← Commit history
README.mdadded+49@@ -0,0 +1,49 @@+# ME4056ASPG-N++**MICRONE** · Battery Management · ESOP-8++ME4056ASPG-N from MICRONE, in a ESOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | TEMP | input | Battery temperature sense input. Connect to the wiper of an NTC divider referenced to VCC; charging stops if V(TEMP) drops below ~45% VCC or rises above ~80% VCC (over/under-temperature). Tie directly to GND to disable temperature monitoring. |+| 2 | PROG | passive | Charge-current program pin. A resistor R_PROG from this pin to GND sets the constant-current level per I_BAT = 1300 * V_PROG / R_PROG (V_PROG ≈ 1.0 V). Also used internally for charge-current monitoring and C/10 termination detection. |+| 3 | GND | power_in | Device ground / power return. The ESOP-8 exposed thermal pad should also connect to this net for heat dissipation. |+| 4 | VCC | power_in | Charger supply input (4.0-7.0 V, 5 V typical; keep ≤ 5.5 V for full 0.9 A charging). When VCC falls to within ~80 mV of BAT the internal pass FET shuts off and the device enters sleep mode with < 2 µA battery leakage. |+| 5 | BAT | power_out | Battery connection. Sources the charging current and regulates to V_FLOAT = 4.2 V (A suffix) or 4.34 V (D suffix) during constant-voltage phase. Bypass with a low-ESR capacitor to GND. |+| 6 | /STDBY | output | Charge-complete status indicator, open-drain, active-low. Internal N-MOS pulls low when charge termination is detected; high-impedance in all other states. Typically pulled up through an LED to VCC. |+| 7 | /CHRG | output | Charging status indicator, open-drain, active-low. Internal N-MOS pulls low while the battery is being charged; high-impedance otherwise. Typically pulled up through an LED to VCC. |+| 8 | CE | input | Chip-enable input, active-high, Schmitt-trigger. Drive high to enable normal charging; drive low to disable and place the device in low-current standby. Compatible with TTL/CMOS logic levels. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | MICRONE |+| Package | ESOP-8 |+| Category | PMIC |+| Pins | 8 |++## Ordering variants++- `ME4056ASPG-N`+- `ME4056ASPG-NDSPG-N`++## CAD (KiCad official)++- Symbol: `ME4056ASPG-N`+- Footprint: `Package_SO:SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.29x3mm`+- 3D model: ESOP-8 (KiCad packages3D, STEP)++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [MICRONE datasheet](docs/me4056aspg-n-datasheet.pdf) (17 pp, sha256 `7fdf54d13dc3989b`, retrieved 2026-08-17, tier: lcsc)+- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.+- **Extractor:** `ds2sf` (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/me4056aspg-n-datasheet.pdf)
page.jsonadded+34@@ -0,0 +1,34 @@+{+ "slug": "me4056aspg-n",+ "version": "0.1.0",+ "type": "component",+ "description": "MICRONE Battery Management, ESOP-8. Datasheet-verified pinout, KiCad symbol/footprint/3D.",+ "tags": [+ "component",+ "pmic",+ "me4056aspg-n"+ ],+ "dependencies": {},+ "hero": {+ "type": "image",+ "path": "docs/hero.png"+ },+ "files": [+ "page.json",+ "README.md",+ "me4056aspg-n.kicad_sym",+ "me4056aspg-n.kicad_mod",+ "me4056aspg-n.glb",+ "me4056aspg-n.step",+ "me4056aspg-n.lbr",+ "docs/hero.png",+ "docs/me4056aspg-n-datasheet.pdf",+ "viewers/symbol.html",+ "viewers/footprint.html"+ ],+ "visibility": "public",+ "author": {+ "name": "Ray",+ "email": "[email protected]"+ }+}