component
MIC94163YCS-TR
Public Made by Adomby adom
Microchip Tech Power Management Specialized - PMIC, WLCSP-6(1x1.5). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
← Commit history
Publish 0.1.0
15 files changed
+2207
README.md+75docs/hero.pngdocs/mic94163ycs-tr-datasheet.pdfmic94163ycs-tr-etched.glbmic94163ycs-tr-hero.glbmic94163ycs-tr-hero.overlay.json+216mic94163ycs-tr.glbmic94163ycs-tr.kicad_mod+271mic94163ycs-tr.kicad_sym+37mic94163ycs-tr.lbr+121mic94163ycs-tr.step+1113package.json+183page.json+189viewers/footprint.html+1viewers/symbol.html+1README.mdadded+75@@ -0,0 +1,75 @@+# MIC94163YCS-TR++**Microchip Tech** · Power Management Specialized - PMIC · WLCSP-6(1x1.5)++MIC94163YCS-TR from Microchip Tech, in a WLCSP-6(1x1.5). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| A1 | VOUT | power_out | Source of the N-channel MOSFET, the switched output; tied internally with B1. |+| B1 | VOUT | power_out | Source of the N-channel MOSFET, the switched output; tied internally with A1. |+| C1 | GND | power_in | Ground. |+| A2 | VIN | power_in | Input supply (drain of the N-channel MOSFET), operating range 1.7V to 5.5V; tied internally with B2. |+| B2 | VIN | power_in | Input supply (drain of the N-channel MOSFET), operating range 1.7V to 5.5V; tied internally with A2. |+| C2 | EN | input | Active-high enable input with internal 2 MΩ pull-down resistor; output is off if left floating, and the MIC94163 turns on above 1.2V (enable up to 5.5V, not limited by VIN). |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Microchip Tech |+| Package | WLCSP-6(1x1.5) |+| Category | Power Supply Chip |+| Pins | 6 |++## Electrical characteristics++Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).++| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |+|---|---|---|---|---|---|---|---|+| Operating Input Voltage Range | VIN | 1.7 | | 5.5 | V | | 3 |+| Enable Threshold Voltage (MIC94162/3/4/5) Logic Low, OFF | VENTH | | | 0.375 | V | Logic Low, OFF; VIN = 1.8V to 5.5V; IOUT = 250 μA; -40˚C ≥ TJ ≤ +85˚C | 3 |+| Enable Threshold Voltage (MIC94162/3/4/5) Logic High, ON | VENTH | 1.2 | | | V | Logic High, ON; VIN = 1.7V to 5.5V; IOUT = 250 μA; -40˚C ≥ TJ ≤ +85˚C | 3 |+| Enable Input Current | IEN | | 2 | 4 | µA | VIN = VEN = 3.6V; IOUT = 0 | 3 |+| Quiescent Current (MIC94162/3) | IQ | | 25 | 55 | µA | VIN = VEN = 3.6V; IOUT = 0 | 3 |+| Shutdown Current | ISD | | 0.1 | 1 | µA | VIN = 5.5V; VEN = 0V; IOUT = Open | 3 |+| OFF State Leakage Current | ILEAK | | 0.1 | 1 | µA | VIN = 5.5V; VEN = 0V; IOUT = Short | 3 |+| Reverse Leakage Current (MIC94161/3/5) | ILEAKR | | 0.1 | 1 | µA | VIN = 0V; VOUT = 5.5V; VEN = 0V | 3 |+| Junction Temperature Range | TJ | -40 | | 125 | °C | Note 1 | 4 |+| Storage Temperature Range | TS | -55 | | 150 | °C | | 4 |+| Input Voltage (absolute maximum) | VIN | -0.3 | | 6 | V | | 3 |+| Enable Voltage (absolute maximum) | VEN | -0.3 | | 6 | V | | 3 |+| Continuous Drain Current | ID | -3 | | 3 | A | With thermal contact to PCB | 3 |+| ESD Rating | | | | 2 | kV | Human body model, 1.5 kΩ in series with 100 pF | 3 |+| Input Voltage (operating ratings) | VIN | 1.7 | | 5.5 | V | | 3 |+| Turn-Off Fall Time | tF | 500 | | | µs | VIN = 3.6V; RLOAD = 1.2Ω; COUT = 200 μF; VEN = 1.5V | 4 |+| N-Channel ON-Resistance | RDS(ON) | | 14.5 | | mΩ | VIN = 5.5V; VEN = 1.5V; IOUT = 3A | 4 |+| N-Channel ON-Resistance | RDS(ON) | | 15.5 | | mΩ | VIN = 4.5V; VEN = 1.5V; IOUT = 3A | 4 |+| N-Channel ON-Resistance | RDS(ON) | | 17.5 | | mΩ | VIN = 3.6V; VEN = 1.5V; IOUT = 3A | 4 |+| N-Channel ON-Resistance | RDS(ON) | | 21 | | mΩ | VIN = 2.7V; VEN = 1.5V; IOUT = 3A | 4 |+| N-Channel ON-Resistance | RDS(ON) | | 34 | | mΩ | VIN = 1.8V; VEN = 1.5V; IOUT = 3A | 4 |+| N-Channel ON-Resistance | RDS(ON) | | 40 | | mΩ | VIN = 1.7V; VEN = 1.5V; IOUT = 3A | 4 |+| Turn-On Delay Time (MIC94162/3) | tON | | 10 | | µs | VIN = 3.6V; RLOAD = 1.2Ω; COUT = 200 μF; VEN = 1.5V | 4 |+| Turn-On Rise Time (MIC94162/3) | tR | | 60 | | µs | VIN = 3.6V; RLOAD = 1.2Ω; COUT = 200 μF; VEN = 1.5V | 4 |+| Turn-Off Delay Time | tOFF | | 25 | | µs | VIN = 3.6V; RLOAD = 1.2Ω; COUT = 200 μF; VEN = 1.5V | 4 |+| Thermal Resistance, WLCSP 6-Ball | θJA | | 108 | | °C/W | | 4 |++## CAD (KiCad official)++- Symbol: `MIC94163YCS-TR`+- Footprint: `Package_CSP:WLCSP-6_1.4x1.0mm_P0.4mm`+- 3D model: WLCSP-6(1x1.5), generated from the KiCad footprint (body from the F.Fab outline, terminals on the pads, 0.35 mm nominal DSBGA height). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions are nominal, not the manufacturer's CAD (STEP)+- 3D model files: `mic94163ycs-tr-etched.step` / `mic94163ycs-tr-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `mic94163ycs-tr.step` / `mic94163ycs-tr.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Microchip Tech datasheet](docs/mic94163ycs-tr-datasheet.pdf) (20 pp, sha256 `e4a0ce4adecf1ea3`, retrieved 2026-10-23, tier: manufacturer)+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-sonnet-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/mic94163ycs-tr-datasheet.pdf)
docs/hero.pngadded⋯ 1 unchanged line ⋯
docs/mic94163ycs-tr-datasheet.pdfadded⋯ 1 unchanged line ⋯
mic94163ycs-tr-etched.glbadded⋯ 1 unchanged line ⋯
mic94163ycs-tr-hero.glbadded⋯ 1 unchanged line ⋯
mic94163ycs-tr-hero.overlay.jsonadded+216@@ -0,0 +1,216 @@+{+ "spec": "adom-hero 1.4",+ "mpn": "MIC94163YCS-TR",+ "kind": "component + footprint reference art",+ "board_use": false,+ "plane_z_mm": -0.02,+ "units": "metre",+ "upAxis": "Z",+ "layers": {+ "pad_outlines": {+ "material": "Footprint pads - teal dashed outlines - 50 percent opacity",+ "rgba": [+ 0.0,+ 0.902,+ 0.863,+ 0.5+ ],+ "pads": 6,+ "span_mm": 1.05,+ "dash_mm": 0.12,+ "gap_mm": 0.072,+ "pad_stroke_mm": 0.03+ },+ "silkscreen": {+ "material": "Silkscreen reference lines - 30 percent opacity",+ "rgba": [+ 0.92,+ 0.96,+ 1.0,+ 0.3+ ],+ "footprint_items": 5,+ "pin1": {+ "source": "footprint silkscreen",+ "pad": "A1"+ }+ },+ "signal_names": {+ "material": "Signal names - 50 percent opacity",+ "rgba": [+ 0.92,+ 0.96,+ 1.0,+ 0.5+ ],+ "font": "DejaVu Sans Mono",+ "labels": 6,+ "sides": "top + mirrored underside (single-sided)",+ "fallback_to_pad_number": 0+ }+ },+ "align": {+ "ok": true,+ "centre_offset_mm": 0.0,+ "tolerance_mm": 0.25,+ "orientation_flipped": false,+ "contacts_bbox_mm": [+ -0.517,+ 0.517,+ -0.319,+ 0.319+ ],+ "pads_bbox_mm": [+ -0.525,+ 0.525,+ -0.325,+ 0.325+ ],+ "seating_z_mm": -0.034+ },+ "sources": {+ "glb": "mic94163ycs-tr-etched.glb",+ "glb_sha256": "fe47674a3acd8f6fab9637af87f04d6a73778bb51e932189c6b62950a2eaa088",+ "footprint": "mic94163ycs-tr.kicad_mod",+ "footprint_sha256": "2034a9c86c119afd16b25f540dcdcfe0cc71acdf2cdaa55f4547a74e3a73fd3c",+ "pins": "page.json component.pins",+ "pins_sha256": "6553b907a03fbb2d38e83f58f61d144bbbb3b60084ae3e6f5e5b70865ed16b61"+ },+ "generator": "adom-wiki 1.7.80 (component_hero)",+ "labels": [+ {+ "pad": "A1",+ "text": "VOUT",+ "x": -0.625,+ "y": -0.2,+ "align": "right",+ "vertical": false,+ "h": 0.2+ },+ {+ "pad": "A2",+ "text": "VIN",+ "x": -0.625,+ "y": 0.2,+ "align": "right",+ "vertical": false,+ "h": 0.2+ },+ {+ "pad": "B1",+ "text": "VOUT",+ "x": 0.0,+ "y": -0.425,+ "align": "left",+ "vertical": true,+ "h": 0.2+ },+ {+ "pad": "B2",+ "text": "VIN",+ "x": 0.0,+ "y": 0.425,+ "align": "right",+ "vertical": true,+ "h": 0.2+ },+ {+ "pad": "C1",+ "text": "GND",+ "x": 0.625,+ "y": -0.2,+ "align": "left",+ "vertical": false,+ "h": 0.2+ },+ {+ "pad": "C2",+ "text": "EN",+ "x": 0.625,+ "y": 0.2,+ "align": "left",+ "vertical": false,+ "h": 0.2+ }+ ],+ "pads": [+ {+ "number": "A1",+ "shape": "circle",+ "center_mm": [+ -0.4,+ -0.2+ ],+ "size_mm": [+ 0.25,+ 0.25+ ],+ "rot": 90.0+ },+ {+ "number": "A2",+ "shape": "circle",+ "center_mm": [+ -0.4,+ 0.2+ ],+ "size_mm": [+ 0.25,+ 0.25+ ],+ "rot": 90.0+ },+ {+ "number": "B1",+ "shape": "circle",+ "center_mm": [+ 0.0,+ -0.2+ ],+ "size_mm": [+ 0.25,+ 0.25+ ],+ "rot": 90.0+ },+ {+ "number": "B2",+ "shape": "circle",+ "center_mm": [+ 0.0,+ 0.2+ ],+ "size_mm": [+ 0.25,+ 0.25+ ],+ "rot": 90.0+ },+ {+ "number": "C1",+ "shape": "circle",+ "center_mm": [+ 0.4,+ -0.2+ ],+ "size_mm": [+ 0.25,+ 0.25+ ],+ "rot": 90.0+ },+ {+ "number": "C2",+ "shape": "circle",+ "center_mm": [+ 0.4,+ 0.2+ ],+ "size_mm": [+ 0.25,+ 0.25+ ],+ "rot": 90.0+ }+ ]+}
mic94163ycs-tr.glbadded⋯ 1 unchanged line ⋯
mic94163ycs-tr.kicad_modadded+271@@ -0,0 +1,271 @@+(footprint "WLCSP-6_1.4x1.0mm_P0.4mm"+ (version 20260206)+ (generator "pcbnew")+ (generator_version "10.0")+ (layer "F.Cu")+ (descr "6pin Pitch 0.4mm")+ (tags "6pin Pitch 0.4mm WLCSP")+ (property "Reference" "REF**"+ (at 0 -1.7 0)+ (layer "F.SilkS")+ (uuid "585e127a-2744-477c-b42f-bc53b870a4f2")+ (effects+ (font+ (size 1 1)+ (thickness 0.15)+ )+ )+ )+ (property "Value" "WLCSP-6_1.4x1.0mm_P0.4mm"+ (at 0 1.8 0)+ (layer "F.Fab")+ (uuid "a354f091-b50d-4776-bbf7-5816a67dad2e")+ (effects+ (font+ (size 1 1)+ (thickness 0.15)+ )+ )+ )+ (property "Datasheet" ""+ (at 0 0 0)+ (unlocked yes)+ (layer "F.Fab")+ (hide yes)+ (uuid "582cd73d-2c12-438b-ba37-59585d6af207")+ (effects+ (font+ (size 1.27 1.27)+ (thickness 0.15)+ )+ )+ )+ (property "Description" ""+ (at 0 0 0)+ (unlocked yes)+ (layer "F.Fab")+ (hide yes)+ (uuid "2fa190e5-0e38-4a8b-9754-07140417860e")+ (effects+ (font+ (size 1.27 1.27)+ (thickness 0.15)+ )+ )+ )+ (attr smd)+ (duplicate_pad_numbers_are_jumpers no)+ (fp_line+ (start -0.78 0.58)+ (end -0.78 -0.26)+ (stroke+ (width 0.12)+ (type solid)+ )+ (layer "F.SilkS")+ (uuid "48568402-ad7e-47a8-8ac9-818724754d85")+ )+ (fp_line+ (start -0.46 -0.58)+ (end 0.78 -0.58)+ (stroke+ (width 0.12)+ (type solid)+ )+ (layer "F.SilkS")+ (uuid "25c0c0ac-7954-4364-9332-2f46dfc3b90e")+ )+ (fp_line+ (start 0.78 -0.58)+ (end 0.78 0.58)+ (stroke+ (width 0.12)+ (type solid)+ )+ (layer "F.SilkS")+ (uuid "39ef3618-b91b-4574-a6a5-1905a7922962")+ )+ (fp_line+ (start 0.78 0.58)+ (end -0.78 0.58)+ (stroke+ (width 0.12)+ (type solid)+ )+ (layer "F.SilkS")+ (uuid "61ca033a-4aa9-49cd-a8f9-6de53e685fc5")+ )+ (fp_poly+ (pts+ (xy -0.78 -0.58) (xy -1.28 -0.58) (xy -0.78 -1.08) (xy -0.78 -0.58)+ )+ (stroke+ (width 0.12)+ (type solid)+ )+ (fill yes)+ (layer "F.SilkS")+ (uuid "d35a0a5c-e743-4be3-ab0c-f026ee4b3367")+ )+ (fp_line+ (start -0.95 -0.75)+ (end 0.95 -0.75)+ (stroke+ (width 0.05)+ (type solid)+ )+ (layer "F.CrtYd")+ (uuid "d7856790-d5cd-4bef-83a5-109f966ed17f")+ )+ (fp_line+ (start -0.95 0.75)+ (end -0.95 -0.75)+ (stroke+ (width 0.05)+ (type solid)+ )+ (layer "F.CrtYd")+ (uuid "0cca7be8-2fee-4dbb-b520-bc078a9d518d")+ )+ (fp_line+ (start 0.95 -0.75)+ (end 0.95 0.75)+ (stroke+ (width 0.05)+ (type solid)+ )+ (layer "F.CrtYd")+ (uuid "b957eff6-ef20-4493-829c-531b659c572b")+ )+ (fp_line+ (start 0.95 0.75)+ (end -0.95 0.75)+ (stroke+ (width 0.05)+ (type solid)+ )+ (layer "F.CrtYd")+ (uuid "ce3346eb-3eb3-4787-9126-fa477c8423ab")+ )+ (fp_line+ (start -0.68 -0.1)+ (end -0.3 -0.48)+ (stroke+ (width 0.1)+ (type solid)+ )+ (layer "F.Fab")+ (uuid "9fa76c48-a468-4af6-922c-5103e1cb1781")+ )+ (fp_line+ (start -0.68 0.48)+ (end -0.68 -0.1)+ (stroke+ (width 0.1)+ (type solid)+ )+ (layer "F.Fab")+ (uuid "c1f00db6-aa98-4653-8815-ecb15e3585a0")+ )+ (fp_line+ (start -0.3 -0.48)+ (end 0.68 -0.48)+ (stroke+ (width 0.1)+ (type solid)+ )+ (layer "F.Fab")+ (uuid "88379976-1203-4523-ad0f-78023598a881")+ )+ (fp_line+ (start 0.68 -0.48)+ (end 0.68 0.48)+ (stroke+ (width 0.1)+ (type solid)+ )+ (layer "F.Fab")+ (uuid "cb172f40-a453-437b-b21c-a0814dbea194")+ )+ (fp_line+ (start 0.68 0.48)+ (end -0.68 0.48)+ (stroke+ (width 0.1)+ (type solid)+ )+ (layer "F.Fab")+ (uuid "a2ab13fb-8819-4f92-b595-a6e4a8e355e7")+ )+ (fp_text user "${REFERENCE}"+ (at 0 -1.7 0)+ (layer "F.Fab")+ (uuid "bc297a38-e18e-4cee-abec-aef27495a992")+ (effects+ (font+ (size 1 1)+ (thickness 0.15)+ )+ )+ )+ (pad "A1" smd circle+ (at -0.4 -0.2 90)+ (size 0.25 0.25)+ (property pad_prop_bga)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (solder_mask_margin 0.1)+ (uuid "783b9064-52e0-4cd9-bae3-2929b88de833")+ )+ (pad "A2" smd circle+ (at -0.4 0.2 90)+ (size 0.25 0.25)+ (property pad_prop_bga)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (solder_mask_margin 0.1)+ (uuid "b9e9c194-4f0c-418b-a25f-499e7c4ad148")+ )+ (pad "B1" smd circle+ (at 0 -0.2 90)+ (size 0.25 0.25)+ (property pad_prop_bga)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (solder_mask_margin 0.1)+ (uuid "eeb264c8-6283-4b28-83f0-6c83c200fd80")+ )+ (pad "B2" smd circle+ (at 0 0.2 90)+ (size 0.25 0.25)+ (property pad_prop_bga)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (solder_mask_margin 0.1)+ (uuid "a926d02c-6ee3-46a4-9fb9-852f1e562f34")+ )+ (pad "C1" smd circle+ (at 0.4 -0.2 90)+ (size 0.25 0.25)+ (property pad_prop_bga)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (solder_mask_margin 0.1)+ (uuid "10102b9e-e1dc-402a-b168-48d4dffdc25e")+ )+ (pad "C2" smd circle+ (at 0.4 0.2 90)+ (size 0.25 0.25)+ (property pad_prop_bga)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (solder_mask_margin 0.1)+ (uuid "7649ec51-f78d-4210-95ad-4d4ebc0628fb")+ )+ (embedded_fonts no)+ (model "${KICAD10_3DMODEL_DIR}/Package_CSP.3dshapes/WLCSP-6_1.4x1.0mm_P0.4mm.step"+ (offset+ (xyz 0 0 0)+ )+ (scale+ (xyz 1 1 1)+ )+ (rotate+ (xyz 0 0 0)+ )+ )+)
mic94163ycs-tr.kicad_symadded+37@@ -0,0 +1,37 @@+(kicad_symbol_lib (version 20211014) (generator ds2sf_rect)+ (symbol "MIC94163YCS-TR" (in_bom yes) (on_board yes)+ (property "Reference" "U" (at 0 7.62 0) (effects (font (size 1.27 1.27))))+ (property "Value" "MIC94163YCS-TR" (at 0 -7.62 0) (effects (font (size 1.27 1.27))))+ (property "Footprint" "" (at 0 0 0) (effects (font (size 1.27 1.27)) hide))+ (symbol "MIC94163YCS-TR_0_1"+ (rectangle (start -12.70 5.08) (end 12.70 -5.08)+ (stroke (width 0.254) (type default)) (fill (type background)))+ )+ (symbol "MIC94163YCS-TR_1_1"+ (pin power_out line (at -17.78 2.54 0) (length 5.08)+ (name "VOUT" (effects (font (size 1.27 1.27))))+ (number "A1" (effects (font (size 1.27 1.27))))+ )+ (pin power_in line (at -17.78 0.00 0) (length 5.08)+ (name "VIN" (effects (font (size 1.27 1.27))))+ (number "A2" (effects (font (size 1.27 1.27))))+ )+ (pin power_out line (at -17.78 -2.54 0) (length 5.08)+ (name "VOUT" (effects (font (size 1.27 1.27))))+ (number "B1" (effects (font (size 1.27 1.27))))+ )+ (pin input line (at 17.78 2.54 180) (length 5.08)+ (name "EN" (effects (font (size 1.27 1.27))))+ (number "C2" (effects (font (size 1.27 1.27))))+ )+ (pin power_in line (at 17.78 0.00 180) (length 5.08)+ (name "GND" (effects (font (size 1.27 1.27))))+ (number "C1" (effects (font (size 1.27 1.27))))+ )+ (pin power_in line (at 17.78 -2.54 180) (length 5.08)+ (name "VIN" (effects (font (size 1.27 1.27))))+ (number "B2" (effects (font (size 1.27 1.27))))+ )+ )+ )+)
mic94163ycs-tr.lbradded+121@@ -0,0 +1,121 @@+<?xml version="1.0" encoding="utf-8"?>+<!DOCTYPE eagle SYSTEM "eagle.dtd">+<eagle version="9.6.2">+<drawing>+<settings><setting alwaysvectorfont="no"/></settings>+<grid distance="0.1" unitdist="inch" unit="inch" style="lines" multiple="1" display="no" altdistance="0.01" altunitdist="inch" altunit="inch"/>+<layers>+<layer number="1" name="Top" color="4" fill="1" visible="yes" active="yes"/>+<layer number="16" name="Bottom" color="1" fill="1" visible="yes" active="yes"/>+<layer number="17" name="Pads" color="2" fill="1" visible="yes" active="yes"/>+<layer number="18" name="Vias" color="2" fill="1" visible="yes" active="yes"/>+<layer number="19" name="Unrouted" color="6" fill="1" visible="yes" active="yes"/>+<layer number="20" name="Dimension" color="15" fill="1" visible="yes" active="yes"/>+<layer number="21" name="tPlace" color="7" fill="1" visible="yes" active="yes"/>+<layer number="22" name="bPlace" color="7" fill="1" visible="yes" active="yes"/>+<layer number="23" name="tOrigins" color="15" fill="1" visible="yes" active="yes"/>+<layer number="24" name="bOrigins" color="15" fill="1" visible="yes" active="yes"/>+<layer number="25" name="tNames" color="7" fill="1" visible="yes" active="yes"/>+<layer number="26" name="bNames" color="7" fill="1" visible="yes" active="yes"/>+<layer number="27" name="tValues" color="7" fill="1" visible="yes" active="yes"/>+<layer number="28" name="bValues" color="7" fill="1" visible="yes" active="yes"/>+<layer number="29" name="tStop" color="7" fill="3" visible="no" active="yes"/>+<layer number="30" name="bStop" color="7" fill="6" visible="no" active="yes"/>+<layer number="31" name="tCream" color="7" fill="4" visible="no" active="yes"/>+<layer number="32" name="bCream" color="7" fill="5" visible="no" active="yes"/>+<layer number="33" name="tFinish" color="6" fill="3" visible="no" active="yes"/>+<layer number="34" name="bFinish" color="6" fill="6" visible="no" active="yes"/>+<layer number="35" name="tGlue" color="7" fill="4" visible="no" active="yes"/>+<layer number="36" name="bGlue" color="7" fill="5" visible="no" active="yes"/>+<layer number="37" name="tTest" color="7" fill="1" visible="no" active="yes"/>+<layer number="38" name="bTest" color="7" fill="1" visible="no" active="yes"/>+<layer number="39" name="tKeepout" color="4" fill="11" visible="no" active="yes"/>+<layer number="40" name="bKeepout" color="1" fill="11" visible="no" active="yes"/>+<layer number="41" name="tRestrict" color="4" fill="10" visible="no" active="yes"/>+<layer number="42" name="bRestrict" color="1" fill="10" visible="no" active="yes"/>+<layer number="43" name="vRestrict" color="2" fill="10" visible="no" active="yes"/>+<layer number="44" name="Drills" color="7" fill="1" visible="no" active="yes"/>+<layer number="45" name="Holes" color="7" fill="1" visible="no" active="yes"/>+<layer number="46" name="Milling" color="3" fill="1" visible="no" active="yes"/>+<layer number="47" name="Measures" color="7" fill="1" visible="no" active="yes"/>+<layer number="48" name="Document" color="7" fill="1" visible="yes" active="yes"/>+<layer number="49" name="Reference" color="7" fill="1" visible="yes" active="yes"/>+<layer number="91" name="Nets" color="2" fill="1" visible="yes" active="yes"/>+<layer number="92" name="Busses" color="1" fill="1" visible="yes" active="yes"/>+<layer number="93" name="Pins" color="2" fill="1" visible="no" active="yes"/>+<layer number="94" name="Symbols" color="4" fill="1" visible="yes" active="yes"/>+<layer number="95" name="Names" color="7" fill="1" visible="yes" active="yes"/>+<layer number="96" name="Values" color="7" fill="1" visible="yes" active="yes"/>+<layer number="97" name="Info" color="7" fill="1" visible="yes" active="yes"/>+<layer number="98" name="Guide" color="6" fill="1" visible="yes" active="yes"/>+</layers>+<library>+<description></description>+<packages>+<package name="WLCSP-6_1.4x1.0mm_P0.4mm">+ <description>WLCSP-6, 1.4 x 1.0 mm, 0.4 mm pitch. 6pin Pitch 0.4mm</description>+ <smd name="A1" x="-0.4000" y="0.2000" dx="0.2500" dy="0.2500" layer="1" rot="R90" roundness="100"/>+ <smd name="A2" x="-0.4000" y="-0.2000" dx="0.2500" dy="0.2500" layer="1" rot="R90" roundness="100"/>+ <smd name="B1" x="0.0000" y="0.2000" dx="0.2500" dy="0.2500" layer="1" rot="R90" roundness="100"/>+ <smd name="B2" x="0.0000" y="-0.2000" dx="0.2500" dy="0.2500" layer="1" rot="R90" roundness="100"/>+ <smd name="C1" x="0.4000" y="0.2000" dx="0.2500" dy="0.2500" layer="1" rot="R90" roundness="100"/>+ <smd name="C2" x="0.4000" y="-0.2000" dx="0.2500" dy="0.2500" layer="1" rot="R90" roundness="100"/>+ <polygon width="0.1200" layer="21">+ <vertex x="-0.7800" y="0.5800"/>+ <vertex x="-1.2800" y="0.5800"/>+ <vertex x="-0.7800" y="1.0800"/>+ <vertex x="-0.7800" y="0.5800"/>+ </polygon>+ <wire x1="-0.7800" y1="-0.5800" x2="-0.7800" y2="0.2600" width="0.1200" layer="21"/>+ <wire x1="-0.4600" y1="0.5800" x2="0.7800" y2="0.5800" width="0.1200" layer="21"/>+ <wire x1="0.7800" y1="0.5800" x2="0.7800" y2="-0.5800" width="0.1200" layer="21"/>+ <wire x1="0.7800" y1="-0.5800" x2="-0.7800" y2="-0.5800" width="0.1200" layer="21"/>+ <wire x1="-0.6800" y1="0.1000" x2="-0.3000" y2="0.4800" width="0.1000" layer="51"/>+ <wire x1="-0.6800" y1="-0.4800" x2="-0.6800" y2="0.1000" width="0.1000" layer="51"/>+ <wire x1="-0.3000" y1="0.4800" x2="0.6800" y2="0.4800" width="0.1000" layer="51"/>+ <wire x1="0.6800" y1="0.4800" x2="0.6800" y2="-0.4800" width="0.1000" layer="51"/>+ <wire x1="0.6800" y1="-0.4800" x2="-0.6800" y2="-0.4800" width="0.1000" layer="51"/>+ <text x="0" y="1.180" size="1.27" layer="25" align="bottom-center">>NAME</text>+ <text x="0" y="-1.180" size="1.27" layer="27" align="top-center">>VALUE</text>+</package>+</packages>+<symbols>+<symbol name="MIC94163YCS-TR">+ <wire x1="-12.7" y1="5.08" x2="12.7" y2="5.08" width="0.254" layer="94"/>+ <wire x1="12.7" y1="5.08" x2="12.7" y2="-5.08" width="0.254" layer="94"/>+ <wire x1="12.7" y1="-5.08" x2="-12.7" y2="-5.08" width="0.254" layer="94"/>+ <wire x1="-12.7" y1="-5.08" x2="-12.7" y2="5.08" width="0.254" layer="94"/>+ <text x="0.0000" y="7.6200" size="1.27" layer="95" align="center">>NAME</text>+ <text x="0.0000" y="-7.6200" size="1.27" layer="96" align="center">>VALUE</text>+ <pin name="VOUT" x="-17.78" y="2.54" length="middle" direction="out"/>+ <pin name="VIN" x="-17.78" y="0" length="middle" direction="pwr"/>+ <pin name="VOUT@2" x="-17.78" y="-2.54" length="middle" direction="out"/>+ <pin name="EN" x="17.78" y="2.54" length="middle" direction="in" rot="R180"/>+ <pin name="GND" x="17.78" y="0" length="middle" direction="pwr" rot="R180"/>+ <pin name="VIN@2" x="17.78" y="-2.54" length="middle" direction="pwr" rot="R180"/>+</symbol>+</symbols>+<devicesets>+<deviceset name="MIC94163YCS-TR" prefix="U">+ <description></description>+ <gates>+ <gate name="G$1" symbol="MIC94163YCS-TR" x="0" y="0"/>+ </gates>+ <devices>+ <device name="" package="WLCSP-6_1.4x1.0mm_P0.4mm">+ <connects>+ <connect gate="G$1" pin="VOUT" pad="A1"/>+ <connect gate="G$1" pin="VIN" pad="A2"/>+ <connect gate="G$1" pin="VOUT@2" pad="B1"/>+ <connect gate="G$1" pin="EN" pad="C2"/>+ <connect gate="G$1" pin="GND" pad="C1"/>+ <connect gate="G$1" pin="VIN@2" pad="B2"/>+ </connects>+ <technologies><technology name=""/></technologies>+ </device>+ </devices>+</deviceset>+</devicesets>+</library>+</drawing>+</eagle>
mic94163ycs-tr.stepadded+1113@@ -0,0 +1,1113 @@+ISO-10303-21;+HEADER;+FILE_DESCRIPTION(('Open CASCADE Model'),'2;1');+FILE_NAME('Open CASCADE Shape Model','2026-10-23T09:22:58',('Author'),(+ 'Open CASCADE'),'Open CASCADE STEP processor 7.9','Open CASCADE 7.9'+ ,'Unknown');+FILE_SCHEMA(('AUTOMOTIVE_DESIGN { 1 0 10303 214 1 1 1 1 }'));+ENDSEC;+DATA;+#1 = APPLICATION_PROTOCOL_DEFINITION('international standard',+ 'automotive_design',2000,#2);+#2 = APPLICATION_CONTEXT(+ 'core data for automotive mechanical design processes');+#3 = SHAPE_DEFINITION_REPRESENTATION(#4,#10);+#4 = PRODUCT_DEFINITION_SHAPE('','',#5);+#5 = PRODUCT_DEFINITION('design','',#6,#9);+#6 = PRODUCT_DEFINITION_FORMATION('','',#7);+#7 = PRODUCT('MIC94163YCS-TR','MIC94163YCS-TR','',(#8));+#8 = PRODUCT_CONTEXT('',#2,'mechanical');+#9 = PRODUCT_DEFINITION_CONTEXT('part definition',#2,'design');+#10 = SHAPE_REPRESENTATION('',(#11,#15,#655,#667,#679,#691,#703,#715,+ #727),#825);+#11 = AXIS2_PLACEMENT_3D('',#12,#13,#14);+#12 = CARTESIAN_POINT('',(0.,0.,0.));+#13 = DIRECTION('',(0.,0.,1.));+#14 = DIRECTION('',(1.,0.,-0.));+#15 = MANIFOLD_SOLID_BREP('',#16);+#16 = CLOSED_SHELL('',(#17,#137,#218,#299,#348,#397,#429,#478,#562,#589,+ #596,#651));+#17 = ADVANCED_FACE('',(#18),#32,.F.);+#18 = FACE_BOUND('',#19,.F.);+#19 = EDGE_LOOP('',(#20,#55,#83,#111));+#20 = ORIENTED_EDGE('',*,*,#21,.F.);+#21 = EDGE_CURVE('',#22,#24,#26,.T.);+#22 = VERTEX_POINT('',#23);+#23 = CARTESIAN_POINT('',(-0.68,-0.48,0.20625));+#24 = VERTEX_POINT('',#25);+#25 = CARTESIAN_POINT('',(-0.68,-0.48,0.51425));+#26 = SURFACE_CURVE('',#27,(#31,#43),.PCURVE_S1.);+#27 = LINE('',#28,#29);+#28 = CARTESIAN_POINT('',(-0.68,-0.48,0.20625));+#29 = VECTOR('',#30,1.);+#30 = DIRECTION('',(0.,0.,1.));+#31 = PCURVE('',#32,#37);+#32 = PLANE('',#33);+#33 = AXIS2_PLACEMENT_3D('',#34,#35,#36);+#34 = CARTESIAN_POINT('',(-0.68,-0.48,0.20625));+#35 = DIRECTION('',(1.,0.,0.));+#36 = DIRECTION('',(0.,0.,1.));+#37 = DEFINITIONAL_REPRESENTATION('',(#38),#42);+#38 = LINE('',#39,#40);+#39 = CARTESIAN_POINT('',(0.,0.));+#40 = VECTOR('',#41,1.);+#41 = DIRECTION('',(1.,0.));+#42 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#43 = PCURVE('',#44,#49);+#44 = PLANE('',#45);+#45 = AXIS2_PLACEMENT_3D('',#46,#47,#48);+#46 = CARTESIAN_POINT('',(-0.68,-0.48,0.20625));+#47 = DIRECTION('',(0.,1.,0.));+#48 = DIRECTION('',(0.,0.,1.));+#49 = DEFINITIONAL_REPRESENTATION('',(#50),#54);+#50 = LINE('',#51,#52);+#51 = CARTESIAN_POINT('',(0.,0.));+#52 = VECTOR('',#53,1.);+#53 = DIRECTION('',(1.,0.));+#54 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#55 = ORIENTED_EDGE('',*,*,#56,.T.);+#56 = EDGE_CURVE('',#22,#57,#59,.T.);+#57 = VERTEX_POINT('',#58);+#58 = CARTESIAN_POINT('',(-0.68,0.48,0.20625));+#59 = SURFACE_CURVE('',#60,(#64,#71),.PCURVE_S1.);+#60 = LINE('',#61,#62);+#61 = CARTESIAN_POINT('',(-0.68,-0.48,0.20625));+#62 = VECTOR('',#63,1.);+#63 = DIRECTION('',(0.,1.,0.));+#64 = PCURVE('',#32,#65);+#65 = DEFINITIONAL_REPRESENTATION('',(#66),#70);+#66 = LINE('',#67,#68);+#67 = CARTESIAN_POINT('',(0.,0.));+#68 = VECTOR('',#69,1.);+#69 = DIRECTION('',(0.,-1.));+#70 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#71 = PCURVE('',#72,#77);+#72 = PLANE('',#73);+#73 = AXIS2_PLACEMENT_3D('',#74,#75,#76);+#74 = CARTESIAN_POINT('',(-0.68,-0.48,0.20625));+#75 = DIRECTION('',(0.,0.,1.));+#76 = DIRECTION('',(1.,0.,0.));+#77 = DEFINITIONAL_REPRESENTATION('',(#78),#82);+#78 = LINE('',#79,#80);+#79 = CARTESIAN_POINT('',(0.,0.));+#80 = VECTOR('',#81,1.);+#81 = DIRECTION('',(0.,1.));+#82 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#83 = ORIENTED_EDGE('',*,*,#84,.T.);+#84 = EDGE_CURVE('',#57,#85,#87,.T.);+#85 = VERTEX_POINT('',#86);+#86 = CARTESIAN_POINT('',(-0.68,0.48,0.51425));+#87 = SURFACE_CURVE('',#88,(#92,#99),.PCURVE_S1.);+#88 = LINE('',#89,#90);+#89 = CARTESIAN_POINT('',(-0.68,0.48,0.20625));+#90 = VECTOR('',#91,1.);+#91 = DIRECTION('',(0.,0.,1.));+#92 = PCURVE('',#32,#93);+#93 = DEFINITIONAL_REPRESENTATION('',(#94),#98);+#94 = LINE('',#95,#96);+#95 = CARTESIAN_POINT('',(0.,-0.96));+#96 = VECTOR('',#97,1.);+#97 = DIRECTION('',(1.,0.));+#98 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#99 = PCURVE('',#100,#105);+#100 = PLANE('',#101);+#101 = AXIS2_PLACEMENT_3D('',#102,#103,#104);+#102 = CARTESIAN_POINT('',(-0.68,0.48,0.20625));+#103 = DIRECTION('',(0.,1.,0.));+#104 = DIRECTION('',(0.,0.,1.));+#105 = DEFINITIONAL_REPRESENTATION('',(#106),#110);+#106 = LINE('',#107,#108);+#107 = CARTESIAN_POINT('',(0.,0.));+#108 = VECTOR('',#109,1.);+#109 = DIRECTION('',(1.,0.));+#110 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#111 = ORIENTED_EDGE('',*,*,#112,.F.);+#112 = EDGE_CURVE('',#24,#85,#113,.T.);+#113 = SURFACE_CURVE('',#114,(#118,#125),.PCURVE_S1.);+#114 = LINE('',#115,#116);+#115 = CARTESIAN_POINT('',(-0.68,-0.48,0.51425));+#116 = VECTOR('',#117,1.);+#117 = DIRECTION('',(0.,1.,0.));+#118 = PCURVE('',#32,#119);+#119 = DEFINITIONAL_REPRESENTATION('',(#120),#124);+#120 = LINE('',#121,#122);+#121 = CARTESIAN_POINT('',(0.308,0.));+#122 = VECTOR('',#123,1.);+#123 = DIRECTION('',(0.,-1.));+#124 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#125 = PCURVE('',#126,#131);+#126 = PLANE('',#127);+#127 = AXIS2_PLACEMENT_3D('',#128,#129,#130);+#128 = CARTESIAN_POINT('',(-0.659,-0.48,0.53525));+#129 = DIRECTION('',(0.707106781187,0.,-0.707106781187));+#130 = DIRECTION('',(0.,1.,0.));+#131 = DEFINITIONAL_REPRESENTATION('',(#132),#136);+#132 = LINE('',#133,#134);+#133 = CARTESIAN_POINT('',(0.,-2.969848480984E-02));+#134 = VECTOR('',#135,1.);+#135 = DIRECTION('',(1.,0.));+#136 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#137 = ADVANCED_FACE('',(#138),#44,.F.);+#138 = FACE_BOUND('',#139,.F.);+#139 = EDGE_LOOP('',(#140,#170,#191,#192));+#140 = ORIENTED_EDGE('',*,*,#141,.F.);+#141 = EDGE_CURVE('',#142,#144,#146,.T.);+#142 = VERTEX_POINT('',#143);+#143 = CARTESIAN_POINT('',(0.68,-0.48,0.20625));+#144 = VERTEX_POINT('',#145);+#145 = CARTESIAN_POINT('',(0.68,-0.48,0.51425));+#146 = SURFACE_CURVE('',#147,(#151,#158),.PCURVE_S1.);+#147 = LINE('',#148,#149);+#148 = CARTESIAN_POINT('',(0.68,-0.48,0.20625));+#149 = VECTOR('',#150,1.);+#150 = DIRECTION('',(0.,0.,1.));+#151 = PCURVE('',#44,#152);+#152 = DEFINITIONAL_REPRESENTATION('',(#153),#157);+#153 = LINE('',#154,#155);+#154 = CARTESIAN_POINT('',(0.,1.36));+#155 = VECTOR('',#156,1.);+#156 = DIRECTION('',(1.,0.));+#157 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#158 = PCURVE('',#159,#164);+#159 = PLANE('',#160);+#160 = AXIS2_PLACEMENT_3D('',#161,#162,#163);+#161 = CARTESIAN_POINT('',(0.68,-0.48,0.20625));+#162 = DIRECTION('',(1.,0.,0.));+#163 = DIRECTION('',(0.,0.,1.));+#164 = DEFINITIONAL_REPRESENTATION('',(#165),#169);+#165 = LINE('',#166,#167);+#166 = CARTESIAN_POINT('',(0.,0.));+#167 = VECTOR('',#168,1.);+#168 = DIRECTION('',(1.,0.));+#169 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#170 = ORIENTED_EDGE('',*,*,#171,.F.);+#171 = EDGE_CURVE('',#22,#142,#172,.T.);+#172 = SURFACE_CURVE('',#173,(#177,#184),.PCURVE_S1.);+#173 = LINE('',#174,#175);+#174 = CARTESIAN_POINT('',(-0.68,-0.48,0.20625));+#175 = VECTOR('',#176,1.);+#176 = DIRECTION('',(1.,0.,0.));+#177 = PCURVE('',#44,#178);+#178 = DEFINITIONAL_REPRESENTATION('',(#179),#183);+#179 = LINE('',#180,#181);+#180 = CARTESIAN_POINT('',(0.,0.));+#181 = VECTOR('',#182,1.);+#182 = DIRECTION('',(0.,1.));+#183 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#184 = PCURVE('',#72,#185);+#185 = DEFINITIONAL_REPRESENTATION('',(#186),#190);+#186 = LINE('',#187,#188);+#187 = CARTESIAN_POINT('',(0.,0.));+#188 = VECTOR('',#189,1.);+#189 = DIRECTION('',(1.,0.));+#190 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#191 = ORIENTED_EDGE('',*,*,#21,.T.);+#192 = ORIENTED_EDGE('',*,*,#193,.T.);+#193 = EDGE_CURVE('',#24,#144,#194,.T.);+#194 = SURFACE_CURVE('',#195,(#199,#206),.PCURVE_S1.);+#195 = LINE('',#196,#197);+#196 = CARTESIAN_POINT('',(-0.68,-0.48,0.51425));+#197 = VECTOR('',#198,1.);+#198 = DIRECTION('',(1.,0.,0.));+#199 = PCURVE('',#44,#200);+#200 = DEFINITIONAL_REPRESENTATION('',(#201),#205);+#201 = LINE('',#202,#203);+#202 = CARTESIAN_POINT('',(0.308,0.));+#203 = VECTOR('',#204,1.);+#204 = DIRECTION('',(0.,1.));+#205 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#206 = PCURVE('',#207,#212);+#207 = PLANE('',#208);+#208 = AXIS2_PLACEMENT_3D('',#209,#210,#211);+#209 = CARTESIAN_POINT('',(-0.68,-0.459,0.53525));+#210 = DIRECTION('',(0.,0.707106781187,-0.707106781187));+#211 = DIRECTION('',(-1.,0.,0.));+#212 = DEFINITIONAL_REPRESENTATION('',(#213),#217);+#213 = LINE('',#214,#215);+#214 = CARTESIAN_POINT('',(0.,-2.969848480984E-02));+#215 = VECTOR('',#216,1.);+#216 = DIRECTION('',(-1.,0.));+#217 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#218 = ADVANCED_FACE('',(#219),#126,.F.);+#219 = FACE_BOUND('',#220,.F.);+#220 = EDGE_LOOP('',(#221,#244,#245,#273));+#221 = ORIENTED_EDGE('',*,*,#222,.F.);+#222 = EDGE_CURVE('',#24,#223,#225,.T.);+#223 = VERTEX_POINT('',#224);+#224 = CARTESIAN_POINT('',(-0.638,-0.438,0.55625));+#225 = SURFACE_CURVE('',#226,(#230,#237),.PCURVE_S1.);+#226 = LINE('',#227,#228);+#227 = CARTESIAN_POINT('',(-0.666,-0.466,0.52825));+#228 = VECTOR('',#229,1.);+#229 = DIRECTION('',(0.57735026919,0.57735026919,0.57735026919));+#230 = PCURVE('',#126,#231);+#231 = DEFINITIONAL_REPRESENTATION('',(#232),#236);+#232 = LINE('',#233,#234);+#233 = CARTESIAN_POINT('',(1.4E-02,-9.899494936612E-03));+#234 = VECTOR('',#235,1.);+#235 = DIRECTION('',(0.57735026919,0.816496580928));+#236 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#237 = PCURVE('',#207,#238);+#238 = DEFINITIONAL_REPRESENTATION('',(#239),#243);+#239 = LINE('',#240,#241);+#240 = CARTESIAN_POINT('',(-1.4E-02,-9.899494936612E-03));+#241 = VECTOR('',#242,1.);+#242 = DIRECTION('',(-0.57735026919,0.816496580928));+#243 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#244 = ORIENTED_EDGE('',*,*,#112,.T.);+#245 = ORIENTED_EDGE('',*,*,#246,.T.);+#246 = EDGE_CURVE('',#85,#247,#249,.T.);+#247 = VERTEX_POINT('',#248);+#248 = CARTESIAN_POINT('',(-0.638,0.438,0.55625));+#249 = SURFACE_CURVE('',#250,(#254,#261),.PCURVE_S1.);+#250 = LINE('',#251,#252);+#251 = CARTESIAN_POINT('',(-0.506,0.306,0.68825));+#252 = VECTOR('',#253,1.);+#253 = DIRECTION('',(0.57735026919,-0.57735026919,0.57735026919));+#254 = PCURVE('',#126,#255);+#255 = DEFINITIONAL_REPRESENTATION('',(#256),#260);+#256 = LINE('',#257,#258);+#257 = CARTESIAN_POINT('',(0.786,0.216374675043));+#258 = VECTOR('',#259,1.);+#259 = DIRECTION('',(-0.57735026919,0.816496580928));+#260 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#261 = PCURVE('',#262,#267);+#262 = PLANE('',#263);+#263 = AXIS2_PLACEMENT_3D('',#264,#265,#266);+#264 = CARTESIAN_POINT('',(-0.68,0.459,0.53525));+#265 = DIRECTION('',(0.,0.707106781187,0.707106781187));+#266 = DIRECTION('',(-1.,0.,0.));+#267 = DEFINITIONAL_REPRESENTATION('',(#268),#272);+#268 = LINE('',#269,#270);+#269 = CARTESIAN_POINT('',(-0.174,0.216374675043));+#270 = VECTOR('',#271,1.);+#271 = DIRECTION('',(-0.57735026919,0.816496580928));+#272 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#273 = ORIENTED_EDGE('',*,*,#274,.F.);+#274 = EDGE_CURVE('',#223,#247,#275,.T.);+#275 = SURFACE_CURVE('',#276,(#280,#287),.PCURVE_S1.);+#276 = LINE('',#277,#278);+#277 = CARTESIAN_POINT('',(-0.638,-0.48,0.55625));+#278 = VECTOR('',#279,1.);+#279 = DIRECTION('',(0.,1.,0.));+#280 = PCURVE('',#126,#281);+#281 = DEFINITIONAL_REPRESENTATION('',(#282),#286);+#282 = LINE('',#283,#284);+#283 = CARTESIAN_POINT('',(0.,2.969848480984E-02));+#284 = VECTOR('',#285,1.);+#285 = DIRECTION('',(1.,0.));+#286 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#287 = PCURVE('',#288,#293);+#288 = PLANE('',#289);+#289 = AXIS2_PLACEMENT_3D('',#290,#291,#292);+#290 = CARTESIAN_POINT('',(-0.68,-0.48,0.55625));+#291 = DIRECTION('',(0.,0.,1.));+#292 = DIRECTION('',(1.,0.,0.));+#293 = DEFINITIONAL_REPRESENTATION('',(#294),#298);+#294 = LINE('',#295,#296);+#295 = CARTESIAN_POINT('',(4.2E-02,0.));+#296 = VECTOR('',#297,1.);+#297 = DIRECTION('',(0.,1.));+#298 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#299 = ADVANCED_FACE('',(#300),#72,.F.);+#300 = FACE_BOUND('',#301,.F.);+#301 = EDGE_LOOP('',(#302,#303,#304,#327));+#302 = ORIENTED_EDGE('',*,*,#56,.F.);+#303 = ORIENTED_EDGE('',*,*,#171,.T.);+#304 = ORIENTED_EDGE('',*,*,#305,.T.);+#305 = EDGE_CURVE('',#142,#306,#308,.T.);+#306 = VERTEX_POINT('',#307);+#307 = CARTESIAN_POINT('',(0.68,0.48,0.20625));+#308 = SURFACE_CURVE('',#309,(#313,#320),.PCURVE_S1.);+#309 = LINE('',#310,#311);+#310 = CARTESIAN_POINT('',(0.68,-0.48,0.20625));+#311 = VECTOR('',#312,1.);+#312 = DIRECTION('',(0.,1.,0.));+#313 = PCURVE('',#72,#314);+#314 = DEFINITIONAL_REPRESENTATION('',(#315),#319);+#315 = LINE('',#316,#317);+#316 = CARTESIAN_POINT('',(1.36,0.));+#317 = VECTOR('',#318,1.);+#318 = DIRECTION('',(0.,1.));+#319 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#320 = PCURVE('',#159,#321);+#321 = DEFINITIONAL_REPRESENTATION('',(#322),#326);+#322 = LINE('',#323,#324);+#323 = CARTESIAN_POINT('',(0.,0.));+#324 = VECTOR('',#325,1.);+#325 = DIRECTION('',(0.,-1.));+#326 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#327 = ORIENTED_EDGE('',*,*,#328,.F.);+#328 = EDGE_CURVE('',#57,#306,#329,.T.);+#329 = SURFACE_CURVE('',#330,(#334,#341),.PCURVE_S1.);+#330 = LINE('',#331,#332);+#331 = CARTESIAN_POINT('',(-0.68,0.48,0.20625));+#332 = VECTOR('',#333,1.);+#333 = DIRECTION('',(1.,0.,0.));+#334 = PCURVE('',#72,#335);+#335 = DEFINITIONAL_REPRESENTATION('',(#336),#340);+#336 = LINE('',#337,#338);+#337 = CARTESIAN_POINT('',(0.,0.96));+#338 = VECTOR('',#339,1.);+#339 = DIRECTION('',(1.,0.));+#340 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#341 = PCURVE('',#100,#342);+#342 = DEFINITIONAL_REPRESENTATION('',(#343),#347);+#343 = LINE('',#344,#345);+#344 = CARTESIAN_POINT('',(0.,0.));+#345 = VECTOR('',#346,1.);+#346 = DIRECTION('',(0.,1.));+#347 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#348 = ADVANCED_FACE('',(#349),#100,.T.);+#349 = FACE_BOUND('',#350,.T.);+#350 = EDGE_LOOP('',(#351,#374,#375,#376));+#351 = ORIENTED_EDGE('',*,*,#352,.F.);+#352 = EDGE_CURVE('',#306,#353,#355,.T.);+#353 = VERTEX_POINT('',#354);+#354 = CARTESIAN_POINT('',(0.68,0.48,0.51425));+#355 = SURFACE_CURVE('',#356,(#360,#367),.PCURVE_S1.);+#356 = LINE('',#357,#358);+#357 = CARTESIAN_POINT('',(0.68,0.48,0.20625));+#358 = VECTOR('',#359,1.);+#359 = DIRECTION('',(0.,0.,1.));+#360 = PCURVE('',#100,#361);+#361 = DEFINITIONAL_REPRESENTATION('',(#362),#366);+#362 = LINE('',#363,#364);+#363 = CARTESIAN_POINT('',(0.,1.36));+#364 = VECTOR('',#365,1.);+#365 = DIRECTION('',(1.,0.));+#366 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#367 = PCURVE('',#159,#368);+#368 = DEFINITIONAL_REPRESENTATION('',(#369),#373);+#369 = LINE('',#370,#371);+#370 = CARTESIAN_POINT('',(0.,-0.96));+#371 = VECTOR('',#372,1.);+#372 = DIRECTION('',(1.,0.));+#373 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#374 = ORIENTED_EDGE('',*,*,#328,.F.);+#375 = ORIENTED_EDGE('',*,*,#84,.T.);+#376 = ORIENTED_EDGE('',*,*,#377,.T.);+#377 = EDGE_CURVE('',#85,#353,#378,.T.);+#378 = SURFACE_CURVE('',#379,(#383,#390),.PCURVE_S1.);+#379 = LINE('',#380,#381);+#380 = CARTESIAN_POINT('',(-0.68,0.48,0.51425));+#381 = VECTOR('',#382,1.);+#382 = DIRECTION('',(1.,0.,0.));+#383 = PCURVE('',#100,#384);+#384 = DEFINITIONAL_REPRESENTATION('',(#385),#389);+#385 = LINE('',#386,#387);+#386 = CARTESIAN_POINT('',(0.308,0.));+#387 = VECTOR('',#388,1.);+#388 = DIRECTION('',(0.,1.));+#389 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#390 = PCURVE('',#262,#391);+#391 = DEFINITIONAL_REPRESENTATION('',(#392),#396);+#392 = LINE('',#393,#394);+#393 = CARTESIAN_POINT('',(0.,-2.969848480984E-02));+#394 = VECTOR('',#395,1.);+#395 = DIRECTION('',(-1.,0.));+#396 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#397 = ADVANCED_FACE('',(#398),#159,.T.);+#398 = FACE_BOUND('',#399,.T.);+#399 = EDGE_LOOP('',(#400,#401,#402,#403));+#400 = ORIENTED_EDGE('',*,*,#141,.F.);+#401 = ORIENTED_EDGE('',*,*,#305,.T.);+#402 = ORIENTED_EDGE('',*,*,#352,.T.);+#403 = ORIENTED_EDGE('',*,*,#404,.F.);+#404 = EDGE_CURVE('',#144,#353,#405,.T.);+#405 = SURFACE_CURVE('',#406,(#410,#417),.PCURVE_S1.);+#406 = LINE('',#407,#408);+#407 = CARTESIAN_POINT('',(0.68,-0.48,0.51425));+#408 = VECTOR('',#409,1.);+#409 = DIRECTION('',(0.,1.,0.));+#410 = PCURVE('',#159,#411);+#411 = DEFINITIONAL_REPRESENTATION('',(#412),#416);+#412 = LINE('',#413,#414);+#413 = CARTESIAN_POINT('',(0.308,0.));+#414 = VECTOR('',#415,1.);+#415 = DIRECTION('',(0.,-1.));+#416 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#417 = PCURVE('',#418,#423);+#418 = PLANE('',#419);+#419 = AXIS2_PLACEMENT_3D('',#420,#421,#422);+#420 = CARTESIAN_POINT('',(0.659,-0.48,0.53525));+#421 = DIRECTION('',(0.707106781187,0.,0.707106781187));+#422 = DIRECTION('',(0.,1.,0.));+#423 = DEFINITIONAL_REPRESENTATION('',(#424),#428);+#424 = LINE('',#425,#426);+#425 = CARTESIAN_POINT('',(0.,-2.969848480984E-02));+#426 = VECTOR('',#427,1.);+#427 = DIRECTION('',(1.,0.));+#428 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#429 = ADVANCED_FACE('',(#430),#207,.F.);+#430 = FACE_BOUND('',#431,.T.);+#431 = EDGE_LOOP('',(#432,#433,#434,#457));+#432 = ORIENTED_EDGE('',*,*,#222,.F.);+#433 = ORIENTED_EDGE('',*,*,#193,.T.);+#434 = ORIENTED_EDGE('',*,*,#435,.T.);+#435 = EDGE_CURVE('',#144,#436,#438,.T.);+#436 = VERTEX_POINT('',#437);+#437 = CARTESIAN_POINT('',(0.638,-0.438,0.55625));+#438 = SURFACE_CURVE('',#439,(#443,#450),.PCURVE_S1.);+#439 = LINE('',#440,#441);+#440 = CARTESIAN_POINT('',(0.439333333333,-0.239333333333,0.754916666667+ ));+#441 = VECTOR('',#442,1.);+#442 = DIRECTION('',(-0.57735026919,0.57735026919,0.57735026919));+#443 = PCURVE('',#207,#444);+#444 = DEFINITIONAL_REPRESENTATION('',(#445),#449);+#445 = LINE('',#446,#447);+#446 = CARTESIAN_POINT('',(-1.119333333333,0.310655579202));+#447 = VECTOR('',#448,1.);+#448 = DIRECTION('',(0.57735026919,0.816496580928));+#449 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#450 = PCURVE('',#418,#451);+#451 = DEFINITIONAL_REPRESENTATION('',(#452),#456);+#452 = LINE('',#453,#454);+#453 = CARTESIAN_POINT('',(0.240666666667,0.310655579202));+#454 = VECTOR('',#455,1.);+#455 = DIRECTION('',(0.57735026919,0.816496580928));+#456 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#457 = ORIENTED_EDGE('',*,*,#458,.F.);+#458 = EDGE_CURVE('',#223,#436,#459,.T.);+#459 = SURFACE_CURVE('',#460,(#464,#471),.PCURVE_S1.);+#460 = LINE('',#461,#462);+#461 = CARTESIAN_POINT('',(-0.68,-0.438,0.55625));+#462 = VECTOR('',#463,1.);+#463 = DIRECTION('',(1.,0.,0.));+#464 = PCURVE('',#207,#465);+#465 = DEFINITIONAL_REPRESENTATION('',(#466),#470);+#466 = LINE('',#467,#468);+#467 = CARTESIAN_POINT('',(0.,2.969848480984E-02));+#468 = VECTOR('',#469,1.);+#469 = DIRECTION('',(-1.,0.));+#470 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#471 = PCURVE('',#288,#472);+#472 = DEFINITIONAL_REPRESENTATION('',(#473),#477);+#473 = LINE('',#474,#475);+#474 = CARTESIAN_POINT('',(0.,4.2E-02));+#475 = VECTOR('',#476,1.);+#476 = DIRECTION('',(1.,0.));+#477 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#478 = ADVANCED_FACE('',(#479,#527),#288,.T.);+#479 = FACE_BOUND('',#480,.T.);+#480 = EDGE_LOOP('',(#481,#482,#483,#506));+#481 = ORIENTED_EDGE('',*,*,#274,.F.);+#482 = ORIENTED_EDGE('',*,*,#458,.T.);+#483 = ORIENTED_EDGE('',*,*,#484,.T.);+#484 = EDGE_CURVE('',#436,#485,#487,.T.);+#485 = VERTEX_POINT('',#486);+#486 = CARTESIAN_POINT('',(0.638,0.438,0.55625));+#487 = SURFACE_CURVE('',#488,(#492,#499),.PCURVE_S1.);+#488 = LINE('',#489,#490);+#489 = CARTESIAN_POINT('',(0.638,-0.48,0.55625));+#490 = VECTOR('',#491,1.);+#491 = DIRECTION('',(0.,1.,0.));+#492 = PCURVE('',#288,#493);+#493 = DEFINITIONAL_REPRESENTATION('',(#494),#498);+#494 = LINE('',#495,#496);+#495 = CARTESIAN_POINT('',(1.318,0.));+#496 = VECTOR('',#497,1.);+#497 = DIRECTION('',(0.,1.));+#498 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#499 = PCURVE('',#418,#500);+#500 = DEFINITIONAL_REPRESENTATION('',(#501),#505);+#501 = LINE('',#502,#503);+#502 = CARTESIAN_POINT('',(0.,2.969848480984E-02));+#503 = VECTOR('',#504,1.);+#504 = DIRECTION('',(1.,0.));+#505 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#506 = ORIENTED_EDGE('',*,*,#507,.F.);+#507 = EDGE_CURVE('',#247,#485,#508,.T.);+#508 = SURFACE_CURVE('',#509,(#513,#520),.PCURVE_S1.);+#509 = LINE('',#510,#511);+#510 = CARTESIAN_POINT('',(-0.68,0.438,0.55625));+#511 = VECTOR('',#512,1.);+#512 = DIRECTION('',(1.,0.,0.));+#513 = PCURVE('',#288,#514);+#514 = DEFINITIONAL_REPRESENTATION('',(#515),#519);+#515 = LINE('',#516,#517);+#516 = CARTESIAN_POINT('',(0.,0.918));+#517 = VECTOR('',#518,1.);+#518 = DIRECTION('',(1.,0.));+#519 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#520 = PCURVE('',#262,#521);+#521 = DEFINITIONAL_REPRESENTATION('',(#522),#526);+#522 = LINE('',#523,#524);+#523 = CARTESIAN_POINT('',(0.,2.969848480984E-02));+#524 = VECTOR('',#525,1.);+#525 = DIRECTION('',(-1.,0.));+#526 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#527 = FACE_BOUND('',#528,.T.);+#528 = EDGE_LOOP('',(#529));+#529 = ORIENTED_EDGE('',*,*,#530,.T.);+#530 = EDGE_CURVE('',#531,#531,#533,.T.);+#531 = VERTEX_POINT('',#532);+#532 = CARTESIAN_POINT('',(-0.29,0.21,0.55625));+#533 = SURFACE_CURVE('',#534,(#539,#550),.PCURVE_S1.);+#534 = CIRCLE('',#535,0.12);+#535 = AXIS2_PLACEMENT_3D('',#536,#537,#538);+#536 = CARTESIAN_POINT('',(-0.41,0.21,0.55625));+#537 = DIRECTION('',(0.,0.,-1.));+#538 = DIRECTION('',(1.,0.,0.));+#539 = PCURVE('',#288,#540);+#540 = DEFINITIONAL_REPRESENTATION('',(#541),#549);+#541 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#542,#543,#544,#545,#546,#547+,#548),.UNSPECIFIED.,.T.,.F.) B_SPLINE_CURVE_WITH_KNOTS((1,2,2,2,2,1),(+ -2.094395102393,0.,2.094395102393,4.188790204786,6.28318530718,+8.377580409573),.UNSPECIFIED.) CURVE() GEOMETRIC_REPRESENTATION_ITEM() +RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,1.,0.5,1.)) REPRESENTATION_ITEM(+ '') );+#542 = CARTESIAN_POINT('',(0.39,0.69));+#543 = CARTESIAN_POINT('',(0.39,0.482153903092));+#544 = CARTESIAN_POINT('',(0.21,0.586076951546));+#545 = CARTESIAN_POINT('',(3.E-02,0.69));+#546 = CARTESIAN_POINT('',(0.21,0.793923048454));+#547 = CARTESIAN_POINT('',(0.39,0.897846096908));+#548 = CARTESIAN_POINT('',(0.39,0.69));+#549 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#550 = PCURVE('',#551,#556);+#551 = CYLINDRICAL_SURFACE('',#552,0.12);+#552 = AXIS2_PLACEMENT_3D('',#553,#554,#555);+#553 = CARTESIAN_POINT('',(-0.41,0.21,0.52125));+#554 = DIRECTION('',(-0.,-0.,-1.));+#555 = DIRECTION('',(1.,0.,0.));+#556 = DEFINITIONAL_REPRESENTATION('',(#557),#561);+#557 = LINE('',#558,#559);+#558 = CARTESIAN_POINT('',(-4.138911435803E-13,-3.5E-02));+#559 = VECTOR('',#560,1.);+#560 = DIRECTION('',(1.,-0.));+#561 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#562 = ADVANCED_FACE('',(#563),#262,.T.);+#563 = FACE_BOUND('',#564,.F.);+#564 = EDGE_LOOP('',(#565,#566,#567,#588));+#565 = ORIENTED_EDGE('',*,*,#246,.F.);+#566 = ORIENTED_EDGE('',*,*,#377,.T.);+#567 = ORIENTED_EDGE('',*,*,#568,.T.);+#568 = EDGE_CURVE('',#353,#485,#569,.T.);+#569 = SURFACE_CURVE('',#570,(#574,#581),.PCURVE_S1.);+#570 = LINE('',#571,#572);+#571 = CARTESIAN_POINT('',(0.279333333333,7.933333333333E-02,+ 0.914916666667));+#572 = VECTOR('',#573,1.);+#573 = DIRECTION('',(-0.57735026919,-0.57735026919,0.57735026919));+#574 = PCURVE('',#262,#575);+#575 = DEFINITIONAL_REPRESENTATION('',(#576),#580);+#576 = LINE('',#577,#578);+#577 = CARTESIAN_POINT('',(-0.959333333333,0.536929749181));+#578 = VECTOR('',#579,1.);+#579 = DIRECTION('',(0.57735026919,0.816496580928));+#580 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#581 = PCURVE('',#418,#582);+#582 = DEFINITIONAL_REPRESENTATION('',(#583),#587);+#583 = LINE('',#584,#585);+#584 = CARTESIAN_POINT('',(0.559333333333,0.536929749181));+#585 = VECTOR('',#586,1.);+#586 = DIRECTION('',(-0.57735026919,0.816496580928));+#587 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#588 = ORIENTED_EDGE('',*,*,#507,.F.);+#589 = ADVANCED_FACE('',(#590),#418,.T.);+#590 = FACE_BOUND('',#591,.T.);+#591 = EDGE_LOOP('',(#592,#593,#594,#595));+#592 = ORIENTED_EDGE('',*,*,#435,.F.);+#593 = ORIENTED_EDGE('',*,*,#404,.T.);+#594 = ORIENTED_EDGE('',*,*,#568,.T.);+#595 = ORIENTED_EDGE('',*,*,#484,.F.);+#596 = ADVANCED_FACE('',(#597),#551,.F.);+#597 = FACE_BOUND('',#598,.F.);+#598 = EDGE_LOOP('',(#599,#622,#623,#624));+#599 = ORIENTED_EDGE('',*,*,#600,.T.);+#600 = EDGE_CURVE('',#601,#531,#603,.T.);+#601 = VERTEX_POINT('',#602);+#602 = CARTESIAN_POINT('',(-0.29,0.21,0.52125));+#603 = SEAM_CURVE('',#604,(#608,#615),.PCURVE_S1.);+#604 = LINE('',#605,#606);+#605 = CARTESIAN_POINT('',(-0.29,0.21,0.52125));+#606 = VECTOR('',#607,1.);+#607 = DIRECTION('',(0.,0.,1.));+#608 = PCURVE('',#551,#609);+#609 = DEFINITIONAL_REPRESENTATION('',(#610),#614);+#610 = LINE('',#611,#612);+#611 = CARTESIAN_POINT('',(-4.138911435803E-13,0.));+#612 = VECTOR('',#613,1.);+#613 = DIRECTION('',(-0.,-1.));+#614 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#615 = PCURVE('',#551,#616);+#616 = DEFINITIONAL_REPRESENTATION('',(#617),#621);+#617 = LINE('',#618,#619);+#618 = CARTESIAN_POINT('',(6.28318530718,0.));+#619 = VECTOR('',#620,1.);+#620 = DIRECTION('',(-0.,-1.));+#621 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#622 = ORIENTED_EDGE('',*,*,#530,.T.);+#623 = ORIENTED_EDGE('',*,*,#600,.F.);+#624 = ORIENTED_EDGE('',*,*,#625,.T.);+#625 = EDGE_CURVE('',#601,#601,#626,.T.);+#626 = SURFACE_CURVE('',#627,(#632,#639),.PCURVE_S1.);+#627 = CIRCLE('',#628,0.12);+#628 = AXIS2_PLACEMENT_3D('',#629,#630,#631);+#629 = CARTESIAN_POINT('',(-0.41,0.21,0.52125));+#630 = DIRECTION('',(0.,0.,1.));+#631 = DIRECTION('',(1.,0.,0.));+#632 = PCURVE('',#551,#633);+#633 = DEFINITIONAL_REPRESENTATION('',(#634),#638);+#634 = LINE('',#635,#636);+#635 = CARTESIAN_POINT('',(6.28318530718,0.));+#636 = VECTOR('',#637,1.);+#637 = DIRECTION('',(-1.,0.));+#638 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#639 = PCURVE('',#640,#645);+#640 = PLANE('',#641);+#641 = AXIS2_PLACEMENT_3D('',#642,#643,#644);+#642 = CARTESIAN_POINT('',(-0.41,0.21,0.52125));+#643 = DIRECTION('',(0.,0.,1.));+#644 = DIRECTION('',(1.,0.,0.));+#645 = DEFINITIONAL_REPRESENTATION('',(#646),#650);+#646 = CIRCLE('',#647,0.12);+#647 = AXIS2_PLACEMENT_2D('',#648,#649);+#648 = CARTESIAN_POINT('',(0.,0.));+#649 = DIRECTION('',(1.,0.));+#650 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#651 = ADVANCED_FACE('',(#652),#640,.T.);+#652 = FACE_BOUND('',#653,.T.);+#653 = EDGE_LOOP('',(#654));+#654 = ORIENTED_EDGE('',*,*,#625,.T.);+#655 = MANIFOLD_SOLID_BREP('',#656);+#656 = CLOSED_SHELL('',(#657));+#657 = ADVANCED_FACE('',(#658),#662,.T.);+#658 = FACE_BOUND('',#659,.T.);+#659 = VERTEX_LOOP('',#660);+#660 = VERTEX_POINT('',#661);+#661 = CARTESIAN_POINT('',(-0.4,0.2,-3.4375E-02));+#662 = SPHERICAL_SURFACE('',#663,0.1375);+#663 = AXIS2_PLACEMENT_3D('',#664,#665,#666);+#664 = CARTESIAN_POINT('',(-0.4,0.2,0.103125));+#665 = DIRECTION('',(0.,0.,1.));+#666 = DIRECTION('',(1.,0.,0.));+#667 = MANIFOLD_SOLID_BREP('',#668);+#668 = CLOSED_SHELL('',(#669));+#669 = ADVANCED_FACE('',(#670),#674,.T.);+#670 = FACE_BOUND('',#671,.T.);+#671 = VERTEX_LOOP('',#672);+#672 = VERTEX_POINT('',#673);+#673 = CARTESIAN_POINT('',(-0.4,-0.2,-3.4375E-02));+#674 = SPHERICAL_SURFACE('',#675,0.1375);+#675 = AXIS2_PLACEMENT_3D('',#676,#677,#678);+#676 = CARTESIAN_POINT('',(-0.4,-0.2,0.103125));+#677 = DIRECTION('',(0.,0.,1.));+#678 = DIRECTION('',(1.,0.,0.));+#679 = MANIFOLD_SOLID_BREP('',#680);+#680 = CLOSED_SHELL('',(#681));+#681 = ADVANCED_FACE('',(#682),#686,.T.);+#682 = FACE_BOUND('',#683,.T.);+#683 = VERTEX_LOOP('',#684);+#684 = VERTEX_POINT('',#685);+#685 = CARTESIAN_POINT('',(8.419446744138E-18,0.2,-3.4375E-02));+#686 = SPHERICAL_SURFACE('',#687,0.1375);+#687 = AXIS2_PLACEMENT_3D('',#688,#689,#690);+#688 = CARTESIAN_POINT('',(0.,0.2,0.103125));+#689 = DIRECTION('',(0.,0.,1.));+#690 = DIRECTION('',(1.,0.,0.));+#691 = MANIFOLD_SOLID_BREP('',#692);+#692 = CLOSED_SHELL('',(#693));+#693 = ADVANCED_FACE('',(#694),#698,.T.);+#694 = FACE_BOUND('',#695,.T.);+#695 = VERTEX_LOOP('',#696);+#696 = VERTEX_POINT('',#697);+#697 = CARTESIAN_POINT('',(8.419446744138E-18,-0.2,-3.4375E-02));+#698 = SPHERICAL_SURFACE('',#699,0.1375);+#699 = AXIS2_PLACEMENT_3D('',#700,#701,#702);+#700 = CARTESIAN_POINT('',(0.,-0.2,0.103125));+#701 = DIRECTION('',(0.,0.,1.));+#702 = DIRECTION('',(1.,0.,0.));+#703 = MANIFOLD_SOLID_BREP('',#704);+#704 = CLOSED_SHELL('',(#705));+#705 = ADVANCED_FACE('',(#706),#710,.T.);+#706 = FACE_BOUND('',#707,.T.);+#707 = VERTEX_LOOP('',#708);+#708 = VERTEX_POINT('',#709);+#709 = CARTESIAN_POINT('',(0.4,0.2,-3.4375E-02));+#710 = SPHERICAL_SURFACE('',#711,0.1375);+#711 = AXIS2_PLACEMENT_3D('',#712,#713,#714);+#712 = CARTESIAN_POINT('',(0.4,0.2,0.103125));+#713 = DIRECTION('',(0.,0.,1.));+#714 = DIRECTION('',(1.,0.,0.));+#715 = MANIFOLD_SOLID_BREP('',#716);+#716 = CLOSED_SHELL('',(#717));+#717 = ADVANCED_FACE('',(#718),#722,.T.);+#718 = FACE_BOUND('',#719,.T.);+#719 = VERTEX_LOOP('',#720);+#720 = VERTEX_POINT('',#721);+#721 = CARTESIAN_POINT('',(0.4,-0.2,-3.4375E-02));+#722 = SPHERICAL_SURFACE('',#723,0.1375);+#723 = AXIS2_PLACEMENT_3D('',#724,#725,#726);+#724 = CARTESIAN_POINT('',(0.4,-0.2,0.103125));+#725 = DIRECTION('',(0.,0.,1.));+#726 = DIRECTION('',(1.,0.,0.));+#727 = MANIFOLD_SOLID_BREP('',#728);+#728 = CLOSED_SHELL('',(#729,#817,#821));+#729 = ADVANCED_FACE('',(#730),#743,.T.);+#730 = FACE_BOUND('',#731,.T.);+#731 = EDGE_LOOP('',(#732,#766,#789,#816));+#732 = ORIENTED_EDGE('',*,*,#733,.T.);+#733 = EDGE_CURVE('',#734,#734,#736,.T.);+#734 = VERTEX_POINT('',#735);+#735 = CARTESIAN_POINT('',(-0.29,0.21,0.52125));+#736 = SURFACE_CURVE('',#737,(#742,#754),.PCURVE_S1.);+#737 = CIRCLE('',#738,0.12);+#738 = AXIS2_PLACEMENT_3D('',#739,#740,#741);+#739 = CARTESIAN_POINT('',(-0.41,0.21,0.52125));+#740 = DIRECTION('',(0.,0.,1.));+#741 = DIRECTION('',(1.,0.,0.));+#742 = PCURVE('',#743,#748);+#743 = CYLINDRICAL_SURFACE('',#744,0.12);+#744 = AXIS2_PLACEMENT_3D('',#745,#746,#747);+#745 = CARTESIAN_POINT('',(-0.41,0.21,0.52125));+#746 = DIRECTION('',(-0.,-0.,-1.));+#747 = DIRECTION('',(1.,0.,0.));+#748 = DEFINITIONAL_REPRESENTATION('',(#749),#753);+#749 = LINE('',#750,#751);+#750 = CARTESIAN_POINT('',(6.28318530718,0.));+#751 = VECTOR('',#752,1.);+#752 = DIRECTION('',(-1.,0.));+#753 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#754 = PCURVE('',#755,#760);+#755 = PLANE('',#756);+#756 = AXIS2_PLACEMENT_3D('',#757,#758,#759);+#757 = CARTESIAN_POINT('',(-0.41,0.21,0.52125));+#758 = DIRECTION('',(0.,0.,1.));+#759 = DIRECTION('',(1.,0.,0.));+#760 = DEFINITIONAL_REPRESENTATION('',(#761),#765);+#761 = CIRCLE('',#762,0.12);+#762 = AXIS2_PLACEMENT_2D('',#763,#764);+#763 = CARTESIAN_POINT('',(0.,0.));+#764 = DIRECTION('',(1.,0.));+#765 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#766 = ORIENTED_EDGE('',*,*,#767,.T.);+#767 = EDGE_CURVE('',#734,#768,#770,.T.);+#768 = VERTEX_POINT('',#769);+#769 = CARTESIAN_POINT('',(-0.29,0.21,0.52625));+#770 = SEAM_CURVE('',#771,(#775,#782),.PCURVE_S1.);+#771 = LINE('',#772,#773);+#772 = CARTESIAN_POINT('',(-0.29,0.21,0.52125));+#773 = VECTOR('',#774,1.);+#774 = DIRECTION('',(0.,0.,1.));+#775 = PCURVE('',#743,#776);+#776 = DEFINITIONAL_REPRESENTATION('',(#777),#781);+#777 = LINE('',#778,#779);+#778 = CARTESIAN_POINT('',(-4.138911435803E-13,0.));+#779 = VECTOR('',#780,1.);+#780 = DIRECTION('',(-0.,-1.));+#781 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#782 = PCURVE('',#743,#783);+#783 = DEFINITIONAL_REPRESENTATION('',(#784),#788);+#784 = LINE('',#785,#786);+#785 = CARTESIAN_POINT('',(6.28318530718,0.));+#786 = VECTOR('',#787,1.);+#787 = DIRECTION('',(-0.,-1.));+#788 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#789 = ORIENTED_EDGE('',*,*,#790,.F.);+#790 = EDGE_CURVE('',#768,#768,#791,.T.);+#791 = SURFACE_CURVE('',#792,(#797,#804),.PCURVE_S1.);+#792 = CIRCLE('',#793,0.12);+#793 = AXIS2_PLACEMENT_3D('',#794,#795,#796);+#794 = CARTESIAN_POINT('',(-0.41,0.21,0.52625));+#795 = DIRECTION('',(0.,0.,1.));+#796 = DIRECTION('',(1.,0.,0.));+#797 = PCURVE('',#743,#798);+#798 = DEFINITIONAL_REPRESENTATION('',(#799),#803);+#799 = LINE('',#800,#801);+#800 = CARTESIAN_POINT('',(6.28318530718,-5.E-03));+#801 = VECTOR('',#802,1.);+#802 = DIRECTION('',(-1.,0.));+#803 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#804 = PCURVE('',#805,#810);+#805 = PLANE('',#806);+#806 = AXIS2_PLACEMENT_3D('',#807,#808,#809);+#807 = CARTESIAN_POINT('',(-0.41,0.21,0.52625));+#808 = DIRECTION('',(0.,0.,1.));+#809 = DIRECTION('',(1.,0.,0.));+#810 = DEFINITIONAL_REPRESENTATION('',(#811),#815);+#811 = CIRCLE('',#812,0.12);+#812 = AXIS2_PLACEMENT_2D('',#813,#814);+#813 = CARTESIAN_POINT('',(0.,0.));+#814 = DIRECTION('',(1.,0.));+#815 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#816 = ORIENTED_EDGE('',*,*,#767,.F.);+#817 = ADVANCED_FACE('',(#818),#755,.F.);+#818 = FACE_BOUND('',#819,.F.);+#819 = EDGE_LOOP('',(#820));+#820 = ORIENTED_EDGE('',*,*,#733,.T.);+#821 = ADVANCED_FACE('',(#822),#805,.T.);+#822 = FACE_BOUND('',#823,.T.);+#823 = EDGE_LOOP('',(#824));+#824 = ORIENTED_EDGE('',*,*,#790,.T.);+#825 = ( GEOMETRIC_REPRESENTATION_CONTEXT(3) +GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((#829)) GLOBAL_UNIT_ASSIGNED_CONTEXT+((#826,#827,#828)) REPRESENTATION_CONTEXT('Context #1',+ '3D Context with UNIT and UNCERTAINTY') );+#826 = ( LENGTH_UNIT() NAMED_UNIT(*) SI_UNIT(.MILLI.,.METRE.) );+#827 = ( NAMED_UNIT(*) PLANE_ANGLE_UNIT() SI_UNIT($,.RADIAN.) );+#828 = ( NAMED_UNIT(*) SI_UNIT($,.STERADIAN.) SOLID_ANGLE_UNIT() );+#829 = UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(1.E-07),#826,+ 'distance_accuracy_value','confusion accuracy');+#830 = PRODUCT_RELATED_PRODUCT_CATEGORY('part',$,(#7));+#831 = MECHANICAL_DESIGN_GEOMETRIC_PRESENTATION_REPRESENTATION('',(#832,+ #840,#847,#854,#861,#868,#875,#882,#889,#896,#903,#910,#917,#925,+ #932,#939,#946,#953,#960,#968,#975),#825);+#832 = STYLED_ITEM('color',(#833),#17);+#833 = PRESENTATION_STYLE_ASSIGNMENT((#834));+#834 = SURFACE_STYLE_USAGE(.BOTH.,#835);+#835 = SURFACE_SIDE_STYLE('',(#836));+#836 = SURFACE_STYLE_FILL_AREA(#837);+#837 = FILL_AREA_STYLE('',(#838));+#838 = FILL_AREA_STYLE_COLOUR('',#839);+#839 = COLOUR_RGB('',0.120000001395,0.120000001395,0.130000001093);+#840 = STYLED_ITEM('color',(#841),#137);+#841 = PRESENTATION_STYLE_ASSIGNMENT((#842));+#842 = SURFACE_STYLE_USAGE(.BOTH.,#843);+#843 = SURFACE_SIDE_STYLE('',(#844));+#844 = SURFACE_STYLE_FILL_AREA(#845);+#845 = FILL_AREA_STYLE('',(#846));+#846 = FILL_AREA_STYLE_COLOUR('',#839);+#847 = STYLED_ITEM('color',(#848),#218);+#848 = PRESENTATION_STYLE_ASSIGNMENT((#849));+#849 = SURFACE_STYLE_USAGE(.BOTH.,#850);+#850 = SURFACE_SIDE_STYLE('',(#851));+#851 = SURFACE_STYLE_FILL_AREA(#852);+#852 = FILL_AREA_STYLE('',(#853));+#853 = FILL_AREA_STYLE_COLOUR('',#839);+#854 = STYLED_ITEM('color',(#855),#299);+#855 = PRESENTATION_STYLE_ASSIGNMENT((#856));+#856 = SURFACE_STYLE_USAGE(.BOTH.,#857);+#857 = SURFACE_SIDE_STYLE('',(#858));+#858 = SURFACE_STYLE_FILL_AREA(#859);+#859 = FILL_AREA_STYLE('',(#860));+#860 = FILL_AREA_STYLE_COLOUR('',#839);+#861 = STYLED_ITEM('color',(#862),#348);+#862 = PRESENTATION_STYLE_ASSIGNMENT((#863));+#863 = SURFACE_STYLE_USAGE(.BOTH.,#864);+#864 = SURFACE_SIDE_STYLE('',(#865));+#865 = SURFACE_STYLE_FILL_AREA(#866);+#866 = FILL_AREA_STYLE('',(#867));+#867 = FILL_AREA_STYLE_COLOUR('',#839);+#868 = STYLED_ITEM('color',(#869),#397);+#869 = PRESENTATION_STYLE_ASSIGNMENT((#870));+#870 = SURFACE_STYLE_USAGE(.BOTH.,#871);+#871 = SURFACE_SIDE_STYLE('',(#872));+#872 = SURFACE_STYLE_FILL_AREA(#873);+#873 = FILL_AREA_STYLE('',(#874));+#874 = FILL_AREA_STYLE_COLOUR('',#839);+#875 = STYLED_ITEM('color',(#876),#429);+#876 = PRESENTATION_STYLE_ASSIGNMENT((#877));+#877 = SURFACE_STYLE_USAGE(.BOTH.,#878);+#878 = SURFACE_SIDE_STYLE('',(#879));+#879 = SURFACE_STYLE_FILL_AREA(#880);+#880 = FILL_AREA_STYLE('',(#881));+#881 = FILL_AREA_STYLE_COLOUR('',#839);+#882 = STYLED_ITEM('color',(#883),#478);+#883 = PRESENTATION_STYLE_ASSIGNMENT((#884));+#884 = SURFACE_STYLE_USAGE(.BOTH.,#885);+#885 = SURFACE_SIDE_STYLE('',(#886));+#886 = SURFACE_STYLE_FILL_AREA(#887);+#887 = FILL_AREA_STYLE('',(#888));+#888 = FILL_AREA_STYLE_COLOUR('',#839);+#889 = STYLED_ITEM('color',(#890),#562);+#890 = PRESENTATION_STYLE_ASSIGNMENT((#891));+#891 = SURFACE_STYLE_USAGE(.BOTH.,#892);+#892 = SURFACE_SIDE_STYLE('',(#893));+#893 = SURFACE_STYLE_FILL_AREA(#894);+#894 = FILL_AREA_STYLE('',(#895));+#895 = FILL_AREA_STYLE_COLOUR('',#839);+#896 = STYLED_ITEM('color',(#897),#589);+#897 = PRESENTATION_STYLE_ASSIGNMENT((#898));+#898 = SURFACE_STYLE_USAGE(.BOTH.,#899);+#899 = SURFACE_SIDE_STYLE('',(#900));+#900 = SURFACE_STYLE_FILL_AREA(#901);+#901 = FILL_AREA_STYLE('',(#902));+#902 = FILL_AREA_STYLE_COLOUR('',#839);+#903 = STYLED_ITEM('color',(#904),#596);+#904 = PRESENTATION_STYLE_ASSIGNMENT((#905));+#905 = SURFACE_STYLE_USAGE(.BOTH.,#906);+#906 = SURFACE_SIDE_STYLE('',(#907));+#907 = SURFACE_STYLE_FILL_AREA(#908);+#908 = FILL_AREA_STYLE('',(#909));+#909 = FILL_AREA_STYLE_COLOUR('',#839);+#910 = STYLED_ITEM('color',(#911),#651);+#911 = PRESENTATION_STYLE_ASSIGNMENT((#912));+#912 = SURFACE_STYLE_USAGE(.BOTH.,#913);+#913 = SURFACE_SIDE_STYLE('',(#914));+#914 = SURFACE_STYLE_FILL_AREA(#915);+#915 = FILL_AREA_STYLE('',(#916));+#916 = FILL_AREA_STYLE_COLOUR('',#839);+#917 = STYLED_ITEM('color',(#918),#657);+#918 = PRESENTATION_STYLE_ASSIGNMENT((#919));+#919 = SURFACE_STYLE_USAGE(.BOTH.,#920);+#920 = SURFACE_SIDE_STYLE('',(#921));+#921 = SURFACE_STYLE_FILL_AREA(#922);+#922 = FILL_AREA_STYLE('',(#923));+#923 = FILL_AREA_STYLE_COLOUR('',#924);+#924 = COLOUR_RGB('',0.78000000177,0.78000000177,0.760000013601);+#925 = STYLED_ITEM('color',(#926),#669);+#926 = PRESENTATION_STYLE_ASSIGNMENT((#927));+#927 = SURFACE_STYLE_USAGE(.BOTH.,#928);+#928 = SURFACE_SIDE_STYLE('',(#929));+#929 = SURFACE_STYLE_FILL_AREA(#930);+#930 = FILL_AREA_STYLE('',(#931));+#931 = FILL_AREA_STYLE_COLOUR('',#924);+#932 = STYLED_ITEM('color',(#933),#681);+#933 = PRESENTATION_STYLE_ASSIGNMENT((#934));+#934 = SURFACE_STYLE_USAGE(.BOTH.,#935);+#935 = SURFACE_SIDE_STYLE('',(#936));+#936 = SURFACE_STYLE_FILL_AREA(#937);+#937 = FILL_AREA_STYLE('',(#938));+#938 = FILL_AREA_STYLE_COLOUR('',#924);+#939 = STYLED_ITEM('color',(#940),#693);+#940 = PRESENTATION_STYLE_ASSIGNMENT((#941));+#941 = SURFACE_STYLE_USAGE(.BOTH.,#942);+#942 = SURFACE_SIDE_STYLE('',(#943));+#943 = SURFACE_STYLE_FILL_AREA(#944);+#944 = FILL_AREA_STYLE('',(#945));+#945 = FILL_AREA_STYLE_COLOUR('',#924);+#946 = STYLED_ITEM('color',(#947),#705);+#947 = PRESENTATION_STYLE_ASSIGNMENT((#948));+#948 = SURFACE_STYLE_USAGE(.BOTH.,#949);+#949 = SURFACE_SIDE_STYLE('',(#950));+#950 = SURFACE_STYLE_FILL_AREA(#951);+#951 = FILL_AREA_STYLE('',(#952));+#952 = FILL_AREA_STYLE_COLOUR('',#924);+#953 = STYLED_ITEM('color',(#954),#717);+#954 = PRESENTATION_STYLE_ASSIGNMENT((#955));+#955 = SURFACE_STYLE_USAGE(.BOTH.,#956);+#956 = SURFACE_SIDE_STYLE('',(#957));+#957 = SURFACE_STYLE_FILL_AREA(#958);+#958 = FILL_AREA_STYLE('',(#959));+#959 = FILL_AREA_STYLE_COLOUR('',#924);+#960 = STYLED_ITEM('color',(#961),#729);+#961 = PRESENTATION_STYLE_ASSIGNMENT((#962));+#962 = SURFACE_STYLE_USAGE(.BOTH.,#963);+#963 = SURFACE_SIDE_STYLE('',(#964));+#964 = SURFACE_STYLE_FILL_AREA(#965);+#965 = FILL_AREA_STYLE('',(#966));+#966 = FILL_AREA_STYLE_COLOUR('',#967);+#967 = COLOUR_RGB('',0.380000002513,0.380000002513,0.399999997426);+#968 = STYLED_ITEM('color',(#969),#817);+#969 = PRESENTATION_STYLE_ASSIGNMENT((#970));+#970 = SURFACE_STYLE_USAGE(.BOTH.,#971);+#971 = SURFACE_SIDE_STYLE('',(#972));+#972 = SURFACE_STYLE_FILL_AREA(#973);+#973 = FILL_AREA_STYLE('',(#974));+#974 = FILL_AREA_STYLE_COLOUR('',#967);+#975 = STYLED_ITEM('color',(#976),#821);+#976 = PRESENTATION_STYLE_ASSIGNMENT((#977));+#977 = SURFACE_STYLE_USAGE(.BOTH.,#978);+#978 = SURFACE_SIDE_STYLE('',(#979));+#979 = SURFACE_STYLE_FILL_AREA(#980);+#980 = FILL_AREA_STYLE('',(#981));+#981 = FILL_AREA_STYLE_COLOUR('',#967);+ENDSEC;+END-ISO-10303-21;
package.jsonadded+183@@ -0,0 +1,183 @@+{+ "slug": "mic94163ycs-tr",+ "version": "0.1.0",+ "type": "component",+ "description": "Microchip Tech Power Management Specialized - PMIC, WLCSP-6(1x1.5). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",+ "tags": [+ "component",+ "power supply chip",+ "mic94163ycs-tr",+ "factory-2.0.0",+ "extractor-text"+ ],+ "dependencies": {},+ "hero": {+ "type": "image",+ "path": "docs/hero.png"+ },+ "files": [+ "page.json",+ "README.md",+ "mic94163ycs-tr.kicad_sym",+ "mic94163ycs-tr.kicad_mod",+ "mic94163ycs-tr.glb",+ "mic94163ycs-tr.step",+ "mic94163ycs-tr.lbr",+ "docs/hero.png",+ "docs/mic94163ycs-tr-datasheet.pdf",+ "viewers/symbol.html",+ "viewers/footprint.html",+ "mic94163ycs-tr-hero.glb",+ "mic94163ycs-tr-hero.overlay.json",+ "mic94163ycs-tr-etched.glb"+ ],+ "component": {+ "mpn": "MIC94163YCS-TR",+ "manufacturer": "Microchip Tech",+ "package": "WLCSP-6(1x1.5)",+ "pin_count": 6,+ "category": "Power Supply Chip",+ "subcategory": "Power Management Specialized - PMIC",+ "datasheet": "https://datasheet.lcsc.com/datasheet/pdf/31cf840af2eff7c187c38d5a7be646b6.pdf",+ "parts": {+ "symbol": "mic94163ycs-tr.kicad_sym",+ "footprint": "mic94163ycs-tr.kicad_mod",+ "model_3d": "mic94163ycs-tr-hero.glb",+ "model_3d_plain": "mic94163ycs-tr-etched.glb",+ "model_3d_step": "mic94163ycs-tr-etched.step",+ "model_3d_step_plain": "mic94163ycs-tr.step",+ "lbr": "mic94163ycs-tr.lbr"+ },+ "distributor_links": {+ "lcsc": "C626249",+ "digikey": "576-4454-2-ND",+ "mouser": "998-MIC94163YCS-TR"+ },+ "distributor_check": {+ "checked_at": "2026-10-23T09:23:11Z",+ "source": "Component Ocean /api/assign-pns",+ "digikey": {+ "pn": "576-4454-2-ND",+ "status": "found",+ "lifecycle": "Active"+ },+ "mouser": {+ "pn": "998-MIC94163YCS-TR",+ "status": "found"+ }+ },+ "pins": [+ {+ "number": "A1",+ "name": "VOUT",+ "type": "power_out",+ "description": "Source of the N-channel MOSFET, the switched output; tied internally with B1."+ },+ {+ "number": "B1",+ "name": "VOUT",+ "type": "power_out",+ "description": "Source of the N-channel MOSFET, the switched output; tied internally with A1."+ },+ {+ "number": "C1",+ "name": "GND",+ "type": "power_in",+ "description": "Ground."+ },+ {+ "number": "A2",+ "name": "VIN",+ "type": "power_in",+ "description": "Input supply (drain of the N-channel MOSFET), operating range 1.7V to 5.5V; tied internally with B2."+ },+ {+ "number": "B2",+ "name": "VIN",+ "type": "power_in",+ "description": "Input supply (drain of the N-channel MOSFET), operating range 1.7V to 5.5V; tied internally with A2."+ },+ {+ "number": "C2",+ "name": "EN",+ "type": "input",+ "description": "Active-high enable input with internal 2 MΩ pull-down resistor; output is off if left floating, and the MIC94163 turns on above 1.2V (enable up to 5.5V, not limited by VIN)."+ }+ ],+ "provenance": {+ "extractor": "extract_pins 0.3",+ "factory_chain": {+ "factory": "2.0.0",+ "extractor": "extract_pins 0.3",+ "primary_model": "claude-sonnet-5-5",+ "primary_mode": "text",+ "consensus_model": "claude-sonnet-5-5",+ "consensus": "agreed",+ "guards": "pin_guards 0.1: passed",+ "guard_notes": [+ "extractor flagged: Pin-to-ball assignments come from Table 3-1 (page 10). The package top-view drawing on page 1 matche; The datasheet gives the EN threshold for MIC94162/3/4/5 as 1.2V min for logic high and 0.375V max fo"+ ],+ "pages_sent": 20,+ "cost_usd": 0.1388,+ "at": "2026-10-23T09:22:49"+ },+ "datasheet": {+ "url": "https://datasheet.lcsc.com/datasheet/pdf/31cf840af2eff7c187c38d5a7be646b6.pdf",+ "pages": 20,+ "sha256": "e4a0ce4adecf1ea3",+ "source_tier": "mfr"+ },+ "cad": "KiCad official (CC-BY-SA 4.0)",+ "pins": {+ "total": 6,+ "described": 6,+ "cites_pages": true,+ "refuses_to_fabricate": true+ }+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ },+ "models_3d": [+ {+ "file": "mic94163ycs-tr.step",+ "role": "plain",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 1.36,+ 0.96,+ 0.591+ ],+ "zmin_mm": -0.034,+ "centre_offset_mm": 0.0,+ "footprint_binding": "identity",+ "sha256": "f25685f2d812120b143e55891aafaec8241c811487074ee49b4f8850c63c92d7",+ "checked": "2026-10-23",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ },+ {+ "file": "mic94163ycs-tr-etched.step",+ "role": "eda",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 1.36,+ 0.96,+ 0.591+ ],+ "zmin_mm": -0.034,+ "centre_offset_mm": 0.0,+ "footprint_binding": "identity",+ "sha256": "cf63f5e008572c1f85a6dbbf8fd82e25e2e3e8f73a338fdca1bb1edf639290df",+ "checked": "2026-10-23",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ }+ ]+ }+}
page.jsonadded+189@@ -0,0 +1,189 @@+{+ "slug": "mic94163ycs-tr",+ "version": "0.1.0",+ "type": "component",+ "description": "Microchip Tech Power Management Specialized - PMIC, WLCSP-6(1x1.5). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",+ "tags": [+ "component",+ "power supply chip",+ "mic94163ycs-tr",+ "factory-2.0.0",+ "extractor-text"+ ],+ "dependencies": {},+ "hero": {+ "type": "image",+ "path": "docs/hero.png"+ },+ "files": [+ "page.json",+ "README.md",+ "mic94163ycs-tr.kicad_sym",+ "mic94163ycs-tr.kicad_mod",+ "mic94163ycs-tr.glb",+ "mic94163ycs-tr.step",+ "mic94163ycs-tr.lbr",+ "docs/hero.png",+ "docs/mic94163ycs-tr-datasheet.pdf",+ "viewers/symbol.html",+ "viewers/footprint.html",+ "mic94163ycs-tr-hero.glb",+ "mic94163ycs-tr-hero.overlay.json",+ "mic94163ycs-tr-etched.glb"+ ],+ "component": {+ "mpn": "MIC94163YCS-TR",+ "manufacturer": "Microchip Tech",+ "package": "WLCSP-6(1x1.5)",+ "pin_count": 6,+ "category": "Power Supply Chip",+ "subcategory": "Power Management Specialized - PMIC",+ "datasheet": "https://datasheet.lcsc.com/datasheet/pdf/31cf840af2eff7c187c38d5a7be646b6.pdf",+ "parts": {+ "symbol": "mic94163ycs-tr.kicad_sym",+ "footprint": "mic94163ycs-tr.kicad_mod",+ "model_3d": "mic94163ycs-tr-hero.glb",+ "model_3d_plain": "mic94163ycs-tr-etched.glb",+ "model_3d_step": "mic94163ycs-tr-etched.step",+ "model_3d_step_plain": "mic94163ycs-tr.step",+ "lbr": "mic94163ycs-tr.lbr"+ },+ "distributor_links": {+ "lcsc": "C626249",+ "digikey": "576-4454-2-ND",+ "mouser": "998-MIC94163YCS-TR"+ },+ "distributor_check": {+ "checked_at": "2026-10-23T09:23:11Z",+ "source": "Component Ocean /api/assign-pns",+ "digikey": {+ "pn": "576-4454-2-ND",+ "status": "found",+ "lifecycle": "Active"+ },+ "mouser": {+ "pn": "998-MIC94163YCS-TR",+ "status": "found"+ }+ },+ "pins": [+ {+ "number": "A1",+ "name": "VOUT",+ "type": "power_out",+ "description": "Source of the N-channel MOSFET, the switched output; tied internally with B1."+ },+ {+ "number": "B1",+ "name": "VOUT",+ "type": "power_out",+ "description": "Source of the N-channel MOSFET, the switched output; tied internally with A1."+ },+ {+ "number": "C1",+ "name": "GND",+ "type": "power_in",+ "description": "Ground."+ },+ {+ "number": "A2",+ "name": "VIN",+ "type": "power_in",+ "description": "Input supply (drain of the N-channel MOSFET), operating range 1.7V to 5.5V; tied internally with B2."+ },+ {+ "number": "B2",+ "name": "VIN",+ "type": "power_in",+ "description": "Input supply (drain of the N-channel MOSFET), operating range 1.7V to 5.5V; tied internally with A2."+ },+ {+ "number": "C2",+ "name": "EN",+ "type": "input",+ "description": "Active-high enable input with internal 2 MΩ pull-down resistor; output is off if left floating, and the MIC94163 turns on above 1.2V (enable up to 5.5V, not limited by VIN)."+ }+ ],+ "provenance": {+ "extractor": "extract_pins 0.3",+ "factory_chain": {+ "factory": "2.0.0",+ "extractor": "extract_pins 0.3",+ "primary_model": "claude-sonnet-5-5",+ "primary_mode": "text",+ "consensus_model": "claude-sonnet-5-5",+ "consensus": "agreed",+ "guards": "pin_guards 0.1: passed",+ "guard_notes": [+ "extractor flagged: Pin-to-ball assignments come from Table 3-1 (page 10). The package top-view drawing on page 1 matche; The datasheet gives the EN threshold for MIC94162/3/4/5 as 1.2V min for logic high and 0.375V max fo"+ ],+ "pages_sent": 20,+ "cost_usd": 0.1388,+ "at": "2026-10-23T09:22:49"+ },+ "datasheet": {+ "url": "https://datasheet.lcsc.com/datasheet/pdf/31cf840af2eff7c187c38d5a7be646b6.pdf",+ "pages": 20,+ "sha256": "e4a0ce4adecf1ea3",+ "source_tier": "mfr"+ },+ "cad": "KiCad official (CC-BY-SA 4.0)",+ "pins": {+ "total": 6,+ "described": 6,+ "cites_pages": true,+ "refuses_to_fabricate": true+ }+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ },+ "models_3d": [+ {+ "file": "mic94163ycs-tr.step",+ "role": "plain",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 1.36,+ 0.96,+ 0.591+ ],+ "zmin_mm": -0.034,+ "centre_offset_mm": 0,+ "footprint_binding": "identity",+ "sha256": "f25685f2d812120b143e55891aafaec8241c811487074ee49b4f8850c63c92d7",+ "checked": "2026-10-23",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ },+ {+ "file": "mic94163ycs-tr-etched.step",+ "role": "eda",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 1.36,+ 0.96,+ 0.591+ ],+ "zmin_mm": -0.034,+ "centre_offset_mm": 0,+ "footprint_binding": "identity",+ "sha256": "cf63f5e008572c1f85a6dbbf8fd82e25e2e3e8f73a338fdca1bb1edf639290df",+ "checked": "2026-10-23",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ }+ ]+ },+ "visibility": "public",+ "org": "adom",+ "author": {+ "name": "Ray",+ "email": "[email protected]"+ }+}
viewers/footprint.htmladded+1@@ -0,0 +1 @@+<!doctype html><title>mic94163ycs-tr</title>
viewers/symbol.htmladded+1@@ -0,0 +1 @@+<!doctype html><title>mic94163ycs-tr</title>