← Commit history
page.json+9−6@@ -32,7 +32,7 @@ "number": "1", "name": "SW", "type": "output",- "description": "Power switch output. Drain of the internal N-channel MOSFET (80 m\u03a9 RDS(on), 2.5 A typical current limit). Connect the boost inductor and the anode of the output rectifier here. The SW node swings between GND and up to 22 V."+ "description": "Power switch output. Drain of the internal N-channel MOSFET (80 mΩ RDS(on), 2.5 A typical current limit). Connect the boost inductor and the anode of the output rectifier here. The SW node swings between GND and up to 22 V." }, { "number": "2",@@ -44,25 +44,25 @@ "number": "3", "name": "FB", "type": "input",- "description": "Feedback input to the internal error amplifier. Regulates to VFB = 0.6 V (0.588 V min / 0.612 V max). Connect an R1/R2 resistor divider from VOUT to FB to GND to set the output voltage: VOUT = 0.6 V \u00d7 (1 + R1/R2)."+ "description": "Feedback input to the internal error amplifier. Regulates to VFB = 0.6 V (0.588 V min / 0.612 V max). Connect an R1/R2 resistor divider from VOUT to FB to GND to set the output voltage: VOUT = 0.6 V × (1 + R1/R2)." }, { "number": "4", "name": "EN", "type": "input",- "description": "Regulator enable / on-off control. VIH \u2265 1.5 V turns the converter on; VIL \u2264 0.6 V shuts it down (IQ \u2248 0.1 \u00b5A). Tie to VIN for automatic startup; do not leave floating."+ "description": "Regulator enable / on-off control. VIH ≥ 1.5 V turns the converter on; VIL ≤ 0.6 V shuts it down (IQ ≈ 0.1 µA). Tie to VIN for automatic startup; do not leave floating." }, { "number": "5", "name": "VIN", "type": "power_in",- "description": "Input supply pin, 2.2 V to 16 V operating range (18 V absolute max). UVLO releases at ~2.2 V with 100 mV hysteresis. Bypass locally with a 22 \u00b5F X5R/X7R ceramic capacitor placed close to the pin."+ "description": "Input supply pin, 2.2 V to 16 V operating range (18 V absolute max). UVLO releases at ~2.2 V with 100 mV hysteresis. Bypass locally with a 22 µF X5R/X7R ceramic capacitor placed close to the pin." }, { "number": "6", "name": "OC", "type": "input",- "description": "Adjustable peak-switch current-limit programming pin. Connect a resistor (R3) from OC to GND, 19 k\u03a9 to 96 k\u03a9, to set IOCP = 48000 / R3 (0.5 A to 2.5 A). If left floating, the internal 2.5 A current limit is used."+ "description": "Adjustable peak-switch current-limit programming pin. Connect a resistor (R3) from OC to GND, 19 kΩ to 96 kΩ, to set IOCP = 48000 / R3 (0.5 A to 2.5 A). If left floating, the internal 2.5 A current limit is used." } ], "provenance": {@@ -126,5 +126,8 @@ "docs/mfp6291lr-g1-datasheet.pdf", "viewers/symbol.html", "viewers/footprint.html"- ]+ ],+ "visibility": {+ "public": true+ } }