← Commit history
ms1023: restore the component block (pinout + model declarations) from this page's own README and symbol
1 file changed
+194−1
page.json+194−1@@ -33,5 +33,198 @@ "author": { "name": "Ray", "email": "[email protected]"+ },+ "component": {+ "mpn": "MS1023",+ "manufacturer": "Hangzhou Ruimeng Tech",+ "package": "SSOP-28-208mil",+ "pin_count": 28,+ "category": "LVDS ICs",+ "parts": {+ "symbol": "ms1023.kicad_sym",+ "footprint": "ms1023.kicad_mod",+ "model_3d": "ms1023-etched.glb",+ "model_3d_plain": "ms1023.glb",+ "model_3d_step": "ms1023-etched.step",+ "model_3d_step_plain": "ms1023.step",+ "lbr": "ms1023.lbr"+ },+ "pins": [+ {+ "number": "1",+ "name": "SYNC1",+ "type": "input",+ "description": "LVTTL sync input, ORed with SYNC2. Holding either SYNC input high for >6 TCLK periods triggers transmission of at least 1026 SYNC-pattern symbols on the LVDS output to help the receiver lock."+ },+ {+ "number": "2",+ "name": "SYNC2",+ "type": "input",+ "description": "LVTTL sync input, ORed with SYNC1. Holding either SYNC input high for >6 TCLK periods triggers transmission of at least 1026 SYNC-pattern symbols."+ },+ {+ "number": "3",+ "name": "DIN0",+ "type": "input",+ "description": "Parallel LVTTL data input bit 0. Latched into the serializer on the TCLK edge selected by TCLK_R/F."+ },+ {+ "number": "4",+ "name": "DIN1",+ "type": "input",+ "description": "Parallel LVTTL data input bit 1."+ },+ {+ "number": "5",+ "name": "DIN2",+ "type": "input",+ "description": "Parallel LVTTL data input bit 2."+ },+ {+ "number": "6",+ "name": "DIN3",+ "type": "input",+ "description": "Parallel LVTTL data input bit 3."+ },+ {+ "number": "7",+ "name": "DIN4",+ "type": "input",+ "description": "Parallel LVTTL data input bit 4."+ },+ {+ "number": "8",+ "name": "DIN5",+ "type": "input",+ "description": "Parallel LVTTL data input bit 5."+ },+ {+ "number": "9",+ "name": "DIN6",+ "type": "input",+ "description": "Parallel LVTTL data input bit 6."+ },+ {+ "number": "10",+ "name": "DIN7",+ "type": "input",+ "description": "Parallel LVTTL data input bit 7."+ },+ {+ "number": "11",+ "name": "DIN8",+ "type": "input",+ "description": "Parallel LVTTL data input bit 8."+ },+ {+ "number": "12",+ "name": "DIN9",+ "type": "input",+ "description": "Parallel LVTTL data input bit 9 (MSB)."+ },+ {+ "number": "13",+ "name": "TCLK_R/F",+ "type": "input",+ "description": "LVTTL edge-select input. Low = ignore TCLK falling-edge data (latch on rising edge); High = ignore TCLK rising-edge data (latch on falling edge)."+ },+ {+ "number": "14",+ "name": "TCLK",+ "type": "input",+ "description": "LVTTL reference clock input, 10 MHz to 80 MHz. Latches the parallel input data and provides the PLL reference frequency."+ },+ {+ "number": "15",+ "name": "DGND",+ "type": "power_in",+ "description": "Digital circuit ground."+ },+ {+ "number": "16",+ "name": "DGND",+ "type": "power_in",+ "description": "Digital circuit ground."+ },+ {+ "number": "17",+ "name": "AVCC",+ "type": "power_in",+ "description": "Analog circuit supply for the PLL and analog blocks. Vcc = 3.0 V to 3.6 V (3.3 V typical)."+ },+ {+ "number": "18",+ "name": "AGND",+ "type": "power_in",+ "description": "Analog circuit ground (for PLL and analog blocks)."+ },+ {+ "number": "19",+ "name": "DEN",+ "type": "input",+ "description": "LVTTL LVDS output-enable input. Low forces the LVDS serial output (DO+/DO-) into high impedance; High enables serial data transmission."+ },+ {+ "number": "20",+ "name": "AGND",+ "type": "power_in",+ "description": "Analog circuit ground (for PLL and analog blocks)."+ },+ {+ "number": "21",+ "name": "DO-",+ "type": "output",+ "description": "LVDS differential serial output, negative side.|VOD|typ. 350 mV into RL = 27 Ω; can drive point-to-point or multidrop backplanes."+ },+ {+ "number": "22",+ "name": "DO+",+ "type": "output",+ "description": "LVDS differential serial output, positive side."+ },+ {+ "number": "23",+ "name": "AGND",+ "type": "power_in",+ "description": "Analog circuit ground (for PLL and analog blocks)."+ },+ {+ "number": "24",+ "name": "PWRDN",+ "type": "input",+ "description": "Active-low LVTTL power-down input. Low turns off the PLL, forces the LVDS output to high impedance, and puts the serializer into a µA-level sleep mode. Drive high to resume; a re-initialization (1026 TCLK periods) is required to re-lock."+ },+ {+ "number": "25",+ "name": "AGND",+ "type": "power_in",+ "description": "Analog circuit ground (for PLL and analog blocks)."+ },+ {+ "number": "26",+ "name": "AVCC",+ "type": "power_in",+ "description": "Analog circuit supply for the PLL and analog blocks. Vcc = 3.0 V to 3.6 V."+ },+ {+ "number": "27",+ "name": "DVCC",+ "type": "power_in",+ "description": "Digital circuit supply. Vcc = 3.0 V to 3.6 V (3.3 V typical)."+ },+ {+ "number": "28",+ "name": "DVCC",+ "type": "power_in",+ "description": "Digital circuit supply. Vcc = 3.0 V to 3.6 V."+ }+ ],+ "provenance": {+ "rebuilt": "component block rebuilt 2026-10-05 from this page's own README pinout table and .kicad_sym (pins cross-checked), no re-extraction"+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ } }-}+}