← Commit history

mp3418gj-z: factory component page (tier=lcsc)

Ray ·7c2f14a184 · ·parent a2fec60
1 file changed +122−8
page.json+122−8
@@ -1,13 +1,132 @@ {+  "schema_version": 1,+  "type": "component",   "slug": "mp3418gj-z",+  "title": "MP3418GJ-Z",+  "brief": "Monolithic Power Systems DC-DC Converters, TSOT-23-8. Datasheet-verified pinout, KiCad symbol/footprint/3D.",   "version": "0.1.0",-  "type": "component",-  "description": "Monolithic Power Systems DC-DC Converters, TSOT-23-8. Datasheet-verified pinout, KiCad symbol/footprint/3D.",+  "license": "CC-BY-SA-4.0",   "tags": [     "component",     "power management (pmic)",     "mp3418gj-z"   ],+  "component": {+    "mpn": "MP3418GJ-Z",+    "manufacturer": "Monolithic Power Systems",+    "package": "TSOT-23-8",+    "pin_count": 8,+    "category": "Power Management (PMIC)",+    "subcategory": "DC-DC Converters",+    "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8602677467794853888",+    "parts": {+      "symbol": "mp3418gj-z.kicad_sym",+      "footprint": "mp3418gj-z.kicad_mod",+      "model_3d": "mp3418gj-z.glb",+      "model_3d_step": "mp3418gj-z.step",+      "lbr": "mp3418gj-z.lbr"+    },+    "distributor_links": {},+    "pins": [+      {+        "number": "1",+        "name": "IN",+        "type": "power_in",+        "description": "Input supply pin, 0.6V to 4V operating range (0.8V minimum startup). Requires a low-ESR bypass capacitor (>4.7\u00b5F ceramic in parallel with 100nF) placed close to the pin. Absolute maximum is -0.5V to +6V."+      },+      {+        "number": "2",+        "name": "OUT",+        "type": "power_out",+        "description": "Regulated output node and source of the internal P-channel synchronous rectifier; adjustable 1.8V to 4V. Place the output capacitor (\u226510\u00b5F, X5R/X7R) as close as possible between OUT and PGND. Absolute maximum -0.5V to +6.5V. The IC self-powers from OUT when VOUT > VIN + 200mV."+      },+      {+        "number": "3",+        "name": "SW",+        "type": "passive",+        "description": "Output switching node between the internal NMOS low-side and PMOS high-side FETs. Connect the boost inductor (4.7\u00b5H-10\u00b5H, typ. 6.8\u00b5H) between VIN and SW. Absolute maximum -0.5V to +6.5V; NMOS RDS(on) \u2248 110m\u03a9, PMOS RDS(on) \u2248 120m\u03a9, current limit \u2248 400mA."+      },+      {+        "number": "4",+        "name": "PGND",+        "type": "power_in",+        "description": "Power ground; reference ground for the regulated output voltage and return for the switching power stage. Tie to a solid ground plane along with AGND close to the IC."+      },+      {+        "number": "5",+        "name": "NC",+        "type": "unconnected",+        "description": "No connection. Leave floating or tie to ground; no internal function is documented."+      },+      {+        "number": "6",+        "name": "AGND",+        "type": "power_in",+        "description": "Analog ground / control ground reference. Route the feedback divider return to this pin, and tie AGND to PGND at a single point close to the IC."+      },+      {+        "number": "7",+        "name": "FB",+        "type": "input",+        "description": "Feedback input to the internal error amplifier; regulates to VFB = 1.21V (nominal). Connect to the tap of an external resistor divider from VOUT to AGND: VOUT = 1.21V \u00d7 (1 + R1/R2). Feedback bias current is typically 1nA; use R1 \u2265 300k\u03a9 for low quiescent and good stability."+      },+      {+        "number": "8",+        "name": "EN",+        "type": "input",+        "description": "Enable input. Drive above VEN_H = 0.7V to turn the regulator on; below VEN_L = 0.1V to shut it down (ISD \u2248 0.1\u00b5A). Do not exceed 6.5V absolute maximum. Input current \u2248 1.2\u00b5A when tied to VIN. Do not leave floating."+      }+    ],+    "provenance": {+      "extractor": "ds2sf",+      "datasheet": {+        "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8602677467794853888",+        "pages": null,+        "sha256": "9e4de9b7662e24c4",+        "source_tier": "lcsc"+      },+      "cad": "KiCad official (CC-BY-SA 4.0)",+      "pins": {+        "total": 8,+        "described": 8,+        "cites_pages": true,+        "refuses_to_fabricate": true+      }+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    }+  },+  "metadata": {+    "specs": {+      "Manufacturer": "Monolithic Power Systems",+      "Package": "TSOT-23-8",+      "Category": "Power Management (PMIC)",+      "Pins": "8"+    }+  },+  "variants": [+    {+      "mpn": "MP3418GJ-Z",+      "kind": "packaging"+    }+  ],+  "sections": [+    "hero",+    "viewers",+    "readme",+    "breadcrumbs",+    "info"+  ],+  "discovery_triggers": [+    "mp3418gj-z"+  ],+  "discovery_pitch": "MP3418GJ-Z (Monolithic Power Systems) component page with datasheet-verified CAD.",+  "author": {+    "name": "Ray",+    "email": "[email protected]"+  },   "dependencies": {},   "hero": {     "type": "image",@@ -25,10 +144,5 @@     "docs/mp3418gj-z-datasheet.pdf",     "viewers/symbol.html",     "viewers/footprint.html"-  ],-  "visibility": "public",-  "author": {-    "name": "Ray",-    "email": "[email protected]"-  }+  ] }\ No newline at end of file