← Commit history
me8311as7g: restore the component block (pinout + model declarations) from this page's own README and symbol
1 file changed
+68−1
page.json+68−1@@ -33,5 +33,72 @@ "author": { "name": "Ray", "email": "[email protected]"+ },+ "component": {+ "mpn": "ME8311AS7G",+ "manufacturer": "MICRONE",+ "package": "SOP-7",+ "pin_count": 7,+ "category": "AC-DC Controllers and Regulators",+ "parts": {+ "symbol": "me8311as7g.kicad_sym",+ "footprint": "me8311as7g.kicad_mod",+ "model_3d": "me8311as7g-etched.glb",+ "model_3d_plain": "me8311as7g.glb",+ "model_3d_step": "me8311as7g-etched.step",+ "model_3d_step_plain": "me8311as7g.step",+ "lbr": "me8311as7g.lbr"+ },+ "pins": [+ {+ "number": "1",+ "name": "VDD",+ "type": "power_in",+ "description": "Chip power supply, typically fed from the transformer auxiliary winding via a rectifier. UVLO(off)=13.5V typ (start-up), UVLO(on)=8.0V typ, VDD_OVP=31V typ, max operating voltage 30V, absolute max 30V. Static current ~420µA at 15V; start-up current ~1µA at 11V."+ },+ {+ "number": "2",+ "name": "COMP",+ "type": "passive",+ "description": "Loop compensation node for the CV control loop. An external compensation capacitor (Cc) is connected from this pin to GND to set the CV loop stability."+ },+ {+ "number": "3",+ "name": "INV",+ "type": "input",+ "description": "Voltage feedback input from the auxiliary winding via an external resistor divider (R1/R2). The auxiliary voltage is sampled mid-demagnetization and compared to VREF_INV = 2.00V typ (1.94-2.10V). Used to reflect the output voltage; PWM duty cycle is derived from the EA output and the CS current-sense signal. Absolute max -0.3 to +7V."+ },+ {+ "number": "4",+ "name": "CS",+ "type": "input",+ "description": "Current-sense input. Connected to the source-side sense resistor (Rs) of the internal power MOSFET; sets the OCP / CC point. Over-current threshold Vth_ocp = 500mV typ (485-515mV), LEB time ~0.5µs, OCP propagation delay ~100ns. Absolute max -0.3 to +7V."+ },+ {+ "number": "5",+ "name": "DRAIN",+ "type": "power_out",+ "description": "Drain of the integrated 600V high-voltage power MOSFET. Connects to the primary winding of the flyback transformer. Pins 5 and 6 are internally tied together for improved current handling and thermal dissipation. Static Rds(on) ~10Ω typ (15Ω max) at Vgs=10V, Id=1A; BVdss ≥ 600V."+ },+ {+ "number": "6",+ "name": "DRAIN",+ "type": "power_out",+ "description": "Drain of the integrated 600V high-voltage power MOSFET (second bond of the same internal net). Connects to the primary winding of the flyback transformer along with pin 5."+ },+ {+ "number": "7",+ "name": "GND",+ "type": "power_in",+ "description": "Device ground / source return for the integrated power MOSFET and reference for all analog signals. On the SOP-7 variant, GND appears on pin 7 only (the SOP-8 splits GND across pins 7 and 8)."+ }+ ],+ "provenance": {+ "rebuilt": "component block rebuilt 2026-10-05 from this page's own README pinout table and .kicad_sym (pins cross-checked), no re-extraction"+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ } }-}+}