← Commit history

Set visibility: public

Ray ·34f52bb111 · ·parent 69c3616
1 file changed +9−6
page.json+9−6
@@ -32,19 +32,19 @@         "number": "1",         "name": "IN",         "type": "power_in",-        "description": "Input supply pin, 0.6V to 4V operating range (0.8V minimum startup). Requires a low-ESR bypass capacitor (>4.7\u00b5F ceramic in parallel with 100nF) placed close to the pin. Absolute maximum is -0.5V to +6V."+        "description": "Input supply pin, 0.6V to 4V operating range (0.8V minimum startup). Requires a low-ESR bypass capacitor (>4.7µF ceramic in parallel with 100nF) placed close to the pin. Absolute maximum is -0.5V to +6V."       },       {         "number": "2",         "name": "OUT",         "type": "power_out",-        "description": "Regulated output node and source of the internal P-channel synchronous rectifier; adjustable 1.8V to 4V. Place the output capacitor (\u226510\u00b5F, X5R/X7R) as close as possible between OUT and PGND. Absolute maximum -0.5V to +6.5V. The IC self-powers from OUT when VOUT > VIN + 200mV."+        "description": "Regulated output node and source of the internal P-channel synchronous rectifier; adjustable 1.8V to 4V. Place the output capacitor (≥10µF, X5R/X7R) as close as possible between OUT and PGND. Absolute maximum -0.5V to +6.5V. The IC self-powers from OUT when VOUT > VIN + 200mV."       },       {         "number": "3",         "name": "SW",         "type": "passive",-        "description": "Output switching node between the internal NMOS low-side and PMOS high-side FETs. Connect the boost inductor (4.7\u00b5H-10\u00b5H, typ. 6.8\u00b5H) between VIN and SW. Absolute maximum -0.5V to +6.5V; NMOS RDS(on) \u2248 110m\u03a9, PMOS RDS(on) \u2248 120m\u03a9, current limit \u2248 400mA."+        "description": "Output switching node between the internal NMOS low-side and PMOS high-side FETs. Connect the boost inductor (4.7µH-10µH, typ. 6.8µH) between VIN and SW. Absolute maximum -0.5V to +6.5V; NMOS RDS(on) ≈ 110mΩ, PMOS RDS(on) ≈ 120mΩ, current limit ≈ 400mA."       },       {         "number": "4",@@ -68,13 +68,13 @@         "number": "7",         "name": "FB",         "type": "input",-        "description": "Feedback input to the internal error amplifier; regulates to VFB = 1.21V (nominal). Connect to the tap of an external resistor divider from VOUT to AGND: VOUT = 1.21V \u00d7 (1 + R1/R2). Feedback bias current is typically 1nA; use R1 \u2265 300k\u03a9 for low quiescent and good stability."+        "description": "Feedback input to the internal error amplifier; regulates to VFB = 1.21V (nominal). Connect to the tap of an external resistor divider from VOUT to AGND: VOUT = 1.21V × (1 + R1/R2). Feedback bias current is typically 1nA; use R1 ≥ 300kΩ for low quiescent and good stability."       },       {         "number": "8",         "name": "EN",         "type": "input",-        "description": "Enable input. Drive above VEN_H = 0.7V to turn the regulator on; below VEN_L = 0.1V to shut it down (ISD \u2248 0.1\u00b5A). Do not exceed 6.5V absolute maximum. Input current \u2248 1.2\u00b5A when tied to VIN. Do not leave floating."+        "description": "Enable input. Drive above VEN_H = 0.7V to turn the regulator on; below VEN_L = 0.1V to shut it down (ISD ≈ 0.1µA). Do not exceed 6.5V absolute maximum. Input current ≈ 1.2µA when tied to VIN. Do not leave floating."       }     ],     "provenance": {@@ -144,5 +144,8 @@     "docs/mp3418gj-z-datasheet.pdf",     "viewers/symbol.html",     "viewers/footprint.html"-  ]+  ],+  "visibility": {+    "public": true+  } }\ No newline at end of file