz charge pump frequency"       },       {         "number": "11",@@ -119,7 +119,7 @@         "number": "12",         "name": "VCP",         "type": "power_out",-        "description": "Charge pump output voltage approximately VBB+5.2V for high-side gate driver floating supply with external capacitor to VBB typically 1-10\u00b5F"+        "description": "Charge pump output voltage approximately VBB+5.2V for high-side gate driver floating supply with external capacitor to VBB typically 1-10µF"       },       {         "number": "13",@@ -131,25 +131,25 @@         "number": "14",         "name": "GLC",         "type": "output",-        "description": "Low-side gate driver output for phase C with gate output voltage 5.6V and gate drive current \u00b120-30mA"+        "description": "Low-side gate driver output for phase C with gate output voltage 5.6V and gate drive current ±20-30mA"       },       {         "number": "15",         "name": "GLB",         "type": "output",-        "description": "Low-side gate driver output for phase B with gate output voltage 5.6V and gate drive current \u00b120-30mA"+        "description": "Low-side gate driver output for phase B with gate output voltage 5.6V and gate drive current ±20-30mA"       },       {         "number": "16",         "name": "GLA",         "type": "output",-        "description": "Low-side gate driver output for phase A with gate output voltage 5.6V and gate drive current \u00b120-30mA"+        "description": "Low-side gate driver output for phase A with gate output voltage 5.6V and gate drive current ±20-30mA"       },       {         "number": "17",         "name": "GHC",         "type": "output",-        "description": "High-side gate driver output for phase C with gate voltage VBB+5.2V and gate drive current \u00b120-30mA referenced to SC"+        "description": "High-side gate driver output for phase C with gate voltage VBB+5.2V and gate drive current ±20-30mA referenced to SC"       },       {         "number": "18",@@ -161,7 +161,7 @@         "number": "19",         "name": "GHB",         "type": "output",-        "description": "High-side gate driver output for phase B with gate voltage VBB+5.2V and gate drive current \u00b120-30mA referenced to SB"+        "description": "High-side gate driver output for phase B with gate voltage VBB+5.2V and gate drive current ±20-30mA referenced to SB"       },       {         "number": "20",@@ -173,7 +173,7 @@         "number": "21",         "name": "GHA",         "type": "output",-        "description": "High-side gate driver output for phase A with gate voltage VBB+5.2V and gate drive current \u00b120-30mA referenced to SA"+        "description": "High-side gate driver output for phase A with gate voltage VBB+5.2V and gate drive current ±20-30mA referenced to SA"       },       {         "number": "22",@@ -197,13 +197,13 @@         "number": "25",         "name": "CLD",         "type": "bidirectional",-        "description": "Stall protection capacitor connection pad where protection time delay equals 90\u00d7C(\u00b5F) seconds with typical 0.022\u00b5F providing approximately 2 seconds"+        "description": "Stall protection capacitor connection pad where protection time delay equals 90×C(µF) seconds with typical 0.022µF providing approximately 2 seconds"       },       {         "number": "26",         "name": "DIR",         "type": "input",-        "description": "Motor rotation direction control input with logic high (\u22651.75V) for forward rotation and logic low (\u22641.65V) for reverse rotation"+        "description": "Motor rotation direction control input with logic high (≥1.75V) for forward rotation and logic low (≤1.65V) for reverse rotation"       },       {         "number": "27",@@ -215,7 +215,7 @@         "number": "28",         "name": "BREAKZ",         "type": "input",-        "description": "Motor brake control input (active low), logic low (\u22641.65V) grounds all output MOSFETs for braking, high/open-circuit (\u22651.75V) enables normal operation"+        "description": "Motor brake control input (active low), logic low (≤1.65V) grounds all output MOSFETs for braking, high/open-circuit (≥1.75V) enables normal operation"       },       {         "number": "29",@@ -258,6 +258,46 @@     "viewers": {       "symbol": "viewers/symbol.html",       "footprint": "viewers/footprint.html"-    }+    },+    "models_3d": [+      {+        "file": "ms4931.step",+        "role": "plain",+        "up": "Z",+        "units": "mm",+        "origin": "footprint origin = pad-pattern centre",+        "seat": "z = 0",+        "extents_mm": [+          5.0,+          5.0,+          0.92+        ],+        "zmin_mm": 0.0,+        "centre_offset_mm": 0.0,+        "footprint_binding": "identity",+        "sha256": "e9d6d740f505b03e5aa0ac826330f9e269344b84656d051f50eb07ac162749eb",+        "checked": "2026-10-07",+        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+      },+      {+        "file": "ms4931-etched.step",+        "role": "eda",+        "up": "Z",+        "units": "mm",+        "origin": "footprint origin = pad-pattern centre",+        "seat": "z = 0",+        "extents_mm": [+          5.0,+          5.0,+          0.92+        ],+        "zmin_mm": 0.0,+        "centre_offset_mm": 0.0,+        "footprint_binding": "identity",+        "sha256": "dd04313c306f22c1e97a4c04c0e3ec867bd0b06a419e0c4ebdba3e6db0016cf7",+        "checked": "2026-10-07",+        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+      }+    ]   }-}\ No newline at end of file+}
page.json+42−2
@@ -243,7 +243,47 @@     "viewers": {       "symbol": "viewers/symbol.html",       "footprint": "viewers/footprint.html"-    }+    },+    "models_3d": [+      {+        "file": "ms4931.step",+        "role": "plain",+        "up": "Z",+        "units": "mm",+        "origin": "footprint origin = pad-pattern centre",+        "seat": "z = 0",+        "extents_mm": [+          5.0,+          5.0,+          0.92+        ],+        "zmin_mm": 0.0,+        "centre_offset_mm": 0.0,+        "footprint_binding": "identity",+        "sha256": "e9d6d740f505b03e5aa0ac826330f9e269344b84656d051f50eb07ac162749eb",+        "checked": "2026-10-07",+        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+      },+      {+        "file": "ms4931-etched.step",+        "role": "eda",+        "up": "Z",+        "units": "mm",+        "origin": "footprint origin = pad-pattern centre",+        "seat": "z = 0",+        "extents_mm": [+          5.0,+          5.0,+          0.92+        ],+        "zmin_mm": 0.0,+        "centre_offset_mm": 0.0,+        "footprint_binding": "identity",+        "sha256": "dd04313c306f22c1e97a4c04c0e3ec867bd0b06a419e0c4ebdba3e6db0016cf7",+        "checked": "2026-10-07",+        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+      }+    ]   },   "metadata": {     "specs": {@@ -291,4 +331,4 @@     "public": true   },   "updated_at": "2026-09-25T02:22:22.644Z"-}\ No newline at end of file+}