← Commit history
page.json+6−3@@ -32,7 +32,7 @@ "number": "1", "name": "DS", "type": "input",- "description": "Delay-time select input. Tie low to select the internal ~200 ms release delay (Td1); tie high to bypass most of the counter chain for the short ~220 \u00b5s delay (Td2). Must be strapped to a fixed logic level (VSH \u2265 1.0 V or VSL \u2264 0.3 V at VDD=6.0 V); do not float."+ "description": "Delay-time select input. Tie low to select the internal ~200 ms release delay (Td1); tie high to bypass most of the counter chain for the short ~220 µs delay (Td2). Must be strapped to a fixed logic level (VSH ≥ 1.0 V or VSL ≤ 0.3 V at VDD=6.0 V); do not float." }, { "number": "2",@@ -50,7 +50,7 @@ "number": "4", "name": "VOUT", "type": "output",- "description": "Voltage detection output. Goes low when VDD falls below -VDET (2.7 V nominal) and returns high after the internal delay (Td1 \u2248 200 ms) once VDD rises above +VDET. NMOS variants are open-drain and require an external pull-up (max sink 50 mA, VOL specified at IOUT= 3 mA for VDD\u22652.4 V); CMOS variants are push-pull between VSS and VDD."+ "description": "Voltage detection output. Goes low when VDD falls below -VDET (2.7 V nominal) and returns high after the internal delay (Td1 ≈ 200 ms) once VDD rises above +VDET. NMOS variants are open-drain and require an external pull-up (max sink 50 mA, VOL specified at IOUT= 3 mA for VDD≥2.4 V); CMOS variants are push-pull between VSS and VDD." }, { "number": "5",@@ -120,5 +120,8 @@ "docs/md6127c27-datasheet.pdf", "viewers/symbol.html", "viewers/footprint.html"- ]+ ],+ "visibility": {+ "public": true+ } }