← Commit history

ms1224: restore the component block (pinout + model declarations) from this page's own README and symbol

Ray ·ddce4f7343 · ·parent 0bf9ca2
1 file changed +194−1
page.json+194−1
@@ -33,5 +33,198 @@   "author": {     "name": "Ray",     "email": "[email protected]"+  },+  "component": {+    "mpn": "MS1224",+    "manufacturer": "Hangzhou Ruimeng Tech",+    "package": "SSOP-28-208mil",+    "pin_count": 28,+    "category": "LVDS ICs",+    "parts": {+      "symbol": "ms1224.kicad_sym",+      "footprint": "ms1224.kicad_mod",+      "model_3d": "ms1224-etched.glb",+      "model_3d_plain": "ms1224.glb",+      "model_3d_step": "ms1224-etched.step",+      "model_3d_step_plain": "ms1224.step",+      "lbr": "ms1224.lbr"+    },+    "pins": [+      {+        "number": "1",+        "name": "AGND",+        "type": "power_in",+        "description": "Analog ground for the internal PLL and analog blocks. Tie all AGND pins directly to the board ground plane."+      },+      {+        "number": "2",+        "name": "RCLK_R/F",+        "type": "input",+        "description": "LVTTL input that selects the RCLK edge used to latch ROUT[0:9] data. Low = falling-edge filtering; High = rising-edge filtering."+      },+      {+        "number": "3",+        "name": "REFCLK",+        "type": "input",+        "description": "LVTTL reference clock input for the receive PLL, 10 MHz to 80 MHz. Frequency tolerance ±100 ppm; duty cycle 30% - 70%; edge time ≤6 ns."+      },+      {+        "number": "4",+        "name": "AVCC",+        "type": "power_in",+        "description": "Analog 3.3 V supply for the PLL and analog circuitry (3.0 V - 3.6 V, 3.3 V typical). Decouple locally to AGND."+      },+      {+        "number": "5",+        "name": "RI+",+        "type": "input",+        "description": "LVDS differential serial data input, positive side. Differential threshold ±50 mV; common-mode range VID/2 to (2.4 V - VID/2). Pair with RI- across a 100 Ω termination."+      },+      {+        "number": "6",+        "name": "RI-",+        "type": "input",+        "description": "LVDS differential serial data input, negative side. Paired with RI+ (pin 5); requires 100 Ω differential termination close to the receiver."+      },+      {+        "number": "7",+        "name": "PWRDN",+        "type": "input",+        "description": "Active-low LVTTL power-down input. Driving low (>=16 ns) disables the PLL, forces outputs to high-Z and places the device in a low-power sleep drawing microamps of ICC. Drive high for normal operation."+      },+      {+        "number": "8",+        "name": "REN",+        "type": "input",+        "description": "Active-low LVTTL receiver-enable input. Low forces ROUT0-ROUT9 and RCLK into high-impedance while /LOCK remains active to track PLL state. High enables the parallel outputs."+      },+      {+        "number": "9",+        "name": "RCLK",+        "type": "output",+        "description": "Recovered LVTTL parallel-data clock output used to latch ROUT0-ROUT9. Runs at the recovered word rate (10 MHz - 80 MHz); output edge selected by RCLK_R/F."+      },+      {+        "number": "10",+        "name": "LOCK",+        "type": "output",+        "description": "Active-low LVTTL lock-status output. Goes low when the deserializer PLL is locked to the embedded clock; high indicates loss of lock and the parallel outputs (and RCLK) are invalid/high-Z."+      },+      {+        "number": "11",+        "name": "AVCC",+        "type": "power_in",+        "description": "Analog 3.3 V supply for the PLL and analog circuitry (3.0 V - 3.6 V). Bypass close to the pin with AGND return."+      },+      {+        "number": "12",+        "name": "AGND",+        "type": "power_in",+        "description": "Analog ground return for the PLL and analog circuitry."+      },+      {+        "number": "13",+        "name": "AGND",+        "type": "power_in",+        "description": "Analog ground return for the PLL and analog circuitry."+      },+      {+        "number": "14",+        "name": "DGND",+        "type": "power_in",+        "description": "Digital ground return for the LVTTL output drivers and digital core."+      },+      {+        "number": "15",+        "name": "ROUT9",+        "type": "output",+        "description": "Parallel LVTTL data output, bit 9 (MSB of the 10-bit recovered word). VOH >= 2.2 V at IOH = -5 mA; VOL <= 0.5 V at IOL = 5 mA. Valid when /LOCK is low."+      },+      {+        "number": "16",+        "name": "ROUT8",+        "type": "output",+        "description": "Parallel LVTTL data output, bit 8. Latched on the RCLK edge selected by RCLK_R/F."+      },+      {+        "number": "17",+        "name": "ROUT7",+        "type": "output",+        "description": "Parallel LVTTL data output, bit 7. Latched on the RCLK edge selected by RCLK_R/F."+      },+      {+        "number": "18",+        "name": "ROUT6",+        "type": "output",+        "description": "Parallel LVTTL data output, bit 6. Latched on the RCLK edge selected by RCLK_R/F."+      },+      {+        "number": "19",+        "name": "ROUT5",+        "type": "output",+        "description": "Parallel LVTTL data output, bit 5. Latched on the RCLK edge selected by RCLK_R/F."+      },+      {+        "number": "20",+        "name": "DGND",+        "type": "power_in",+        "description": "Digital ground return for the LVTTL output drivers."+      },+      {+        "number": "21",+        "name": "DVCC",+        "type": "power_in",+        "description": "Digital 3.3 V supply (3.0 V - 3.6 V) for the LVTTL output drivers and digital core. Decouple close to the pin."+      },+      {+        "number": "22",+        "name": "DGND",+        "type": "power_in",+        "description": "Digital ground return for the LVTTL output drivers."+      },+      {+        "number": "23",+        "name": "DVCC",+        "type": "power_in",+        "description": "Digital 3.3 V supply (3.0 V - 3.6 V) for the LVTTL output drivers and digital core."+      },+      {+        "number": "24",+        "name": "ROUT4",+        "type": "output",+        "description": "Parallel LVTTL data output, bit 4. Latched on the RCLK edge selected by RCLK_R/F."+      },+      {+        "number": "25",+        "name": "ROUT3",+        "type": "output",+        "description": "Parallel LVTTL data output, bit 3. Latched on the RCLK edge selected by RCLK_R/F."+      },+      {+        "number": "26",+        "name": "ROUT2",+        "type": "output",+        "description": "Parallel LVTTL data output, bit 2. Latched on the RCLK edge selected by RCLK_R/F."+      },+      {+        "number": "27",+        "name": "ROUT1",+        "type": "output",+        "description": "Parallel LVTTL data output, bit 1. Latched on the RCLK edge selected by RCLK_R/F."+      },+      {+        "number": "28",+        "name": "ROUT0",+        "type": "output",+        "description": "Parallel LVTTL data output, bit 0 (LSB of the 10-bit recovered word). Latched on the RCLK edge selected by RCLK_R/F."+      }+    ],+    "provenance": {+      "rebuilt": "component block rebuilt 2026-10-05 from this page's own README pinout table and .kicad_sym (pins cross-checked), no re-extraction"+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    }   }-}\ No newline at end of file+}