← Commit history
me4074bm5g: restore the component block (pinout + model declarations) from this page's own README and symbol
1 file changed
+56−1
page.json+56−1@@ -33,5 +33,60 @@ "author": { "name": "Ray", "email": "[email protected]"+ },+ "component": {+ "mpn": "ME4074BM5G",+ "manufacturer": "MICRONE",+ "package": "SOT-23-5",+ "pin_count": 5,+ "category": "Battery Management",+ "parts": {+ "symbol": "me4074bm5g.kicad_sym",+ "footprint": "me4074bm5g.kicad_mod",+ "model_3d": "me4074bm5g-etched.glb",+ "model_3d_plain": "me4074bm5g.glb",+ "model_3d_step": "me4074bm5g-etched.step",+ "model_3d_step_plain": "me4074bm5g.step",+ "lbr": "me4074bm5g.lbr"+ },+ "pins": [+ {+ "number": "1",+ "name": "CHRG",+ "type": "output",+ "description": "Open-drain charge status output. Strong pull-down while charging, high-impedance when charge terminates or the part is shut down. Drive an LED to VCC through a 1 k-10 kΩ series resistor; tie to GND if the indicator is not needed. Absolute max −0.3 V to 6.5 V; VOL ≈ 0.3 V at 5 mA sink."+ },+ {+ "number": "2",+ "name": "GND",+ "type": "power_in",+ "description": "Device ground return. Should tie to a wide PCB copper pour to act as the primary thermal path from the SOT-23-5 lead frame."+ },+ {+ "number": "3",+ "name": "BAT",+ "type": "power_out",+ "description": "Charge current output to the Li-Ion cell. In CC mode IBAT = 1000 V / RPROG (up to 800 mA). Also senses the battery voltage for the 4.2 V float regulation, 2.9 V trickle threshold and 4.05 V auto-recharge threshold. Absolute max −0.3 V to 6.5 V, 800 mA continuous."+ },+ {+ "number": "4",+ "name": "VCC",+ "type": "power_in",+ "description": "Positive supply input from USB or AC adapter. Operating range 4.0 V - 6.5 V (5.0 V typ.); UVLO ≈ 3.7 V. Bypass with ≥1 µF; add ~1.5 Ω series with X5R ceramics to damp start-up transients. Absolute max −0.3 V to 6.5 V."+ },+ {+ "number": "5",+ "name": "PROG",+ "type": "bidirectional",+ "description": "Charge-current program pin. Connect RPROG from PROG to GND: ICHG = 1000 V / RPROG (e.g. 2 kΩ → 500 mA, 1.25 kΩ → 800 mA). Servos to VPROG = 1.0 V in CC mode; monitor VPROG to read back IBAT = 1000·VPROG/RPROG. Floating PROG puts the device into shutdown (IBAT ≤ 2 µA, ICC ≈ 55 µA). Absolute max −0.3 V to VCC+0.3 V."+ }+ ],+ "provenance": {+ "rebuilt": "component block rebuilt 2026-10-05 from this page's own README pinout table and .kicad_sym (pins cross-checked), no re-extraction"+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ } }-}+}