← Commit history

Initial commit: component/mp6543hgl-z

Ray ·9498679331 ·
2 files changed +306
README.mdadded+61
@@ -0,0 +1,61 @@+# MP6543HGL-Z++**Monolithic Power Systems** · Brushless DC (BLDC) Motor Driver · QFN-24(3x4)++MP6543HGL-Z from Monolithic Power Systems, in a QFN-24(3x4). Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | ENA | input | Enable input for phase A; logical high enables output, low produces high impedance. |+| 2 | ENB | input | Enable input for phase B; logical high enables output, low produces high impedance. |+| 3 | ENC | input | Enable input for phase C; logical high enables output, low produces high impedance. |+| 4 | PWMA | input | PWM input for phase A; controls half-bridge output when enabled (high = VIN, low = GND). |+| 5 | PWMB | input | PWM input for phase B; controls half-bridge output when enabled (high = VIN, low = GND). |+| 6 | PWMC | input | PWM input for phase C; controls half-bridge output when enabled (high = VIN, low = GND). |+| 7 | VIN | power_in | Input power supply; operating voltage range 3V to 22V. |+| 8 | LSS | power_in | Low-side source connection for all three phases; must be connected directly to ground. |+| 9 | SA | output | Phase A half-bridge output; switches between VIN and GND based on control logic. |+| 10 | SB | output | Phase B half-bridge output; switches between VIN and GND based on control logic. |+| 11 | SC | output | Phase C half-bridge output; switches between VIN and GND based on control logic. |+| 12 | LSS | power_in | Low-side source connection for all three phases; must be connected directly to ground. |+| 13 | VIN | power_in | Input power supply; operating voltage range 3V to 22V. |+| 14 | VCP | power_out | Charge pump output; provides VIN + 3.3V for high-side gate drivers. |+| 15 | GND | power_in | Ground reference. |+| 16 | VIN_LDO | power_in | LDO regulator input; operating voltage range 3V to 22V. |+| 17 | OC_ADJ | input | Over-current threshold configuration pin; floating sets 5.5A threshold, 0Ω to ground sets 4.7A threshold. |+| 18 | V3P3 | power_out | 3.3V regulated output with 100mA capacity. |+| 19 | N/C | unconnected | No internal connection. |+| 20 | nFAULT | tri_state | Open-drain fault output; pulls low if over-current protection or thermal shutdown occurs. |+| 21 | SOC | output | Current-sense output for phase C; sources/sinks current proportional to LS-FET current (1/4000 ratio). |+| 22 | SOB | output | Current-sense output for phase B; sources/sinks current proportional to LS-FET current (1/4000 ratio). |+| 23 | SOA | output | Current-sense output for phase A; sources/sinks current proportional to LS-FET current (1/4000 ratio). |+| 24 | nSLEEP | input | Sleep mode control input; pull low to enter low-power sleep mode with internal circuits disabled. |+| 25 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Monolithic Power Systems |+| Package | QFN-24(3x4) |+| Category | Motor Driver ICs |+| Pins | 25 |++## CAD (KiCad official)++- Symbol: `MP6543HGL-Z`+- Footprint: `Package_DFN_QFN:QFN-24-1EP_3x4mm_P0.4mm_EP1.65x2.65mm`+- 3D model: QFN-24(3x4) (KiCad packages3D, STEP)+- 3D model files: `mp6543hgl-z-etched.step` / `mp6543hgl-z-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `mp6543hgl-z.step` / `mp6543hgl-z.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Monolithic Power Systems datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8589839172836876288) (20 pp, sha256 `b6ffb8e2d5e5d552`, retrieved 2026-09-22, tier: lcsc)+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.2`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-4-6` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/mp6543hgl-z-datasheet.pdf)
page.jsonadded+245
@@ -0,0 +1,245 @@+{+  "slug": "mp6543hgl-z",+  "version": "0.1.0",+  "type": "component",+  "description": "Monolithic Power Systems Brushless DC (BLDC) Motor Driver, QFN-24(3x4). Datasheet-verified pinout, KiCad symbol/footprint/3D.",+  "tags": [+    "component",+    "motor driver ics",+    "mp6543hgl-z",+    "factory-2.0.0",+    "extractor-text"+  ],+  "dependencies": {},+  "hero": {+    "type": "image",+    "path": "docs/hero.png"+  },+  "files": [+    "page.json",+    "README.md",+    "mp6543hgl-z.kicad_sym",+    "mp6543hgl-z.kicad_mod",+    "mp6543hgl-z.glb",+    "mp6543hgl-z.step",+    "mp6543hgl-z.lbr",+    "docs/hero.png",+    "docs/mp6543hgl-z-datasheet.pdf",+    "viewers/symbol.html",+    "viewers/footprint.html"+  ],+  "component": {+    "mpn": "MP6543HGL-Z",+    "manufacturer": "Monolithic Power Systems",+    "package": "QFN-24(3x4)",+    "pin_count": 25,+    "category": "Motor Driver ICs",+    "subcategory": "Brushless DC (BLDC) Motor Driver",+    "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8589839172836876288",+    "parts": {+      "symbol": "mp6543hgl-z.kicad_sym",+      "footprint": "mp6543hgl-z.kicad_mod",+      "model_3d": "mp6543hgl-z-etched.glb",+      "model_3d_plain": "mp6543hgl-z.glb",+      "model_3d_step": "mp6543hgl-z-etched.step",+      "model_3d_step_plain": "mp6543hgl-z.step",+      "lbr": "mp6543hgl-z.lbr"+    },+    "distributor_links": {+      "lcsc": "C3681371"+    },+    "pins": [+      {+        "number": "1",+        "name": "ENA",+        "type": "input",+        "description": "Enable input for phase A; logical high enables output, low produces high impedance."+      },+      {+        "number": "2",+        "name": "ENB",+        "type": "input",+        "description": "Enable input for phase B; logical high enables output, low produces high impedance."+      },+      {+        "number": "3",+        "name": "ENC",+        "type": "input",+        "description": "Enable input for phase C; logical high enables output, low produces high impedance."+      },+      {+        "number": "4",+        "name": "PWMA",+        "type": "input",+        "description": "PWM input for phase A; controls half-bridge output when enabled (high = VIN, low = GND)."+      },+      {+        "number": "5",+        "name": "PWMB",+        "type": "input",+        "description": "PWM input for phase B; controls half-bridge output when enabled (high = VIN, low = GND)."+      },+      {+        "number": "6",+        "name": "PWMC",+        "type": "input",+        "description": "PWM input for phase C; controls half-bridge output when enabled (high = VIN, low = GND)."+      },+      {+        "number": "7",+        "name": "VIN",+        "type": "power_in",+        "description": "Input power supply; operating voltage range 3V to 22V."+      },+      {+        "number": "8",+        "name": "LSS",+        "type": "power_in",+        "description": "Low-side source connection for all three phases; must be connected directly to ground."+      },+      {+        "number": "9",+        "name": "SA",+        "type": "output",+        "description": "Phase A half-bridge output; switches between VIN and GND based on control logic."+      },+      {+        "number": "10",+        "name": "SB",+        "type": "output",+        "description": "Phase B half-bridge output; switches between VIN and GND based on control logic."+      },+      {+        "number": "11",+        "name": "SC",+        "type": "output",+        "description": "Phase C half-bridge output; switches between VIN and GND based on control logic."+      },+      {+        "number": "12",+        "name": "LSS",+        "type": "power_in",+        "description": "Low-side source connection for all three phases; must be connected directly to ground."+      },+      {+        "number": "13",+        "name": "VIN",+        "type": "power_in",+        "description": "Input power supply; operating voltage range 3V to 22V."+      },+      {+        "number": "14",+        "name": "VCP",+        "type": "power_out",+        "description": "Charge pump output; provides VIN + 3.3V for high-side gate drivers."+      },+      {+        "number": "15",+        "name": "GND",+        "type": "power_in",+        "description": "Ground reference."+      },+      {+        "number": "16",+        "name": "VIN_LDO",+        "type": "power_in",+        "description": "LDO regulator input; operating voltage range 3V to 22V."+      },+      {+        "number": "17",+        "name": "OC_ADJ",+        "type": "input",+        "description": "Over-current threshold configuration pin; floating sets 5.5A threshold, 0Ω to ground sets 4.7A threshold."+      },+      {+        "number": "18",+        "name": "V3P3",+        "type": "power_out",+        "description": "3.3V regulated output with 100mA capacity."+      },+      {+        "number": "19",+        "name": "N/C",+        "type": "unconnected",+        "description": "No internal connection."+      },+      {+        "number": "20",+        "name": "nFAULT",+        "type": "tri_state",+        "description": "Open-drain fault output; pulls low if over-current protection or thermal shutdown occurs."+      },+      {+        "number": "21",+        "name": "SOC",+        "type": "output",+        "description": "Current-sense output for phase C; sources/sinks current proportional to LS-FET current (1/4000 ratio)."+      },+      {+        "number": "22",+        "name": "SOB",+        "type": "output",+        "description": "Current-sense output for phase B; sources/sinks current proportional to LS-FET current (1/4000 ratio)."+      },+      {+        "number": "23",+        "name": "SOA",+        "type": "output",+        "description": "Current-sense output for phase A; sources/sinks current proportional to LS-FET current (1/4000 ratio)."+      },+      {+        "number": "24",+        "name": "nSLEEP",+        "type": "input",+        "description": "Sleep mode control input; pull low to enter low-power sleep mode with internal circuits disabled."+      },+      {+        "number": "25",+        "name": "EP",+        "type": "passive",+        "description": "Exposed pad (from the footprint; not named in the datasheet pin table)."+      }+    ],+    "provenance": {+      "extractor": "extract_pins 0.2",+      "factory_chain": {+        "factory": "2.0.0",+        "extractor": "extract_pins 0.2",+        "primary_model": "claude-haiku-4-5-20251001",+        "primary_mode": "text",+        "consensus_model": "claude-sonnet-4-6",+        "consensus": "agreed",+        "guards": "pin_guards 0.1: passed",+        "guard_notes": [+          "exposed pad 25 added from the footprint"+        ],+        "pages_sent": 20,+        "cost_usd": 0.2737,+        "at": "2026-09-22T08:17:46"+      },+      "datasheet": {+        "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8589839172836876288",+        "pages": 20,+        "sha256": "b6ffb8e2d5e5d552",+        "source_tier": "lcsc"+      },+      "cad": "KiCad official (CC-BY-SA 4.0)",+      "pins": {+        "total": 25,+        "described": 25,+        "cites_pages": true,+        "refuses_to_fabricate": true+      }+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    }+  },+  "visibility": "public",+  "org": "adom",+  "author": {+    "name": "Ray",+    "email": "[email protected]"+  }+}\ No newline at end of file