← Commit history

mic803-29d4vc3-tr: restore the component block (pinout + model declarations) from this page's own README and symbol

Ray ·e6dd958385 · ·parent 452aee4
1 file changed +44−1
page.json+44−1
@@ -33,5 +33,48 @@   "author": {     "name": "Ray",     "email": "[email protected]"+  },+  "component": {+    "mpn": "MIC803-29D4VC3-TR",+    "manufacturer": "Microchip",+    "package": "SC-70-3",+    "pin_count": 3,+    "category": "Supervisor and Reset ICs",+    "parts": {+      "symbol": "mic803-29d4vc3-tr.kicad_sym",+      "footprint": "mic803-29d4vc3-tr.kicad_mod",+      "model_3d": "mic803-29d4vc3-tr-etched.glb",+      "model_3d_plain": "mic803-29d4vc3-tr.glb",+      "model_3d_step": "mic803-29d4vc3-tr-etched.step",+      "model_3d_step_plain": "mic803-29d4vc3-tr.step",+      "lbr": "mic803-29d4vc3-tr.lbr"+    },+    "pins": [+      {+        "number": "1",+        "name": "GND",+        "type": "power_in",+        "description": "Device ground reference. Connect to system ground (0V)."+      },+      {+        "number": "2",+        "name": "/RESET",+        "type": "output",+        "description": "Active-low, open-drain reset output. Asserts low when VCC falls below the reset threshold VTH (2.93V nominal for the -29 option) and remains asserted for one reset timeout period (1120 ms min for the D4 option) after VCC rises back above VTH. Requires an external pull-up resistor (typ. 100 kΩ) to VCC or another supply ≤5.5V. Guaranteed valid with VCC as low as 1.0V. VOL ≤ 0.4V at ISINK = 3.2 mA (VCC ≥ 4.0V); VOL ≤ 0.3V at ISINK = 1.2 mA (VCC ≥ 2.5V); leakage ≤1 µA when deasserted. Max output current 20 mA."+      },+      {+        "number": "3",+        "name": "VCC",+        "type": "power_in",+        "description": "Power supply input and monitored voltage. Operating range +1.0V to +5.5V (absolute max +6.0V). Typical supply current 4.5 µA at 3.6V. A 0.1 µF bypass capacitor close to this pin is recommended for additional transient immunity."+      }+    ],+    "provenance": {+      "rebuilt": "component block rebuilt 2026-10-05 from this page's own README pinout table and .kicad_sym (pins cross-checked), no re-extraction"+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    }   }-}\ No newline at end of file+}