← Commit history
page.json+7−4@@ -32,7 +32,7 @@ "number": "1", "name": "VOUT", "type": "power_out",- "description": "Switched power output pin, connects to USB VBUS. Sourced from VIN through the internal 70 m\u03a9 high-side MOSFET; current is limited by the RSET resistor (Ioc = 60k / Rset, typ. 2.0 A with Rset = 30 k\u03a9). Has an internal pull-down to accelerate discharge of the output capacitor when the switch is disabled."+ "description": "Switched power output pin, connects to USB VBUS. Sourced from VIN through the internal 70 mΩ high-side MOSFET; current is limited by the RSET resistor (Ioc = 60k / Rset, typ. 2.0 A with Rset = 30 kΩ). Has an internal pull-down to accelerate discharge of the output capacitor when the switch is disabled." }, { "number": "2",@@ -44,13 +44,13 @@ "number": "3", "name": "RSET", "type": "input",- "description": "Current-limit threshold setting pin. Connect an external resistor from RSET to GND to program the over-current limit per Ioc = 60k\u03a9 / Rset (e.g. 30 k\u03a9 \u2192 2.0 A typ., 22 k\u03a9 \u2192 ~2.7 A typ.). Place the resistor as close as possible to the pin to minimize parasitics."+ "description": "Current-limit threshold setting pin. Connect an external resistor from RSET to GND to program the over-current limit per Ioc = 60kΩ / Rset (e.g. 30 kΩ → 2.0 A typ., 22 kΩ → ~2.7 A typ.). Place the resistor as close as possible to the pin to minimize parasitics." }, { "number": "4", "name": "EN", "type": "input",- "description": "Chip enable input. On the ME1502CM5G variant this is ACTIVE-LOW (VIL \u2264 0.4 V enables the switch, VIH \u2265 1.6 V disables it). Drives the internal power MOSFET on/off together with the UVLO comparator."+ "description": "Chip enable input. On the ME1502CM5G variant this is ACTIVE-LOW (VIL ≤ 0.4 V enables the switch, VIH ≥ 1.6 V disables it). Drives the internal power MOSFET on/off together with the UVLO comparator." }, { "number": "5",@@ -126,5 +126,8 @@ "docs/me1502cm5g-datasheet.pdf", "viewers/symbol.html", "viewers/footprint.html"- ]+ ],+ "visibility": {+ "public": true+ } }