← Commit history
page.json+8−5@@ -32,19 +32,19 @@ "number": "1", "name": "VIN", "type": "power_in",- "description": "Main input supply pin, 3.0 V to 5.5 V operating range (absolute max +6 V). Connect at least a 2.2 \u00b5F (min 1 \u00b5F) ceramic bypass capacitor between VIN and GND, placed close to the pin."+ "description": "Main input supply pin, 3.0 V to 5.5 V operating range (absolute max +6 V). Connect at least a 2.2 µF (min 1 µF) ceramic bypass capacitor between VIN and GND, placed close to the pin." }, { "number": "2", "name": "EN", "type": "input",- "description": "Enable input for the linear LED driver; also serves as the Ultra Fast PWM dimming input (200 Hz-500 kHz, duty cycle down to ~1%). Logic low \u2264 0.2 V, logic high \u2265 1.2 V. Pulling EN low for >40 ms enters low-IQ sleep mode. Do not leave floating."+ "description": "Enable input for the linear LED driver; also serves as the Ultra Fast PWM dimming input (200 Hz-500 kHz, duty cycle down to ~1%). Logic low ≤ 0.2 V, logic high ≥ 1.2 V. Pulling EN low for >40 ms enters low-IQ sleep mode. Do not leave floating." }, { "number": "3", "name": "RSET", "type": "passive",- "description": "Peak-current programming pin. An internal 1.27 V reference across an external resistor from RSET to GND sets the nominal maximum WLED current: ILED (mA) \u2248 4920\u00b7D / (RSET(k\u03a9) \u2212 0.280). Example: 6.19 k\u03a9 sets ~830 mA at 100% duty cycle."+ "description": "Peak-current programming pin. An internal 1.27 V reference across an external resistor from RSET to GND sets the nominal maximum WLED current: ILED (mA) ≈ 4920·D / (RSET(kΩ) − 0.280). Example: 6.19 kΩ sets ~830 mA at 100% duty cycle." }, { "number": "4",@@ -80,7 +80,7 @@ "number": "EP", "name": "EPAD", "type": "passive",- "description": "Exposed heat-sink pad on the underside of the SOIC-8-EP package. Not internally connected to the die, but must be soldered to the PCB ground plane for thermal dissipation (\u03b8JA = 41 \u00b0C/W)."+ "description": "Exposed heat-sink pad on the underside of the SOIC-8-EP package. Not internally connected to the die, but must be soldered to the PCB ground plane for thermal dissipation (θJA = 41 °C/W)." } ], "provenance": {@@ -150,5 +150,8 @@ "docs/mic4802yme-datasheet.pdf", "viewers/symbol.html", "viewers/footprint.html"- ]+ ],+ "visibility": {+ "public": true+ } }