← Commit history
page.json+7−4@@ -32,7 +32,7 @@ "number": "1", "name": "VOUT", "type": "power_out",- "description": "Switched power output; connects to the USB VBUS rail. Internally tied to VIN through the ~70m\u03a9 power MOSFET when the part is enabled. Place output capacitor (typ. 150uF plus 10uF) as close to this pin as possible."+ "description": "Switched power output; connects to the USB VBUS rail. Internally tied to VIN through the ~70mΩ power MOSFET when the part is enabled. Place output capacitor (typ. 150uF plus 10uF) as close to this pin as possible." }, { "number": "2",@@ -44,7 +44,7 @@ "number": "3", "name": "FLG", "type": "output",- "description": "Active-low, open-drain fault flag output. Pulled low during over-current or over-temperature events (after ~8ms deglitch). Output impedance ~60\u03a9 at ISINK=1mA; requires an external pull-up (typ. 100k\u03a9) to a logic supply."+ "description": "Active-low, open-drain fault flag output. Pulled low during over-current or over-temperature events (after ~8ms deglitch). Output impedance ~60Ω at ISINK=1mA; requires an external pull-up (typ. 100kΩ) to a logic supply." }, { "number": "4",@@ -56,7 +56,7 @@ "number": "5", "name": "VIN", "type": "power_in",- "description": "Power supply input, 2.7V to 5.5V (abs max 6V). Source for the internal ~70m\u03a9 high-side switch and all bias circuitry. UVLO rises at ~2.2V typ with ~0.2V hysteresis. Place 4.7uF input capacitor close to this pin."+ "description": "Power supply input, 2.7V to 5.5V (abs max 6V). Source for the internal ~70mΩ high-side switch and all bias circuitry. UVLO rises at ~2.2V typ with ~0.2V hysteresis. Place 4.7uF input capacitor close to this pin." } ], "provenance": {@@ -120,5 +120,8 @@ "docs/me1501cm5g-datasheet.pdf", "viewers/symbol.html", "viewers/footprint.html"- ]+ ],+ "visibility": {+ "public": true+ } }