component
MIC5528-3.3YMT-TR
Public Made by Adomby adom
Microchip Tech Voltage Regulators - Linear, Low Drop Out (LDO) Regulators, TDFN-6-EP(1.2x1.2). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
← Commit history
Publish 0.1.0
15 files changed
+3031
README.md+76docs/hero.pngdocs/mic5528-3-3ymt-tr-datasheet.pdfmic5528-3-3ymt-tr-etched.glbmic5528-3-3ymt-tr-hero.glbmic5528-3-3ymt-tr-hero.overlay.json+238mic5528-3-3ymt-tr.glbmic5528-3-3ymt-tr.kicad_mod+173mic5528-3-3ymt-tr.kicad_sym+41mic5528-3-3ymt-tr.lbr+123mic5528-3-3ymt-tr.step+1992package.json+190page.json+196viewers/footprint.html+1viewers/symbol.html+1README.mdadded+76@@ -0,0 +1,76 @@+# MIC5528-3.3YMT-TR++**Microchip Tech** · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · TDFN-6-EP(1.2x1.2)++MIC5528-3.3YMT-TR from Microchip Tech, in a TDFN-6-EP(1.2x1.2). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | VOUT | power_out | Regulated output voltage; when the regulator is disabled, an internal 25 Ω load is switched in to discharge the external capacitors. |+| 2 | VOUT | power_out | Regulated output voltage (second output pin, internally tied to pin 1); when the regulator is disabled, an internal 25 Ω load is switched in to discharge the external capacitors. |+| 3 | GND | power_in | Ground reference for the regulator. |+| 4 | EN | input | Active-high enable: high turns the output on and low turns it off; the internal pull-down means the pin can be left floating, and the enable voltage operating range is 0 V to VIN. |+| 5 | NC | unconnected | No connection. |+| 6 | VIN | power_in | Supply input; operating range is +2.5 V to +5.5 V, with an absolute maximum of -0.3 V to +6 V. |+| 7 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Microchip Tech |+| Package | TDFN-6-EP(1.2x1.2) |+| Category | Power Management (PMIC) |+| Pins | 7 |++## Electrical characteristics++Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).++| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |+|---|---|---|---|---|---|---|---|+| Output Voltage Accuracy (variation from nominal VOUT, TJ = +25°C) | | -2 | 1 | 2 | % | Variation from nominal VOUT | 3 |+| Output Voltage Accuracy (variation from nominal VOUT, -40°C to +85°C) | | -3 | | 3 | % | Variation from nominal VOUT; -40°C to +85°C | 3 |+| Line Regulation | | | 0.02 | 0.3 | %/V | VIN = VOUT + 1V to 5.5V; IOUT = 100 µA | 3 |+| Load Regulation | | | 14 | 65 | mV | IOUT = 100 µA to 500 mA | 3 |+| Dropout Voltage | VDO | | 80 | 180 | mV | IOUT = 150 mA | 3 |+| Dropout Voltage | VDO | | 260 | 500 | mV | IOUT = 500 mA | 3 |+| Ground Pin Current (quiescent) | IGND | | 38 | 55 | µA | IOUT = 0 mA | 3 |+| Ground Pin Current (quiescent) | IGND | | 42 | 65 | µA | IOUT = 500 mA | 3 |+| Ground Pin Current in Shutdown | ISHDN | | 0.05 | 1 | µA | VEN = 0V | 3 |+| Current Limit | ILIM | 525 | 800 | | mA | VOUT = 0V | 3 |+| Output Voltage Noise | | | | 175 | µVRMS | f = 10 Hz to 100 kHz | 3 |+| Auto-Discharge NFET Resistance | | | | 25 | Ω | VEN = 0V; VIN = 3.6V; IOUT = -3 mA | 3 |+| Enable Input Voltage (logic low) | VEN | | | 0.2 | V | Logic low | 3 |+| Enable Input Voltage (logic high) | VEN | 1.2 | | | V | Logic high | 3 |+| Enable Input Current | IEN | | 0.01 | 1 | µA | VEN = 0V | 4 |+| Enable Input Current | IEN | | 1.4 | 2 | µA | VEN = 5.5V | 4 |+| Turn-On Time | tON | | 50 | 125 | µs | IOUT = 150 mA | 4 |+| Supply Voltage (VIN) operating range | VIN | 2.5 | | 5.5 | V | | 3 |+| Enable Voltage (VEN) operating range | VEN | 0 | | | V | Maximum is VIN | 3 |+| Supply Voltage (VIN) absolute maximum | VIN | -0.3 | | 6 | V | | 3 |+| Enable Voltage (VEN) absolute maximum | VEN | -0.3 | | | V | Maximum is VIN | 3 |+| ESD Rating (Human Body Model) | | | | 3 | kV | Human body model, 1.5 kΩ in series with 100 pF | 3 |+| Storage Temperature Range | TS | -65 | | 150 | °C | | 5 |+| Maximum Junction Temperature Range | TJ | -40 | | 150 | °C | | 5 |+| Junction Operating Temperature Range | TJ | -40 | | 125 | °C | | 5 |+| Lead Temperature | | | | 260 | °C | Soldering, 10s | 5 |++## CAD (KiCad official)++- Symbol: `MIC5528-3.3YMT-TR`+- Footprint: `Package_DFN_QFN:DFN-6-1EP_1.2x1.2mm_P0.4mm_EP0.3x0.94mm_PullBack`+- 3D model: TDFN-6-EP(1.2x1.2) (KiCad packages3D, STEP)+- 3D model files: `mic5528-3-3ymt-tr-etched.step` / `mic5528-3-3ymt-tr-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `mic5528-3-3ymt-tr.step` / `mic5528-3-3ymt-tr.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Microchip Tech datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588940941323882496) (24 pp, sha256 `4f56b145d23b9985`, retrieved 2026-10-19, tier: lcsc)+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/mic5528-3-3ymt-tr-datasheet.pdf)
docs/hero.pngadded⋯ 1 unchanged line ⋯
docs/mic5528-3-3ymt-tr-datasheet.pdfadded⋯ 1 unchanged line ⋯
mic5528-3-3ymt-tr-etched.glbadded⋯ 1 unchanged line ⋯
mic5528-3-3ymt-tr-hero.glbadded⋯ 1 unchanged line ⋯
mic5528-3-3ymt-tr-hero.overlay.jsonadded+238@@ -0,0 +1,238 @@+{+ "spec": "adom-hero 1.4",+ "mpn": "MIC5528-3.3YMT-TR",+ "kind": "component + footprint reference art",+ "board_use": false,+ "plane_z_mm": -0.02,+ "units": "metre",+ "upAxis": "Z",+ "layers": {+ "pad_outlines": {+ "material": "Footprint pads - teal dashed outlines - 50 percent opacity",+ "rgba": [+ 0.0,+ 0.902,+ 0.863,+ 0.5+ ],+ "pads": 7,+ "span_mm": 1.74,+ "dash_mm": 0.12,+ "gap_mm": 0.072,+ "pad_stroke_mm": 0.03+ },+ "silkscreen": {+ "material": "Silkscreen reference lines - 30 percent opacity",+ "rgba": [+ 0.92,+ 0.96,+ 1.0,+ 0.3+ ],+ "footprint_items": 3,+ "pin1": {+ "source": "footprint silkscreen",+ "pad": "1"+ }+ },+ "signal_names": {+ "material": "Signal names - 50 percent opacity",+ "rgba": [+ 0.92,+ 0.96,+ 1.0,+ 0.5+ ],+ "font": "DejaVu Sans Mono",+ "labels": 7,+ "sides": "top + mirrored underside (single-sided)",+ "fallback_to_pad_number": 0+ }+ },+ "align": {+ "ok": true,+ "centre_offset_mm": 0.0,+ "tolerance_mm": 0.25,+ "orientation_flipped": false,+ "contacts_bbox_mm": [+ -0.6,+ 0.6,+ -0.47,+ 0.47+ ],+ "pads_bbox_mm": [+ -0.6,+ 0.6,+ -0.55,+ 0.55+ ],+ "seating_z_mm": 0.0+ },+ "sources": {+ "glb": "mic5528-3-3ymt-tr-etched.glb",+ "glb_sha256": "97d2e70d002f38de556be4497f80958d6adef4a481c2d411c60258a40822616d",+ "footprint": "mic5528-3-3ymt-tr.kicad_mod",+ "footprint_sha256": "aefc251083f7acb94fe79068925dfb73c502240c459d8d56c2558c4d20eb9faf",+ "pins": "page.json component.pins",+ "pins_sha256": "72d63cb5e46a66601babe4ea1566a94a18c50d542ee220c99adeaf6a0c1274e9"+ },+ "generator": "adom-wiki 1.7.74 (component_hero)",+ "labels": [+ {+ "pad": "1",+ "text": "VOUT",+ "x": -0.7,+ "y": -0.4,+ "align": "right",+ "vertical": false,+ "h": 0.2+ },+ {+ "pad": "2",+ "text": "VOUT",+ "x": -0.7,+ "y": 0.0,+ "align": "right",+ "vertical": false,+ "h": 0.2+ },+ {+ "pad": "3",+ "text": "GND",+ "x": -0.7,+ "y": 0.4,+ "align": "right",+ "vertical": false,+ "h": 0.2+ },+ {+ "pad": "4",+ "text": "EN",+ "x": 0.7,+ "y": 0.4,+ "align": "left",+ "vertical": false,+ "h": 0.2+ },+ {+ "pad": "5",+ "text": "NC",+ "x": 0.7,+ "y": 0.0,+ "align": "left",+ "vertical": false,+ "h": 0.2+ },+ {+ "pad": "6",+ "text": "VIN",+ "x": 0.7,+ "y": -0.4,+ "align": "left",+ "vertical": false,+ "h": 0.2+ },+ {+ "pad": "7",+ "text": "EP",+ "x": 0.3,+ "y": 0.0,+ "align": "left",+ "vertical": false,+ "h": 0.6+ }+ ],+ "pads": [+ {+ "number": "1",+ "shape": "roundrect",+ "center_mm": [+ -0.475,+ -0.4+ ],+ "size_mm": [+ 0.25,+ 0.3+ ],+ "rot": 0.0+ },+ {+ "number": "2",+ "shape": "roundrect",+ "center_mm": [+ -0.475,+ 0.0+ ],+ "size_mm": [+ 0.25,+ 0.3+ ],+ "rot": 0.0+ },+ {+ "number": "3",+ "shape": "roundrect",+ "center_mm": [+ -0.475,+ 0.4+ ],+ "size_mm": [+ 0.25,+ 0.3+ ],+ "rot": 0.0+ },+ {+ "number": "4",+ "shape": "roundrect",+ "center_mm": [+ 0.475,+ 0.4+ ],+ "size_mm": [+ 0.25,+ 0.3+ ],+ "rot": 0.0+ },+ {+ "number": "5",+ "shape": "roundrect",+ "center_mm": [+ 0.475,+ 0.0+ ],+ "size_mm": [+ 0.25,+ 0.3+ ],+ "rot": 0.0+ },+ {+ "number": "6",+ "shape": "roundrect",+ "center_mm": [+ 0.475,+ -0.4+ ],+ "size_mm": [+ 0.25,+ 0.3+ ],+ "rot": 0.0+ },+ {+ "number": "7",+ "shape": "rect",+ "center_mm": [+ 0.0,+ 0.0+ ],+ "size_mm": [+ 0.3,+ 0.94+ ],+ "rot": 0.0+ }+ ]+}
mic5528-3-3ymt-tr.glbadded⋯ 1 unchanged line ⋯
mic5528-3-3ymt-tr.kicad_modadded+173@@ -0,0 +1,173 @@+(footprint "DFN-6-1EP_1.2x1.2mm_P0.4mm_EP0.3x0.94mm_PullBack"+ (version 20260206)+ (generator "kicad-footprint-generator")+ (layer "F.Cu")+ (descr "DFN, 6 Pin (http://www.onsemi.com/pub/Collateral/NCP133-D.PDF)")+ (tags "DFN NoLead")+ (property "Reference" "REF**"+ (at 0 -1.55 0)+ (layer "F.SilkS")+ (effects+ (font+ (size 1 1)+ (thickness 0.15)+ )+ )+ )+ (property "Value" "DFN-6-1EP_1.2x1.2mm_P0.4mm_EP0.3x0.94mm_PullBack"+ (at 0 1.55 0)+ (layer "F.Fab")+ (effects+ (font+ (size 1 1)+ (thickness 0.15)+ )+ )+ )+ (property "KiLib_Generator" "package/no_lead"+ (at 0 0 0)+ (layer "F.SilkS")+ (hide yes)+ (effects+ (font+ (size 1 1)+ (thickness 0.15)+ )+ )+ )+ (attr smd)+ (duplicate_pad_numbers_are_jumpers no)+ (fp_line+ (start -0.53 -0.81)+ (end 0.71 -0.81)+ (stroke+ (width 0.12)+ (type solid)+ )+ (layer "F.SilkS")+ )+ (fp_line+ (start 0.71 0.81)+ (end -0.71 0.81)+ (stroke+ (width 0.12)+ (type solid)+ )+ (layer "F.SilkS")+ )+ (fp_poly+ (pts+ (xy -0.77 -0.72)+ (xy -1.05 -0.72)+ (xy -0.77 -1)+ )+ (stroke+ (width 0.12)+ (type solid)+ )+ (fill yes)+ (layer "F.SilkS")+ )+ (fp_rect+ (start -0.85 -0.85)+ (end 0.85 0.85)+ (stroke+ (width 0.05)+ (type solid)+ )+ (fill no)+ (layer "F.CrtYd")+ )+ (fp_poly+ (pts+ (xy -0.3 -0.6)+ (xy 0.6 -0.6)+ (xy 0.6 0.6)+ (xy -0.6 0.6)+ (xy -0.6 -0.3)+ )+ (stroke+ (width 0.1)+ (type solid)+ )+ (fill no)+ (layer "F.Fab")+ )+ (fp_text user "${REFERENCE}"+ (at 0 0 0)+ (layer "F.Fab")+ (effects+ (font+ (size 0.3 0.3)+ (thickness 0.04)+ )+ )+ )+ (pad "" smd roundrect+ (at 0 -0.235)+ (size 0.24 0.38)+ (layers "F.Paste")+ (roundrect_rratio 0.25)+ )+ (pad "" smd roundrect+ (at 0 0.235)+ (size 0.24 0.38)+ (layers "F.Paste")+ (roundrect_rratio 0.25)+ )+ (pad "1" smd roundrect+ (at -0.475 -0.4)+ (size 0.25 0.3)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (roundrect_rratio 0.25)+ )+ (pad "2" smd roundrect+ (at -0.475 0)+ (size 0.25 0.3)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (roundrect_rratio 0.25)+ )+ (pad "3" smd roundrect+ (at -0.475 0.4)+ (size 0.25 0.3)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (roundrect_rratio 0.25)+ )+ (pad "4" smd roundrect+ (at 0.475 0.4)+ (size 0.25 0.3)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (roundrect_rratio 0.25)+ )+ (pad "5" smd roundrect+ (at 0.475 0)+ (size 0.25 0.3)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (roundrect_rratio 0.25)+ )+ (pad "6" smd roundrect+ (at 0.475 -0.4)+ (size 0.25 0.3)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (roundrect_rratio 0.25)+ )+ (pad "7" smd rect+ (at 0 0)+ (size 0.3 0.94)+ (property pad_prop_heatsink)+ (layers "F.Cu" "F.Mask")+ (zone_connect 2)+ )+ (embedded_fonts no)+ (model "${KICAD10_3DMODEL_DIR}/Package_DFN_QFN.3dshapes/DFN-6-1EP_1.2x1.2mm_P0.4mm_EP0.3x0.94mm_PullBack.step"+ (offset+ (xyz 0 0 0)+ )+ (scale+ (xyz 1 1 1)+ )+ (rotate+ (xyz 0 0 0)+ )+ )+)
mic5528-3-3ymt-tr.kicad_symadded+41@@ -0,0 +1,41 @@+(kicad_symbol_lib (version 20211014) (generator ds2sf_rect)+ (symbol "MIC5528-3.3YMT-TR" (in_bom yes) (on_board yes)+ (property "Reference" "U" (at 0 7.62 0) (effects (font (size 1.27 1.27))))+ (property "Value" "MIC5528-3.3YMT-TR" (at 0 -10.16 0) (effects (font (size 1.27 1.27))))+ (property "Footprint" "" (at 0 0 0) (effects (font (size 1.27 1.27)) hide))+ (symbol "MIC5528-3.3YMT-TR_0_1"+ (rectangle (start -12.70 5.08) (end 12.70 -7.62)+ (stroke (width 0.254) (type default)) (fill (type background)))+ )+ (symbol "MIC5528-3.3YMT-TR_1_1"+ (pin power_out line (at -17.78 2.54 0) (length 5.08)+ (name "VOUT" (effects (font (size 1.27 1.27))))+ (number "1" (effects (font (size 1.27 1.27))))+ )+ (pin power_out line (at -17.78 0.00 0) (length 5.08)+ (name "VOUT" (effects (font (size 1.27 1.27))))+ (number "2" (effects (font (size 1.27 1.27))))+ )+ (pin power_in line (at -17.78 -2.54 0) (length 5.08)+ (name "GND" (effects (font (size 1.27 1.27))))+ (number "3" (effects (font (size 1.27 1.27))))+ )+ (pin input line (at -17.78 -5.08 0) (length 5.08)+ (name "EN" (effects (font (size 1.27 1.27))))+ (number "4" (effects (font (size 1.27 1.27))))+ )+ (pin passive line (at 17.78 2.54 180) (length 5.08)+ (name "EP" (effects (font (size 1.27 1.27))))+ (number "7" (effects (font (size 1.27 1.27))))+ )+ (pin power_in line (at 17.78 0.00 180) (length 5.08)+ (name "VIN" (effects (font (size 1.27 1.27))))+ (number "6" (effects (font (size 1.27 1.27))))+ )+ (pin no_connect line (at 17.78 -2.54 180) (length 5.08)+ (name "NC" (effects (font (size 1.27 1.27))))+ (number "5" (effects (font (size 1.27 1.27))))+ )+ )+ )+)
mic5528-3-3ymt-tr.lbradded+123@@ -0,0 +1,123 @@+<?xml version="1.0" encoding="utf-8"?>+<!DOCTYPE eagle SYSTEM "eagle.dtd">+<eagle version="9.6.2">+<drawing>+<settings><setting alwaysvectorfont="no"/></settings>+<grid distance="0.1" unitdist="inch" unit="inch" style="lines" multiple="1" display="no" altdistance="0.01" altunitdist="inch" altunit="inch"/>+<layers>+<layer number="1" name="Top" color="4" fill="1" visible="yes" active="yes"/>+<layer number="16" name="Bottom" color="1" fill="1" visible="yes" active="yes"/>+<layer number="17" name="Pads" color="2" fill="1" visible="yes" active="yes"/>+<layer number="18" name="Vias" color="2" fill="1" visible="yes" active="yes"/>+<layer number="19" name="Unrouted" color="6" fill="1" visible="yes" active="yes"/>+<layer number="20" name="Dimension" color="15" fill="1" visible="yes" active="yes"/>+<layer number="21" name="tPlace" color="7" fill="1" visible="yes" active="yes"/>+<layer number="22" name="bPlace" color="7" fill="1" visible="yes" active="yes"/>+<layer number="23" name="tOrigins" color="15" fill="1" visible="yes" active="yes"/>+<layer number="24" name="bOrigins" color="15" fill="1" visible="yes" active="yes"/>+<layer number="25" name="tNames" color="7" fill="1" visible="yes" active="yes"/>+<layer number="26" name="bNames" color="7" fill="1" visible="yes" active="yes"/>+<layer number="27" name="tValues" color="7" fill="1" visible="yes" active="yes"/>+<layer number="28" name="bValues" color="7" fill="1" visible="yes" active="yes"/>+<layer number="29" name="tStop" color="7" fill="3" visible="no" active="yes"/>+<layer number="30" name="bStop" color="7" fill="6" visible="no" active="yes"/>+<layer number="31" name="tCream" color="7" fill="4" visible="no" active="yes"/>+<layer number="32" name="bCream" color="7" fill="5" visible="no" active="yes"/>+<layer number="33" name="tFinish" color="6" fill="3" visible="no" active="yes"/>+<layer number="34" name="bFinish" color="6" fill="6" visible="no" active="yes"/>+<layer number="35" name="tGlue" color="7" fill="4" visible="no" active="yes"/>+<layer number="36" name="bGlue" color="7" fill="5" visible="no" active="yes"/>+<layer number="37" name="tTest" color="7" fill="1" visible="no" active="yes"/>+<layer number="38" name="bTest" color="7" fill="1" visible="no" active="yes"/>+<layer number="39" name="tKeepout" color="4" fill="11" visible="no" active="yes"/>+<layer number="40" name="bKeepout" color="1" fill="11" visible="no" active="yes"/>+<layer number="41" name="tRestrict" color="4" fill="10" visible="no" active="yes"/>+<layer number="42" name="bRestrict" color="1" fill="10" visible="no" active="yes"/>+<layer number="43" name="vRestrict" color="2" fill="10" visible="no" active="yes"/>+<layer number="44" name="Drills" color="7" fill="1" visible="no" active="yes"/>+<layer number="45" name="Holes" color="7" fill="1" visible="no" active="yes"/>+<layer number="46" name="Milling" color="3" fill="1" visible="no" active="yes"/>+<layer number="47" name="Measures" color="7" fill="1" visible="no" active="yes"/>+<layer number="48" name="Document" color="7" fill="1" visible="yes" active="yes"/>+<layer number="49" name="Reference" color="7" fill="1" visible="yes" active="yes"/>+<layer number="91" name="Nets" color="2" fill="1" visible="yes" active="yes"/>+<layer number="92" name="Busses" color="1" fill="1" visible="yes" active="yes"/>+<layer number="93" name="Pins" color="2" fill="1" visible="no" active="yes"/>+<layer number="94" name="Symbols" color="4" fill="1" visible="yes" active="yes"/>+<layer number="95" name="Names" color="7" fill="1" visible="yes" active="yes"/>+<layer number="96" name="Values" color="7" fill="1" visible="yes" active="yes"/>+<layer number="97" name="Info" color="7" fill="1" visible="yes" active="yes"/>+<layer number="98" name="Guide" color="6" fill="1" visible="yes" active="yes"/>+</layers>+<library>+<description></description>+<packages>+<package name="DFN-6-1EP_1.2x1.2mm_P0.4mm_EP0.3x0.94mm_PullBack">+ <description>DFN-6-1EP, 1.2 x 1.2 mm, 0.4 mm pitch</description>+ <smd name="1" x="-0.4750" y="0.4000" dx="0.2500" dy="0.3000" layer="1" roundness="50"/>+ <smd name="2" x="-0.4750" y="-0.0000" dx="0.2500" dy="0.3000" layer="1" roundness="50"/>+ <smd name="3" x="-0.4750" y="-0.4000" dx="0.2500" dy="0.3000" layer="1" roundness="50"/>+ <smd name="4" x="0.4750" y="-0.4000" dx="0.2500" dy="0.3000" layer="1" roundness="50"/>+ <smd name="5" x="0.4750" y="-0.0000" dx="0.2500" dy="0.3000" layer="1" roundness="50"/>+ <smd name="6" x="0.4750" y="0.4000" dx="0.2500" dy="0.3000" layer="1" roundness="50"/>+ <smd name="7" x="0.0000" y="-0.0000" dx="0.3000" dy="0.9400" layer="1" cream="no"/>+ <polygon width="0.1200" layer="21">+ <vertex x="-0.7700" y="0.7200"/>+ <vertex x="-1.0500" y="0.7200"/>+ <vertex x="-0.7700" y="1.0000"/>+ </polygon>+ <polygon width="0.1000" layer="51">+ <vertex x="-0.3000" y="0.6000"/>+ <vertex x="0.6000" y="0.6000"/>+ <vertex x="0.6000" y="-0.6000"/>+ <vertex x="-0.6000" y="-0.6000"/>+ <vertex x="-0.6000" y="0.3000"/>+ </polygon>+ <wire x1="-0.5300" y1="0.8100" x2="0.7100" y2="0.8100" width="0.1200" layer="21"/>+ <wire x1="0.7100" y1="-0.8100" x2="-0.7100" y2="-0.8100" width="0.1200" layer="21"/>+ <text x="0" y="1.410" size="1.27" layer="25" align="bottom-center">>NAME</text>+ <text x="0" y="-1.410" size="1.27" layer="27" align="top-center">>VALUE</text>+</package>+</packages>+<symbols>+<symbol name="MIC5528-3.3YMT-TR">+ <wire x1="-12.7" y1="5.08" x2="12.7" y2="5.08" width="0.254" layer="94"/>+ <wire x1="12.7" y1="5.08" x2="12.7" y2="-7.62" width="0.254" layer="94"/>+ <wire x1="12.7" y1="-7.62" x2="-12.7" y2="-7.62" width="0.254" layer="94"/>+ <wire x1="-12.7" y1="-7.62" x2="-12.7" y2="5.08" width="0.254" layer="94"/>+ <text x="0.0000" y="7.6200" size="1.27" layer="95" align="center">>NAME</text>+ <text x="0.0000" y="-10.1600" size="1.27" layer="96" align="center">>VALUE</text>+ <pin name="VOUT" x="-17.78" y="2.54" length="middle" direction="out"/>+ <pin name="VOUT@2" x="-17.78" y="0" length="middle" direction="out"/>+ <pin name="GND" x="-17.78" y="-2.54" length="middle" direction="pwr"/>+ <pin name="EN" x="-17.78" y="-5.08" length="middle" direction="in"/>+ <pin name="EP" x="17.78" y="2.54" length="middle" direction="pas" rot="R180"/>+ <pin name="VIN" x="17.78" y="0" length="middle" direction="pwr" rot="R180"/>+ <pin name="NC" x="17.78" y="-2.54" length="middle" direction="io" rot="R180"/>+</symbol>+</symbols>+<devicesets>+<deviceset name="MIC5528-3.3YMT-TR" prefix="U">+ <description></description>+ <gates>+ <gate name="G$1" symbol="MIC5528-3.3YMT-TR" x="0" y="0"/>+ </gates>+ <devices>+ <device name="" package="DFN-6-1EP_1.2x1.2mm_P0.4mm_EP0.3x0.94mm_PullBack">+ <connects>+ <connect gate="G$1" pin="VOUT" pad="1"/>+ <connect gate="G$1" pin="VOUT@2" pad="2"/>+ <connect gate="G$1" pin="GND" pad="3"/>+ <connect gate="G$1" pin="EN" pad="4"/>+ <connect gate="G$1" pin="EP" pad="7"/>+ <connect gate="G$1" pin="VIN" pad="6"/>+ <connect gate="G$1" pin="NC" pad="5"/>+ </connects>+ <technologies><technology name=""/></technologies>+ </device>+ </devices>+</deviceset>+</devicesets>+</library>+</drawing>+</eagle>
mic5528-3-3ymt-tr.stepadded+1992@@ -0,0 +1,1992 @@+ISO-10303-21; +HEADER; +/* DFN-6-1EP_1.2x1.2mm_P0.4mm_EP0.3x0.94mm_PullBack.step 3D STEP model for use in ECAD systems + * Copyright (C) 2018, kicad StepUp + * + * This work is licensed under the [Creative Commons CC-BY-SA 4.0 License](https://creativecommons.org/licenses/by-sa/4.0/legalcode), + * with the following exception: + * To the extent that the creation of electronic designs that use 'Licensed Material' can be considered to be 'Adapted Material', + * then the copyright holder waives article 3 of the license with respect to these designs and any generated files which use data provided + * as part of the 'Licensed Material'. + * You are free to use the library data in your own projects without the obligation to share your project files under this or any other license agreement. + * However, if you wish to redistribute these libraries, or parts thereof (including in modified form) as a collection then the exception above does not apply. + * Please refer to https://github.com/KiCad/kicad-packages3D/blob/master/LICENSE.md for further clarification of the exception. + * Disclaimer of Warranties and Limitation of Liability. + * These libraries are provided in the hope that they will be useful, but are provided without warranty of any kind, express or implied. + * *USE 3D CAD DATA AT YOUR OWN RISK* + * *DO NOT RELY UPON ANY INFORMATION FOUND HERE WITHOUT INDEPENDENT VERIFICATION.* + * + */ + +FILE_DESCRIPTION( +/* description */ ('model of DFN-6-1EP_1.2x1.2mm_P0.4mm_EP0.3x0.94mm_PullBack'), +/* implementation_level */ '2;1'); + +FILE_NAME( +/* name */ 'DFN-6-1EP_1.2x1.2mm_P0.4mm_EP0.3x0.94mm_PullBack.step', +/* time_stamp */ '2018-11-02T17:59:18', +/* author */ ('kicad StepUp','ksu'), +/* organization */ ('FreeCAD'), +/* preprocessor_version */ 'OCC', +/* originating_system */ 'kicad StepUp', +/* authorisation */ ''); + +FILE_SCHEMA(('AUTOMOTIVE_DESIGN { 1 0 10303 214 1 1 1 1 }')); +ENDSEC; + +DATA; +#1 = APPLICATION_PROTOCOL_DEFINITION('international standard', +'automotive_design',2000,#2); +#2 = APPLICATION_CONTEXT( +'core data for automotive mechanical design processes'); +#3 = SHAPE_DEFINITION_REPRESENTATION(#4,#10); +#4 = PRODUCT_DEFINITION_SHAPE('','',#5); +#5 = PRODUCT_DEFINITION('design','',#6,#9); +#6 = PRODUCT_DEFINITION_FORMATION('','',#7); +#7 = PRODUCT('DFN_6_1EP_12x12mm_P04mm_EP03x094mm_PullBack', +'DFN_6_1EP_12x12mm_P04mm_EP03x094mm_PullBack','',(#8)); +#8 = PRODUCT_CONTEXT('',#2,'mechanical'); +#9 = PRODUCT_DEFINITION_CONTEXT('part definition',#2,'design'); +#10 = ADVANCED_BREP_SHAPE_REPRESENTATION('',(#11,#15),#1573); +#11 = AXIS2_PLACEMENT_3D('',#12,#13,#14); +#12 = CARTESIAN_POINT('',(0.E+000,0.E+000,0.E+000)); +#13 = DIRECTION('',(0.E+000,0.E+000,1.)); +#14 = DIRECTION('',(1.,0.E+000,-0.E+000)); +#15 = MANIFOLD_SOLID_BREP('',#16); +#16 = CLOSED_SHELL('',(#17,#65,#96,#120,#144,#168,#185,#424,#524,#548, +#588,#681,#705,#745,#778,#802,#835,#875,#899,#939,#972,#996,#1029, +#1069,#1093,#1133,#1166,#1190,#1223,#1240,#1263,#1280,#1297,#1314, +#1331,#1343,#1360,#1377,#1394,#1411,#1423,#1440,#1452,#1469,#1481, +#1498,#1510,#1527,#1539,#1564)); +#17 = ADVANCED_FACE('',(#18),#60,.F.); +#18 = FACE_BOUND('',#19,.F.); +#19 = EDGE_LOOP('',(#20,#30,#38,#46,#54)); +#20 = ORIENTED_EDGE('',*,*,#21,.T.); +#21 = EDGE_CURVE('',#22,#24,#26,.T.); +#22 = VERTEX_POINT('',#23); +#23 = CARTESIAN_POINT('',(-0.15,0.27,0.E+000)); +#24 = VERTEX_POINT('',#25); +#25 = CARTESIAN_POINT('',(-0.15,-0.47,0.E+000)); +#26 = LINE('',#27,#28); +#27 = CARTESIAN_POINT('',(-0.15,0.27,0.E+000)); +#28 = VECTOR('',#29,1.); +#29 = DIRECTION('',(-2.22044604925E-016,-1.,0.E+000)); +#30 = ORIENTED_EDGE('',*,*,#31,.T.); +#31 = EDGE_CURVE('',#24,#32,#34,.T.); +#32 = VERTEX_POINT('',#33); +#33 = CARTESIAN_POINT('',(0.15,-0.47,0.E+000)); +#34 = LINE('',#35,#36); +#35 = CARTESIAN_POINT('',(-0.15,-0.47,0.E+000)); +#36 = VECTOR('',#37,1.); +#37 = DIRECTION('',(1.,-3.700743415417E-017,0.E+000)); +#38 = ORIENTED_EDGE('',*,*,#39,.T.); +#39 = EDGE_CURVE('',#32,#40,#42,.T.); +#40 = VERTEX_POINT('',#41); +#41 = CARTESIAN_POINT('',(0.15,0.47,0.E+000)); +#42 = LINE('',#43,#44); +#43 = CARTESIAN_POINT('',(0.15,-0.47,0.E+000)); +#44 = VECTOR('',#45,1.); +#45 = DIRECTION('',(2.22044604925E-016,1.,0.E+000)); +#46 = ORIENTED_EDGE('',*,*,#47,.T.); +#47 = EDGE_CURVE('',#40,#48,#50,.T.); +#48 = VERTEX_POINT('',#49); +#49 = CARTESIAN_POINT('',(5.E-002,0.47,0.E+000)); +#50 = LINE('',#51,#52); +#51 = CARTESIAN_POINT('',(0.15,0.47,0.E+000)); +#52 = VECTOR('',#53,1.); +#53 = DIRECTION('',(-1.,2.22044604925E-016,0.E+000)); +#54 = ORIENTED_EDGE('',*,*,#55,.T.); +#55 = EDGE_CURVE('',#48,#22,#56,.T.); +#56 = LINE('',#57,#58); +#57 = CARTESIAN_POINT('',(5.E-002,0.47,0.E+000)); +#58 = VECTOR('',#59,1.); +#59 = DIRECTION('',(-0.707106781187,-0.707106781187,0.E+000)); +#60 = PLANE('',#61); +#61 = AXIS2_PLACEMENT_3D('',#62,#63,#64); +#62 = CARTESIAN_POINT('',(1.094354027027E-002,-2.681016220417E-002, +0.E+000)); +#63 = DIRECTION('',(0.E+000,0.E+000,1.)); +#64 = DIRECTION('',(-2.22044604925E-016,-1.,0.E+000)); +#65 = ADVANCED_FACE('',(#66),#91,.F.); +#66 = FACE_BOUND('',#67,.F.); +#67 = EDGE_LOOP('',(#68,#69,#77,#85)); +#68 = ORIENTED_EDGE('',*,*,#21,.F.); +#69 = ORIENTED_EDGE('',*,*,#70,.T.); +#70 = EDGE_CURVE('',#22,#71,#73,.T.); +#71 = VERTEX_POINT('',#72); +#72 = CARTESIAN_POINT('',(-0.15,0.27,0.1)); +#73 = LINE('',#74,#75); +#74 = CARTESIAN_POINT('',(-0.15,0.27,0.E+000)); +#75 = VECTOR('',#76,1.); +#76 = DIRECTION('',(0.E+000,0.E+000,1.)); +#77 = ORIENTED_EDGE('',*,*,#78,.F.); +#78 = EDGE_CURVE('',#79,#71,#81,.T.); +#79 = VERTEX_POINT('',#80); +#80 = CARTESIAN_POINT('',(-0.15,-0.47,0.1)); +#81 = LINE('',#82,#83); +#82 = CARTESIAN_POINT('',(-0.15,0.41,0.1)); +#83 = VECTOR('',#84,1.); +#84 = DIRECTION('',(2.22044604925E-016,1.,0.E+000)); +#85 = ORIENTED_EDGE('',*,*,#86,.F.); +#86 = EDGE_CURVE('',#24,#79,#87,.T.); +#87 = LINE('',#88,#89); +#88 = CARTESIAN_POINT('',(-0.15,-0.47,0.E+000)); +#89 = VECTOR('',#90,1.); +#90 = DIRECTION('',(0.E+000,0.E+000,1.)); +#91 = PLANE('',#92); +#92 = AXIS2_PLACEMENT_3D('',#93,#94,#95); +#93 = CARTESIAN_POINT('',(-0.15,0.27,0.E+000)); +#94 = DIRECTION('',(1.,-2.22044604925E-016,0.E+000)); +#95 = DIRECTION('',(-2.22044604925E-016,-1.,0.E+000)); +#96 = ADVANCED_FACE('',(#97),#115,.F.); +#97 = FACE_BOUND('',#98,.F.); +#98 = EDGE_LOOP('',(#99,#100,#101,#109)); +#99 = ORIENTED_EDGE('',*,*,#31,.F.); +#100 = ORIENTED_EDGE('',*,*,#86,.T.); +#101 = ORIENTED_EDGE('',*,*,#102,.F.); +#102 = EDGE_CURVE('',#103,#79,#105,.T.); +#103 = VERTEX_POINT('',#104); +#104 = CARTESIAN_POINT('',(0.15,-0.47,0.1)); +#105 = LINE('',#106,#107); +#106 = CARTESIAN_POINT('',(-0.35,-0.47,0.1)); +#107 = VECTOR('',#108,1.); +#108 = DIRECTION('',(-1.,3.700743415417E-017,0.E+000)); +#109 = ORIENTED_EDGE('',*,*,#110,.F.); +#110 = EDGE_CURVE('',#32,#103,#111,.T.); +#111 = LINE('',#112,#113); +#112 = CARTESIAN_POINT('',(0.15,-0.47,0.E+000)); +#113 = VECTOR('',#114,1.); +#114 = DIRECTION('',(0.E+000,0.E+000,1.)); +#115 = PLANE('',#116); +#116 = AXIS2_PLACEMENT_3D('',#117,#118,#119); +#117 = CARTESIAN_POINT('',(-0.15,-0.47,0.E+000)); +#118 = DIRECTION('',(3.700743415417E-017,1.,0.E+000)); +#119 = DIRECTION('',(1.,-3.700743415417E-017,0.E+000)); +#120 = ADVANCED_FACE('',(#121),#139,.F.); +#121 = FACE_BOUND('',#122,.F.); +#122 = EDGE_LOOP('',(#123,#124,#125,#133)); +#123 = ORIENTED_EDGE('',*,*,#39,.F.); +#124 = ORIENTED_EDGE('',*,*,#110,.T.); +#125 = ORIENTED_EDGE('',*,*,#126,.F.); +#126 = EDGE_CURVE('',#127,#103,#129,.T.); +#127 = VERTEX_POINT('',#128); +#128 = CARTESIAN_POINT('',(0.15,0.47,0.1)); +#129 = LINE('',#130,#131); +#130 = CARTESIAN_POINT('',(0.15,4.E-002,0.1)); +#131 = VECTOR('',#132,1.); +#132 = DIRECTION('',(-2.22044604925E-016,-1.,0.E+000)); +#133 = ORIENTED_EDGE('',*,*,#134,.F.); +#134 = EDGE_CURVE('',#40,#127,#135,.T.); +#135 = LINE('',#136,#137); +#136 = CARTESIAN_POINT('',(0.15,0.47,0.E+000)); +#137 = VECTOR('',#138,1.); +#138 = DIRECTION('',(0.E+000,0.E+000,1.)); +#139 = PLANE('',#140); +#140 = AXIS2_PLACEMENT_3D('',#141,#142,#143); +#141 = CARTESIAN_POINT('',(0.15,-0.47,0.E+000)); +#142 = DIRECTION('',(-1.,2.22044604925E-016,0.E+000)); +#143 = DIRECTION('',(2.22044604925E-016,1.,0.E+000)); +#144 = ADVANCED_FACE('',(#145),#163,.F.); +#145 = FACE_BOUND('',#146,.F.); +#146 = EDGE_LOOP('',(#147,#148,#149,#157)); +#147 = ORIENTED_EDGE('',*,*,#47,.F.); +#148 = ORIENTED_EDGE('',*,*,#134,.T.); +#149 = ORIENTED_EDGE('',*,*,#150,.F.); +#150 = EDGE_CURVE('',#151,#127,#153,.T.); +#151 = VERTEX_POINT('',#152); +#152 = CARTESIAN_POINT('',(5.E-002,0.47,0.1)); +#153 = LINE('',#154,#155); +#154 = CARTESIAN_POINT('',(-0.2,0.47,0.1)); +#155 = VECTOR('',#156,1.); +#156 = DIRECTION('',(1.,-2.22044604925E-016,0.E+000)); +#157 = ORIENTED_EDGE('',*,*,#158,.F.); +#158 = EDGE_CURVE('',#48,#151,#159,.T.); +#159 = LINE('',#160,#161); +#160 = CARTESIAN_POINT('',(5.E-002,0.47,0.E+000)); +#161 = VECTOR('',#162,1.); +#162 = DIRECTION('',(0.E+000,0.E+000,1.)); +#163 = PLANE('',#164); +#164 = AXIS2_PLACEMENT_3D('',#165,#166,#167); +#165 = CARTESIAN_POINT('',(0.15,0.47,0.E+000)); +#166 = DIRECTION('',(-2.22044604925E-016,-1.,0.E+000)); +#167 = DIRECTION('',(-1.,2.22044604925E-016,0.E+000)); +#168 = ADVANCED_FACE('',(#169),#180,.F.); +#169 = FACE_BOUND('',#170,.F.); +#170 = EDGE_LOOP('',(#171,#172,#173,#179)); +#171 = ORIENTED_EDGE('',*,*,#55,.F.); +#172 = ORIENTED_EDGE('',*,*,#158,.T.); +#173 = ORIENTED_EDGE('',*,*,#174,.F.); +#174 = EDGE_CURVE('',#71,#151,#175,.T.); +#175 = LINE('',#176,#177); +#176 = CARTESIAN_POINT('',(-8.E-002,0.34,0.1)); +#177 = VECTOR('',#178,1.); +#178 = DIRECTION('',(0.707106781187,0.707106781187,0.E+000)); +#179 = ORIENTED_EDGE('',*,*,#70,.F.); +#180 = PLANE('',#181); +#181 = AXIS2_PLACEMENT_3D('',#182,#183,#184); +#182 = CARTESIAN_POINT('',(5.E-002,0.47,0.E+000)); +#183 = DIRECTION('',(0.707106781187,-0.707106781187,0.E+000)); +#184 = DIRECTION('',(-0.707106781187,-0.707106781187,0.E+000)); +#185 = ADVANCED_FACE('',(#186,#412),#419,.F.); +#186 = FACE_BOUND('',#187,.F.); +#187 = EDGE_LOOP('',(#188,#198,#206,#214,#222,#230,#238,#246,#254,#262, +#270,#278,#286,#294,#302,#310,#318,#326,#334,#342,#350,#358,#366, +#374,#382,#390,#398,#406)); +#188 = ORIENTED_EDGE('',*,*,#189,.F.); +#189 = EDGE_CURVE('',#190,#192,#194,.T.); +#190 = VERTEX_POINT('',#191); +#191 = CARTESIAN_POINT('',(0.55,0.55,0.1)); +#192 = VERTEX_POINT('',#193); +#193 = CARTESIAN_POINT('',(0.55,0.466666666667,0.1)); +#194 = LINE('',#195,#196); +#195 = CARTESIAN_POINT('',(0.55,0.55,0.1)); +#196 = VECTOR('',#197,1.); +#197 = DIRECTION('',(-2.22044604925E-016,-1.,0.E+000)); +#198 = ORIENTED_EDGE('',*,*,#199,.F.); +#199 = EDGE_CURVE('',#200,#190,#202,.T.); +#200 = VERTEX_POINT('',#201); +#201 = CARTESIAN_POINT('',(-0.55,0.55,0.1)); +#202 = LINE('',#203,#204); +#203 = CARTESIAN_POINT('',(-0.55,0.55,0.1)); +#204 = VECTOR('',#205,1.); +#205 = DIRECTION('',(1.,-2.22044604925E-016,0.E+000)); +#206 = ORIENTED_EDGE('',*,*,#207,.T.); +#207 = EDGE_CURVE('',#200,#208,#210,.T.); +#208 = VERTEX_POINT('',#209); +#209 = CARTESIAN_POINT('',(-0.55,0.466666666667,0.1)); +#210 = LINE('',#211,#212); +#211 = CARTESIAN_POINT('',(-0.55,0.55,0.1)); +#212 = VECTOR('',#213,1.); +#213 = DIRECTION('',(-2.22044604925E-016,-1.,0.E+000)); +#214 = ORIENTED_EDGE('',*,*,#215,.T.); +#215 = EDGE_CURVE('',#208,#216,#218,.T.); +#216 = VERTEX_POINT('',#217); +#217 = CARTESIAN_POINT('',(-0.35,0.466666666667,0.1)); +#218 = LINE('',#219,#220); +#219 = CARTESIAN_POINT('',(-0.45,0.466666666667,0.1)); +#220 = VECTOR('',#221,1.); +#221 = DIRECTION('',(1.,-4.669739647545E-016,0.E+000)); +#222 = ORIENTED_EDGE('',*,*,#223,.T.); +#223 = EDGE_CURVE('',#216,#224,#226,.T.); +#224 = VERTEX_POINT('',#225); +#225 = CARTESIAN_POINT('',(-0.35,0.333333333333,0.1)); +#226 = LINE('',#227,#228); +#227 = CARTESIAN_POINT('',(-0.35,0.441666666667,0.1)); +#228 = VECTOR('',#229,1.); +#229 = DIRECTION('',(-4.669739647545E-016,-1.,0.E+000)); +#230 = ORIENTED_EDGE('',*,*,#231,.T.); +#231 = EDGE_CURVE('',#224,#232,#234,.T.); +#232 = VERTEX_POINT('',#233); +#233 = CARTESIAN_POINT('',(-0.55,0.333333333333,0.1)); +#234 = LINE('',#235,#236); +#235 = CARTESIAN_POINT('',(-0.575,0.333333333333,0.1)); +#236 = VECTOR('',#237,1.); +#237 = DIRECTION('',(-1.,4.669739647545E-016,0.E+000)); +#238 = ORIENTED_EDGE('',*,*,#239,.T.); +#239 = EDGE_CURVE('',#232,#240,#242,.T.); +#240 = VERTEX_POINT('',#241); +#241 = CARTESIAN_POINT('',(-0.55,6.666666666667E-002,0.1)); +#242 = LINE('',#243,#244); +#243 = CARTESIAN_POINT('',(-0.55,0.55,0.1)); +#244 = VECTOR('',#245,1.); +#245 = DIRECTION('',(-2.22044604925E-016,-1.,0.E+000)); +#246 = ORIENTED_EDGE('',*,*,#247,.T.); +#247 = EDGE_CURVE('',#240,#248,#250,.T.); +#248 = VERTEX_POINT('',#249); +#249 = CARTESIAN_POINT('',(-0.35,6.666666666667E-002,0.1)); +#250 = LINE('',#251,#252); +#251 = CARTESIAN_POINT('',(-0.45,6.666666666667E-002,0.1)); +#252 = VECTOR('',#253,1.); +#253 = DIRECTION('',(1.,-4.669739647545E-016,0.E+000)); +#254 = ORIENTED_EDGE('',*,*,#255,.T.); +#255 = EDGE_CURVE('',#248,#256,#258,.T.); +#256 = VERTEX_POINT('',#257); +#257 = CARTESIAN_POINT('',(-0.35,-6.666666666667E-002,0.1)); +#258 = LINE('',#259,#260); +#259 = CARTESIAN_POINT('',(-0.35,0.241666666667,0.1)); +#260 = VECTOR('',#261,1.); +#261 = DIRECTION('',(-4.669739647545E-016,-1.,0.E+000)); +#262 = ORIENTED_EDGE('',*,*,#263,.T.); +#263 = EDGE_CURVE('',#256,#264,#266,.T.); +#264 = VERTEX_POINT('',#265); +#265 = CARTESIAN_POINT('',(-0.55,-6.666666666667E-002,0.1)); +#266 = LINE('',#267,#268); +#267 = CARTESIAN_POINT('',(-0.575,-6.666666666667E-002,0.1)); +#268 = VECTOR('',#269,1.); +#269 = DIRECTION('',(-1.,4.669739647545E-016,0.E+000)); +#270 = ORIENTED_EDGE('',*,*,#271,.T.); +#271 = EDGE_CURVE('',#264,#272,#274,.T.); +#272 = VERTEX_POINT('',#273); +#273 = CARTESIAN_POINT('',(-0.55,-0.333333333333,0.1)); +#274 = LINE('',#275,#276); +#275 = CARTESIAN_POINT('',(-0.55,0.55,0.1)); +#276 = VECTOR('',#277,1.); +#277 = DIRECTION('',(-2.22044604925E-016,-1.,0.E+000)); +#278 = ORIENTED_EDGE('',*,*,#279,.T.); +#279 = EDGE_CURVE('',#272,#280,#282,.T.); +#280 = VERTEX_POINT('',#281); +#281 = CARTESIAN_POINT('',(-0.35,-0.333333333333,0.1)); +#282 = LINE('',#283,#284); +#283 = CARTESIAN_POINT('',(-0.45,-0.333333333333,0.1)); +#284 = VECTOR('',#285,1.); +#285 = DIRECTION('',(1.,-4.669739647545E-016,0.E+000)); +#286 = ORIENTED_EDGE('',*,*,#287,.T.); +#287 = EDGE_CURVE('',#280,#288,#290,.T.); +#288 = VERTEX_POINT('',#289); +#289 = CARTESIAN_POINT('',(-0.35,-0.466666666667,0.1)); +#290 = LINE('',#291,#292); +#291 = CARTESIAN_POINT('',(-0.35,4.166666666667E-002,0.1)); +#292 = VECTOR('',#293,1.); +#293 = DIRECTION('',(-4.669739647545E-016,-1.,0.E+000)); +#294 = ORIENTED_EDGE('',*,*,#295,.T.); +#295 = EDGE_CURVE('',#288,#296,#298,.T.); +#296 = VERTEX_POINT('',#297); +#297 = CARTESIAN_POINT('',(-0.55,-0.466666666667,0.1)); +#298 = LINE('',#299,#300); +#299 = CARTESIAN_POINT('',(-0.575,-0.466666666667,0.1)); +#300 = VECTOR('',#301,1.); +#301 = DIRECTION('',(-1.,4.669739647545E-016,0.E+000)); +#302 = ORIENTED_EDGE('',*,*,#303,.T.); +#303 = EDGE_CURVE('',#296,#304,#306,.T.); +#304 = VERTEX_POINT('',#305); +#305 = CARTESIAN_POINT('',(-0.55,-0.55,0.1)); +#306 = LINE('',#307,#308); +#307 = CARTESIAN_POINT('',(-0.55,0.55,0.1)); +#308 = VECTOR('',#309,1.); +#309 = DIRECTION('',(-2.22044604925E-016,-1.,0.E+000)); +#310 = ORIENTED_EDGE('',*,*,#311,.T.); +#311 = EDGE_CURVE('',#304,#312,#314,.T.); +#312 = VERTEX_POINT('',#313); +#313 = CARTESIAN_POINT('',(0.55,-0.55,0.1)); +#314 = LINE('',#315,#316); +#315 = CARTESIAN_POINT('',(-0.55,-0.55,0.1)); +#316 = VECTOR('',#317,1.); +#317 = DIRECTION('',(1.,-2.22044604925E-016,0.E+000)); +#318 = ORIENTED_EDGE('',*,*,#319,.F.); +#319 = EDGE_CURVE('',#320,#312,#322,.T.); +#320 = VERTEX_POINT('',#321); +#321 = CARTESIAN_POINT('',(0.55,-0.466666666667,0.1)); +#322 = LINE('',#323,#324); +#323 = CARTESIAN_POINT('',(0.55,0.55,0.1)); +#324 = VECTOR('',#325,1.); +#325 = DIRECTION('',(-2.22044604925E-016,-1.,0.E+000)); +#326 = ORIENTED_EDGE('',*,*,#327,.T.); +#327 = EDGE_CURVE('',#320,#328,#330,.T.); +#328 = VERTEX_POINT('',#329); +#329 = CARTESIAN_POINT('',(0.35,-0.466666666667,0.1)); +#330 = LINE('',#331,#332); +#331 = CARTESIAN_POINT('',(-0.1,-0.466666666667,0.1)); +#332 = VECTOR('',#333,1.); +#333 = DIRECTION('',(-1.,3.445092848398E-016,0.E+000)); +#334 = ORIENTED_EDGE('',*,*,#335,.T.); +#335 = EDGE_CURVE('',#328,#336,#338,.T.); +#336 = VERTEX_POINT('',#337); +#337 = CARTESIAN_POINT('',(0.35,-0.333333333333,0.1)); +#338 = LINE('',#339,#340); +#339 = CARTESIAN_POINT('',(0.35,0.108333333333,0.1)); +#340 = VECTOR('',#341,1.); +#341 = DIRECTION('',(3.445092848398E-016,1.,0.E+000)); +#342 = ORIENTED_EDGE('',*,*,#343,.T.); +#343 = EDGE_CURVE('',#336,#344,#346,.T.); +#344 = VERTEX_POINT('',#345); +#345 = CARTESIAN_POINT('',(0.55,-0.333333333333,0.1)); +#346 = LINE('',#347,#348); +#347 = CARTESIAN_POINT('',(2.5E-002,-0.333333333333,0.1)); +#348 = VECTOR('',#349,1.); +#349 = DIRECTION('',(1.,-3.445092848398E-016,0.E+000)); +#350 = ORIENTED_EDGE('',*,*,#351,.F.); +#351 = EDGE_CURVE('',#352,#344,#354,.T.); +#352 = VERTEX_POINT('',#353); +#353 = CARTESIAN_POINT('',(0.55,-6.666666666667E-002,0.1)); +#354 = LINE('',#355,#356); +#355 = CARTESIAN_POINT('',(0.55,0.55,0.1)); +#356 = VECTOR('',#357,1.); +#357 = DIRECTION('',(-2.22044604925E-016,-1.,0.E+000)); +#358 = ORIENTED_EDGE('',*,*,#359,.T.); +#359 = EDGE_CURVE('',#352,#360,#362,.T.); +#360 = VERTEX_POINT('',#361); +#361 = CARTESIAN_POINT('',(0.35,-6.666666666667E-002,0.1)); +#362 = LINE('',#363,#364); +#363 = CARTESIAN_POINT('',(-0.1,-6.666666666667E-002,0.1)); +#364 = VECTOR('',#365,1.); +#365 = DIRECTION('',(-1.,3.445092848398E-016,0.E+000)); +#366 = ORIENTED_EDGE('',*,*,#367,.T.); +#367 = EDGE_CURVE('',#360,#368,#370,.T.); +#368 = VERTEX_POINT('',#369); +#369 = CARTESIAN_POINT('',(0.35,6.666666666667E-002,0.1)); +#370 = LINE('',#371,#372); +#371 = CARTESIAN_POINT('',(0.35,0.308333333333,0.1)); +#372 = VECTOR('',#373,1.); +#373 = DIRECTION('',(3.445092848398E-016,1.,0.E+000)); +#374 = ORIENTED_EDGE('',*,*,#375,.T.); +#375 = EDGE_CURVE('',#368,#376,#378,.T.); +#376 = VERTEX_POINT('',#377); +#377 = CARTESIAN_POINT('',(0.55,6.666666666667E-002,0.1)); +#378 = LINE('',#379,#380); +#379 = CARTESIAN_POINT('',(2.5E-002,6.666666666667E-002,0.1)); +#380 = VECTOR('',#381,1.); +#381 = DIRECTION('',(1.,-3.445092848398E-016,0.E+000)); +#382 = ORIENTED_EDGE('',*,*,#383,.F.); +#383 = EDGE_CURVE('',#384,#376,#386,.T.); +#384 = VERTEX_POINT('',#385); +#385 = CARTESIAN_POINT('',(0.55,0.333333333333,0.1)); +#386 = LINE('',#387,#388); +#387 = CARTESIAN_POINT('',(0.55,0.55,0.1)); +#388 = VECTOR('',#389,1.); +#389 = DIRECTION('',(-2.22044604925E-016,-1.,0.E+000)); +#390 = ORIENTED_EDGE('',*,*,#391,.T.); +#391 = EDGE_CURVE('',#384,#392,#394,.T.); +#392 = VERTEX_POINT('',#393); +#393 = CARTESIAN_POINT('',(0.35,0.333333333333,0.1)); +#394 = LINE('',#395,#396); +#395 = CARTESIAN_POINT('',(-1.E-001,0.333333333333,0.1)); +#396 = VECTOR('',#397,1.); +#397 = DIRECTION('',(-1.,3.445092848398E-016,0.E+000)); +#398 = ORIENTED_EDGE('',*,*,#399,.T.); +#399 = EDGE_CURVE('',#392,#400,#402,.T.); +#400 = VERTEX_POINT('',#401); +#401 = CARTESIAN_POINT('',(0.35,0.466666666667,0.1)); +#402 = LINE('',#403,#404); +#403 = CARTESIAN_POINT('',(0.35,0.508333333333,0.1)); +#404 = VECTOR('',#405,1.); +#405 = DIRECTION('',(3.445092848398E-016,1.,0.E+000)); +#406 = ORIENTED_EDGE('',*,*,#407,.T.); +#407 = EDGE_CURVE('',#400,#192,#408,.T.); +#408 = LINE('',#409,#410); +#409 = CARTESIAN_POINT('',(2.5E-002,0.466666666667,0.1)); +#410 = VECTOR('',#411,1.); +#411 = DIRECTION('',(1.,-3.445092848398E-016,0.E+000)); +#412 = FACE_BOUND('',#413,.F.); +#413 = EDGE_LOOP('',(#414,#415,#416,#417,#418)); +#414 = ORIENTED_EDGE('',*,*,#174,.T.); +#415 = ORIENTED_EDGE('',*,*,#150,.T.); +#416 = ORIENTED_EDGE('',*,*,#126,.T.); +#417 = ORIENTED_EDGE('',*,*,#102,.T.); +#418 = ORIENTED_EDGE('',*,*,#78,.T.); +#419 = PLANE('',#420); +#420 = AXIS2_PLACEMENT_3D('',#421,#422,#423); +#421 = CARTESIAN_POINT('',(-0.55,0.55,0.1)); +#422 = DIRECTION('',(0.E+000,0.E+000,1.)); +#423 = DIRECTION('',(-2.22044604925E-016,-1.,0.E+000)); +#424 = ADVANCED_FACE('',(#425),#519,.T.); +#425 = FACE_BOUND('',#426,.T.); +#426 = EDGE_LOOP('',(#427,#428,#436,#444,#450,#451,#459,#467,#473,#474, +#482,#490,#496,#497,#505,#513)); +#427 = ORIENTED_EDGE('',*,*,#189,.F.); +#428 = ORIENTED_EDGE('',*,*,#429,.T.); +#429 = EDGE_CURVE('',#190,#430,#432,.T.); +#430 = VERTEX_POINT('',#431); +#431 = CARTESIAN_POINT('',(0.55,0.55,0.4)); +#432 = LINE('',#433,#434); +#433 = CARTESIAN_POINT('',(0.55,0.55,0.1)); +#434 = VECTOR('',#435,1.); +#435 = DIRECTION('',(0.E+000,0.E+000,1.)); +#436 = ORIENTED_EDGE('',*,*,#437,.T.); +#437 = EDGE_CURVE('',#430,#438,#440,.T.); +#438 = VERTEX_POINT('',#439); +#439 = CARTESIAN_POINT('',(0.55,-0.55,0.4)); +#440 = LINE('',#441,#442); +#441 = CARTESIAN_POINT('',(0.55,0.55,0.4)); +#442 = VECTOR('',#443,1.); +#443 = DIRECTION('',(-2.22044604925E-016,-1.,0.E+000)); +#444 = ORIENTED_EDGE('',*,*,#445,.F.); +#445 = EDGE_CURVE('',#312,#438,#446,.T.); +#446 = LINE('',#447,#448); +#447 = CARTESIAN_POINT('',(0.55,-0.55,0.1)); +#448 = VECTOR('',#449,1.); +#449 = DIRECTION('',(0.E+000,0.E+000,1.)); +#450 = ORIENTED_EDGE('',*,*,#319,.F.); +#451 = ORIENTED_EDGE('',*,*,#452,.T.); +#452 = EDGE_CURVE('',#320,#453,#455,.T.); +#453 = VERTEX_POINT('',#454); +#454 = CARTESIAN_POINT('',(0.55,-0.466666666667,0.2)); +#455 = LINE('',#456,#457); +#456 = CARTESIAN_POINT('',(0.55,-0.466666666667,5.E-002)); +#457 = VECTOR('',#458,1.); +#458 = DIRECTION('',(0.E+000,0.E+000,1.)); +#459 = ORIENTED_EDGE('',*,*,#460,.F.); +#460 = EDGE_CURVE('',#461,#453,#463,.T.); +#461 = VERTEX_POINT('',#462); +#462 = CARTESIAN_POINT('',(0.55,-0.333333333333,0.2)); +#463 = LINE('',#464,#465); +#464 = CARTESIAN_POINT('',(0.55,7.5E-002,0.2)); +#465 = VECTOR('',#466,1.); +#466 = DIRECTION('',(-2.22044604925E-016,-1.,0.E+000)); +#467 = ORIENTED_EDGE('',*,*,#468,.T.); +#468 = EDGE_CURVE('',#461,#344,#469,.T.); +#469 = LINE('',#470,#471); +#470 = CARTESIAN_POINT('',(0.55,-0.333333333333,5.E-002)); +#471 = VECTOR('',#472,1.); +#472 = DIRECTION('',(0.E+000,-0.E+000,-1.)); +#473 = ORIENTED_EDGE('',*,*,#351,.F.); +#474 = ORIENTED_EDGE('',*,*,#475,.T.); +#475 = EDGE_CURVE('',#352,#476,#478,.T.); +#476 = VERTEX_POINT('',#477); +#477 = CARTESIAN_POINT('',(0.55,-6.666666666667E-002,0.2)); +#478 = LINE('',#479,#480); +#479 = CARTESIAN_POINT('',(0.55,-6.666666666667E-002,5.E-002)); +#480 = VECTOR('',#481,1.); +#481 = DIRECTION('',(0.E+000,0.E+000,1.)); +#482 = ORIENTED_EDGE('',*,*,#483,.F.); +#483 = EDGE_CURVE('',#484,#476,#486,.T.); +#484 = VERTEX_POINT('',#485); +#485 = CARTESIAN_POINT('',(0.55,6.666666666667E-002,0.2)); +#486 = LINE('',#487,#488); +#487 = CARTESIAN_POINT('',(0.55,0.275,0.2)); +#488 = VECTOR('',#489,1.); +#489 = DIRECTION('',(-2.22044604925E-016,-1.,0.E+000)); +#490 = ORIENTED_EDGE('',*,*,#491,.T.); +#491 = EDGE_CURVE('',#484,#376,#492,.T.); +#492 = LINE('',#493,#494); +#493 = CARTESIAN_POINT('',(0.55,6.666666666667E-002,5.E-002)); +#494 = VECTOR('',#495,1.); +#495 = DIRECTION('',(0.E+000,-0.E+000,-1.)); +#496 = ORIENTED_EDGE('',*,*,#383,.F.); +#497 = ORIENTED_EDGE('',*,*,#498,.T.); +#498 = EDGE_CURVE('',#384,#499,#501,.T.); +#499 = VERTEX_POINT('',#500); +#500 = CARTESIAN_POINT('',(0.55,0.333333333333,0.2)); +#501 = LINE('',#502,#503); +#502 = CARTESIAN_POINT('',(0.55,0.333333333333,5.E-002)); +#503 = VECTOR('',#504,1.); +#504 = DIRECTION('',(0.E+000,0.E+000,1.)); +#505 = ORIENTED_EDGE('',*,*,#506,.F.); +#506 = EDGE_CURVE('',#507,#499,#509,.T.); +#507 = VERTEX_POINT('',#508); +#508 = CARTESIAN_POINT('',(0.55,0.466666666667,0.2)); +#509 = LINE('',#510,#511); +#510 = CARTESIAN_POINT('',(0.55,0.475,0.2)); +#511 = VECTOR('',#512,1.); +#512 = DIRECTION('',(-2.22044604925E-016,-1.,0.E+000)); +#513 = ORIENTED_EDGE('',*,*,#514,.T.); +#514 = EDGE_CURVE('',#507,#192,#515,.T.); +#515 = LINE('',#516,#517); +#516 = CARTESIAN_POINT('',(0.55,0.466666666667,5.E-002)); +#517 = VECTOR('',#518,1.); +#518 = DIRECTION('',(0.E+000,-0.E+000,-1.)); +#519 = PLANE('',#520); +#520 = AXIS2_PLACEMENT_3D('',#521,#522,#523); +#521 = CARTESIAN_POINT('',(0.55,0.55,0.1)); +#522 = DIRECTION('',(1.,-2.22044604925E-016,0.E+000)); +#523 = DIRECTION('',(0.E+000,0.E+000,1.)); +#524 = ADVANCED_FACE('',(#525),#543,.F.); +#525 = FACE_BOUND('',#526,.F.); +#526 = EDGE_LOOP('',(#527,#535,#536,#537)); +#527 = ORIENTED_EDGE('',*,*,#528,.F.); +#528 = EDGE_CURVE('',#200,#529,#531,.T.); +#529 = VERTEX_POINT('',#530); +#530 = CARTESIAN_POINT('',(-0.55,0.55,0.4)); +#531 = LINE('',#532,#533); +#532 = CARTESIAN_POINT('',(-0.55,0.55,0.1)); +#533 = VECTOR('',#534,1.); +#534 = DIRECTION('',(0.E+000,0.E+000,1.)); +#535 = ORIENTED_EDGE('',*,*,#199,.T.); +#536 = ORIENTED_EDGE('',*,*,#429,.T.); +#537 = ORIENTED_EDGE('',*,*,#538,.F.); +#538 = EDGE_CURVE('',#529,#430,#539,.T.); +#539 = LINE('',#540,#541); +#540 = CARTESIAN_POINT('',(-0.55,0.55,0.4)); +#541 = VECTOR('',#542,1.); +#542 = DIRECTION('',(1.,-2.22044604925E-016,0.E+000)); +#543 = PLANE('',#544); +#544 = AXIS2_PLACEMENT_3D('',#545,#546,#547); +#545 = CARTESIAN_POINT('',(-0.55,0.55,0.1)); +#546 = DIRECTION('',(-2.22044604925E-016,-1.,0.E+000)); +#547 = DIRECTION('',(0.E+000,0.E+000,1.)); +#548 = ADVANCED_FACE('',(#549),#583,.F.); +#549 = FACE_BOUND('',#550,.F.); +#550 = EDGE_LOOP('',(#551,#561,#569,#575,#576,#577)); +#551 = ORIENTED_EDGE('',*,*,#552,.F.); +#552 = EDGE_CURVE('',#553,#555,#557,.T.); +#553 = VERTEX_POINT('',#554); +#554 = CARTESIAN_POINT('',(0.6,0.466666666667,0.E+000)); +#555 = VERTEX_POINT('',#556); +#556 = CARTESIAN_POINT('',(0.35,0.466666666667,0.E+000)); +#557 = LINE('',#558,#559); +#558 = CARTESIAN_POINT('',(0.6,0.466666666667,0.E+000)); +#559 = VECTOR('',#560,1.); +#560 = DIRECTION('',(-1.,3.445092848398E-016,0.E+000)); +#561 = ORIENTED_EDGE('',*,*,#562,.T.); +#562 = EDGE_CURVE('',#553,#563,#565,.T.); +#563 = VERTEX_POINT('',#564); +#564 = CARTESIAN_POINT('',(0.6,0.466666666667,0.2)); +#565 = LINE('',#566,#567); +#566 = CARTESIAN_POINT('',(0.6,0.466666666667,0.E+000)); +#567 = VECTOR('',#568,1.); +#568 = DIRECTION('',(0.E+000,0.E+000,1.)); +#569 = ORIENTED_EDGE('',*,*,#570,.T.); +#570 = EDGE_CURVE('',#563,#507,#571,.T.); +#571 = LINE('',#572,#573); +#572 = CARTESIAN_POINT('',(0.6,0.466666666667,0.2)); +#573 = VECTOR('',#574,1.); +#574 = DIRECTION('',(-1.,3.445092848398E-016,0.E+000)); +#575 = ORIENTED_EDGE('',*,*,#514,.T.); +#576 = ORIENTED_EDGE('',*,*,#407,.F.); +#577 = ORIENTED_EDGE('',*,*,#578,.F.); +#578 = EDGE_CURVE('',#555,#400,#579,.T.); +#579 = LINE('',#580,#581); +#580 = CARTESIAN_POINT('',(0.35,0.466666666667,0.E+000)); +#581 = VECTOR('',#582,1.); +#582 = DIRECTION('',(0.E+000,0.E+000,1.)); +#583 = PLANE('',#584); +#584 = AXIS2_PLACEMENT_3D('',#585,#586,#587); +#585 = CARTESIAN_POINT('',(0.6,0.466666666667,0.E+000)); +#586 = DIRECTION('',(-3.445092848398E-016,-1.,0.E+000)); +#587 = DIRECTION('',(-1.,3.445092848398E-016,0.E+000)); +#588 = ADVANCED_FACE('',(#589),#676,.F.); +#589 = FACE_BOUND('',#590,.F.); +#590 = EDGE_LOOP('',(#591,#592,#593,#601,#607,#608,#616,#624,#630,#631, +#639,#647,#653,#654,#662,#670)); +#591 = ORIENTED_EDGE('',*,*,#207,.F.); +#592 = ORIENTED_EDGE('',*,*,#528,.T.); +#593 = ORIENTED_EDGE('',*,*,#594,.T.); +#594 = EDGE_CURVE('',#529,#595,#597,.T.); +#595 = VERTEX_POINT('',#596); +#596 = CARTESIAN_POINT('',(-0.55,-0.55,0.4)); +#597 = LINE('',#598,#599); +#598 = CARTESIAN_POINT('',(-0.55,0.55,0.4)); +#599 = VECTOR('',#600,1.); +#600 = DIRECTION('',(-2.22044604925E-016,-1.,0.E+000)); +#601 = ORIENTED_EDGE('',*,*,#602,.F.); +#602 = EDGE_CURVE('',#304,#595,#603,.T.); +#603 = LINE('',#604,#605); +#604 = CARTESIAN_POINT('',(-0.55,-0.55,0.1)); +#605 = VECTOR('',#606,1.); +#606 = DIRECTION('',(0.E+000,0.E+000,1.)); +#607 = ORIENTED_EDGE('',*,*,#303,.F.); +#608 = ORIENTED_EDGE('',*,*,#609,.T.); +#609 = EDGE_CURVE('',#296,#610,#612,.T.); +#610 = VERTEX_POINT('',#611); +#611 = CARTESIAN_POINT('',(-0.55,-0.466666666667,0.2)); +#612 = LINE('',#613,#614); +#613 = CARTESIAN_POINT('',(-0.55,-0.466666666667,5.E-002)); +#614 = VECTOR('',#615,1.); +#615 = DIRECTION('',(0.E+000,0.E+000,1.)); +#616 = ORIENTED_EDGE('',*,*,#617,.F.); +#617 = EDGE_CURVE('',#618,#610,#620,.T.); +#618 = VERTEX_POINT('',#619); +#619 = CARTESIAN_POINT('',(-0.55,-0.333333333333,0.2)); +#620 = LINE('',#621,#622); +#621 = CARTESIAN_POINT('',(-0.55,7.5E-002,0.2)); +#622 = VECTOR('',#623,1.); +#623 = DIRECTION('',(-2.22044604925E-016,-1.,0.E+000)); +#624 = ORIENTED_EDGE('',*,*,#625,.T.); +#625 = EDGE_CURVE('',#618,#272,#626,.T.); +#626 = LINE('',#627,#628); +#627 = CARTESIAN_POINT('',(-0.55,-0.333333333333,5.E-002)); +#628 = VECTOR('',#629,1.); +#629 = DIRECTION('',(0.E+000,-0.E+000,-1.)); +#630 = ORIENTED_EDGE('',*,*,#271,.F.); +#631 = ORIENTED_EDGE('',*,*,#632,.T.); +#632 = EDGE_CURVE('',#264,#633,#635,.T.); +#633 = VERTEX_POINT('',#634); +#634 = CARTESIAN_POINT('',(-0.55,-6.666666666667E-002,0.2)); +#635 = LINE('',#636,#637); +#636 = CARTESIAN_POINT('',(-0.55,-6.666666666667E-002,5.E-002)); +#637 = VECTOR('',#638,1.); +#638 = DIRECTION('',(0.E+000,0.E+000,1.)); +#639 = ORIENTED_EDGE('',*,*,#640,.F.); +#640 = EDGE_CURVE('',#641,#633,#643,.T.); +#641 = VERTEX_POINT('',#642); +#642 = CARTESIAN_POINT('',(-0.55,6.666666666667E-002,0.2)); +#643 = LINE('',#644,#645); +#644 = CARTESIAN_POINT('',(-0.55,0.275,0.2)); +#645 = VECTOR('',#646,1.); +#646 = DIRECTION('',(-2.22044604925E-016,-1.,0.E+000)); +#647 = ORIENTED_EDGE('',*,*,#648,.T.); +#648 = EDGE_CURVE('',#641,#240,#649,.T.); +#649 = LINE('',#650,#651); +#650 = CARTESIAN_POINT('',(-0.55,6.666666666667E-002,5.E-002)); +#651 = VECTOR('',#652,1.); +#652 = DIRECTION('',(0.E+000,-0.E+000,-1.)); +#653 = ORIENTED_EDGE('',*,*,#239,.F.); +#654 = ORIENTED_EDGE('',*,*,#655,.T.); +#655 = EDGE_CURVE('',#232,#656,#658,.T.); +#656 = VERTEX_POINT('',#657); +#657 = CARTESIAN_POINT('',(-0.55,0.333333333333,0.2)); +#658 = LINE('',#659,#660); +#659 = CARTESIAN_POINT('',(-0.55,0.333333333333,5.E-002)); +#660 = VECTOR('',#661,1.); +#661 = DIRECTION('',(0.E+000,0.E+000,1.)); +#662 = ORIENTED_EDGE('',*,*,#663,.F.); +#663 = EDGE_CURVE('',#664,#656,#666,.T.); +#664 = VERTEX_POINT('',#665); +#665 = CARTESIAN_POINT('',(-0.55,0.466666666667,0.2)); +#666 = LINE('',#667,#668); +#667 = CARTESIAN_POINT('',(-0.55,0.475,0.2)); +#668 = VECTOR('',#669,1.); +#669 = DIRECTION('',(-2.22044604925E-016,-1.,0.E+000)); +#670 = ORIENTED_EDGE('',*,*,#671,.T.); +#671 = EDGE_CURVE('',#664,#208,#672,.T.); +#672 = LINE('',#673,#674); +#673 = CARTESIAN_POINT('',(-0.55,0.466666666667,5.E-002)); +#674 = VECTOR('',#675,1.); +#675 = DIRECTION('',(0.E+000,-0.E+000,-1.)); +#676 = PLANE('',#677); +#677 = AXIS2_PLACEMENT_3D('',#678,#679,#680); +#678 = CARTESIAN_POINT('',(-0.55,0.55,0.1)); +#679 = DIRECTION('',(1.,-2.22044604925E-016,0.E+000)); +#680 = DIRECTION('',(0.E+000,0.E+000,1.)); +#681 = ADVANCED_FACE('',(#682),#700,.F.); +#682 = FACE_BOUND('',#683,.F.); +#683 = EDGE_LOOP('',(#684,#692,#693,#694)); +#684 = ORIENTED_EDGE('',*,*,#685,.F.); +#685 = EDGE_CURVE('',#555,#686,#688,.T.); +#686 = VERTEX_POINT('',#687); +#687 = CARTESIAN_POINT('',(0.35,0.333333333333,0.E+000)); +#688 = LINE('',#689,#690); +#689 = CARTESIAN_POINT('',(0.35,0.466666666667,0.E+000)); +#690 = VECTOR('',#691,1.); +#691 = DIRECTION('',(-3.445092848398E-016,-1.,0.E+000)); +#692 = ORIENTED_EDGE('',*,*,#578,.T.); +#693 = ORIENTED_EDGE('',*,*,#399,.F.); +#694 = ORIENTED_EDGE('',*,*,#695,.F.); +#695 = EDGE_CURVE('',#686,#392,#696,.T.); +#696 = LINE('',#697,#698); +#697 = CARTESIAN_POINT('',(0.35,0.333333333333,0.E+000)); +#698 = VECTOR('',#699,1.); +#699 = DIRECTION('',(0.E+000,0.E+000,1.)); +#700 = PLANE('',#701); +#701 = AXIS2_PLACEMENT_3D('',#702,#703,#704); +#702 = CARTESIAN_POINT('',(0.35,0.466666666667,0.E+000)); +#703 = DIRECTION('',(1.,-3.445092848398E-016,0.E+000)); +#704 = DIRECTION('',(-3.445092848398E-016,-1.,0.E+000)); +#705 = ADVANCED_FACE('',(#706),#740,.F.); +#706 = FACE_BOUND('',#707,.F.); +#707 = EDGE_LOOP('',(#708,#718,#724,#725,#726,#734)); +#708 = ORIENTED_EDGE('',*,*,#709,.F.); +#709 = EDGE_CURVE('',#710,#712,#714,.T.); +#710 = VERTEX_POINT('',#711); +#711 = CARTESIAN_POINT('',(-0.35,0.466666666667,0.E+000)); +#712 = VERTEX_POINT('',#713); +#713 = CARTESIAN_POINT('',(-0.6,0.466666666667,0.E+000)); +#714 = LINE('',#715,#716); +#715 = CARTESIAN_POINT('',(-0.35,0.466666666667,0.E+000)); +#716 = VECTOR('',#717,1.); +#717 = DIRECTION('',(-1.,4.669739647545E-016,0.E+000)); +#718 = ORIENTED_EDGE('',*,*,#719,.T.); +#719 = EDGE_CURVE('',#710,#216,#720,.T.); +#720 = LINE('',#721,#722); +#721 = CARTESIAN_POINT('',(-0.35,0.466666666667,0.E+000)); +#722 = VECTOR('',#723,1.); +#723 = DIRECTION('',(0.E+000,0.E+000,1.)); +#724 = ORIENTED_EDGE('',*,*,#215,.F.); +#725 = ORIENTED_EDGE('',*,*,#671,.F.); +#726 = ORIENTED_EDGE('',*,*,#727,.T.); +#727 = EDGE_CURVE('',#664,#728,#730,.T.); +#728 = VERTEX_POINT('',#729); +#729 = CARTESIAN_POINT('',(-0.6,0.466666666667,0.2)); +#730 = LINE('',#731,#732); +#731 = CARTESIAN_POINT('',(-0.35,0.466666666667,0.2)); +#732 = VECTOR('',#733,1.); +#733 = DIRECTION('',(-1.,4.669739647545E-016,0.E+000)); +#734 = ORIENTED_EDGE('',*,*,#735,.F.); +#735 = EDGE_CURVE('',#712,#728,#736,.T.); +#736 = LINE('',#737,#738); +#737 = CARTESIAN_POINT('',(-0.6,0.466666666667,0.E+000)); +#738 = VECTOR('',#739,1.); +#739 = DIRECTION('',(0.E+000,0.E+000,1.)); +#740 = PLANE('',#741); +#741 = AXIS2_PLACEMENT_3D('',#742,#743,#744); +#742 = CARTESIAN_POINT('',(-0.35,0.466666666667,0.E+000)); +#743 = DIRECTION('',(-4.669739647545E-016,-1.,0.E+000)); +#744 = DIRECTION('',(-1.,4.669739647545E-016,0.E+000)); +#745 = ADVANCED_FACE('',(#746),#773,.F.); +#746 = FACE_BOUND('',#747,.F.); +#747 = EDGE_LOOP('',(#748,#756,#757,#758,#759,#767)); +#748 = ORIENTED_EDGE('',*,*,#749,.F.); +#749 = EDGE_CURVE('',#686,#750,#752,.T.); +#750 = VERTEX_POINT('',#751); +#751 = CARTESIAN_POINT('',(0.6,0.333333333333,0.E+000)); +#752 = LINE('',#753,#754); +#753 = CARTESIAN_POINT('',(0.35,0.333333333333,0.E+000)); +#754 = VECTOR('',#755,1.); +#755 = DIRECTION('',(1.,-3.445092848398E-016,0.E+000)); +#756 = ORIENTED_EDGE('',*,*,#695,.T.); +#757 = ORIENTED_EDGE('',*,*,#391,.F.); +#758 = ORIENTED_EDGE('',*,*,#498,.T.); +#759 = ORIENTED_EDGE('',*,*,#760,.T.); +#760 = EDGE_CURVE('',#499,#761,#763,.T.); +#761 = VERTEX_POINT('',#762); +#762 = CARTESIAN_POINT('',(0.6,0.333333333333,0.2)); +#763 = LINE('',#764,#765); +#764 = CARTESIAN_POINT('',(0.35,0.333333333333,0.2)); +#765 = VECTOR('',#766,1.); +#766 = DIRECTION('',(1.,-3.445092848398E-016,0.E+000)); +#767 = ORIENTED_EDGE('',*,*,#768,.F.); +#768 = EDGE_CURVE('',#750,#761,#769,.T.); +#769 = LINE('',#770,#771); +#770 = CARTESIAN_POINT('',(0.6,0.333333333333,0.E+000)); +#771 = VECTOR('',#772,1.); +#772 = DIRECTION('',(0.E+000,0.E+000,1.)); +#773 = PLANE('',#774); +#774 = AXIS2_PLACEMENT_3D('',#775,#776,#777); +#775 = CARTESIAN_POINT('',(0.35,0.333333333333,0.E+000)); +#776 = DIRECTION('',(3.445092848398E-016,1.,0.E+000)); +#777 = DIRECTION('',(1.,-3.445092848398E-016,0.E+000)); +#778 = ADVANCED_FACE('',(#779),#797,.F.); +#779 = FACE_BOUND('',#780,.F.); +#780 = EDGE_LOOP('',(#781,#789,#795,#796)); +#781 = ORIENTED_EDGE('',*,*,#782,.F.); +#782 = EDGE_CURVE('',#783,#710,#785,.T.); +#783 = VERTEX_POINT('',#784); +#784 = CARTESIAN_POINT('',(-0.35,0.333333333333,0.E+000)); +#785 = LINE('',#786,#787); +#786 = CARTESIAN_POINT('',(-0.35,0.333333333333,0.E+000)); +#787 = VECTOR('',#788,1.); +#788 = DIRECTION('',(4.669739647545E-016,1.,0.E+000)); +#789 = ORIENTED_EDGE('',*,*,#790,.T.); +#790 = EDGE_CURVE('',#783,#224,#791,.T.); +#791 = LINE('',#792,#793); +#792 = CARTESIAN_POINT('',(-0.35,0.333333333333,0.E+000)); +#793 = VECTOR('',#794,1.); +#794 = DIRECTION('',(0.E+000,0.E+000,1.)); +#795 = ORIENTED_EDGE('',*,*,#223,.F.); +#796 = ORIENTED_EDGE('',*,*,#719,.F.); +#797 = PLANE('',#798); +#798 = AXIS2_PLACEMENT_3D('',#799,#800,#801); +#799 = CARTESIAN_POINT('',(-0.35,0.333333333333,0.E+000)); +#800 = DIRECTION('',(-1.,4.669739647545E-016,0.E+000)); +#801 = DIRECTION('',(4.669739647545E-016,1.,0.E+000)); +#802 = ADVANCED_FACE('',(#803),#830,.F.); +#803 = FACE_BOUND('',#804,.F.); +#804 = EDGE_LOOP('',(#805,#813,#821,#827,#828,#829)); +#805 = ORIENTED_EDGE('',*,*,#806,.F.); +#806 = EDGE_CURVE('',#807,#783,#809,.T.); +#807 = VERTEX_POINT('',#808); +#808 = CARTESIAN_POINT('',(-0.6,0.333333333333,0.E+000)); +#809 = LINE('',#810,#811); +#810 = CARTESIAN_POINT('',(-0.6,0.333333333333,0.E+000)); +#811 = VECTOR('',#812,1.); +#812 = DIRECTION('',(1.,-4.669739647545E-016,0.E+000)); +#813 = ORIENTED_EDGE('',*,*,#814,.T.); +#814 = EDGE_CURVE('',#807,#815,#817,.T.); +#815 = VERTEX_POINT('',#816); +#816 = CARTESIAN_POINT('',(-0.6,0.333333333333,0.2)); +#817 = LINE('',#818,#819); +#818 = CARTESIAN_POINT('',(-0.6,0.333333333333,0.E+000)); +#819 = VECTOR('',#820,1.); +#820 = DIRECTION('',(0.E+000,0.E+000,1.)); +#821 = ORIENTED_EDGE('',*,*,#822,.T.); +#822 = EDGE_CURVE('',#815,#656,#823,.T.); +#823 = LINE('',#824,#825); +#824 = CARTESIAN_POINT('',(-0.6,0.333333333333,0.2)); +#825 = VECTOR('',#826,1.); +#826 = DIRECTION('',(1.,-4.669739647545E-016,0.E+000)); +#827 = ORIENTED_EDGE('',*,*,#655,.F.); +#828 = ORIENTED_EDGE('',*,*,#231,.F.); +#829 = ORIENTED_EDGE('',*,*,#790,.F.); +#830 = PLANE('',#831); +#831 = AXIS2_PLACEMENT_3D('',#832,#833,#834); +#832 = CARTESIAN_POINT('',(-0.6,0.333333333333,0.E+000)); +#833 = DIRECTION('',(4.669739647545E-016,1.,0.E+000)); +#834 = DIRECTION('',(1.,-4.669739647545E-016,0.E+000)); +#835 = ADVANCED_FACE('',(#836),#870,.F.); +#836 = FACE_BOUND('',#837,.F.); +#837 = EDGE_LOOP('',(#838,#848,#856,#862,#863,#864)); +#838 = ORIENTED_EDGE('',*,*,#839,.F.); +#839 = EDGE_CURVE('',#840,#842,#844,.T.); +#840 = VERTEX_POINT('',#841); +#841 = CARTESIAN_POINT('',(0.6,6.666666666667E-002,0.E+000)); +#842 = VERTEX_POINT('',#843); +#843 = CARTESIAN_POINT('',(0.35,6.666666666667E-002,0.E+000)); +#844 = LINE('',#845,#846); +#845 = CARTESIAN_POINT('',(0.6,6.666666666667E-002,0.E+000)); +#846 = VECTOR('',#847,1.); +#847 = DIRECTION('',(-1.,3.445092848398E-016,0.E+000)); +#848 = ORIENTED_EDGE('',*,*,#849,.T.); +#849 = EDGE_CURVE('',#840,#850,#852,.T.); +#850 = VERTEX_POINT('',#851); +#851 = CARTESIAN_POINT('',(0.6,6.666666666667E-002,0.2)); +#852 = LINE('',#853,#854); +#853 = CARTESIAN_POINT('',(0.6,6.666666666667E-002,0.E+000)); +#854 = VECTOR('',#855,1.); +#855 = DIRECTION('',(0.E+000,0.E+000,1.)); +#856 = ORIENTED_EDGE('',*,*,#857,.T.); +#857 = EDGE_CURVE('',#850,#484,#858,.T.); +#858 = LINE('',#859,#860); +#859 = CARTESIAN_POINT('',(0.6,6.666666666667E-002,0.2)); +#860 = VECTOR('',#861,1.); +#861 = DIRECTION('',(-1.,3.445092848398E-016,0.E+000)); +#862 = ORIENTED_EDGE('',*,*,#491,.T.); +#863 = ORIENTED_EDGE('',*,*,#375,.F.); +#864 = ORIENTED_EDGE('',*,*,#865,.F.); +#865 = EDGE_CURVE('',#842,#368,#866,.T.); +#866 = LINE('',#867,#868); +#867 = CARTESIAN_POINT('',(0.35,6.666666666667E-002,0.E+000)); +#868 = VECTOR('',#869,1.); +#869 = DIRECTION('',(0.E+000,0.E+000,1.)); +#870 = PLANE('',#871); +#871 = AXIS2_PLACEMENT_3D('',#872,#873,#874); +#872 = CARTESIAN_POINT('',(0.6,6.666666666667E-002,0.E+000)); +#873 = DIRECTION('',(-3.445092848398E-016,-1.,0.E+000)); +#874 = DIRECTION('',(-1.,3.445092848398E-016,0.E+000)); +#875 = ADVANCED_FACE('',(#876),#894,.F.); +#876 = FACE_BOUND('',#877,.F.); +#877 = EDGE_LOOP('',(#878,#886,#887,#888)); +#878 = ORIENTED_EDGE('',*,*,#879,.F.); +#879 = EDGE_CURVE('',#842,#880,#882,.T.); +#880 = VERTEX_POINT('',#881); +#881 = CARTESIAN_POINT('',(0.35,-6.666666666667E-002,0.E+000)); +#882 = LINE('',#883,#884); +#883 = CARTESIAN_POINT('',(0.35,6.666666666667E-002,0.E+000)); +#884 = VECTOR('',#885,1.); +#885 = DIRECTION('',(-3.445092848398E-016,-1.,0.E+000)); +#886 = ORIENTED_EDGE('',*,*,#865,.T.); +#887 = ORIENTED_EDGE('',*,*,#367,.F.); +#888 = ORIENTED_EDGE('',*,*,#889,.F.); +#889 = EDGE_CURVE('',#880,#360,#890,.T.); +#890 = LINE('',#891,#892); +#891 = CARTESIAN_POINT('',(0.35,-6.666666666667E-002,0.E+000)); +#892 = VECTOR('',#893,1.); +#893 = DIRECTION('',(0.E+000,0.E+000,1.)); +#894 = PLANE('',#895); +#895 = AXIS2_PLACEMENT_3D('',#896,#897,#898); +#896 = CARTESIAN_POINT('',(0.35,6.666666666667E-002,0.E+000)); +#897 = DIRECTION('',(1.,-3.445092848398E-016,0.E+000)); +#898 = DIRECTION('',(-3.445092848398E-016,-1.,0.E+000)); +#899 = ADVANCED_FACE('',(#900),#934,.F.); +#900 = FACE_BOUND('',#901,.F.); +#901 = EDGE_LOOP('',(#902,#912,#918,#919,#920,#928)); +#902 = ORIENTED_EDGE('',*,*,#903,.F.); +#903 = EDGE_CURVE('',#904,#906,#908,.T.); +#904 = VERTEX_POINT('',#905); +#905 = CARTESIAN_POINT('',(-0.35,6.666666666667E-002,0.E+000)); +#906 = VERTEX_POINT('',#907); +#907 = CARTESIAN_POINT('',(-0.6,6.666666666667E-002,0.E+000)); +#908 = LINE('',#909,#910); +#909 = CARTESIAN_POINT('',(-0.35,6.666666666667E-002,0.E+000)); +#910 = VECTOR('',#911,1.); +#911 = DIRECTION('',(-1.,4.669739647545E-016,0.E+000)); +#912 = ORIENTED_EDGE('',*,*,#913,.T.); +#913 = EDGE_CURVE('',#904,#248,#914,.T.); +#914 = LINE('',#915,#916); +#915 = CARTESIAN_POINT('',(-0.35,6.666666666667E-002,0.E+000)); +#916 = VECTOR('',#917,1.); +#917 = DIRECTION('',(0.E+000,0.E+000,1.)); +#918 = ORIENTED_EDGE('',*,*,#247,.F.); +#919 = ORIENTED_EDGE('',*,*,#648,.F.); +#920 = ORIENTED_EDGE('',*,*,#921,.T.); +#921 = EDGE_CURVE('',#641,#922,#924,.T.); +#922 = VERTEX_POINT('',#923); +#923 = CARTESIAN_POINT('',(-0.6,6.666666666667E-002,0.2)); +#924 = LINE('',#925,#926); +#925 = CARTESIAN_POINT('',(-0.35,6.666666666667E-002,0.2)); +#926 = VECTOR('',#927,1.); +#927 = DIRECTION('',(-1.,4.669739647545E-016,0.E+000)); +#928 = ORIENTED_EDGE('',*,*,#929,.F.); +#929 = EDGE_CURVE('',#906,#922,#930,.T.); +#930 = LINE('',#931,#932); +#931 = CARTESIAN_POINT('',(-0.6,6.666666666667E-002,0.E+000)); +#932 = VECTOR('',#933,1.); +#933 = DIRECTION('',(0.E+000,0.E+000,1.)); +#934 = PLANE('',#935); +#935 = AXIS2_PLACEMENT_3D('',#936,#937,#938); +#936 = CARTESIAN_POINT('',(-0.35,6.666666666667E-002,0.E+000)); +#937 = DIRECTION('',(-4.669739647545E-016,-1.,0.E+000)); +#938 = DIRECTION('',(-1.,4.669739647545E-016,0.E+000)); +#939 = ADVANCED_FACE('',(#940),#967,.F.); +#940 = FACE_BOUND('',#941,.F.); +#941 = EDGE_LOOP('',(#942,#950,#951,#952,#953,#961)); +#942 = ORIENTED_EDGE('',*,*,#943,.F.); +#943 = EDGE_CURVE('',#880,#944,#946,.T.); +#944 = VERTEX_POINT('',#945); +#945 = CARTESIAN_POINT('',(0.6,-6.666666666667E-002,0.E+000)); +#946 = LINE('',#947,#948); +#947 = CARTESIAN_POINT('',(0.35,-6.666666666667E-002,0.E+000)); +#948 = VECTOR('',#949,1.); +#949 = DIRECTION('',(1.,-3.445092848398E-016,0.E+000)); +#950 = ORIENTED_EDGE('',*,*,#889,.T.); +#951 = ORIENTED_EDGE('',*,*,#359,.F.); +#952 = ORIENTED_EDGE('',*,*,#475,.T.); +#953 = ORIENTED_EDGE('',*,*,#954,.T.); +#954 = EDGE_CURVE('',#476,#955,#957,.T.); +#955 = VERTEX_POINT('',#956); +#956 = CARTESIAN_POINT('',(0.6,-6.666666666667E-002,0.2)); +#957 = LINE('',#958,#959); +#958 = CARTESIAN_POINT('',(0.35,-6.666666666667E-002,0.2)); +#959 = VECTOR('',#960,1.); +#960 = DIRECTION('',(1.,-3.445092848398E-016,0.E+000)); +#961 = ORIENTED_EDGE('',*,*,#962,.F.); +#962 = EDGE_CURVE('',#944,#955,#963,.T.); +#963 = LINE('',#964,#965); +#964 = CARTESIAN_POINT('',(0.6,-6.666666666667E-002,0.E+000)); +#965 = VECTOR('',#966,1.); +#966 = DIRECTION('',(0.E+000,0.E+000,1.)); +#967 = PLANE('',#968); +#968 = AXIS2_PLACEMENT_3D('',#969,#970,#971); +#969 = CARTESIAN_POINT('',(0.35,-6.666666666667E-002,0.E+000)); +#970 = DIRECTION('',(3.445092848398E-016,1.,0.E+000)); +#971 = DIRECTION('',(1.,-3.445092848398E-016,0.E+000)); +#972 = ADVANCED_FACE('',(#973),#991,.F.); +#973 = FACE_BOUND('',#974,.F.); +#974 = EDGE_LOOP('',(#975,#983,#989,#990)); +#975 = ORIENTED_EDGE('',*,*,#976,.F.); +#976 = EDGE_CURVE('',#977,#904,#979,.T.); +#977 = VERTEX_POINT('',#978); +#978 = CARTESIAN_POINT('',(-0.35,-6.666666666667E-002,0.E+000)); +#979 = LINE('',#980,#981); +#980 = CARTESIAN_POINT('',(-0.35,-6.666666666667E-002,0.E+000)); +#981 = VECTOR('',#982,1.); +#982 = DIRECTION('',(4.669739647545E-016,1.,0.E+000)); +#983 = ORIENTED_EDGE('',*,*,#984,.T.); +#984 = EDGE_CURVE('',#977,#256,#985,.T.); +#985 = LINE('',#986,#987); +#986 = CARTESIAN_POINT('',(-0.35,-6.666666666667E-002,0.E+000)); +#987 = VECTOR('',#988,1.); +#988 = DIRECTION('',(0.E+000,0.E+000,1.)); +#989 = ORIENTED_EDGE('',*,*,#255,.F.); +#990 = ORIENTED_EDGE('',*,*,#913,.F.); +#991 = PLANE('',#992); +#992 = AXIS2_PLACEMENT_3D('',#993,#994,#995); +#993 = CARTESIAN_POINT('',(-0.35,-6.666666666667E-002,0.E+000)); +#994 = DIRECTION('',(-1.,4.669739647545E-016,0.E+000)); +#995 = DIRECTION('',(4.669739647545E-016,1.,0.E+000)); +#996 = ADVANCED_FACE('',(#997),#1024,.F.); +#997 = FACE_BOUND('',#998,.F.); +#998 = EDGE_LOOP('',(#999,#1007,#1015,#1021,#1022,#1023)); +#999 = ORIENTED_EDGE('',*,*,#1000,.F.); +#1000 = EDGE_CURVE('',#1001,#977,#1003,.T.); +#1001 = VERTEX_POINT('',#1002); +#1002 = CARTESIAN_POINT('',(-0.6,-6.666666666667E-002,0.E+000)); +#1003 = LINE('',#1004,#1005); +#1004 = CARTESIAN_POINT('',(-0.6,-6.666666666667E-002,0.E+000)); +#1005 = VECTOR('',#1006,1.); +#1006 = DIRECTION('',(1.,-4.669739647545E-016,0.E+000)); +#1007 = ORIENTED_EDGE('',*,*,#1008,.T.); +#1008 = EDGE_CURVE('',#1001,#1009,#1011,.T.); +#1009 = VERTEX_POINT('',#1010); +#1010 = CARTESIAN_POINT('',(-0.6,-6.666666666667E-002,0.2)); +#1011 = LINE('',#1012,#1013); +#1012 = CARTESIAN_POINT('',(-0.6,-6.666666666667E-002,0.E+000)); +#1013 = VECTOR('',#1014,1.); +#1014 = DIRECTION('',(0.E+000,0.E+000,1.)); +#1015 = ORIENTED_EDGE('',*,*,#1016,.T.); +#1016 = EDGE_CURVE('',#1009,#633,#1017,.T.); +#1017 = LINE('',#1018,#1019); +#1018 = CARTESIAN_POINT('',(-0.6,-6.666666666667E-002,0.2)); +#1019 = VECTOR('',#1020,1.); +#1020 = DIRECTION('',(1.,-4.669739647545E-016,0.E+000)); +#1021 = ORIENTED_EDGE('',*,*,#632,.F.); +#1022 = ORIENTED_EDGE('',*,*,#263,.F.); +#1023 = ORIENTED_EDGE('',*,*,#984,.F.); +#1024 = PLANE('',#1025); +#1025 = AXIS2_PLACEMENT_3D('',#1026,#1027,#1028); +#1026 = CARTESIAN_POINT('',(-0.6,-6.666666666667E-002,0.E+000)); +#1027 = DIRECTION('',(4.669739647545E-016,1.,0.E+000)); +#1028 = DIRECTION('',(1.,-4.669739647545E-016,0.E+000)); +#1029 = ADVANCED_FACE('',(#1030),#1064,.F.); +#1030 = FACE_BOUND('',#1031,.F.); +#1031 = EDGE_LOOP('',(#1032,#1042,#1050,#1056,#1057,#1058)); +#1032 = ORIENTED_EDGE('',*,*,#1033,.F.); +#1033 = EDGE_CURVE('',#1034,#1036,#1038,.T.); +#1034 = VERTEX_POINT('',#1035); +#1035 = CARTESIAN_POINT('',(0.6,-0.333333333333,0.E+000)); +#1036 = VERTEX_POINT('',#1037); +#1037 = CARTESIAN_POINT('',(0.35,-0.333333333333,0.E+000)); +#1038 = LINE('',#1039,#1040); +#1039 = CARTESIAN_POINT('',(0.6,-0.333333333333,0.E+000)); +#1040 = VECTOR('',#1041,1.); +#1041 = DIRECTION('',(-1.,3.445092848398E-016,0.E+000)); +#1042 = ORIENTED_EDGE('',*,*,#1043,.T.); +#1043 = EDGE_CURVE('',#1034,#1044,#1046,.T.); +#1044 = VERTEX_POINT('',#1045); +#1045 = CARTESIAN_POINT('',(0.6,-0.333333333333,0.2)); +#1046 = LINE('',#1047,#1048); +#1047 = CARTESIAN_POINT('',(0.6,-0.333333333333,0.E+000)); +#1048 = VECTOR('',#1049,1.); +#1049 = DIRECTION('',(0.E+000,0.E+000,1.)); +#1050 = ORIENTED_EDGE('',*,*,#1051,.T.); +#1051 = EDGE_CURVE('',#1044,#461,#1052,.T.); +#1052 = LINE('',#1053,#1054); +#1053 = CARTESIAN_POINT('',(0.6,-0.333333333333,0.2)); +#1054 = VECTOR('',#1055,1.); +#1055 = DIRECTION('',(-1.,3.445092848398E-016,0.E+000)); +#1056 = ORIENTED_EDGE('',*,*,#468,.T.); +#1057 = ORIENTED_EDGE('',*,*,#343,.F.); +#1058 = ORIENTED_EDGE('',*,*,#1059,.F.); +#1059 = EDGE_CURVE('',#1036,#336,#1060,.T.); +#1060 = LINE('',#1061,#1062); +#1061 = CARTESIAN_POINT('',(0.35,-0.333333333333,0.E+000)); +#1062 = VECTOR('',#1063,1.); +#1063 = DIRECTION('',(0.E+000,0.E+000,1.)); +#1064 = PLANE('',#1065); +#1065 = AXIS2_PLACEMENT_3D('',#1066,#1067,#1068); +#1066 = CARTESIAN_POINT('',(0.6,-0.333333333333,0.E+000)); +#1067 = DIRECTION('',(-3.445092848398E-016,-1.,0.E+000)); +#1068 = DIRECTION('',(-1.,3.445092848398E-016,0.E+000)); +#1069 = ADVANCED_FACE('',(#1070),#1088,.F.); +#1070 = FACE_BOUND('',#1071,.F.); +#1071 = EDGE_LOOP('',(#1072,#1080,#1081,#1082)); +#1072 = ORIENTED_EDGE('',*,*,#1073,.F.); +#1073 = EDGE_CURVE('',#1036,#1074,#1076,.T.); +#1074 = VERTEX_POINT('',#1075); +#1075 = CARTESIAN_POINT('',(0.35,-0.466666666667,0.E+000)); +#1076 = LINE('',#1077,#1078); +#1077 = CARTESIAN_POINT('',(0.35,-0.333333333333,0.E+000)); +#1078 = VECTOR('',#1079,1.); +#1079 = DIRECTION('',(-3.445092848398E-016,-1.,0.E+000)); +#1080 = ORIENTED_EDGE('',*,*,#1059,.T.); +#1081 = ORIENTED_EDGE('',*,*,#335,.F.); +#1082 = ORIENTED_EDGE('',*,*,#1083,.F.); +#1083 = EDGE_CURVE('',#1074,#328,#1084,.T.); +#1084 = LINE('',#1085,#1086); +#1085 = CARTESIAN_POINT('',(0.35,-0.466666666667,0.E+000)); +#1086 = VECTOR('',#1087,1.); +#1087 = DIRECTION('',(0.E+000,0.E+000,1.)); +#1088 = PLANE('',#1089); +#1089 = AXIS2_PLACEMENT_3D('',#1090,#1091,#1092); +#1090 = CARTESIAN_POINT('',(0.35,-0.333333333333,0.E+000)); +#1091 = DIRECTION('',(1.,-3.445092848398E-016,0.E+000)); +#1092 = DIRECTION('',(-3.445092848398E-016,-1.,0.E+000)); +#1093 = ADVANCED_FACE('',(#1094),#1128,.F.); +#1094 = FACE_BOUND('',#1095,.F.); +#1095 = EDGE_LOOP('',(#1096,#1106,#1112,#1113,#1114,#1122)); +#1096 = ORIENTED_EDGE('',*,*,#1097,.F.); +#1097 = EDGE_CURVE('',#1098,#1100,#1102,.T.); +#1098 = VERTEX_POINT('',#1099); +#1099 = CARTESIAN_POINT('',(-0.35,-0.333333333333,0.E+000)); +#1100 = VERTEX_POINT('',#1101); +#1101 = CARTESIAN_POINT('',(-0.6,-0.333333333333,0.E+000)); +#1102 = LINE('',#1103,#1104); +#1103 = CARTESIAN_POINT('',(-0.35,-0.333333333333,0.E+000)); +#1104 = VECTOR('',#1105,1.); +#1105 = DIRECTION('',(-1.,4.669739647545E-016,0.E+000)); +#1106 = ORIENTED_EDGE('',*,*,#1107,.T.); +#1107 = EDGE_CURVE('',#1098,#280,#1108,.T.); +#1108 = LINE('',#1109,#1110); +#1109 = CARTESIAN_POINT('',(-0.35,-0.333333333333,0.E+000)); +#1110 = VECTOR('',#1111,1.); +#1111 = DIRECTION('',(0.E+000,0.E+000,1.)); +#1112 = ORIENTED_EDGE('',*,*,#279,.F.); +#1113 = ORIENTED_EDGE('',*,*,#625,.F.); +#1114 = ORIENTED_EDGE('',*,*,#1115,.T.); +#1115 = EDGE_CURVE('',#618,#1116,#1118,.T.); +#1116 = VERTEX_POINT('',#1117); +#1117 = CARTESIAN_POINT('',(-0.6,-0.333333333333,0.2)); +#1118 = LINE('',#1119,#1120); +#1119 = CARTESIAN_POINT('',(-0.35,-0.333333333333,0.2)); +#1120 = VECTOR('',#1121,1.); +#1121 = DIRECTION('',(-1.,4.669739647545E-016,0.E+000)); +#1122 = ORIENTED_EDGE('',*,*,#1123,.F.); +#1123 = EDGE_CURVE('',#1100,#1116,#1124,.T.); +#1124 = LINE('',#1125,#1126); +#1125 = CARTESIAN_POINT('',(-0.6,-0.333333333333,0.E+000)); +#1126 = VECTOR('',#1127,1.); +#1127 = DIRECTION('',(0.E+000,0.E+000,1.)); +#1128 = PLANE('',#1129); +#1129 = AXIS2_PLACEMENT_3D('',#1130,#1131,#1132); +#1130 = CARTESIAN_POINT('',(-0.35,-0.333333333333,0.E+000)); +#1131 = DIRECTION('',(-4.669739647545E-016,-1.,0.E+000)); +#1132 = DIRECTION('',(-1.,4.669739647545E-016,0.E+000)); +#1133 = ADVANCED_FACE('',(#1134),#1161,.F.); +#1134 = FACE_BOUND('',#1135,.F.); +#1135 = EDGE_LOOP('',(#1136,#1144,#1145,#1146,#1147,#1155)); +#1136 = ORIENTED_EDGE('',*,*,#1137,.F.); +#1137 = EDGE_CURVE('',#1074,#1138,#1140,.T.); +#1138 = VERTEX_POINT('',#1139); +#1139 = CARTESIAN_POINT('',(0.6,-0.466666666667,0.E+000)); +#1140 = LINE('',#1141,#1142); +#1141 = CARTESIAN_POINT('',(0.35,-0.466666666667,0.E+000)); +#1142 = VECTOR('',#1143,1.); +#1143 = DIRECTION('',(1.,-3.445092848398E-016,0.E+000)); +#1144 = ORIENTED_EDGE('',*,*,#1083,.T.); +#1145 = ORIENTED_EDGE('',*,*,#327,.F.); +#1146 = ORIENTED_EDGE('',*,*,#452,.T.); +#1147 = ORIENTED_EDGE('',*,*,#1148,.T.); +#1148 = EDGE_CURVE('',#453,#1149,#1151,.T.); +#1149 = VERTEX_POINT('',#1150); +#1150 = CARTESIAN_POINT('',(0.6,-0.466666666667,0.2)); +#1151 = LINE('',#1152,#1153); +#1152 = CARTESIAN_POINT('',(0.35,-0.466666666667,0.2)); +#1153 = VECTOR('',#1154,1.); +#1154 = DIRECTION('',(1.,-3.445092848398E-016,0.E+000)); +#1155 = ORIENTED_EDGE('',*,*,#1156,.F.); +#1156 = EDGE_CURVE('',#1138,#1149,#1157,.T.); +#1157 = LINE('',#1158,#1159); +#1158 = CARTESIAN_POINT('',(0.6,-0.466666666667,0.E+000)); +#1159 = VECTOR('',#1160,1.); +#1160 = DIRECTION('',(0.E+000,0.E+000,1.)); +#1161 = PLANE('',#1162); +#1162 = AXIS2_PLACEMENT_3D('',#1163,#1164,#1165); +#1163 = CARTESIAN_POINT('',(0.35,-0.466666666667,0.E+000)); +#1164 = DIRECTION('',(3.445092848398E-016,1.,0.E+000)); +#1165 = DIRECTION('',(1.,-3.445092848398E-016,0.E+000)); +#1166 = ADVANCED_FACE('',(#1167),#1185,.F.); +#1167 = FACE_BOUND('',#1168,.F.); +#1168 = EDGE_LOOP('',(#1169,#1177,#1183,#1184)); +#1169 = ORIENTED_EDGE('',*,*,#1170,.F.); +#1170 = EDGE_CURVE('',#1171,#1098,#1173,.T.); +#1171 = VERTEX_POINT('',#1172); +#1172 = CARTESIAN_POINT('',(-0.35,-0.466666666667,0.E+000)); +#1173 = LINE('',#1174,#1175); +#1174 = CARTESIAN_POINT('',(-0.35,-0.466666666667,0.E+000)); +#1175 = VECTOR('',#1176,1.); +#1176 = DIRECTION('',(4.669739647545E-016,1.,0.E+000)); +#1177 = ORIENTED_EDGE('',*,*,#1178,.T.); +#1178 = EDGE_CURVE('',#1171,#288,#1179,.T.); +#1179 = LINE('',#1180,#1181); +#1180 = CARTESIAN_POINT('',(-0.35,-0.466666666667,0.E+000)); +#1181 = VECTOR('',#1182,1.); +#1182 = DIRECTION('',(0.E+000,0.E+000,1.)); +#1183 = ORIENTED_EDGE('',*,*,#287,.F.); +#1184 = ORIENTED_EDGE('',*,*,#1107,.F.); +#1185 = PLANE('',#1186); +#1186 = AXIS2_PLACEMENT_3D('',#1187,#1188,#1189); +#1187 = CARTESIAN_POINT('',(-0.35,-0.466666666667,0.E+000)); +#1188 = DIRECTION('',(-1.,4.669739647545E-016,0.E+000)); +#1189 = DIRECTION('',(4.669739647545E-016,1.,0.E+000)); +#1190 = ADVANCED_FACE('',(#1191),#1218,.F.); +#1191 = FACE_BOUND('',#1192,.F.); +#1192 = EDGE_LOOP('',(#1193,#1201,#1209,#1215,#1216,#1217)); +#1193 = ORIENTED_EDGE('',*,*,#1194,.F.); +#1194 = EDGE_CURVE('',#1195,#1171,#1197,.T.); +#1195 = VERTEX_POINT('',#1196); +#1196 = CARTESIAN_POINT('',(-0.6,-0.466666666667,0.E+000)); +#1197 = LINE('',#1198,#1199); +#1198 = CARTESIAN_POINT('',(-0.6,-0.466666666667,0.E+000)); +#1199 = VECTOR('',#1200,1.); +#1200 = DIRECTION('',(1.,-4.669739647545E-016,0.E+000)); +#1201 = ORIENTED_EDGE('',*,*,#1202,.T.); +#1202 = EDGE_CURVE('',#1195,#1203,#1205,.T.); +#1203 = VERTEX_POINT('',#1204); +#1204 = CARTESIAN_POINT('',(-0.6,-0.466666666667,0.2)); +#1205 = LINE('',#1206,#1207); +#1206 = CARTESIAN_POINT('',(-0.6,-0.466666666667,0.E+000)); +#1207 = VECTOR('',#1208,1.); +#1208 = DIRECTION('',(0.E+000,0.E+000,1.)); +#1209 = ORIENTED_EDGE('',*,*,#1210,.T.); +#1210 = EDGE_CURVE('',#1203,#610,#1211,.T.); +#1211 = LINE('',#1212,#1213); +#1212 = CARTESIAN_POINT('',(-0.6,-0.466666666667,0.2)); +#1213 = VECTOR('',#1214,1.); +#1214 = DIRECTION('',(1.,-4.669739647545E-016,0.E+000)); +#1215 = ORIENTED_EDGE('',*,*,#609,.F.); +#1216 = ORIENTED_EDGE('',*,*,#295,.F.); +#1217 = ORIENTED_EDGE('',*,*,#1178,.F.); +#1218 = PLANE('',#1219); +#1219 = AXIS2_PLACEMENT_3D('',#1220,#1221,#1222); +#1220 = CARTESIAN_POINT('',(-0.6,-0.466666666667,0.E+000)); +#1221 = DIRECTION('',(4.669739647545E-016,1.,0.E+000)); +#1222 = DIRECTION('',(1.,-4.669739647545E-016,0.E+000)); +#1223 = ADVANCED_FACE('',(#1224),#1235,.T.); +#1224 = FACE_BOUND('',#1225,.T.); +#1225 = EDGE_LOOP('',(#1226,#1227,#1228,#1229)); +#1226 = ORIENTED_EDGE('',*,*,#602,.F.); +#1227 = ORIENTED_EDGE('',*,*,#311,.T.); +#1228 = ORIENTED_EDGE('',*,*,#445,.T.); +#1229 = ORIENTED_EDGE('',*,*,#1230,.F.); +#1230 = EDGE_CURVE('',#595,#438,#1231,.T.); +#1231 = LINE('',#1232,#1233); +#1232 = CARTESIAN_POINT('',(-0.55,-0.55,0.4)); +#1233 = VECTOR('',#1234,1.); +#1234 = DIRECTION('',(1.,-2.22044604925E-016,0.E+000)); +#1235 = PLANE('',#1236); +#1236 = AXIS2_PLACEMENT_3D('',#1237,#1238,#1239); +#1237 = CARTESIAN_POINT('',(-0.55,-0.55,0.1)); +#1238 = DIRECTION('',(-2.22044604925E-016,-1.,0.E+000)); +#1239 = DIRECTION('',(0.E+000,0.E+000,1.)); +#1240 = ADVANCED_FACE('',(#1241,#1247),#1258,.T.); +#1241 = FACE_BOUND('',#1242,.T.); +#1242 = EDGE_LOOP('',(#1243,#1244,#1245,#1246)); +#1243 = ORIENTED_EDGE('',*,*,#538,.F.); +#1244 = ORIENTED_EDGE('',*,*,#594,.T.); +#1245 = ORIENTED_EDGE('',*,*,#1230,.T.); +#1246 = ORIENTED_EDGE('',*,*,#437,.F.); +#1247 = FACE_BOUND('',#1248,.T.); +#1248 = EDGE_LOOP('',(#1249)); +#1249 = ORIENTED_EDGE('',*,*,#1250,.T.); +#1250 = EDGE_CURVE('',#1251,#1251,#1253,.T.); +#1251 = VERTEX_POINT('',#1252); +#1252 = CARTESIAN_POINT('',(-0.45,0.4,0.4)); +#1253 = CIRCLE('',#1254,5.E-002); +#1254 = AXIS2_PLACEMENT_3D('',#1255,#1256,#1257); +#1255 = CARTESIAN_POINT('',(-0.45,0.45,0.4)); +#1256 = DIRECTION('',(-0.E+000,0.E+000,-1.)); +#1257 = DIRECTION('',(-2.22044604925E-016,-1.,0.E+000)); +#1258 = PLANE('',#1259); +#1259 = AXIS2_PLACEMENT_3D('',#1260,#1261,#1262); +#1260 = CARTESIAN_POINT('',(-0.55,0.55,0.4)); +#1261 = DIRECTION('',(0.E+000,0.E+000,1.)); +#1262 = DIRECTION('',(-2.22044604925E-016,-1.,0.E+000)); +#1263 = ADVANCED_FACE('',(#1264),#1275,.T.); +#1264 = FACE_BOUND('',#1265,.T.); +#1265 = EDGE_LOOP('',(#1266,#1272,#1273,#1274)); +#1266 = ORIENTED_EDGE('',*,*,#1267,.T.); +#1267 = EDGE_CURVE('',#761,#563,#1268,.T.); +#1268 = LINE('',#1269,#1270); +#1269 = CARTESIAN_POINT('',(0.6,0.333333333333,0.2)); +#1270 = VECTOR('',#1271,1.); +#1271 = DIRECTION('',(3.445092848398E-016,1.,0.E+000)); +#1272 = ORIENTED_EDGE('',*,*,#570,.T.); +#1273 = ORIENTED_EDGE('',*,*,#506,.T.); +#1274 = ORIENTED_EDGE('',*,*,#760,.T.); +#1275 = PLANE('',#1276); +#1276 = AXIS2_PLACEMENT_3D('',#1277,#1278,#1279); +#1277 = CARTESIAN_POINT('',(0.475,0.4,0.2)); +#1278 = DIRECTION('',(0.E+000,0.E+000,1.)); +#1279 = DIRECTION('',(3.445092848398E-016,1.,0.E+000)); +#1280 = ADVANCED_FACE('',(#1281),#1292,.T.); +#1281 = FACE_BOUND('',#1282,.T.); +#1282 = EDGE_LOOP('',(#1283,#1289,#1290,#1291)); +#1283 = ORIENTED_EDGE('',*,*,#1284,.T.); +#1284 = EDGE_CURVE('',#1149,#1044,#1285,.T.); +#1285 = LINE('',#1286,#1287); +#1286 = CARTESIAN_POINT('',(0.6,-0.466666666667,0.2)); +#1287 = VECTOR('',#1288,1.); +#1288 = DIRECTION('',(3.445092848398E-016,1.,0.E+000)); +#1289 = ORIENTED_EDGE('',*,*,#1051,.T.); +#1290 = ORIENTED_EDGE('',*,*,#460,.T.); +#1291 = ORIENTED_EDGE('',*,*,#1148,.T.); +#1292 = PLANE('',#1293); +#1293 = AXIS2_PLACEMENT_3D('',#1294,#1295,#1296); +#1294 = CARTESIAN_POINT('',(0.475,-0.4,0.2)); +#1295 = DIRECTION('',(0.E+000,0.E+000,1.)); +#1296 = DIRECTION('',(3.445092848398E-016,1.,0.E+000)); +#1297 = ADVANCED_FACE('',(#1298),#1309,.T.); +#1298 = FACE_BOUND('',#1299,.T.); +#1299 = EDGE_LOOP('',(#1300,#1306,#1307,#1308)); +#1300 = ORIENTED_EDGE('',*,*,#1301,.T.); +#1301 = EDGE_CURVE('',#955,#850,#1302,.T.); +#1302 = LINE('',#1303,#1304); +#1303 = CARTESIAN_POINT('',(0.6,-6.666666666667E-002,0.2)); +#1304 = VECTOR('',#1305,1.); +#1305 = DIRECTION('',(3.445092848398E-016,1.,0.E+000)); +#1306 = ORIENTED_EDGE('',*,*,#857,.T.); +#1307 = ORIENTED_EDGE('',*,*,#483,.T.); +#1308 = ORIENTED_EDGE('',*,*,#954,.T.); +#1309 = PLANE('',#1310); +#1310 = AXIS2_PLACEMENT_3D('',#1311,#1312,#1313); +#1311 = CARTESIAN_POINT('',(0.475,-9.71445146547E-017,0.2)); +#1312 = DIRECTION('',(0.E+000,0.E+000,1.)); +#1313 = DIRECTION('',(3.445092848398E-016,1.,0.E+000)); +#1314 = ADVANCED_FACE('',(#1315),#1326,.F.); +#1315 = FACE_BOUND('',#1316,.F.); +#1316 = EDGE_LOOP('',(#1317,#1318,#1319,#1320)); +#1317 = ORIENTED_EDGE('',*,*,#552,.T.); +#1318 = ORIENTED_EDGE('',*,*,#685,.T.); +#1319 = ORIENTED_EDGE('',*,*,#749,.T.); +#1320 = ORIENTED_EDGE('',*,*,#1321,.T.); +#1321 = EDGE_CURVE('',#750,#553,#1322,.T.); +#1322 = LINE('',#1323,#1324); +#1323 = CARTESIAN_POINT('',(0.6,0.333333333333,0.E+000)); +#1324 = VECTOR('',#1325,1.); +#1325 = DIRECTION('',(3.445092848398E-016,1.,0.E+000)); +#1326 = PLANE('',#1327); +#1327 = AXIS2_PLACEMENT_3D('',#1328,#1329,#1330); +#1328 = CARTESIAN_POINT('',(0.475,0.4,0.E+000)); +#1329 = DIRECTION('',(0.E+000,0.E+000,1.)); +#1330 = DIRECTION('',(3.445092848398E-016,1.,0.E+000)); +#1331 = ADVANCED_FACE('',(#1332),#1338,.F.); +#1332 = FACE_BOUND('',#1333,.F.); +#1333 = EDGE_LOOP('',(#1334,#1335,#1336,#1337)); +#1334 = ORIENTED_EDGE('',*,*,#768,.T.); +#1335 = ORIENTED_EDGE('',*,*,#1267,.T.); +#1336 = ORIENTED_EDGE('',*,*,#562,.F.); +#1337 = ORIENTED_EDGE('',*,*,#1321,.F.); +#1338 = PLANE('',#1339); +#1339 = AXIS2_PLACEMENT_3D('',#1340,#1341,#1342); +#1340 = CARTESIAN_POINT('',(0.6,0.333333333333,0.E+000)); +#1341 = DIRECTION('',(-1.,3.445092848398E-016,0.E+000)); +#1342 = DIRECTION('',(3.445092848398E-016,1.,0.E+000)); +#1343 = ADVANCED_FACE('',(#1344),#1355,.T.); +#1344 = FACE_BOUND('',#1345,.T.); +#1345 = EDGE_LOOP('',(#1346,#1352,#1353,#1354)); +#1346 = ORIENTED_EDGE('',*,*,#1347,.T.); +#1347 = EDGE_CURVE('',#728,#815,#1348,.T.); +#1348 = LINE('',#1349,#1350); +#1349 = CARTESIAN_POINT('',(-0.6,0.466666666667,0.2)); +#1350 = VECTOR('',#1351,1.); +#1351 = DIRECTION('',(-4.669739647545E-016,-1.,0.E+000)); +#1352 = ORIENTED_EDGE('',*,*,#822,.T.); +#1353 = ORIENTED_EDGE('',*,*,#663,.F.); +#1354 = ORIENTED_EDGE('',*,*,#727,.T.); +#1355 = PLANE('',#1356); +#1356 = AXIS2_PLACEMENT_3D('',#1357,#1358,#1359); +#1357 = CARTESIAN_POINT('',(-0.475,0.4,0.2)); +#1358 = DIRECTION('',(0.E+000,0.E+000,1.)); +#1359 = DIRECTION('',(-4.669739647545E-016,-1.,0.E+000)); +#1360 = ADVANCED_FACE('',(#1361),#1372,.T.); +#1361 = FACE_BOUND('',#1362,.T.); +#1362 = EDGE_LOOP('',(#1363,#1369,#1370,#1371)); +#1363 = ORIENTED_EDGE('',*,*,#1364,.T.); +#1364 = EDGE_CURVE('',#1116,#1203,#1365,.T.); +#1365 = LINE('',#1366,#1367); +#1366 = CARTESIAN_POINT('',(-0.6,-0.333333333333,0.2)); +#1367 = VECTOR('',#1368,1.); +#1368 = DIRECTION('',(-4.669739647545E-016,-1.,0.E+000)); +#1369 = ORIENTED_EDGE('',*,*,#1210,.T.); +#1370 = ORIENTED_EDGE('',*,*,#617,.F.); +#1371 = ORIENTED_EDGE('',*,*,#1115,.T.); +#1372 = PLANE('',#1373); +#1373 = AXIS2_PLACEMENT_3D('',#1374,#1375,#1376); +#1374 = CARTESIAN_POINT('',(-0.475,-0.4,0.2)); +#1375 = DIRECTION('',(0.E+000,0.E+000,1.)); +#1376 = DIRECTION('',(-4.669739647545E-016,-1.,0.E+000)); +#1377 = ADVANCED_FACE('',(#1378),#1389,.T.); +#1378 = FACE_BOUND('',#1379,.T.); +#1379 = EDGE_LOOP('',(#1380,#1386,#1387,#1388)); +#1380 = ORIENTED_EDGE('',*,*,#1381,.T.); +#1381 = EDGE_CURVE('',#922,#1009,#1382,.T.); +#1382 = LINE('',#1383,#1384); +#1383 = CARTESIAN_POINT('',(-0.6,6.666666666667E-002,0.2)); +#1384 = VECTOR('',#1385,1.); +#1385 = DIRECTION('',(-4.669739647545E-016,-1.,0.E+000)); +#1386 = ORIENTED_EDGE('',*,*,#1016,.T.); +#1387 = ORIENTED_EDGE('',*,*,#640,.F.); +#1388 = ORIENTED_EDGE('',*,*,#921,.T.); +#1389 = PLANE('',#1390); +#1390 = AXIS2_PLACEMENT_3D('',#1391,#1392,#1393); +#1391 = CARTESIAN_POINT('',(-0.475,1.52655665886E-016,0.2)); +#1392 = DIRECTION('',(0.E+000,0.E+000,1.)); +#1393 = DIRECTION('',(-4.669739647545E-016,-1.,0.E+000)); +#1394 = ADVANCED_FACE('',(#1395),#1406,.F.); +#1395 = FACE_BOUND('',#1396,.F.); +#1396 = EDGE_LOOP('',(#1397,#1398,#1399,#1400)); +#1397 = ORIENTED_EDGE('',*,*,#806,.T.); +#1398 = ORIENTED_EDGE('',*,*,#782,.T.); +#1399 = ORIENTED_EDGE('',*,*,#709,.T.); +#1400 = ORIENTED_EDGE('',*,*,#1401,.T.); +#1401 = EDGE_CURVE('',#712,#807,#1402,.T.); +#1402 = LINE('',#1403,#1404); +#1403 = CARTESIAN_POINT('',(-0.6,0.466666666667,0.E+000)); +#1404 = VECTOR('',#1405,1.); +#1405 = DIRECTION('',(-4.669739647545E-016,-1.,0.E+000)); +#1406 = PLANE('',#1407); +#1407 = AXIS2_PLACEMENT_3D('',#1408,#1409,#1410); +#1408 = CARTESIAN_POINT('',(-0.475,0.4,0.E+000)); +#1409 = DIRECTION('',(0.E+000,0.E+000,1.)); +#1410 = DIRECTION('',(-4.669739647545E-016,-1.,0.E+000)); +#1411 = ADVANCED_FACE('',(#1412),#1418,.F.); +#1412 = FACE_BOUND('',#1413,.F.); +#1413 = EDGE_LOOP('',(#1414,#1415,#1416,#1417)); +#1414 = ORIENTED_EDGE('',*,*,#735,.T.); +#1415 = ORIENTED_EDGE('',*,*,#1347,.T.); +#1416 = ORIENTED_EDGE('',*,*,#814,.F.); +#1417 = ORIENTED_EDGE('',*,*,#1401,.F.); +#1418 = PLANE('',#1419); +#1419 = AXIS2_PLACEMENT_3D('',#1420,#1421,#1422); +#1420 = CARTESIAN_POINT('',(-0.6,0.466666666667,0.E+000)); +#1421 = DIRECTION('',(1.,-4.669739647545E-016,0.E+000)); +#1422 = DIRECTION('',(-4.669739647545E-016,-1.,0.E+000)); +#1423 = ADVANCED_FACE('',(#1424),#1435,.F.); +#1424 = FACE_BOUND('',#1425,.F.); +#1425 = EDGE_LOOP('',(#1426,#1427,#1428,#1429)); +#1426 = ORIENTED_EDGE('',*,*,#839,.T.); +#1427 = ORIENTED_EDGE('',*,*,#879,.T.); +#1428 = ORIENTED_EDGE('',*,*,#943,.T.); +#1429 = ORIENTED_EDGE('',*,*,#1430,.T.); +#1430 = EDGE_CURVE('',#944,#840,#1431,.T.); +#1431 = LINE('',#1432,#1433); +#1432 = CARTESIAN_POINT('',(0.6,-6.666666666667E-002,0.E+000)); +#1433 = VECTOR('',#1434,1.); +#1434 = DIRECTION('',(3.445092848398E-016,1.,0.E+000)); +#1435 = PLANE('',#1436); +#1436 = AXIS2_PLACEMENT_3D('',#1437,#1438,#1439); +#1437 = CARTESIAN_POINT('',(0.475,-9.71445146547E-017,0.E+000)); +#1438 = DIRECTION('',(0.E+000,0.E+000,1.)); +#1439 = DIRECTION('',(3.445092848398E-016,1.,0.E+000)); +#1440 = ADVANCED_FACE('',(#1441),#1447,.F.); +#1441 = FACE_BOUND('',#1442,.F.); +#1442 = EDGE_LOOP('',(#1443,#1444,#1445,#1446)); +#1443 = ORIENTED_EDGE('',*,*,#962,.T.); +#1444 = ORIENTED_EDGE('',*,*,#1301,.T.); +#1445 = ORIENTED_EDGE('',*,*,#849,.F.); +#1446 = ORIENTED_EDGE('',*,*,#1430,.F.); +#1447 = PLANE('',#1448); +#1448 = AXIS2_PLACEMENT_3D('',#1449,#1450,#1451); +#1449 = CARTESIAN_POINT('',(0.6,-6.666666666667E-002,0.E+000)); +#1450 = DIRECTION('',(-1.,3.445092848398E-016,0.E+000)); +#1451 = DIRECTION('',(3.445092848398E-016,1.,0.E+000)); +#1452 = ADVANCED_FACE('',(#1453),#1464,.F.); +#1453 = FACE_BOUND('',#1454,.F.); +#1454 = EDGE_LOOP('',(#1455,#1456,#1457,#1458)); +#1455 = ORIENTED_EDGE('',*,*,#1000,.T.); +#1456 = ORIENTED_EDGE('',*,*,#976,.T.); +#1457 = ORIENTED_EDGE('',*,*,#903,.T.); +#1458 = ORIENTED_EDGE('',*,*,#1459,.T.); +#1459 = EDGE_CURVE('',#906,#1001,#1460,.T.); +#1460 = LINE('',#1461,#1462); +#1461 = CARTESIAN_POINT('',(-0.6,6.666666666667E-002,0.E+000)); +#1462 = VECTOR('',#1463,1.); +#1463 = DIRECTION('',(-4.669739647545E-016,-1.,0.E+000)); +#1464 = PLANE('',#1465); +#1465 = AXIS2_PLACEMENT_3D('',#1466,#1467,#1468); +#1466 = CARTESIAN_POINT('',(-0.475,1.52655665886E-016,0.E+000)); +#1467 = DIRECTION('',(0.E+000,0.E+000,1.)); +#1468 = DIRECTION('',(-4.669739647545E-016,-1.,0.E+000)); +#1469 = ADVANCED_FACE('',(#1470),#1476,.F.); +#1470 = FACE_BOUND('',#1471,.F.); +#1471 = EDGE_LOOP('',(#1472,#1473,#1474,#1475)); +#1472 = ORIENTED_EDGE('',*,*,#929,.T.); +#1473 = ORIENTED_EDGE('',*,*,#1381,.T.); +#1474 = ORIENTED_EDGE('',*,*,#1008,.F.); +#1475 = ORIENTED_EDGE('',*,*,#1459,.F.); +#1476 = PLANE('',#1477); +#1477 = AXIS2_PLACEMENT_3D('',#1478,#1479,#1480); +#1478 = CARTESIAN_POINT('',(-0.6,6.666666666667E-002,0.E+000)); +#1479 = DIRECTION('',(1.,-4.669739647545E-016,0.E+000)); +#1480 = DIRECTION('',(-4.669739647545E-016,-1.,0.E+000)); +#1481 = ADVANCED_FACE('',(#1482),#1493,.F.); +#1482 = FACE_BOUND('',#1483,.F.); +#1483 = EDGE_LOOP('',(#1484,#1485,#1486,#1487)); +#1484 = ORIENTED_EDGE('',*,*,#1033,.T.); +#1485 = ORIENTED_EDGE('',*,*,#1073,.T.); +#1486 = ORIENTED_EDGE('',*,*,#1137,.T.); +#1487 = ORIENTED_EDGE('',*,*,#1488,.T.); +#1488 = EDGE_CURVE('',#1138,#1034,#1489,.T.); +#1489 = LINE('',#1490,#1491); +#1490 = CARTESIAN_POINT('',(0.6,-0.466666666667,0.E+000)); +#1491 = VECTOR('',#1492,1.); +#1492 = DIRECTION('',(3.445092848398E-016,1.,0.E+000)); +#1493 = PLANE('',#1494); +#1494 = AXIS2_PLACEMENT_3D('',#1495,#1496,#1497); +#1495 = CARTESIAN_POINT('',(0.475,-0.4,0.E+000)); +#1496 = DIRECTION('',(0.E+000,0.E+000,1.)); +#1497 = DIRECTION('',(3.445092848398E-016,1.,0.E+000)); +#1498 = ADVANCED_FACE('',(#1499),#1505,.F.); +#1499 = FACE_BOUND('',#1500,.F.); +#1500 = EDGE_LOOP('',(#1501,#1502,#1503,#1504)); +#1501 = ORIENTED_EDGE('',*,*,#1156,.T.); +#1502 = ORIENTED_EDGE('',*,*,#1284,.T.); +#1503 = ORIENTED_EDGE('',*,*,#1043,.F.); +#1504 = ORIENTED_EDGE('',*,*,#1488,.F.); +#1505 = PLANE('',#1506); +#1506 = AXIS2_PLACEMENT_3D('',#1507,#1508,#1509); +#1507 = CARTESIAN_POINT('',(0.6,-0.466666666667,0.E+000)); +#1508 = DIRECTION('',(-1.,3.445092848398E-016,0.E+000)); +#1509 = DIRECTION('',(3.445092848398E-016,1.,0.E+000)); +#1510 = ADVANCED_FACE('',(#1511),#1522,.F.); +#1511 = FACE_BOUND('',#1512,.F.); +#1512 = EDGE_LOOP('',(#1513,#1514,#1515,#1516)); +#1513 = ORIENTED_EDGE('',*,*,#1194,.T.); +#1514 = ORIENTED_EDGE('',*,*,#1170,.T.); +#1515 = ORIENTED_EDGE('',*,*,#1097,.T.); +#1516 = ORIENTED_EDGE('',*,*,#1517,.T.); +#1517 = EDGE_CURVE('',#1100,#1195,#1518,.T.); +#1518 = LINE('',#1519,#1520); +#1519 = CARTESIAN_POINT('',(-0.6,-0.333333333333,0.E+000)); +#1520 = VECTOR('',#1521,1.); +#1521 = DIRECTION('',(-4.669739647545E-016,-1.,0.E+000)); +#1522 = PLANE('',#1523); +#1523 = AXIS2_PLACEMENT_3D('',#1524,#1525,#1526); +#1524 = CARTESIAN_POINT('',(-0.475,-0.4,0.E+000)); +#1525 = DIRECTION('',(0.E+000,0.E+000,1.)); +#1526 = DIRECTION('',(-4.669739647545E-016,-1.,0.E+000)); +#1527 = ADVANCED_FACE('',(#1528),#1534,.F.); +#1528 = FACE_BOUND('',#1529,.F.); +#1529 = EDGE_LOOP('',(#1530,#1531,#1532,#1533)); +#1530 = ORIENTED_EDGE('',*,*,#1123,.T.); +#1531 = ORIENTED_EDGE('',*,*,#1364,.T.); +#1532 = ORIENTED_EDGE('',*,*,#1202,.F.); +#1533 = ORIENTED_EDGE('',*,*,#1517,.F.); +#1534 = PLANE('',#1535); +#1535 = AXIS2_PLACEMENT_3D('',#1536,#1537,#1538); +#1536 = CARTESIAN_POINT('',(-0.6,-0.333333333333,0.E+000)); +#1537 = DIRECTION('',(1.,-4.669739647545E-016,0.E+000)); +#1538 = DIRECTION('',(-4.669739647545E-016,-1.,0.E+000)); +#1539 = ADVANCED_FACE('',(#1540),#1559,.F.); +#1540 = FACE_BOUND('',#1541,.T.); +#1541 = EDGE_LOOP('',(#1542,#1543,#1551,#1558)); +#1542 = ORIENTED_EDGE('',*,*,#1250,.F.); +#1543 = ORIENTED_EDGE('',*,*,#1544,.T.); +#1544 = EDGE_CURVE('',#1251,#1545,#1547,.T.); +#1545 = VERTEX_POINT('',#1546); +#1546 = CARTESIAN_POINT('',(-0.45,0.4,0.3)); +#1547 = LINE('',#1548,#1549); +#1548 = CARTESIAN_POINT('',(-0.45,0.4,0.5)); +#1549 = VECTOR('',#1550,1.); +#1550 = DIRECTION('',(-0.E+000,0.E+000,-1.)); +#1551 = ORIENTED_EDGE('',*,*,#1552,.F.); +#1552 = EDGE_CURVE('',#1545,#1545,#1553,.T.); +#1553 = CIRCLE('',#1554,5.E-002); +#1554 = AXIS2_PLACEMENT_3D('',#1555,#1556,#1557); +#1555 = CARTESIAN_POINT('',(-0.45,0.45,0.3)); +#1556 = DIRECTION('',(0.E+000,0.E+000,1.)); +#1557 = DIRECTION('',(-2.22044604925E-016,-1.,0.E+000)); +#1558 = ORIENTED_EDGE('',*,*,#1544,.F.); +#1559 = CYLINDRICAL_SURFACE('',#1560,5.E-002); +#1560 = AXIS2_PLACEMENT_3D('',#1561,#1562,#1563); +#1561 = CARTESIAN_POINT('',(-0.45,0.45,0.5)); +#1562 = DIRECTION('',(0.E+000,0.E+000,-1.)); +#1563 = DIRECTION('',(-2.22044604925E-016,-1.,0.E+000)); +#1564 = ADVANCED_FACE('',(#1565),#1568,.T.); +#1565 = FACE_BOUND('',#1566,.T.); +#1566 = EDGE_LOOP('',(#1567)); +#1567 = ORIENTED_EDGE('',*,*,#1552,.T.); +#1568 = PLANE('',#1569); +#1569 = AXIS2_PLACEMENT_3D('',#1570,#1571,#1572); +#1570 = CARTESIAN_POINT('',(-0.45,0.45,0.3)); +#1571 = DIRECTION('',(0.E+000,0.E+000,1.)); +#1572 = DIRECTION('',(-2.22044604925E-016,-1.,0.E+000)); +#1573 = ( GEOMETRIC_REPRESENTATION_CONTEXT(3) +GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((#1577)) +GLOBAL_UNIT_ASSIGNED_CONTEXT((#1574,#1575,#1576)) REPRESENTATION_CONTEXT +('Context #1','3D Context with UNIT and UNCERTAINTY') ); +#1574 = ( LENGTH_UNIT() NAMED_UNIT(*) SI_UNIT(.MILLI.,.METRE.) ); +#1575 = ( NAMED_UNIT(*) PLANE_ANGLE_UNIT() SI_UNIT($,.RADIAN.) ); +#1576 = ( NAMED_UNIT(*) SI_UNIT($,.STERADIAN.) SOLID_ANGLE_UNIT() ); +#1577 = UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(2.E-007),#1574, +'distance_accuracy_value','confusion accuracy'); +#1578 = PRODUCT_RELATED_PRODUCT_CATEGORY('part',$,(#7)); +#1579 = MECHANICAL_DESIGN_GEOMETRIC_PRESENTATION_REPRESENTATION('',( +#1580,#1588,#1595,#1602,#1609,#1616,#1623,#1631,#1638,#1645,#1652, +#1659,#1666,#1673,#1680,#1687,#1694,#1701,#1708,#1715,#1722,#1729, +#1736,#1743,#1750,#1757,#1764,#1771,#1778,#1785,#1792,#1799,#1806, +#1813,#1820,#1827,#1834,#1841,#1848,#1855,#1862,#1869,#1876,#1883, +#1890,#1897,#1904,#1911,#1918,#1926),#1573); +#1580 = STYLED_ITEM('color',(#1581),#17); +#1581 = PRESENTATION_STYLE_ASSIGNMENT((#1582)); +#1582 = SURFACE_STYLE_USAGE(.BOTH.,#1583); +#1583 = SURFACE_SIDE_STYLE('',(#1584)); +#1584 = SURFACE_STYLE_FILL_AREA(#1585); +#1585 = FILL_AREA_STYLE('',(#1586)); +#1586 = FILL_AREA_STYLE_COLOUR('',#1587); +#1587 = COLOUR_RGB('',0.824000000954,0.819999992847,0.78100001812); +#1588 = STYLED_ITEM('color',(#1589),#65); +#1589 = PRESENTATION_STYLE_ASSIGNMENT((#1590)); +#1590 = SURFACE_STYLE_USAGE(.BOTH.,#1591); +#1591 = SURFACE_SIDE_STYLE('',(#1592)); +#1592 = SURFACE_STYLE_FILL_AREA(#1593); +#1593 = FILL_AREA_STYLE('',(#1594)); +#1594 = FILL_AREA_STYLE_COLOUR('',#1587); +#1595 = STYLED_ITEM('color',(#1596),#96); +#1596 = PRESENTATION_STYLE_ASSIGNMENT((#1597)); +#1597 = SURFACE_STYLE_USAGE(.BOTH.,#1598); +#1598 = SURFACE_SIDE_STYLE('',(#1599)); +#1599 = SURFACE_STYLE_FILL_AREA(#1600); +#1600 = FILL_AREA_STYLE('',(#1601)); +#1601 = FILL_AREA_STYLE_COLOUR('',#1587); +#1602 = STYLED_ITEM('color',(#1603),#120); +#1603 = PRESENTATION_STYLE_ASSIGNMENT((#1604)); +#1604 = SURFACE_STYLE_USAGE(.BOTH.,#1605); +#1605 = SURFACE_SIDE_STYLE('',(#1606)); +#1606 = SURFACE_STYLE_FILL_AREA(#1607); +#1607 = FILL_AREA_STYLE('',(#1608)); +#1608 = FILL_AREA_STYLE_COLOUR('',#1587); +#1609 = STYLED_ITEM('color',(#1610),#144); +#1610 = PRESENTATION_STYLE_ASSIGNMENT((#1611)); +#1611 = SURFACE_STYLE_USAGE(.BOTH.,#1612); +#1612 = SURFACE_SIDE_STYLE('',(#1613)); +#1613 = SURFACE_STYLE_FILL_AREA(#1614); +#1614 = FILL_AREA_STYLE('',(#1615)); +#1615 = FILL_AREA_STYLE_COLOUR('',#1587); +#1616 = STYLED_ITEM('color',(#1617),#168); +#1617 = PRESENTATION_STYLE_ASSIGNMENT((#1618)); +#1618 = SURFACE_STYLE_USAGE(.BOTH.,#1619); +#1619 = SURFACE_SIDE_STYLE('',(#1620)); +#1620 = SURFACE_STYLE_FILL_AREA(#1621); +#1621 = FILL_AREA_STYLE('',(#1622)); +#1622 = FILL_AREA_STYLE_COLOUR('',#1587); +#1623 = STYLED_ITEM('color',(#1624),#185); +#1624 = PRESENTATION_STYLE_ASSIGNMENT((#1625)); +#1625 = SURFACE_STYLE_USAGE(.BOTH.,#1626); +#1626 = SURFACE_SIDE_STYLE('',(#1627)); +#1627 = SURFACE_STYLE_FILL_AREA(#1628); +#1628 = FILL_AREA_STYLE('',(#1629)); +#1629 = FILL_AREA_STYLE_COLOUR('',#1630); +#1630 = COLOUR_RGB('',0.148000001907,0.144999995828,0.144999995828); +#1631 = STYLED_ITEM('color',(#1632),#424); +#1632 = PRESENTATION_STYLE_ASSIGNMENT((#1633)); +#1633 = SURFACE_STYLE_USAGE(.BOTH.,#1634); +#1634 = SURFACE_SIDE_STYLE('',(#1635)); +#1635 = SURFACE_STYLE_FILL_AREA(#1636); +#1636 = FILL_AREA_STYLE('',(#1637)); +#1637 = FILL_AREA_STYLE_COLOUR('',#1630); +#1638 = STYLED_ITEM('color',(#1639),#524); +#1639 = PRESENTATION_STYLE_ASSIGNMENT((#1640)); +#1640 = SURFACE_STYLE_USAGE(.BOTH.,#1641); +#1641 = SURFACE_SIDE_STYLE('',(#1642)); +#1642 = SURFACE_STYLE_FILL_AREA(#1643); +#1643 = FILL_AREA_STYLE('',(#1644)); +#1644 = FILL_AREA_STYLE_COLOUR('',#1630); +#1645 = STYLED_ITEM('color',(#1646),#548); +#1646 = PRESENTATION_STYLE_ASSIGNMENT((#1647)); +#1647 = SURFACE_STYLE_USAGE(.BOTH.,#1648); +#1648 = SURFACE_SIDE_STYLE('',(#1649)); +#1649 = SURFACE_STYLE_FILL_AREA(#1650); +#1650 = FILL_AREA_STYLE('',(#1651)); +#1651 = FILL_AREA_STYLE_COLOUR('',#1587); +#1652 = STYLED_ITEM('color',(#1653),#588); +#1653 = PRESENTATION_STYLE_ASSIGNMENT((#1654)); +#1654 = SURFACE_STYLE_USAGE(.BOTH.,#1655); +#1655 = SURFACE_SIDE_STYLE('',(#1656)); +#1656 = SURFACE_STYLE_FILL_AREA(#1657); +#1657 = FILL_AREA_STYLE('',(#1658)); +#1658 = FILL_AREA_STYLE_COLOUR('',#1630); +#1659 = STYLED_ITEM('color',(#1660),#681); +#1660 = PRESENTATION_STYLE_ASSIGNMENT((#1661)); +#1661 = SURFACE_STYLE_USAGE(.BOTH.,#1662); +#1662 = SURFACE_SIDE_STYLE('',(#1663)); +#1663 = SURFACE_STYLE_FILL_AREA(#1664); +#1664 = FILL_AREA_STYLE('',(#1665)); +#1665 = FILL_AREA_STYLE_COLOUR('',#1587); +#1666 = STYLED_ITEM('color',(#1667),#705); +#1667 = PRESENTATION_STYLE_ASSIGNMENT((#1668)); +#1668 = SURFACE_STYLE_USAGE(.BOTH.,#1669); +#1669 = SURFACE_SIDE_STYLE('',(#1670)); +#1670 = SURFACE_STYLE_FILL_AREA(#1671); +#1671 = FILL_AREA_STYLE('',(#1672)); +#1672 = FILL_AREA_STYLE_COLOUR('',#1587); +#1673 = STYLED_ITEM('color',(#1674),#745); +#1674 = PRESENTATION_STYLE_ASSIGNMENT((#1675)); +#1675 = SURFACE_STYLE_USAGE(.BOTH.,#1676); +#1676 = SURFACE_SIDE_STYLE('',(#1677)); +#1677 = SURFACE_STYLE_FILL_AREA(#1678); +#1678 = FILL_AREA_STYLE('',(#1679)); +#1679 = FILL_AREA_STYLE_COLOUR('',#1587); +#1680 = STYLED_ITEM('color',(#1681),#778); +#1681 = PRESENTATION_STYLE_ASSIGNMENT((#1682)); +#1682 = SURFACE_STYLE_USAGE(.BOTH.,#1683); +#1683 = SURFACE_SIDE_STYLE('',(#1684)); +#1684 = SURFACE_STYLE_FILL_AREA(#1685); +#1685 = FILL_AREA_STYLE('',(#1686)); +#1686 = FILL_AREA_STYLE_COLOUR('',#1587); +#1687 = STYLED_ITEM('color',(#1688),#802); +#1688 = PRESENTATION_STYLE_ASSIGNMENT((#1689)); +#1689 = SURFACE_STYLE_USAGE(.BOTH.,#1690); +#1690 = SURFACE_SIDE_STYLE('',(#1691)); +#1691 = SURFACE_STYLE_FILL_AREA(#1692); +#1692 = FILL_AREA_STYLE('',(#1693)); +#1693 = FILL_AREA_STYLE_COLOUR('',#1587); +#1694 = STYLED_ITEM('color',(#1695),#835); +#1695 = PRESENTATION_STYLE_ASSIGNMENT((#1696)); +#1696 = SURFACE_STYLE_USAGE(.BOTH.,#1697); +#1697 = SURFACE_SIDE_STYLE('',(#1698)); +#1698 = SURFACE_STYLE_FILL_AREA(#1699); +#1699 = FILL_AREA_STYLE('',(#1700)); +#1700 = FILL_AREA_STYLE_COLOUR('',#1587); +#1701 = STYLED_ITEM('color',(#1702),#875); +#1702 = PRESENTATION_STYLE_ASSIGNMENT((#1703)); +#1703 = SURFACE_STYLE_USAGE(.BOTH.,#1704); +#1704 = SURFACE_SIDE_STYLE('',(#1705)); +#1705 = SURFACE_STYLE_FILL_AREA(#1706); +#1706 = FILL_AREA_STYLE('',(#1707)); +#1707 = FILL_AREA_STYLE_COLOUR('',#1587); +#1708 = STYLED_ITEM('color',(#1709),#899); +#1709 = PRESENTATION_STYLE_ASSIGNMENT((#1710)); +#1710 = SURFACE_STYLE_USAGE(.BOTH.,#1711); +#1711 = SURFACE_SIDE_STYLE('',(#1712)); +#1712 = SURFACE_STYLE_FILL_AREA(#1713); +#1713 = FILL_AREA_STYLE('',(#1714)); +#1714 = FILL_AREA_STYLE_COLOUR('',#1587); +#1715 = STYLED_ITEM('color',(#1716),#939); +#1716 = PRESENTATION_STYLE_ASSIGNMENT((#1717)); +#1717 = SURFACE_STYLE_USAGE(.BOTH.,#1718); +#1718 = SURFACE_SIDE_STYLE('',(#1719)); +#1719 = SURFACE_STYLE_FILL_AREA(#1720); +#1720 = FILL_AREA_STYLE('',(#1721)); +#1721 = FILL_AREA_STYLE_COLOUR('',#1587); +#1722 = STYLED_ITEM('color',(#1723),#972); +#1723 = PRESENTATION_STYLE_ASSIGNMENT((#1724)); +#1724 = SURFACE_STYLE_USAGE(.BOTH.,#1725); +#1725 = SURFACE_SIDE_STYLE('',(#1726)); +#1726 = SURFACE_STYLE_FILL_AREA(#1727); +#1727 = FILL_AREA_STYLE('',(#1728)); +#1728 = FILL_AREA_STYLE_COLOUR('',#1587); +#1729 = STYLED_ITEM('color',(#1730),#996); +#1730 = PRESENTATION_STYLE_ASSIGNMENT((#1731)); +#1731 = SURFACE_STYLE_USAGE(.BOTH.,#1732); +#1732 = SURFACE_SIDE_STYLE('',(#1733)); +#1733 = SURFACE_STYLE_FILL_AREA(#1734); +#1734 = FILL_AREA_STYLE('',(#1735)); +#1735 = FILL_AREA_STYLE_COLOUR('',#1587); +#1736 = STYLED_ITEM('color',(#1737),#1029); +#1737 = PRESENTATION_STYLE_ASSIGNMENT((#1738)); +#1738 = SURFACE_STYLE_USAGE(.BOTH.,#1739); +#1739 = SURFACE_SIDE_STYLE('',(#1740)); +#1740 = SURFACE_STYLE_FILL_AREA(#1741); +#1741 = FILL_AREA_STYLE('',(#1742)); +#1742 = FILL_AREA_STYLE_COLOUR('',#1587); +#1743 = STYLED_ITEM('color',(#1744),#1069); +#1744 = PRESENTATION_STYLE_ASSIGNMENT((#1745)); +#1745 = SURFACE_STYLE_USAGE(.BOTH.,#1746); +#1746 = SURFACE_SIDE_STYLE('',(#1747)); +#1747 = SURFACE_STYLE_FILL_AREA(#1748); +#1748 = FILL_AREA_STYLE('',(#1749)); +#1749 = FILL_AREA_STYLE_COLOUR('',#1587); +#1750 = STYLED_ITEM('color',(#1751),#1093); +#1751 = PRESENTATION_STYLE_ASSIGNMENT((#1752)); +#1752 = SURFACE_STYLE_USAGE(.BOTH.,#1753); +#1753 = SURFACE_SIDE_STYLE('',(#1754)); +#1754 = SURFACE_STYLE_FILL_AREA(#1755); +#1755 = FILL_AREA_STYLE('',(#1756)); +#1756 = FILL_AREA_STYLE_COLOUR('',#1587); +#1757 = STYLED_ITEM('color',(#1758),#1133); +#1758 = PRESENTATION_STYLE_ASSIGNMENT((#1759)); +#1759 = SURFACE_STYLE_USAGE(.BOTH.,#1760); +#1760 = SURFACE_SIDE_STYLE('',(#1761)); +#1761 = SURFACE_STYLE_FILL_AREA(#1762); +#1762 = FILL_AREA_STYLE('',(#1763)); +#1763 = FILL_AREA_STYLE_COLOUR('',#1587); +#1764 = STYLED_ITEM('color',(#1765),#1166); +#1765 = PRESENTATION_STYLE_ASSIGNMENT((#1766)); +#1766 = SURFACE_STYLE_USAGE(.BOTH.,#1767); +#1767 = SURFACE_SIDE_STYLE('',(#1768)); +#1768 = SURFACE_STYLE_FILL_AREA(#1769); +#1769 = FILL_AREA_STYLE('',(#1770)); +#1770 = FILL_AREA_STYLE_COLOUR('',#1587); +#1771 = STYLED_ITEM('color',(#1772),#1190); +#1772 = PRESENTATION_STYLE_ASSIGNMENT((#1773)); +#1773 = SURFACE_STYLE_USAGE(.BOTH.,#1774); +#1774 = SURFACE_SIDE_STYLE('',(#1775)); +#1775 = SURFACE_STYLE_FILL_AREA(#1776); +#1776 = FILL_AREA_STYLE('',(#1777)); +#1777 = FILL_AREA_STYLE_COLOUR('',#1587); +#1778 = STYLED_ITEM('color',(#1779),#1223); +#1779 = PRESENTATION_STYLE_ASSIGNMENT((#1780)); +#1780 = SURFACE_STYLE_USAGE(.BOTH.,#1781); +#1781 = SURFACE_SIDE_STYLE('',(#1782)); +#1782 = SURFACE_STYLE_FILL_AREA(#1783); +#1783 = FILL_AREA_STYLE('',(#1784)); +#1784 = FILL_AREA_STYLE_COLOUR('',#1630); +#1785 = STYLED_ITEM('color',(#1786),#1240); +#1786 = PRESENTATION_STYLE_ASSIGNMENT((#1787)); +#1787 = SURFACE_STYLE_USAGE(.BOTH.,#1788); +#1788 = SURFACE_SIDE_STYLE('',(#1789)); +#1789 = SURFACE_STYLE_FILL_AREA(#1790); +#1790 = FILL_AREA_STYLE('',(#1791)); +#1791 = FILL_AREA_STYLE_COLOUR('',#1630); +#1792 = STYLED_ITEM('color',(#1793),#1263); +#1793 = PRESENTATION_STYLE_ASSIGNMENT((#1794)); +#1794 = SURFACE_STYLE_USAGE(.BOTH.,#1795); +#1795 = SURFACE_SIDE_STYLE('',(#1796)); +#1796 = SURFACE_STYLE_FILL_AREA(#1797); +#1797 = FILL_AREA_STYLE('',(#1798)); +#1798 = FILL_AREA_STYLE_COLOUR('',#1587); +#1799 = STYLED_ITEM('color',(#1800),#1280); +#1800 = PRESENTATION_STYLE_ASSIGNMENT((#1801)); +#1801 = SURFACE_STYLE_USAGE(.BOTH.,#1802); +#1802 = SURFACE_SIDE_STYLE('',(#1803)); +#1803 = SURFACE_STYLE_FILL_AREA(#1804); +#1804 = FILL_AREA_STYLE('',(#1805)); +#1805 = FILL_AREA_STYLE_COLOUR('',#1587); +#1806 = STYLED_ITEM('color',(#1807),#1297); +#1807 = PRESENTATION_STYLE_ASSIGNMENT((#1808)); +#1808 = SURFACE_STYLE_USAGE(.BOTH.,#1809); +#1809 = SURFACE_SIDE_STYLE('',(#1810)); +#1810 = SURFACE_STYLE_FILL_AREA(#1811); +#1811 = FILL_AREA_STYLE('',(#1812)); +#1812 = FILL_AREA_STYLE_COLOUR('',#1587); +#1813 = STYLED_ITEM('color',(#1814),#1314); +#1814 = PRESENTATION_STYLE_ASSIGNMENT((#1815)); +#1815 = SURFACE_STYLE_USAGE(.BOTH.,#1816); +#1816 = SURFACE_SIDE_STYLE('',(#1817)); +#1817 = SURFACE_STYLE_FILL_AREA(#1818); +#1818 = FILL_AREA_STYLE('',(#1819)); +#1819 = FILL_AREA_STYLE_COLOUR('',#1587); +#1820 = STYLED_ITEM('color',(#1821),#1331); +#1821 = PRESENTATION_STYLE_ASSIGNMENT((#1822)); +#1822 = SURFACE_STYLE_USAGE(.BOTH.,#1823); +#1823 = SURFACE_SIDE_STYLE('',(#1824)); +#1824 = SURFACE_STYLE_FILL_AREA(#1825); +#1825 = FILL_AREA_STYLE('',(#1826)); +#1826 = FILL_AREA_STYLE_COLOUR('',#1587); +#1827 = STYLED_ITEM('color',(#1828),#1343); +#1828 = PRESENTATION_STYLE_ASSIGNMENT((#1829)); +#1829 = SURFACE_STYLE_USAGE(.BOTH.,#1830); +#1830 = SURFACE_SIDE_STYLE('',(#1831)); +#1831 = SURFACE_STYLE_FILL_AREA(#1832); +#1832 = FILL_AREA_STYLE('',(#1833)); +#1833 = FILL_AREA_STYLE_COLOUR('',#1587); +#1834 = STYLED_ITEM('color',(#1835),#1360); +#1835 = PRESENTATION_STYLE_ASSIGNMENT((#1836)); +#1836 = SURFACE_STYLE_USAGE(.BOTH.,#1837); +#1837 = SURFACE_SIDE_STYLE('',(#1838)); +#1838 = SURFACE_STYLE_FILL_AREA(#1839); +#1839 = FILL_AREA_STYLE('',(#1840)); +#1840 = FILL_AREA_STYLE_COLOUR('',#1587); +#1841 = STYLED_ITEM('color',(#1842),#1377); +#1842 = PRESENTATION_STYLE_ASSIGNMENT((#1843)); +#1843 = SURFACE_STYLE_USAGE(.BOTH.,#1844); +#1844 = SURFACE_SIDE_STYLE('',(#1845)); +#1845 = SURFACE_STYLE_FILL_AREA(#1846); +#1846 = FILL_AREA_STYLE('',(#1847)); +#1847 = FILL_AREA_STYLE_COLOUR('',#1587); +#1848 = STYLED_ITEM('color',(#1849),#1394); +#1849 = PRESENTATION_STYLE_ASSIGNMENT((#1850)); +#1850 = SURFACE_STYLE_USAGE(.BOTH.,#1851); +#1851 = SURFACE_SIDE_STYLE('',(#1852)); +#1852 = SURFACE_STYLE_FILL_AREA(#1853); +#1853 = FILL_AREA_STYLE('',(#1854)); +#1854 = FILL_AREA_STYLE_COLOUR('',#1587); +#1855 = STYLED_ITEM('color',(#1856),#1411); +#1856 = PRESENTATION_STYLE_ASSIGNMENT((#1857)); +#1857 = SURFACE_STYLE_USAGE(.BOTH.,#1858); +#1858 = SURFACE_SIDE_STYLE('',(#1859)); +#1859 = SURFACE_STYLE_FILL_AREA(#1860); +#1860 = FILL_AREA_STYLE('',(#1861)); +#1861 = FILL_AREA_STYLE_COLOUR('',#1587); +#1862 = STYLED_ITEM('color',(#1863),#1423); +#1863 = PRESENTATION_STYLE_ASSIGNMENT((#1864)); +#1864 = SURFACE_STYLE_USAGE(.BOTH.,#1865); +#1865 = SURFACE_SIDE_STYLE('',(#1866)); +#1866 = SURFACE_STYLE_FILL_AREA(#1867); +#1867 = FILL_AREA_STYLE('',(#1868)); +#1868 = FILL_AREA_STYLE_COLOUR('',#1587); +#1869 = STYLED_ITEM('color',(#1870),#1440); +#1870 = PRESENTATION_STYLE_ASSIGNMENT((#1871)); +#1871 = SURFACE_STYLE_USAGE(.BOTH.,#1872); +#1872 = SURFACE_SIDE_STYLE('',(#1873)); +#1873 = SURFACE_STYLE_FILL_AREA(#1874); +#1874 = FILL_AREA_STYLE('',(#1875)); +#1875 = FILL_AREA_STYLE_COLOUR('',#1587); +#1876 = STYLED_ITEM('color',(#1877),#1452); +#1877 = PRESENTATION_STYLE_ASSIGNMENT((#1878)); +#1878 = SURFACE_STYLE_USAGE(.BOTH.,#1879); +#1879 = SURFACE_SIDE_STYLE('',(#1880)); +#1880 = SURFACE_STYLE_FILL_AREA(#1881); +#1881 = FILL_AREA_STYLE('',(#1882)); +#1882 = FILL_AREA_STYLE_COLOUR('',#1587); +#1883 = STYLED_ITEM('color',(#1884),#1469); +#1884 = PRESENTATION_STYLE_ASSIGNMENT((#1885)); +#1885 = SURFACE_STYLE_USAGE(.BOTH.,#1886); +#1886 = SURFACE_SIDE_STYLE('',(#1887)); +#1887 = SURFACE_STYLE_FILL_AREA(#1888); +#1888 = FILL_AREA_STYLE('',(#1889)); +#1889 = FILL_AREA_STYLE_COLOUR('',#1587); +#1890 = STYLED_ITEM('color',(#1891),#1481); +#1891 = PRESENTATION_STYLE_ASSIGNMENT((#1892)); +#1892 = SURFACE_STYLE_USAGE(.BOTH.,#1893); +#1893 = SURFACE_SIDE_STYLE('',(#1894)); +#1894 = SURFACE_STYLE_FILL_AREA(#1895); +#1895 = FILL_AREA_STYLE('',(#1896)); +#1896 = FILL_AREA_STYLE_COLOUR('',#1587); +#1897 = STYLED_ITEM('color',(#1898),#1498); +#1898 = PRESENTATION_STYLE_ASSIGNMENT((#1899)); +#1899 = SURFACE_STYLE_USAGE(.BOTH.,#1900); +#1900 = SURFACE_SIDE_STYLE('',(#1901)); +#1901 = SURFACE_STYLE_FILL_AREA(#1902); +#1902 = FILL_AREA_STYLE('',(#1903)); +#1903 = FILL_AREA_STYLE_COLOUR('',#1587); +#1904 = STYLED_ITEM('color',(#1905),#1510); +#1905 = PRESENTATION_STYLE_ASSIGNMENT((#1906)); +#1906 = SURFACE_STYLE_USAGE(.BOTH.,#1907); +#1907 = SURFACE_SIDE_STYLE('',(#1908)); +#1908 = SURFACE_STYLE_FILL_AREA(#1909); +#1909 = FILL_AREA_STYLE('',(#1910)); +#1910 = FILL_AREA_STYLE_COLOUR('',#1587); +#1911 = STYLED_ITEM('color',(#1912),#1527); +#1912 = PRESENTATION_STYLE_ASSIGNMENT((#1913)); +#1913 = SURFACE_STYLE_USAGE(.BOTH.,#1914); +#1914 = SURFACE_SIDE_STYLE('',(#1915)); +#1915 = SURFACE_STYLE_FILL_AREA(#1916); +#1916 = FILL_AREA_STYLE('',(#1917)); +#1917 = FILL_AREA_STYLE_COLOUR('',#1587); +#1918 = STYLED_ITEM('color',(#1919),#1539); +#1919 = PRESENTATION_STYLE_ASSIGNMENT((#1920)); +#1920 = SURFACE_STYLE_USAGE(.BOTH.,#1921); +#1921 = SURFACE_SIDE_STYLE('',(#1922)); +#1922 = SURFACE_STYLE_FILL_AREA(#1923); +#1923 = FILL_AREA_STYLE('',(#1924)); +#1924 = FILL_AREA_STYLE_COLOUR('',#1925); +#1925 = COLOUR_RGB('',0.690999984741,0.663999974728,0.597999989986); +#1926 = STYLED_ITEM('color',(#1927),#1564); +#1927 = PRESENTATION_STYLE_ASSIGNMENT((#1928)); +#1928 = SURFACE_STYLE_USAGE(.BOTH.,#1929); +#1929 = SURFACE_SIDE_STYLE('',(#1930)); +#1930 = SURFACE_STYLE_FILL_AREA(#1931); +#1931 = FILL_AREA_STYLE('',(#1932)); +#1932 = FILL_AREA_STYLE_COLOUR('',#1925); +ENDSEC; +END-ISO-10303-21;
package.jsonadded+190@@ -0,0 +1,190 @@+{+ "slug": "mic5528-3-3ymt-tr",+ "version": "0.1.0",+ "type": "component",+ "description": "Microchip Tech Voltage Regulators - Linear, Low Drop Out (LDO) Regulators, TDFN-6-EP(1.2x1.2). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",+ "tags": [+ "component",+ "power management (pmic)",+ "mic5528-3.3ymt-tr",+ "factory-2.0.0",+ "extractor-text"+ ],+ "dependencies": {},+ "hero": {+ "type": "image",+ "path": "docs/hero.png"+ },+ "files": [+ "page.json",+ "README.md",+ "mic5528-3-3ymt-tr.kicad_sym",+ "mic5528-3-3ymt-tr.kicad_mod",+ "mic5528-3-3ymt-tr.glb",+ "mic5528-3-3ymt-tr.step",+ "mic5528-3-3ymt-tr.lbr",+ "docs/hero.png",+ "docs/mic5528-3-3ymt-tr-datasheet.pdf",+ "viewers/symbol.html",+ "viewers/footprint.html",+ "mic5528-3-3ymt-tr-hero.glb",+ "mic5528-3-3ymt-tr-hero.overlay.json",+ "mic5528-3-3ymt-tr-etched.glb"+ ],+ "component": {+ "mpn": "MIC5528-3.3YMT-TR",+ "manufacturer": "Microchip Tech",+ "package": "TDFN-6-EP(1.2x1.2)",+ "pin_count": 7,+ "category": "Power Management (PMIC)",+ "subcategory": "Voltage Regulators - Linear, Low Drop Out (LDO) Regulators",+ "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588940941323882496",+ "parts": {+ "symbol": "mic5528-3-3ymt-tr.kicad_sym",+ "footprint": "mic5528-3-3ymt-tr.kicad_mod",+ "model_3d": "mic5528-3-3ymt-tr-hero.glb",+ "model_3d_plain": "mic5528-3-3ymt-tr-etched.glb",+ "model_3d_step": "mic5528-3-3ymt-tr-etched.step",+ "model_3d_step_plain": "mic5528-3-3ymt-tr.step",+ "lbr": "mic5528-3-3ymt-tr.lbr"+ },+ "distributor_links": {+ "lcsc": "C622490",+ "digikey": "576-4766-2-ND",+ "mouser": "998-MIC5528-3.3YMTTR"+ },+ "distributor_check": {+ "checked_at": "2026-10-19T06:15:58Z",+ "source": "Component Ocean /api/assign-pns",+ "digikey": {+ "pn": "576-4766-2-ND",+ "status": "found"+ },+ "mouser": {+ "pn": "998-MIC5528-3.3YMTTR",+ "status": "found"+ }+ },+ "pins": [+ {+ "number": "1",+ "name": "VOUT",+ "type": "power_out",+ "description": "Regulated output voltage; when the regulator is disabled, an internal 25 Ω load is switched in to discharge the external capacitors."+ },+ {+ "number": "2",+ "name": "VOUT",+ "type": "power_out",+ "description": "Regulated output voltage (second output pin, internally tied to pin 1); when the regulator is disabled, an internal 25 Ω load is switched in to discharge the external capacitors."+ },+ {+ "number": "3",+ "name": "GND",+ "type": "power_in",+ "description": "Ground reference for the regulator."+ },+ {+ "number": "4",+ "name": "EN",+ "type": "input",+ "description": "Active-high enable: high turns the output on and low turns it off; the internal pull-down means the pin can be left floating, and the enable voltage operating range is 0 V to VIN."+ },+ {+ "number": "5",+ "name": "NC",+ "type": "unconnected",+ "description": "No connection."+ },+ {+ "number": "6",+ "name": "VIN",+ "type": "power_in",+ "description": "Supply input; operating range is +2.5 V to +5.5 V, with an absolute maximum of -0.3 V to +6 V."+ },+ {+ "number": "7",+ "name": "EP",+ "type": "passive",+ "description": "Exposed pad (from the footprint; not named in the datasheet pin table)."+ }+ ],+ "provenance": {+ "extractor": "extract_pins 0.3",+ "factory_chain": {+ "factory": "2.0.0",+ "extractor": "extract_pins 0.3",+ "primary_model": "claude-haiku-5-5",+ "primary_mode": "text",+ "consensus_model": "claude-sonnet-5-5",+ "consensus": "agreed",+ "guards": "pin_guards 0.1: passed",+ "guard_notes": [+ "extractor flagged: The MPN suffix -YMT (3.3V, 6-Lead TDFN, MT package) matches the requested TDFN-6-EP 1.2x1.2 package ; The datasheet calls EP an exposed heatsink pad to be connected to GND but does not give an electrica; The datasheet lists pins 1 and 2 together as VOUT in one table row. Both are listed separately here ",+ "exposed pad 7 added from the footprint",+ "dropped thermal pad ['EP'] absent from footprint"+ ],+ "pages_sent": 24,+ "cost_usd": 0.0834,+ "at": "2026-10-19T06:15:42"+ },+ "datasheet": {+ "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588940941323882496",+ "pages": 24,+ "sha256": "4f56b145d23b9985",+ "source_tier": "lcsc"+ },+ "cad": "KiCad official (CC-BY-SA 4.0)",+ "pins": {+ "total": 7,+ "described": 7,+ "cites_pages": true,+ "refuses_to_fabricate": true+ }+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ },+ "models_3d": [+ {+ "file": "mic5528-3-3ymt-tr.step",+ "role": "plain",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 1.2,+ 1.1,+ 0.4+ ],+ "zmin_mm": 0.0,+ "centre_offset_mm": 0.0,+ "footprint_binding": "identity",+ "sha256": "8d1d7d43d3ba630fb5505487dbfe131fa66634f20e2cc4b4f02c5045f0f0e396",+ "checked": "2026-10-19",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ },+ {+ "file": "mic5528-3-3ymt-tr-etched.step",+ "role": "eda",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 1.2,+ 1.1,+ 0.4+ ],+ "zmin_mm": 0.0,+ "centre_offset_mm": 0.0,+ "footprint_binding": "identity",+ "sha256": "3015eff4af33b89602b317c1ba9f663b8b3c1b4a328c4fcdaa15483bf1ea39e8",+ "checked": "2026-10-19",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ }+ ]+ }+}
page.jsonadded+196@@ -0,0 +1,196 @@+{+ "slug": "mic5528-3-3ymt-tr",+ "version": "0.1.0",+ "type": "component",+ "description": "Microchip Tech Voltage Regulators - Linear, Low Drop Out (LDO) Regulators, TDFN-6-EP(1.2x1.2). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",+ "tags": [+ "component",+ "power management (pmic)",+ "mic5528-3.3ymt-tr",+ "factory-2.0.0",+ "extractor-text"+ ],+ "dependencies": {},+ "hero": {+ "type": "image",+ "path": "docs/hero.png"+ },+ "files": [+ "page.json",+ "README.md",+ "mic5528-3-3ymt-tr.kicad_sym",+ "mic5528-3-3ymt-tr.kicad_mod",+ "mic5528-3-3ymt-tr.glb",+ "mic5528-3-3ymt-tr.step",+ "mic5528-3-3ymt-tr.lbr",+ "docs/hero.png",+ "docs/mic5528-3-3ymt-tr-datasheet.pdf",+ "viewers/symbol.html",+ "viewers/footprint.html",+ "mic5528-3-3ymt-tr-hero.glb",+ "mic5528-3-3ymt-tr-hero.overlay.json",+ "mic5528-3-3ymt-tr-etched.glb"+ ],+ "component": {+ "mpn": "MIC5528-3.3YMT-TR",+ "manufacturer": "Microchip Tech",+ "package": "TDFN-6-EP(1.2x1.2)",+ "pin_count": 7,+ "category": "Power Management (PMIC)",+ "subcategory": "Voltage Regulators - Linear, Low Drop Out (LDO) Regulators",+ "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588940941323882496",+ "parts": {+ "symbol": "mic5528-3-3ymt-tr.kicad_sym",+ "footprint": "mic5528-3-3ymt-tr.kicad_mod",+ "model_3d": "mic5528-3-3ymt-tr-hero.glb",+ "model_3d_plain": "mic5528-3-3ymt-tr-etched.glb",+ "model_3d_step": "mic5528-3-3ymt-tr-etched.step",+ "model_3d_step_plain": "mic5528-3-3ymt-tr.step",+ "lbr": "mic5528-3-3ymt-tr.lbr"+ },+ "distributor_links": {+ "lcsc": "C622490",+ "digikey": "576-4766-2-ND",+ "mouser": "998-MIC5528-3.3YMTTR"+ },+ "distributor_check": {+ "checked_at": "2026-10-19T06:15:58Z",+ "source": "Component Ocean /api/assign-pns",+ "digikey": {+ "pn": "576-4766-2-ND",+ "status": "found"+ },+ "mouser": {+ "pn": "998-MIC5528-3.3YMTTR",+ "status": "found"+ }+ },+ "pins": [+ {+ "number": "1",+ "name": "VOUT",+ "type": "power_out",+ "description": "Regulated output voltage; when the regulator is disabled, an internal 25 Ω load is switched in to discharge the external capacitors."+ },+ {+ "number": "2",+ "name": "VOUT",+ "type": "power_out",+ "description": "Regulated output voltage (second output pin, internally tied to pin 1); when the regulator is disabled, an internal 25 Ω load is switched in to discharge the external capacitors."+ },+ {+ "number": "3",+ "name": "GND",+ "type": "power_in",+ "description": "Ground reference for the regulator."+ },+ {+ "number": "4",+ "name": "EN",+ "type": "input",+ "description": "Active-high enable: high turns the output on and low turns it off; the internal pull-down means the pin can be left floating, and the enable voltage operating range is 0 V to VIN."+ },+ {+ "number": "5",+ "name": "NC",+ "type": "unconnected",+ "description": "No connection."+ },+ {+ "number": "6",+ "name": "VIN",+ "type": "power_in",+ "description": "Supply input; operating range is +2.5 V to +5.5 V, with an absolute maximum of -0.3 V to +6 V."+ },+ {+ "number": "7",+ "name": "EP",+ "type": "passive",+ "description": "Exposed pad (from the footprint; not named in the datasheet pin table)."+ }+ ],+ "provenance": {+ "extractor": "extract_pins 0.3",+ "factory_chain": {+ "factory": "2.0.0",+ "extractor": "extract_pins 0.3",+ "primary_model": "claude-haiku-5-5",+ "primary_mode": "text",+ "consensus_model": "claude-sonnet-5-5",+ "consensus": "agreed",+ "guards": "pin_guards 0.1: passed",+ "guard_notes": [+ "extractor flagged: The MPN suffix -YMT (3.3V, 6-Lead TDFN, MT package) matches the requested TDFN-6-EP 1.2x1.2 package ; The datasheet calls EP an exposed heatsink pad to be connected to GND but does not give an electrica; The datasheet lists pins 1 and 2 together as VOUT in one table row. Both are listed separately here ",+ "exposed pad 7 added from the footprint",+ "dropped thermal pad ['EP'] absent from footprint"+ ],+ "pages_sent": 24,+ "cost_usd": 0.0834,+ "at": "2026-10-19T06:15:42"+ },+ "datasheet": {+ "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588940941323882496",+ "pages": 24,+ "sha256": "4f56b145d23b9985",+ "source_tier": "lcsc"+ },+ "cad": "KiCad official (CC-BY-SA 4.0)",+ "pins": {+ "total": 7,+ "described": 7,+ "cites_pages": true,+ "refuses_to_fabricate": true+ }+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ },+ "models_3d": [+ {+ "file": "mic5528-3-3ymt-tr.step",+ "role": "plain",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 1.2,+ 1.1,+ 0.4+ ],+ "zmin_mm": 0,+ "centre_offset_mm": 0,+ "footprint_binding": "identity",+ "sha256": "8d1d7d43d3ba630fb5505487dbfe131fa66634f20e2cc4b4f02c5045f0f0e396",+ "checked": "2026-10-19",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ },+ {+ "file": "mic5528-3-3ymt-tr-etched.step",+ "role": "eda",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 1.2,+ 1.1,+ 0.4+ ],+ "zmin_mm": 0,+ "centre_offset_mm": 0,+ "footprint_binding": "identity",+ "sha256": "3015eff4af33b89602b317c1ba9f663b8b3c1b4a328c4fcdaa15483bf1ea39e8",+ "checked": "2026-10-19",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ }+ ]+ },+ "visibility": "public",+ "org": "adom",+ "author": {+ "name": "Ray",+ "email": "[email protected]"+ }+}
viewers/footprint.htmladded+1@@ -0,0 +1 @@+<!doctype html><title>mic5528-3-3ymt-tr</title>
viewers/symbol.htmladded+1@@ -0,0 +1 @@+<!doctype html><title>mic5528-3-3ymt-tr</title>