mlx90365lgo-abd-000-re

@@ -33,5 +33,126 @@   "author": {     "name": "Ray",     "email": "[email protected]"+  },+  "component": {+    "mpn": "MLX90365LGO-ABD-000-RE",+    "manufacturer": "Melexis",+    "package": "TSSOP-16",+    "pin_count": 16,+    "category": "Position Sensor",+    "parts": {+      "symbol": "mlx90365lgo-abd-000-re.kicad_sym",+      "footprint": "mlx90365lgo-abd-000-re.kicad_mod",+      "model_3d": "mlx90365lgo-abd-000-re-etched.glb",+      "model_3d_plain": "mlx90365lgo-abd-000-re.glb",+      "model_3d_step": "mlx90365lgo-abd-000-re-etched.step",+      "model_3d_step_plain": "mlx90365lgo-abd-000-re.step",+      "lbr": "mlx90365lgo-abd-000-re.lbr"+    },+    "pins": [+      {+        "number": "1",+        "name": "VDIG1",+        "type": "passive",+        "description": "Internal 2.5 V digital regulator decoupling pin for die 1. Connect a decoupling capacitor to VSS1; do not drive externally."+      },+      {+        "number": "2",+        "name": "VSS1",+        "type": "power_in",+        "description": "Ground reference for die 1 (Ground1). 0 V return for the die-1 supply and output."+      },+      {+        "number": "3",+        "name": "VDD1",+        "type": "power_in",+        "description": "Positive supply for die 1: 4.5-5.5 V nominal, up to +24 V overvoltage tolerance. Reverse-protected to -12 V (breakdown at -14 V). Recommended decoupling per section 16."+      },+      {+        "number": "4",+        "name": "TEST0_1",+        "type": "input",+        "description": "Factory test pin 0 for die 1. Not for customer use; tie to VSS1 (ground) for best EMC per section 16."+      },+      {+        "number": "5",+        "name": "TEST2_2",+        "type": "input",+        "description": "Factory test pin 2 for die 2. Not for customer use; tie to VSS2 (ground) for best EMC per section 16."+      },+      {+        "number": "6",+        "name": "OUT2",+        "type": "output",+        "description": "Position sensor output for die 2. Programmable as 12-bit ratiometric analog (RL ≥ 4.7 kΩ) or 12-bit PWM open-drain (RL_PWM ≥ 1 kΩ). Short-circuit current 15 mA at 0/5 V."+      },+      {+        "number": "7",+        "name": "NC_2",+        "type": "unconnected",+        "description": "Not Used pin associated with die 2. Recommended to tie to VSS2 (ground) for optimal EMC per section 16."+      },+      {+        "number": "8",+        "name": "TEST1_2",+        "type": "input",+        "description": "Factory test pin 1 for die 2. Not for customer use; tie to VSS2 (ground) for best EMC per section 16."+      },+      {+        "number": "9",+        "name": "VDIG2",+        "type": "passive",+        "description": "Internal 2.5 V digital regulator decoupling pin for die 2. Connect a decoupling capacitor to VSS2; do not drive externally."+      },+      {+        "number": "10",+        "name": "VSS2",+        "type": "power_in",+        "description": "Ground reference for die 2 (Ground2). 0 V return for the die-2 supply and output."+      },+      {+        "number": "11",+        "name": "VDD2",+        "type": "power_in",+        "description": "Positive supply for die 2: 4.5-5.5 V nominal, up to +24 V overvoltage tolerance. Reverse-protected to -12 V (breakdown at -14 V). Recommended decoupling per section 16."+      },+      {+        "number": "12",+        "name": "TEST0_2",+        "type": "input",+        "description": "Factory test pin 0 for die 2. Not for customer use; tie to VSS2 (ground) for best EMC per section 16."+      },+      {+        "number": "13",+        "name": "TEST2_1",+        "type": "input",+        "description": "Factory test pin 2 for die 1. Not for customer use; tie to VSS1 (ground) for best EMC per section 16."+      },+      {+        "number": "14",+        "name": "NC_1",+        "type": "unconnected",+        "description": "Not Used pin associated with die 1. Recommended to tie to VSS1 (ground) for optimal EMC per section 16."+      },+      {+        "number": "15",+        "name": "OUT1",+        "type": "output",+        "description": "Position sensor output for die 1. Programmable as 12-bit ratiometric analog (RL ≥ 4.7 kΩ) or 12-bit PWM open-drain (RL_PWM ≥ 1 kΩ). Short-circuit current 15 mA at 0/5 V."+      },+      {+        "number": "16",+        "name": "TEST1_1",+        "type": "input",+        "description": "Factory test pin 1 for die 1. Not for customer use; tie to VSS1 (ground) for best EMC per section 16."+      }+    ],+    "provenance": {+      "rebuilt": "component block rebuilt 2026-10-05 from this page's own README pinout table and .kicad_sym (pins cross-checked), no re-extraction"+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    }   }-}\ No newline at end of file+}