← Commit history

me4056aspg-n: factory component page (tier=lcsc)

Ray ·01f73286cf · ·parent 1a3051f
1 file changed +116−8
page.json+116−8
@@ -1,13 +1,126 @@ {+  "schema_version": 1,+  "type": "component",   "slug": "me4056aspg-n",+  "title": "ME4056ASPG-N",+  "brief": "MICRONE Battery Management, ESOP-8. Datasheet-verified pinout, KiCad symbol/footprint/3D.",   "version": "0.1.0",-  "type": "component",-  "description": "MICRONE Battery Management, ESOP-8. Datasheet-verified pinout, KiCad symbol/footprint/3D.",+  "license": "CC-BY-SA-4.0",   "tags": [     "component",     "pmic",     "me4056aspg-n"   ],+  "component": {+    "mpn": "ME4056ASPG-N",+    "manufacturer": "MICRONE",+    "package": "ESOP-8",+    "pin_count": 8,+    "category": "PMIC",+    "subcategory": "Battery Management",+    "datasheet": "https://wmsc.lcsc.com/wmsc/upload/file/pdf/v2/lcsc/2201121330_MICRONE-Nanjing-Micro-One-Elec-ME4056ASPG-N_C2925765.pdf",+    "parts": {+      "symbol": "me4056aspg-n.kicad_sym",+      "footprint": "me4056aspg-n.kicad_mod",+      "model_3d": "me4056aspg-n.glb",+      "model_3d_step": "me4056aspg-n.step",+      "lbr": "me4056aspg-n.lbr"+    },+    "distributor_links": {},+    "pins": [+      {+        "number": "1",+        "name": "TEMP",+        "type": "input",+        "description": "Battery temperature sense input. Connect to the wiper of an NTC divider referenced to VCC; charging stops if V(TEMP) drops below ~45% VCC or rises above ~80% VCC (over/under-temperature). Tie directly to GND to disable temperature monitoring."+      },+      {+        "number": "2",+        "name": "PROG",+        "type": "passive",+        "description": "Charge-current program pin. A resistor R_PROG from this pin to GND sets the constant-current level per I_BAT = 1300 * V_PROG / R_PROG (V_PROG \u2248 1.0 V). Also used internally for charge-current monitoring and C/10 termination detection."+      },+      {+        "number": "3",+        "name": "GND",+        "type": "power_in",+        "description": "Device ground / power return. The ESOP-8 exposed thermal pad should also connect to this net for heat dissipation."+      },+      {+        "number": "4",+        "name": "VCC",+        "type": "power_in",+        "description": "Charger supply input (4.0-7.0 V, 5 V typical; keep \u2264 5.5 V for full 0.9 A charging). When VCC falls to within ~80 mV of BAT the internal pass FET shuts off and the device enters sleep mode with < 2 \u00b5A battery leakage."+      },+      {+        "number": "5",+        "name": "BAT",+        "type": "power_out",+        "description": "Battery connection. Sources the charging current and regulates to V_FLOAT = 4.2 V (A suffix) or 4.34 V (D suffix) during constant-voltage phase. Bypass with a low-ESR capacitor to GND."+      },+      {+        "number": "6",+        "name": "/STDBY",+        "type": "output",+        "description": "Charge-complete status indicator, open-drain, active-low. Internal N-MOS pulls low when charge termination is detected; high-impedance in all other states. Typically pulled up through an LED to VCC."+      },+      {+        "number": "7",+        "name": "/CHRG",+        "type": "output",+        "description": "Charging status indicator, open-drain, active-low. Internal N-MOS pulls low while the battery is being charged; high-impedance otherwise. Typically pulled up through an LED to VCC."+      },+      {+        "number": "8",+        "name": "CE",+        "type": "input",+        "description": "Chip-enable input, active-high, Schmitt-trigger. Drive high to enable normal charging; drive low to disable and place the device in low-current standby. Compatible with TTL/CMOS logic levels."+      }+    ],+    "provenance": {+      "extractor": "ds2sf",+      "datasheet": {+        "url": "https://wmsc.lcsc.com/wmsc/upload/file/pdf/v2/lcsc/2201121330_MICRONE-Nanjing-Micro-One-Elec-ME4056ASPG-N_C2925765.pdf",+        "pages": 17,+        "sha256": "7fdf54d13dc3989b",+        "source_tier": "lcsc"+      },+      "cad": "KiCad official (CC-BY-SA 4.0)",+      "pins": {+        "total": 8,+        "described": 8,+        "cites_pages": true,+        "refuses_to_fabricate": true+      }+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    }+  },+  "metadata": {+    "specs": {+      "Manufacturer": "MICRONE",+      "Package": "ESOP-8",+      "Category": "PMIC",+      "Pins": "8"+    }+  },+  "sections": [+    "hero",+    "viewers",+    "readme",+    "breadcrumbs",+    "info"+  ],+  "discovery_triggers": [+    "me4056aspg-n"+  ],+  "discovery_pitch": "ME4056ASPG-N (MICRONE) component page with datasheet-verified CAD.",+  "author": {+    "name": "Ray",+    "email": "[email protected]"+  },   "dependencies": {},   "hero": {     "type": "image",@@ -25,10 +138,5 @@     "docs/me4056aspg-n-datasheet.pdf",     "viewers/symbol.html",     "viewers/footprint.html"-  ],-  "visibility": "public",-  "author": {-    "name": "Ray",-    "email": "[email protected]"-  }+  ] }\ No newline at end of file