← Commit history

Initial commit: component/ms1224

Ray ·fac0086452 ·
2 files changed +98
README.mdadded+64
@@ -0,0 +1,64 @@+# MS1224++**Hangzhou Ruimeng Tech** · LVDS ICs · SSOP-28-208mil++MS1224 from Hangzhou Ruimeng Tech, in a SSOP-28-208mil. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | AGND | power_in | Analog ground for the internal PLL and analog blocks. Tie all AGND pins directly to the board ground plane. |+| 2 | RCLK_R/F | input | LVTTL input that selects the RCLK edge used to latch ROUT[0:9] data. Low = falling-edge filtering; High = rising-edge filtering. |+| 3 | REFCLK | input | LVTTL reference clock input for the receive PLL, 10 MHz to 80 MHz. Frequency tolerance ±100 ppm; duty cycle 30% - 70%; edge time ≤6 ns. |+| 4 | AVCC | power_in | Analog 3.3 V supply for the PLL and analog circuitry (3.0 V - 3.6 V, 3.3 V typical). Decouple locally to AGND. |+| 5 | RI+ | input | LVDS differential serial data input, positive side. Differential threshold ±50 mV; common-mode range VID/2 to (2.4 V - VID/2). Pair with RI- across a 100 Ω termination. |+| 6 | RI- | input | LVDS differential serial data input, negative side. Paired with RI+ (pin 5); requires 100 Ω differential termination close to the receiver. |+| 7 | PWRDN | input | Active-low LVTTL power-down input. Driving low (>=16 ns) disables the PLL, forces outputs to high-Z and places the device in a low-power sleep drawing microamps of ICC. Drive high for normal operation. |+| 8 | REN | input | Active-low LVTTL receiver-enable input. Low forces ROUT0-ROUT9 and RCLK into high-impedance while /LOCK remains active to track PLL state. High enables the parallel outputs. |+| 9 | RCLK | output | Recovered LVTTL parallel-data clock output used to latch ROUT0-ROUT9. Runs at the recovered word rate (10 MHz - 80 MHz); output edge selected by RCLK_R/F. |+| 10 | LOCK | output | Active-low LVTTL lock-status output. Goes low when the deserializer PLL is locked to the embedded clock; high indicates loss of lock and the parallel outputs (and RCLK) are invalid/high-Z. |+| 11 | AVCC | power_in | Analog 3.3 V supply for the PLL and analog circuitry (3.0 V - 3.6 V). Bypass close to the pin with AGND return. |+| 12 | AGND | power_in | Analog ground return for the PLL and analog circuitry. |+| 13 | AGND | power_in | Analog ground return for the PLL and analog circuitry. |+| 14 | DGND | power_in | Digital ground return for the LVTTL output drivers and digital core. |+| 15 | ROUT9 | output | Parallel LVTTL data output, bit 9 (MSB of the 10-bit recovered word). VOH >= 2.2 V at IOH = -5 mA; VOL <= 0.5 V at IOL = 5 mA. Valid when /LOCK is low. |+| 16 | ROUT8 | output | Parallel LVTTL data output, bit 8. Latched on the RCLK edge selected by RCLK_R/F. |+| 17 | ROUT7 | output | Parallel LVTTL data output, bit 7. Latched on the RCLK edge selected by RCLK_R/F. |+| 18 | ROUT6 | output | Parallel LVTTL data output, bit 6. Latched on the RCLK edge selected by RCLK_R/F. |+| 19 | ROUT5 | output | Parallel LVTTL data output, bit 5. Latched on the RCLK edge selected by RCLK_R/F. |+| 20 | DGND | power_in | Digital ground return for the LVTTL output drivers. |+| 21 | DVCC | power_in | Digital 3.3 V supply (3.0 V - 3.6 V) for the LVTTL output drivers and digital core. Decouple close to the pin. |+| 22 | DGND | power_in | Digital ground return for the LVTTL output drivers. |+| 23 | DVCC | power_in | Digital 3.3 V supply (3.0 V - 3.6 V) for the LVTTL output drivers and digital core. |+| 24 | ROUT4 | output | Parallel LVTTL data output, bit 4. Latched on the RCLK edge selected by RCLK_R/F. |+| 25 | ROUT3 | output | Parallel LVTTL data output, bit 3. Latched on the RCLK edge selected by RCLK_R/F. |+| 26 | ROUT2 | output | Parallel LVTTL data output, bit 2. Latched on the RCLK edge selected by RCLK_R/F. |+| 27 | ROUT1 | output | Parallel LVTTL data output, bit 1. Latched on the RCLK edge selected by RCLK_R/F. |+| 28 | ROUT0 | output | Parallel LVTTL data output, bit 0 (LSB of the 10-bit recovered word). Latched on the RCLK edge selected by RCLK_R/F. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Hangzhou Ruimeng Tech |+| Package | SSOP-28-208mil |+| Category | Interface |+| Pins | 28 |++## CAD (KiCad official)++- Symbol: `MS1224`+- Footprint: `Package_SO:SSOP-28_5.3x10.2mm_P0.65mm`+- 3D model: SSOP-28-208mil (KiCad packages3D, STEP)++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Hangzhou Ruimeng Tech datasheet](docs/ms1224-datasheet.pdf) (None pp, sha256 `a2a820963051c0eb`, retrieved 2026-08-17, tier: lcsc)+- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.+- **Extractor:** `ds2sf` (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/ms1224-datasheet.pdf)
page.jsonadded+34
@@ -0,0 +1,34 @@+{+  "slug": "ms1224",+  "version": "0.1.0",+  "type": "component",+  "description": "Hangzhou Ruimeng Tech LVDS ICs, SSOP-28-208mil. Datasheet-verified pinout, KiCad symbol/footprint/3D.",+  "tags": [+    "component",+    "interface",+    "ms1224"+  ],+  "dependencies": {},+  "hero": {+    "type": "image",+    "path": "docs/hero.png"+  },+  "files": [+    "page.json",+    "README.md",+    "ms1224.kicad_sym",+    "ms1224.kicad_mod",+    "ms1224.glb",+    "ms1224.step",+    "ms1224.lbr",+    "docs/hero.png",+    "docs/ms1224-datasheet.pdf",+    "viewers/symbol.html",+    "viewers/footprint.html"+  ],+  "visibility": "public",+  "author": {+    "name": "Ray",+    "email": "[email protected]"+  }+}\ No newline at end of file