← Commit history

me8202sg: restore the component block (pinout + model declarations) from this page's own README and symbol

Ray ·30125e3ce2 · ·parent f306a19
1 file changed +74−1
page.json+74−1
@@ -33,5 +33,78 @@   "author": {     "name": "Ray",     "email": "[email protected]"+  },+  "component": {+    "mpn": "ME8202SG",+    "manufacturer": "MICRONE",+    "package": "SOP-8",+    "pin_count": 8,+    "category": "AC-DC Controllers and Regulators",+    "parts": {+      "symbol": "me8202sg.kicad_sym",+      "footprint": "me8202sg.kicad_mod",+      "model_3d": "me8202sg-etched.glb",+      "model_3d_plain": "me8202sg.glb",+      "model_3d_step": "me8202sg-etched.step",+      "model_3d_step_plain": "me8202sg.step",+      "lbr": "me8202sg.lbr"+    },+    "pins": [+      {+        "number": "1",+        "name": "GND",+        "type": "power_in",+        "description": "Device ground reference. All internal voltages and the current-sense return are referenced to this pin."+      },+      {+        "number": "2",+        "name": "FB",+        "type": "input",+        "description": "Feedback input pin. PWM duty cycle is determined by the voltage at this pin combined with the current-sense signal at pin 6 (SENSE). Open-loop voltage ≈5.8V, burst-mode threshold ≈1.7V, power-limit threshold ≈4.4V, input impedance ≈7.2kΩ."+      },+      {+        "number": "3",+        "name": "VIN",+        "type": "input",+        "description": "High-voltage startup and line-voltage-sense input. Connected through a large-value startup resistor (typ. 2MΩ) to the rectified AC line for IC startup supply and for OCP line-voltage compensation. Absolute max 30V DC."+      },+      {+        "number": "4",+        "name": "RI",+        "type": "passive",+        "description": "Internal oscillator frequency setting pin. A resistor from RI to GND programs the PWM switching frequency per Fosc = 1560 / RI(kΩ) [KHz]. Recommended RI range 24-31kΩ (operating range 12-60kΩ). Open-load voltage ≈2V."+      },+      {+        "number": "5",+        "name": "RT",+        "type": "input",+        "description": "Over-temperature protection sensing input. An NTC resistor (in series with a regular resistor) is connected from RT to GND; the pin sources ≈70µA and OTP trips when V(RT) falls below VTH_OTP ≈1.065V. Open voltage ≈3.5V."+      },+      {+        "number": "6",+        "name": "SENSE",+        "type": "input",+        "description": "Current-sense input. Connected to the top of the MOSFET source current-sense resistor for cycle-by-cycle OCP. Has 250ns leading-edge blanking and ~30kΩ input impedance; OCP threshold ≈0.9V at IVIN=0 (line-compensated down to ~0.81V at IVIN=150µA)."+      },+      {+        "number": "7",+        "name": "VDD",+        "type": "power_in",+        "description": "Chip DC supply pin, typically fed from an auxiliary transformer winding. Recommended operating range 12-23V; UVLO enter ≈10.5V, UVLO exit (start) ≈16.5V, internal Zener clamp ≈35V, OVP shutdown ≈25V."+      },+      {+        "number": "8",+        "name": "GATE",+        "type": "output",+        "description": "Totem-pole gate-drive output for the external power MOSFET. Internally clamped to ≈16V for MOSFET gate protection. VOH ≥11V at IO=20mA, VOL ≤0.3V at IO=-20mA, tr ≈120ns / tf ≈50ns into 1nF."+      }+    ],+    "provenance": {+      "rebuilt": "component block rebuilt 2026-10-05 from this page's own README pinout table and .kicad_sym (pins cross-checked), no re-extraction"+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    }   }-}\ No newline at end of file+}