component
MP8009AGV-Z
Public Made by Adomby adom
Monolithic Power Systems Power Over Ethernet (PoE) Controllers, QFN-28(4x5). Pinout extracted from the datasheet, KiCad symbol/footprint/3D.
← Commit history
page.json+248−8@@ -1,13 +1,258 @@ {+ "schema_version": 1,+ "type": "component", "slug": "mp8009agv-z",+ "title": "MP8009AGV-Z",+ "brief": "Monolithic Power Systems Power Over Ethernet (PoE) Controllers, QFN-28(4x5). Datasheet-verified pinout, KiCad symbol/footprint/3D.", "version": "0.1.0",- "type": "component",- "description": "Monolithic Power Systems Power Over Ethernet (PoE) Controllers, QFN-28(4x5). Datasheet-verified pinout, KiCad symbol/footprint/3D.",+ "license": "CC-BY-SA-4.0", "tags": [ "component", "power management (pmic)", "mp8009agv-z" ],+ "component": {+ "mpn": "MP8009AGV-Z",+ "manufacturer": "Monolithic Power Systems",+ "package": "QFN-28(4x5)",+ "pin_count": 29,+ "category": "Power Management (PMIC)",+ "subcategory": "Power Over Ethernet (PoE) Controllers",+ "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8602761745937555456",+ "parts": {+ "symbol": "mp8009agv-z.kicad_sym",+ "footprint": "mp8009agv-z.kicad_mod",+ "model_3d": "mp8009agv-z.glb",+ "model_3d_step": "mp8009agv-z.step",+ "lbr": "mp8009agv-z.lbr"+ },+ "distributor_links": {},+ "pins": [+ {+ "number": "1",+ "name": "NC",+ "type": "unconnected",+ "description": "Not connected. Recommended to connect NC pins to GND."+ },+ {+ "number": "2",+ "name": "AUX",+ "type": "input",+ "description": "Auxiliary power input detection. Pulling AUX 2.3V below VDD turns off the hot-swap MOSFET and disables classification (CLASS), forcing T2P and PG active. Voltage range with respect to VDD: -6.5V to +0.3V."+ },+ {+ "number": "3",+ "name": "DET",+ "type": "passive",+ "description": "PoE detection. Connect a 24.9k\u03a9 resistor between VDD and DET for Power over Ethernet detection signature."+ },+ {+ "number": "4",+ "name": "VDD",+ "type": "power_in",+ "description": "Positive power supply terminal for the PoE input and the controller input power rail. Operating range 0V to 57V; absolute max 100V with respect to GND/VSS."+ },+ {+ "number": "5",+ "name": "NC",+ "type": "unconnected",+ "description": "Not connected. Recommended to connect NC pins to GND."+ },+ {+ "number": "6",+ "name": "NC",+ "type": "unconnected",+ "description": "Not connected. Recommended to connect NC pins to GND."+ },+ {+ "number": "7",+ "name": "NC",+ "type": "unconnected",+ "description": "Not connected. Recommended to connect NC pins to GND."+ },+ {+ "number": "8",+ "name": "MODE",+ "type": "input",+ "description": "Primary-side regulation, secondary-side regulation, and dead time selection. Float MODE for PSR; connect a resistor from MODE to GND for SSR. Also sets dead time between GATE and SYNC."+ },+ {+ "number": "9",+ "name": "COMP",+ "type": "output",+ "description": "Loop compensation. Functions as the error amplifier (EA) output during PSR. Pulled up to 5V internally via a 10k\u03a9 resistor during SSR."+ },+ {+ "number": "10",+ "name": "FB",+ "type": "input",+ "description": "Output voltage feedback and over-voltage protection monitor. Connect a resistor divider from the sense winding to regulate VOUT during PSR; the internal EA is disabled during SSR. FB detects the OVP signal during both PSR and SSR. Voltage range -0.5V to +5.5V."+ },+ {+ "number": "11",+ "name": "GND",+ "type": "power_in",+ "description": "Ground reference for the controller."+ },+ {+ "number": "12",+ "name": "GND",+ "type": "power_in",+ "description": "Ground reference for the controller."+ },+ {+ "number": "13",+ "name": "SYNC",+ "type": "output",+ "description": "Synchronous MOSFET gate driver output. 0.8A drive capability; absolute max -0.3V to +18V with respect to GND."+ },+ {+ "number": "14",+ "name": "NC",+ "type": "unconnected",+ "description": "Not connected. Recommended to connect NC pins to GND."+ },+ {+ "number": "15",+ "name": "GATE",+ "type": "output",+ "description": "Main MOSFET gate driver output. 2A drive capability; absolute max -0.3V to +18V with respect to GND."+ },+ {+ "number": "16",+ "name": "NC",+ "type": "unconnected",+ "description": "Not connected. Recommended to connect NC pins to GND."+ },+ {+ "number": "17",+ "name": "VCC",+ "type": "power_in",+ "description": "DC/DC internal circuit supply. Powered by an internal LDO regulator from VDD; connect a bypass capacitor CVCC between VCC and GND (\u22651\u00b5F for flyback, 4.7\u00b5F for forward). May be powered externally to reduce LDO loss. Absolute max +18V."+ },+ {+ "number": "18",+ "name": "SENSE",+ "type": "input",+ "description": "Primary current sense, PSR output voltage compensation, and frequency dithering setting. Configures VOUT compensation and frequency dithering via resistors (RREG, RSENSE) between SENSE and GND."+ },+ {+ "number": "19",+ "name": "PG",+ "type": "output",+ "description": "PD supply power good indication (open-drain). Enables the DC/DC converter internally; pulled up via an internal current source when the PD output is good. Float PG for most applications. Absolute max +6.5V; sink current 0.5mA."+ },+ {+ "number": "20",+ "name": "RTN",+ "type": "power_out",+ "description": "PD hot-swap MOSFET drain (internal pass MOSFET output to the DC/DC converter return). Tie RTN and GND together and connect the exposed thermal pad to RTN/GND for thermal dissipation. Absolute max -0.3V to +100V with respect to VSS."+ },+ {+ "number": "21",+ "name": "RTN",+ "type": "power_out",+ "description": "PD hot-swap MOSFET drain (internal pass MOSFET output). Tie RTN and GND together and connect the exposed thermal pad to RTN/GND for thermal dissipation."+ },+ {+ "number": "22",+ "name": "NC",+ "type": "unconnected",+ "description": "Not connected. Recommended to connect NC pins to GND."+ },+ {+ "number": "23",+ "name": "VSS",+ "type": "power_in",+ "description": "PoE input power rail negative supply terminal (PoE return)."+ },+ {+ "number": "24",+ "name": "VSS",+ "type": "power_in",+ "description": "PoE input power rail negative supply terminal (PoE return)."+ },+ {+ "number": "25",+ "name": "FTY",+ "type": "passive",+ "description": "Factory use only. Connect FTY to VSS. Absolute max -0.3V to +6.5V with respect to VSS."+ },+ {+ "number": "26",+ "name": "CLASS",+ "type": "passive",+ "description": "PoE classification. Connect a resistor between CLASS and VSS to configure the classification current (ICLASS). Absolute max -0.3V to +6.5V with respect to VSS."+ },+ {+ "number": "27",+ "name": "NC",+ "type": "unconnected",+ "description": "Not connected. Recommended to connect NC pins to GND."+ },+ {+ "number": "28",+ "name": "T2P",+ "type": "output",+ "description": "Type-2 power-sourcing equipment indication (open-drain). Pulled down to VSS to indicate the presence of a wall adapter or Type-2 PSE. Sink current 10mA max."+ },+ {+ "number": "EP",+ "name": "EP",+ "type": "power_in",+ "description": "Exposed thermal pad. Connect to RTN and GND to improve thermal dissipation."+ }+ ],+ "provenance": {+ "extractor": "ds2sf",+ "datasheet": {+ "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8602761745937555456",+ "pages": 41,+ "sha256": "96d79ad4b1a24775",+ "source_tier": "lcsc"+ },+ "cad": "KiCad official (CC-BY-SA 4.0)",+ "pins": {+ "total": 29,+ "described": 29,+ "cites_pages": true,+ "refuses_to_fabricate": true+ }+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ }+ },+ "metadata": {+ "specs": {+ "Manufacturer": "Monolithic Power Systems",+ "Package": "QFN-28(4x5)",+ "Category": "Power Management (PMIC)",+ "Pins": "29"+ }+ },+ "variants": [+ {+ "mpn": "MP8009AGV-ZZ",+ "kind": "packaging"+ }+ ],+ "sections": [+ "hero",+ "viewers",+ "readme",+ "breadcrumbs",+ "info"+ ],+ "discovery_triggers": [+ "mp8009agv-z"+ ],+ "discovery_pitch": "MP8009AGV-Z (Monolithic Power Systems) component page with datasheet-verified CAD.",+ "author": {+ "name": "Ray",+ "email": "[email protected]"+ }, "dependencies": {}, "hero": { "type": "image",@@ -25,10 +270,5 @@ "docs/mp8009agv-z-datasheet.pdf", "viewers/symbol.html", "viewers/footprint.html"- ],- "visibility": "public",- "author": {- "name": "Ray",- "email": "[email protected]"- }+ ] }