← Commit history

ms3485: restore the component block (pinout + model declarations) from this page's own README and symbol

Ray ·508670b6d4 · ·parent 52f2948
1 file changed +74−1
page.json+74−1
@@ -33,5 +33,78 @@   "author": {     "name": "Ray",     "email": "[email protected]"+  },+  "component": {+    "mpn": "MS3485",+    "manufacturer": "Hangzhou Ruimeng Tech",+    "package": "SOIC-8",+    "pin_count": 8,+    "category": "RS-485 / RS-422 ICs",+    "parts": {+      "symbol": "ms3485.kicad_sym",+      "footprint": "ms3485.kicad_mod",+      "model_3d": "ms3485-etched.glb",+      "model_3d_plain": "ms3485.glb",+      "model_3d_step": "ms3485-etched.step",+      "model_3d_step_plain": "ms3485.step",+      "lbr": "ms3485.lbr"+    },+    "pins": [+      {+        "number": "1",+        "name": "RO",+        "type": "output",+        "description": "Receiver output. Outputs the recovered digital data from the differential A/B bus. Enters high-impedance (tri-state) when RE is high. VOH ≥ VCC-0.4V at 3.3V or ≥0V at 5V with IOUT=-1.5mA; VOL ≤ 0.4V."+      },+      {+        "number": "2",+        "name": "RE",+        "type": "input",+        "description": "Receiver enable (active low, overbar in datasheet). When RE is low, the receiver output RO is active; when RE is high, RO enters the high-impedance state. Logic input, VIH ≥ 2.5V (5V VCC) or ≥2.0V (3.3V VCC); VIL ≤ 0.7V."+      },+      {+        "number": "3",+        "name": "DE",+        "type": "input",+        "description": "Driver enable (active high). When DE is high, the differential driver on A/B is active; when DE is low, the driver outputs are high-impedance. Logic input, VIH ≥ 2.5V (5V VCC) or ≥2.0V (3.3V VCC); VIL ≤ 0.7V."+      },+      {+        "number": "4",+        "name": "DI",+        "type": "input",+        "description": "Driver (transmit) data input. TTL/CMOS-compatible logic input whose level is transmitted as a differential signal on the A/B bus when DE is asserted. VIH ≥ 2.5V (5V VCC); VIL ≤ 0.7V; input current ±2μA max."+      },+      {+        "number": "5",+        "name": "GND",+        "type": "power_in",+        "description": "Ground / 0V reference for the device."+      },+      {+        "number": "6",+        "name": "A",+        "type": "bidirectional",+        "description": "Non-inverting RS-485 differential bus I/O (bus port A). Driver output when DE=1, receiver input when DE=0. Absolute common-mode input range -7V to +12V; ±20kV HBM ESD; typical differential threshold VTH ≈ -0.2 to 0V."+      },+      {+        "number": "7",+        "name": "B",+        "type": "bidirectional",+        "description": "Inverting RS-485 differential bus I/O (bus port B). Driver output when DE=1, receiver input when DE=0. Absolute common-mode input range -7V to +12V; ±20kV HBM ESD."+      },+      {+        "number": "8",+        "name": "VCC",+        "type": "power_in",+        "description": "Positive supply. Recommended operating range +2.5V to +6V (absolute max +7V). Typical supply current ICC ≈ 0.48mA (no load, 5V). Bypass with 0.1μF (104) and 10μF (106) to GND per the typical application circuit."+      }+    ],+    "provenance": {+      "rebuilt": "component block rebuilt 2026-10-05 from this page's own README pinout table and .kicad_sym (pins cross-checked), no re-extraction"+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    }   }-}\ No newline at end of file+}