ms358

@@ -33,5 +33,78 @@   "author": {     "name": "Ray",     "email": "[email protected]"+  },+  "component": {+    "mpn": "MS358",+    "manufacturer": "Hangzhou Ruimeng Tech",+    "package": "SOP-8",+    "pin_count": 8,+    "category": "Operational Amplifier",+    "parts": {+      "symbol": "ms358.kicad_sym",+      "footprint": "ms358.kicad_mod",+      "model_3d": "ms358-etched.glb",+      "model_3d_plain": "ms358.glb",+      "model_3d_step": "ms358-etched.step",+      "model_3d_step_plain": "ms358.step",+      "lbr": "ms358.lbr"+    },+    "pins": [+      {+        "number": "1",+        "name": "OUT1",+        "type": "output",+        "description": "Output of op-amp A. Class-A output at small signals, class-B at large signals, sourcing up to ~30 mA and sinking up to ~8 mA at V+=15 V. Short-circuit-to-ground current is ~30-85 mA at V+=15 V; sustained shorts to V+ will destroy the die."+      },+      {+        "number": "2",+        "name": "IN1-",+        "type": "input",+        "description": "Inverting input of op-amp A. High-impedance PNP input with ~30 nA typical input bias current and ~3 mV typical input offset voltage. Absolute-max input voltage -0.3 V to 40 V; do not drive below V- - 0.3 V or the internal PNP base-collector diode will conduct."+      },+      {+        "number": "3",+        "name": "IN1+",+        "type": "input",+        "description": "Non-inverting input of op-amp A. Common-mode input range extends from ground (V-) up to V+ - 1.5 V, allowing single-supply operation. Same absolute-max limits as IN1-."+      },+      {+        "number": "4",+        "name": "GND",+        "type": "power_in",+        "description": "Negative supply / ground (V-). In single-supply operation tie to 0 V; in split-supply operation tie to the negative rail. Total supply voltage (V+ - V-) must not exceed 40 V."+      },+      {+        "number": "5",+        "name": "IN2+",+        "type": "input",+        "description": "Non-inverting input of op-amp B. Same electrical characteristics as IN1+: rail-to-ground common-mode range up to V+ - 1.5 V and 30 nA typical bias current."+      },+      {+        "number": "6",+        "name": "IN2-",+        "type": "input",+        "description": "Inverting input of op-amp B. Same electrical characteristics as IN1-: ~30 nA bias current, ~3 mV offset, and same absolute-max voltage limits."+      },+      {+        "number": "7",+        "name": "OUT2",+        "type": "output",+        "description": "Output of op-amp B. Same drive capability as OUT1: ~30 mA source / ~8 mA sink at V+=15 V, VO=2 V, with VOL ~5 mV at RL=10 k to ground."+      },+      {+        "number": "8",+        "name": "VCC",+        "type": "power_in",+        "description": "Positive supply (V+). Operating range 2.5 V to 36 V single-supply (up to 40 V absolute max V+ - V-). Bypass with 0.1 uF ceramic to GND close to the pin to reduce noise coupling."+      }+    ],+    "provenance": {+      "rebuilt": "component block rebuilt 2026-10-05 from this page's own README pinout table and .kicad_sym (pins cross-checked), no re-extraction"+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    }   }-}\ No newline at end of file+}