← Commit history
README.md+35−17
@@ -2,17 +2,15 @@  **Shanghai Mingda Microelectronics** · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · SOT-23-3L -MD5133 from Shanghai Mingda Microelectronics, in a SOT-23-3L. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.+MD5133 from Shanghai Mingda Microelectronics, in a SOT-23-3L. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.  ## Pinout  | Pin | Name | Type | Function | |---|---|---|---|-| 1 | VIN | power_in | Unregulated supply input. Operating range 1.4V to 7.0V; absolute max -0.3V to 8.0V. A ceramic input capacitor of >=1.0uF should be placed close to this pin. |-| 2 | GND | power_in | Device ground / return for VIN, VOUT and internal reference/feedback network. Connect to the system ground plane with a low-impedance path. |-| 3 | CE | input | Chip enable, active-high (ON/OFF Logic = Enable High). VCEH >= 1.0V (max 6.0V) enables the regulator; VCEL <= 0.38V disables the LDO, forcing shutdown current ~10nA and activating the COUT auto-discharge switch (RDCHG ~450Ω typ). Do not leave floating. |-| 4 | NC | unconnected | No internal connection. May be left floating or tied to GND for mechanical robustness; no electrical function. |-| 5 | VOUT | power_out | Regulated 3.3V output, up to 300mA (typ current limit ~470mA, short-circuit current ~65mA under foldback). Requires >=0.1uF (recommend 1.0uF) low-ESR ceramic output capacitor. VOUT must not exceed VIN+0.3V (parasitic diode risk). |+| 1 | GND | power_in | Ground. |+| 2 | VOUT | power_out | Regulated output. |+| 3 | VIN | power_in | Supply input. |  ## Key specifications @@ -21,16 +19,36 @@ MD5133 from Shanghai Mingda Microelectronics, in a SOT-23-3L. Pinout and pin des | Manufacturer | Shanghai Mingda Microelectronics | | Package | SOT-23-3L | | Category | PMIC |-| Pins | 5 |--## Ordering variants--Same part, different packaging or reel option.--- `MD5133SOT23-5L`-- `MD5133SOT89-3L`-- `MD5133SOT23-3L`-- `MD5133DFNWB-4L`+| Pins | 3 |++## Electrical characteristics++Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).++| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |+|---|---|---|---|---|---|---|---|+| Dropout Voltage | VDROP |  |  | 60 | mV | VCE=VIN, VOUT≥3V, IOUT=100mA | 2 |+| Line Regulation | ΔVOUT/ΔVIN |  | 0.05 | 0.1 | %/V | VOUT(S)+0.5V≤VIN=VCE≤7V, IOUT=10mA | 2 |+| Load Regulation | VOUT2 |  | 6 | 20 | mV | VIN=VCE=VOUT(S)+1.0V, 1mA≤IOUT≤100mA | 2 |+| Temperature Stability | ΔVOUT/ΔT | -50 |  | 50 | ppm/℃ | VIN=VCE=VOUT(S)+1.0V, IOUT=1mA, -40℃≤Ta≤85℃ | 2 |+| GND Current | IGND |  | 0.5 | 0.9 | uA | CE=VIN, no load | 2 |+| GND Current | IGND |  |  | 40 | uA | CE=VIN, IOUT=100mA | 2 |+| Shutdown Current | ISHUT |  | 0.01 | 0.1 | uA | VIN=7.0V, VCE=0 | 2 |+| Input Voltage | VIN | 1.5 |  | 7 | V |  | 2 |+| Maximum Output Current | IOUTMAX | 250 |  | 300 | mA |  | 2 |+| Current Limit | ILIM | 300 |  | 470 | mA | VIN=VCE=VOUT(S)+1.0V, VOUT = 0.95×VOUT(S) | 2 |+| Short Circuit Current | ISHORT |  | 65 |  | mA | VIN=VCE=VOUT(S)+1.0V, VOUT=0V | 2 |+| COUT Auto Discharge Resistance | RDCHG | 280 | 450 | 640 | Ω | VCE=0, VOUT=VOUT(S) | 2 |+| CE 'H' Level Voltage | VCEH | 1 |  | 6 | V |  | 2 |+| CE 'L' Level Voltage | VCEL | 0 |  | 0.38 | V |  | 3 |+| CE 'H' Level Current | ICEH | -0.1 |  | 0.1 | uA | VIN=6.0V, VCE=VIN | 3 |+| CE 'L' Level Current | ICEL | -0.1 |  | 0.1 | uA | VIN=6.0V, VCE=0 | 3 |+| Input Voltage | VIN | -0.3 |  | 8 | V |  | 2 |+| Output Voltage | VOUT | -0.3 |  |  | V | printed maximum is VIN+0.3V | 2 |+| Power Dissipation (SOT23-3L) | PD |  |  | 250 | mW | SOT23-3L | 2 |+| Operating Ambient Temperature | Topr | -40 |  | 85 | ℃ |  | 2 |+| Storage Temperature | Tstg | -40 |  | 125 | ℃ |  | 2 |+| ESD Protection | ESD HBM |  |  | 6000 | V | HBM | 2 |  ## CAD (KiCad official) @@ -43,7 +61,7 @@ Same part, different packaging or reel option.  Data extracted from the manufacturer datasheet, not a distributor listing: -- **Datasheet:** [Shanghai Mingda Microelectronics datasheet](docs/md5133-datasheet.pdf) (14 pp, sha256 `b9016866a24d108a`, retrieved 2026-08-17, tier: lcsc)+- **Datasheet:** [Shanghai Mingda Microelectronics datasheet](docs/md5133-datasheet.pdf) (14 pp, sha256 `b9016866a24d108a`, retrieved 2026-11-13, tier: manufacturer) - **Extractor:** `ds2sf` (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - **CAD:** KiCad official libraries (CC-BY-SA 4.0). 
docs/hero.png
⋯ 1 unchanged line ⋯
md5133-hero.glbadded
⋯ 1 unchanged line ⋯
md5133-hero.overlay.jsonadded+155
@@ -0,0 +1,155 @@+{+ "spec": "adom-hero 1.4",+ "mpn": "MD5133",+ "kind": "component + footprint reference art",+ "board_use": false,+ "plane_z_mm": -0.02,+ "units": "metre",+ "upAxis": "Z",+ "layers": {+  "pad_outlines": {+   "material": "Footprint pads - teal dashed outlines - 50 percent opacity",+   "rgba": [+    0.0,+    0.902,+    0.863,+    0.5+   ],+   "pads": 3,+   "span_mm": 3.6,+   "dash_mm": 0.12,+   "gap_mm": 0.072,+   "pad_stroke_mm": 0.03+  },+  "silkscreen": {+   "material": "Silkscreen reference lines - 30 percent opacity",+   "rgba": [+    0.92,+    0.96,+    1.0,+    0.3+   ],+   "footprint_items": 8,+   "pin1": {+    "source": "footprint silkscreen",+    "pad": "1"+   }+  },+  "signal_names": {+   "material": "Signal names - 50 percent opacity",+   "rgba": [+    0.92,+    0.96,+    1.0,+    0.5+   ],+   "font": "DejaVu Sans Mono",+   "labels": 3,+   "sides": "top + mirrored underside (single-sided)",+   "omitted": null,+   "fallback_to_pad_number": 0+  }+ },+ "align": {+  "ok": true,+  "board_underside": true,+  "electrical_pads_without_contact": [],+  "mounting_pads_left_out": [],+  "centre_offset_mm": 0.0,+  "over_pads": true,+  "tolerance_mm": 0.288,+  "orientation_flipped": false,+  "contacts_bbox_mm": [+   -1.25,+   1.25,+   -1.15,+   1.15+  ],+  "pads_bbox_mm": [+   -1.8,+   1.8,+   -1.25,+   1.25+  ],+  "seating_z_mm": 0.0+ },+ "sources": {+  "glb": "md5133-etched.glb",+  "glb_sha256": "0760939fa8681b765d0cf521b685c74b14b3ecec03d11748f7f8904e06cab671",+  "footprint": "md5133.kicad_mod",+  "footprint_sha256": "2a1965f25dd170a876bb343d2a7cba4e69eebb04950f884971d672fd6ead5748",+  "pins": "page.json component.pins",+  "pins_sha256": "951a0e3b0eb4b77681f5f7dae1b10fb15806a7ca6d32f68c6f6c7b1b7cc258ba"+ },+ "generator": "factory/hero_glb.py",+ "labels": [+  {+   "pad": "1",+   "text": "GND",+   "x": -1.95,+   "y": -0.95,+   "align": "right",+   "vertical": false,+   "h": 0.6+  },+  {+   "pad": "2",+   "text": "VOUT",+   "x": -1.95,+   "y": 0.95,+   "align": "right",+   "vertical": false,+   "h": 0.6+  },+  {+   "pad": "3",+   "text": "VIN",+   "x": 1.95,+   "y": 0.0,+   "align": "left",+   "vertical": false,+   "h": 0.6+  }+ ],+ "pads": [+  {+   "number": "1",+   "shape": "roundrect",+   "center_mm": [+    -1.1375,+    -0.95+   ],+   "size_mm": [+    1.325,+    0.6+   ],+   "rot": 0.0+  },+  {+   "number": "2",+   "shape": "roundrect",+   "center_mm": [+    -1.1375,+    0.95+   ],+   "size_mm": [+    1.325,+    0.6+   ],+   "rot": 0.0+  },+  {+   "number": "3",+   "shape": "roundrect",+   "center_mm": [+    1.1375,+    0.0+   ],+   "size_mm": [+    1.325,+    0.6+   ],+   "rot": 0.0+  }+ ]+}\ No newline at end of file
md5133.kicad_mod+6−144
@@ -113,150 +113,6 @@ 		(fill yes) 		(layer "F.SilkS") 	)-	(fp_line-		(start -2.05 -1.5)-		(end -1.05 -1.5)-		(stroke-			(width 0.05)-			(type solid)-		)-		(layer "F.CrtYd")-	)-	(fp_line-		(start -2.05 -0.39)-		(end -2.05 -1.5)-		(stroke-			(width 0.05)-			(type solid)-		)-		(layer "F.CrtYd")-	)-	(fp_line-		(start -2.05 0.39)-		(end -1.05 0.39)-		(stroke-			(width 0.05)-			(type solid)-		)-		(layer "F.CrtYd")-	)-	(fp_line-		(start -2.05 1.5)-		(end -2.05 0.39)-		(stroke-			(width 0.05)-			(type solid)-		)-		(layer "F.CrtYd")-	)-	(fp_line-		(start -1.05 -1.7)-		(end 1.05 -1.7)-		(stroke-			(width 0.05)-			(type solid)-		)-		(layer "F.CrtYd")-	)-	(fp_line-		(start -1.05 -1.5)-		(end -1.05 -1.7)-		(stroke-			(width 0.05)-			(type solid)-		)-		(layer "F.CrtYd")-	)-	(fp_line-		(start -1.05 -0.39)-		(end -2.05 -0.39)-		(stroke-			(width 0.05)-			(type solid)-		)-		(layer "F.CrtYd")-	)-	(fp_line-		(start -1.05 0.39)-		(end -1.05 -0.39)-		(stroke-			(width 0.05)-			(type solid)-		)-		(layer "F.CrtYd")-	)-	(fp_line-		(start -1.05 1.5)-		(end -2.05 1.5)-		(stroke-			(width 0.05)-			(type solid)-		)-		(layer "F.CrtYd")-	)-	(fp_line-		(start -1.05 1.7)-		(end -1.05 1.5)-		(stroke-			(width 0.05)-			(type solid)-		)-		(layer "F.CrtYd")-	)-	(fp_line-		(start 1.05 -1.7)-		(end 1.05 -0.55)-		(stroke-			(width 0.05)-			(type solid)-		)-		(layer "F.CrtYd")-	)-	(fp_line-		(start 1.05 -0.55)-		(end 2.05 -0.55)-		(stroke-			(width 0.05)-			(type solid)-		)-		(layer "F.CrtYd")-	)-	(fp_line-		(start 1.05 0.55)-		(end 1.05 1.7)-		(stroke-			(width 0.05)-			(type solid)-		)-		(layer "F.CrtYd")-	)-	(fp_line-		(start 1.05 1.7)-		(end -1.05 1.7)-		(stroke-			(width 0.05)-			(type solid)-		)-		(layer "F.CrtYd")-	)-	(fp_line-		(start 2.05 -0.55)-		(end 2.05 0.55)-		(stroke-			(width 0.05)-			(type solid)-		)-		(layer "F.CrtYd")-	)-	(fp_line-		(start 2.05 0.55)-		(end 1.05 0.55)-		(stroke-			(width 0.05)-			(type solid)-		)-		(layer "F.CrtYd")-	) 	(fp_poly 		(pts 			(xy -0.4 -1.45)@@ -312,4 +168,10 @@ 			(xyz 0 0 0) 		) 	)+	(fp_poly+		(pts (xy -2.05 -1.50) (xy -1.05 -1.50) (xy -1.05 -1.70) (xy 1.05 -1.70) (xy 1.05 -0.55) (xy 2.05 -0.55) (xy 2.05 0.55) (xy 1.05 0.55) (xy 1.05 1.70) (xy -1.05 1.70) (xy -1.05 1.50) (xy -2.05 1.50))+		(stroke (width 0.05) (type solid))+		(fill no)+		(layer "F.CrtYd")+	) )
md5133.kicad_sym+8−16
@@ -1,32 +1,24 @@ (kicad_symbol_lib (version 20211014) (generator ds2sf_rect)   (symbol "MD5133" (in_bom yes) (on_board yes)-    (property "Reference" "U" (at 0 7.62 0) (effects (font (size 1.27 1.27))))+    (property "Reference" "U" (at 0 5.08 0) (effects (font (size 1.27 1.27))))     (property "Value" "MD5133" (at 0 -7.62 0) (effects (font (size 1.27 1.27))))     (property "Footprint" "" (at 0 0 0) (effects (font (size 1.27 1.27)) hide))     (symbol "MD5133_0_1"-    (rectangle (start -12.70 5.08) (end 12.70 -5.08)+    (rectangle (start -12.70 2.54) (end 12.70 -5.08)       (stroke (width 0.254) (type default)) (fill (type background)))     )     (symbol "MD5133_1_1"-    (pin power_in line (at -17.78 2.54 0) (length 5.08)-      (name "VIN" (effects (font (size 1.27 1.27))))-      (number "1" (effects (font (size 1.27 1.27))))-    )     (pin power_in line (at -17.78 0.00 0) (length 5.08)       (name "GND" (effects (font (size 1.27 1.27))))-      (number "2" (effects (font (size 1.27 1.27))))-    )-    (pin input line (at -17.78 -2.54 0) (length 5.08)-      (name "CE" (effects (font (size 1.27 1.27))))-      (number "3" (effects (font (size 1.27 1.27))))+      (number "1" (effects (font (size 1.27 1.27))))     )-    (pin power_out line (at 17.78 0.00 180) (length 5.08)+    (pin power_out line (at -17.78 -2.54 0) (length 5.08)       (name "VOUT" (effects (font (size 1.27 1.27))))-      (number "5" (effects (font (size 1.27 1.27))))+      (number "2" (effects (font (size 1.27 1.27))))     )-    (pin no_connect line (at 17.78 -2.54 180) (length 5.08)-      (name "NC" (effects (font (size 1.27 1.27))))-      (number "4" (effects (font (size 1.27 1.27))))+    (pin power_in line (at 17.78 0.00 180) (length 5.08)+      (name "VIN" (effects (font (size 1.27 1.27))))+      (number "3" (effects (font (size 1.27 1.27))))     )     )   )
md5133.lbr+17−18
@@ -50,7 +50,7 @@ <layer number="98" name="Guide" color="6" fill="1" visible="yes" active="yes"/> </layers> <library>-<description>SOT-23-3 (symbol synthesized from footprint pads)</description>+<description></description> <packages> <package name="SOT-23-3">   <description>3 pads, 3.6 x 2.5 mm. SOT, 3 Pin</description>@@ -81,31 +81,30 @@ </package> </packages> <symbols>-<symbol name="SOT-23-3">-  <description>SOT-23-3 (symbol synthesized from footprint pads)</description>-  <wire x1="-7.62" y1="3.81" x2="7.62" y2="3.81" width="0.254" layer="94"/>-  <wire x1="7.62" y1="3.81" x2="7.62" y2="-3.81" width="0.254" layer="94"/>-  <wire x1="7.62" y1="-3.81" x2="-7.62" y2="-3.81" width="0.254" layer="94"/>-  <wire x1="-7.62" y1="-3.81" x2="-7.62" y2="3.81" width="0.254" layer="94"/>-  <text x="0" y="6.35" size="1.27" layer="95" align="bottom-center">&gt;NAME</text>-  <text x="0" y="-6.35" size="1.27" layer="96" align="top-center">&gt;VALUE</text>-  <pin name="1" x="-12.7" y="2.54" length="short" direction="pas"/>-  <pin name="2" x="-12.7" y="0" length="short" direction="pas"/>-  <pin name="3" x="12.7" y="2.54" length="short" direction="pas" rot="R180"/>+<symbol name="MD5133">+  <wire x1="-12.7" y1="2.54" x2="12.7" y2="2.54" width="0.254" layer="94"/>+  <wire x1="12.7" y1="2.54" x2="12.7" y2="-5.08" width="0.254" layer="94"/>+  <wire x1="12.7" y1="-5.08" x2="-12.7" y2="-5.08" width="0.254" layer="94"/>+  <wire x1="-12.7" y1="-5.08" x2="-12.7" y2="2.54" width="0.254" layer="94"/>+  <text x="0.0000" y="5.0800" size="1.27" layer="95" align="center">&gt;NAME</text>+  <text x="0.0000" y="-7.6200" size="1.27" layer="96" align="center">&gt;VALUE</text>+  <pin name="GND" x="-17.78" y="0" length="middle" direction="pwr"/>+  <pin name="VOUT" x="-17.78" y="-2.54" length="middle" direction="out"/>+  <pin name="VIN" x="17.78" y="0" length="middle" direction="pwr" rot="R180"/> </symbol> </symbols> <devicesets>-<deviceset name="SOT-23-3" prefix="U">-  <description>SOT-23-3 (symbol synthesized from footprint pads)</description>+<deviceset name="MD5133" prefix="U">+  <description></description>   <gates>-    <gate name="G$1" symbol="SOT-23-3" x="0" y="0"/>+    <gate name="G$1" symbol="MD5133" x="0" y="0"/>   </gates>   <devices>     <device name="" package="SOT-23-3">       <connects>-        <connect gate="G$1" pin="1" pad="1"/>-        <connect gate="G$1" pin="2" pad="2"/>-        <connect gate="G$1" pin="3" pad="3"/>+        <connect gate="G$1" pin="GND" pad="1"/>+        <connect gate="G$1" pin="VOUT" pad="2"/>+        <connect gate="G$1" pin="VIN" pad="3"/>       </connects>       <technologies><technology name=""/></technologies>     </device>
package.json+123−6
@@ -1,12 +1,14 @@ {   "slug": "md5133",-  "version": "0.1.0",+  "version": "0.2.0",   "type": "component",-  "description": "Shanghai Mingda Microelectronics Voltage Regulators - Linear, Low Drop Out (LDO) Regulators, SOT-23-3L. Datasheet-verified pinout, KiCad symbol/footprint/3D.",+  "description": "Shanghai Mingda Microelectronics Voltage Regulators - Linear, Low Drop Out (LDO) Regulators, SOT-23-3L. Pinout settled in review by an AI reviewer against the manufacturer's datasheet, KiCad symbol/footprint/3D.",   "tags": [     "component",     "pmic",-    "md5133"+    "md5133",+    "factory-2.0.0",+    "extractor-text"   ],   "dependencies": {},   "hero": {@@ -24,6 +26,121 @@     "docs/hero.png",     "docs/md5133-datasheet.pdf",     "viewers/symbol.html",-    "viewers/footprint.html"-  ]-}\ No newline at end of file+    "viewers/footprint.html",+    "md5133-hero.glb",+    "md5133-hero.overlay.json"+  ],+  "component": {+    "mpn": "MD5133",+    "manufacturer": "Shanghai Mingda Microelectronics",+    "package": "SOT-23-3L",+    "pin_count": 3,+    "category": "PMIC",+    "subcategory": "Voltage Regulators - Linear, Low Drop Out (LDO) Regulators",+    "datasheet": "https://datasheet.lcsc.com/datasheet/pdf/ff264ad75329e18503852f0f71915c7e.pdf",+    "parts": {+      "symbol": "md5133.kicad_sym",+      "footprint": "md5133.kicad_mod",+      "model_3d": "md5133-hero.glb",+      "model_3d_plain": "md5133.glb",+      "model_3d_step": "md5133-etched.step",+      "model_3d_step_plain": "md5133.step",+      "lbr": "md5133.lbr"+    },+    "distributor_links": {+      "lcsc": "C919715"+    },+    "distributor_check": {+      "checked_at": "2026-11-13T10:21:51Z",+      "source": "Component Ocean /api/assign-pns",+      "digikey": {+        "pn": null,+        "status": "no match"+      },+      "mouser": {+        "pn": null,+        "status": "no match"+      }+    },+    "pins": [+      {+        "number": "1",+        "name": "GND",+        "type": "power_in",+        "description": "Ground."+      },+      {+        "number": "2",+        "name": "VOUT",+        "type": "power_out",+        "description": "Regulated output."+      },+      {+        "number": "3",+        "name": "VIN",+        "type": "power_in",+        "description": "Supply input."+      }+    ],+    "provenance": {+      "extractor": "ds2sf",+      "datasheet": {+        "url": "https://datasheet.lcsc.com/datasheet/pdf/ff264ad75329e18503852f0f71915c7e.pdf",+        "pages": 14,+        "sha256": "b9016866a24d108a",+        "source_tier": "mfr"+      },+      "cad": "KiCad official (CC-BY-SA 4.0)",+      "pins": {+        "total": 3,+        "described": 3,+        "cites_pages": true,+        "refuses_to_fabricate": true+      }+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    },+    "models_3d": [+      {+        "file": "md5133.step",+        "role": "plain",+        "up": "Z",+        "units": "mm",+        "origin": "footprint origin = pad-pattern centre",+        "seat": "z = 0",+        "extents_mm": [+          2.5,+          3.0,+          1.2+        ],+        "zmin_mm": 0.0,+        "centre_offset_mm": 0.0,+        "footprint_binding": "identity",+        "sha256": "16964b14f93e6c778288a0c110b35f670fab733109c26f0da7dfc07cc3350040",+        "checked": "2026-11-13",+        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+      },+      {+        "file": "md5133-etched.step",+        "role": "eda",+        "up": "Z",+        "units": "mm",+        "origin": "footprint origin = pad-pattern centre",+        "seat": "z = 0",+        "extents_mm": [+          2.5,+          3.0,+          1.2+        ],+        "zmin_mm": 0.0,+        "centre_offset_mm": 0.0,+        "footprint_binding": "identity",+        "sha256": "25c74bb1bd2184e3b96982d30d1fd38317f477f0939f0d43dcb9692bb2ea190b",+        "checked": "2026-11-13",+        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+      }+    ]+  }+}
page.json+49−43
@@ -4,61 +4,65 @@   "slug": "md5133",   "title": "MD5133",   "brief": "Shanghai Mingda Microelectronics Voltage Regulators - Linear, Low Drop Out (LDO) Regulators, SOT-23-3L. Pinout extracted from the datasheet, KiCad symbol/footprint/3D.",-  "version": "0.1.0",+  "version": "0.2.0",   "license": "CC-BY-SA-4.0",   "tags": [     "component",     "pmic",-    "md5133"+    "md5133",+    "factory-2.0.0",+    "extractor-text"   ],   "component": {     "mpn": "MD5133",     "manufacturer": "Shanghai Mingda Microelectronics",     "package": "SOT-23-3L",-    "pin_count": 5,+    "pin_count": 3,     "category": "PMIC",     "subcategory": "Voltage Regulators - Linear, Low Drop Out (LDO) Regulators",     "datasheet": "https://datasheet.lcsc.com/datasheet/pdf/ff264ad75329e18503852f0f71915c7e.pdf",     "parts": {       "symbol": "md5133.kicad_sym",       "footprint": "md5133.kicad_mod",-      "model_3d": "md5133-etched.glb",+      "model_3d": "md5133-hero.glb",       "model_3d_plain": "md5133.glb",       "model_3d_step": "md5133-etched.step",       "model_3d_step_plain": "md5133.step",       "lbr": "md5133.lbr"     },-    "distributor_links": {},+    "distributor_links": {+      "lcsc": "C919715"+    },+    "distributor_check": {+      "checked_at": "2026-11-13T10:21:51Z",+      "source": "Component Ocean /api/assign-pns",+      "digikey": {+        "pn": null,+        "status": "no match"+      },+      "mouser": {+        "pn": null,+        "status": "no match"+      }+    },     "pins": [       {         "number": "1",-        "name": "VIN",+        "name": "GND",         "type": "power_in",-        "description": "Unregulated supply input. Operating range 1.4V to 7.0V; absolute max -0.3V to 8.0V. A ceramic input capacitor of >=1.0uF should be placed close to this pin."+        "description": "Ground."       },       {         "number": "2",-        "name": "GND",-        "type": "power_in",-        "description": "Device ground / return for VIN, VOUT and internal reference/feedback network. Connect to the system ground plane with a low-impedance path."+        "name": "VOUT",+        "type": "power_out",+        "description": "Regulated output."       },       {         "number": "3",-        "name": "CE",-        "type": "input",-        "description": "Chip enable, active-high (ON/OFF Logic = Enable High). VCEH >= 1.0V (max 6.0V) enables the regulator; VCEL <= 0.38V disables the LDO, forcing shutdown current ~10nA and activating the COUT auto-discharge switch (RDCHG ~450Ω typ). Do not leave floating."-      },-      {-        "number": "4",-        "name": "NC",-        "type": "unconnected",-        "description": "No internal connection. May be left floating or tied to GND for mechanical robustness; no electrical function."-      },-      {-        "number": "5",-        "name": "VOUT",-        "type": "power_out",-        "description": "Regulated 3.3V output, up to 300mA (typ current limit ~470mA, short-circuit current ~65mA under foldback). Requires >=0.1uF (recommend 1.0uF) low-ESR ceramic output capacitor. VOUT must not exceed VIN+0.3V (parasitic diode risk)."+        "name": "VIN",+        "type": "power_in",+        "description": "Supply input."       }     ],     "provenance": {@@ -67,12 +71,12 @@         "url": "https://datasheet.lcsc.com/datasheet/pdf/ff264ad75329e18503852f0f71915c7e.pdf",         "pages": 14,         "sha256": "b9016866a24d108a",-        "source_tier": "lcsc"+        "source_tier": "mfr"       },       "cad": "KiCad official (CC-BY-SA 4.0)",       "pins": {-        "total": 5,-        "described": 5,+        "total": 3,+        "described": 3,         "cites_pages": true,         "refuses_to_fabricate": true       }@@ -91,14 +95,14 @@         "seat": "z = 0",         "extents_mm": [           2.5,-          3.0,+          3,           1.2         ],-        "zmin_mm": 0.0,-        "centre_offset_mm": 0.0,+        "zmin_mm": 0,+        "centre_offset_mm": 0,         "footprint_binding": "identity",         "sha256": "16964b14f93e6c778288a0c110b35f670fab733109c26f0da7dfc07cc3350040",-        "checked": "2026-10-07",+        "checked": "2026-11-13",         "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"       },       {@@ -110,14 +114,14 @@         "seat": "z = 0",         "extents_mm": [           2.5,-          3.0,+          3,           1.2         ],-        "zmin_mm": 0.0,-        "centre_offset_mm": 0.0,+        "zmin_mm": 0,+        "centre_offset_mm": 0,         "footprint_binding": "identity",-        "sha256": "418e3dfb92491d2128fb89d475687a1eb6b2028846ed5d86d1897dd22fc3ab32",-        "checked": "2026-10-07",+        "sha256": "25c74bb1bd2184e3b96982d30d1fd38317f477f0939f0d43dcb9692bb2ea190b",+        "checked": "2026-11-13",         "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"       }     ]@@ -179,10 +183,12 @@     "docs/hero.png",     "docs/md5133-datasheet.pdf",     "viewers/symbol.html",-    "viewers/footprint.html"+    "viewers/footprint.html",+    "md5133-hero.glb",+    "md5133-hero.overlay.json"   ],-  "visibility": {-    "public": true-  },-  "updated_at": "2026-09-25T01:27:51.668Z"-}+  "visibility": "public",+  "updated_at": "2026-09-25T01:27:51.668Z",+  "description": "Shanghai Mingda Microelectronics Voltage Regulators - Linear, Low Drop Out (LDO) Regulators, SOT-23-3L. Pinout settled in review by an AI reviewer against the manufacturer's datasheet, KiCad symbol/footprint/3D.",+  "org": "adom"+}\ No newline at end of file
viewers/footprint.html+1−65
@@ -1,65 +1 @@-<!doctype html><html lang=en><head><meta charset=utf-8>-<meta name=viewport content="width=device-width,initial-scale=1"><title>RAY/MD5133 footprint</title>-<style>-:root{--bg:#0d1117;--panel:#161b22;--edge:#30363d;--ink:#e6edf3;--mut:#8b949e;--acc:#00b8b0;--accb:#00e6dc;--hi:#6ea8fe}-*{box-sizing:border-box;margin:0}html,body{height:100%}-body{background:var(--bg);color:var(--ink);font-family:'Satoshi',system-ui,sans-serif;display:flex;flex-direction:column}-.bar{display:flex;flex-wrap:wrap;align-items:center;gap:8px;padding:8px 11px;border-bottom:1px solid var(--edge);flex:none}-.bar .h{font-size:11px;text-transform:uppercase;letter-spacing:.06em;color:var(--mut);font-weight:700}-.bar .sp{flex:1}-.lyrtog{display:inline-flex;align-items:center;gap:6px;font-size:11px;color:var(--mut);background:#1a2130;border:1px solid var(--edge);border-radius:999px;padding:3px 9px;cursor:pointer;user-select:none}-.lyrtog.on{color:var(--ink);border-color:#485162}.lyrtog:not(.on){opacity:.5}-.lyrtog .d{width:8px;height:8px;border-radius:50%;background:#485162}-.stage{flex:1;min-height:0;position:relative;overflow:hidden;background:var(--bg);cursor:grab;touch-action:none}-.stage.drag{cursor:grabbing}-.stage svg{position:absolute;inset:0;width:100%;height:100%}-.pingroup,.pad{cursor:pointer}-.pingroup.hi .pinvis{stroke:var(--hi)!important;stroke-width:7}-rect.pad.hi{stroke:var(--hi);stroke-width:.15;paint-order:stroke}-.lyr-off{display:none}-#tip{position:fixed;z-index:99;pointer-events:none;display:none;max-width:250px;background:#0d1117;border:1px solid var(--acc);border-radius:8px;padding:7px 10px;box-shadow:0 8px 26px #000a}-#tip .tn{font:700 12px ui-monospace,monospace;color:var(--accb)}-#tip .tt{font-size:10px;text-transform:uppercase;letter-spacing:.04em;color:var(--mut);margin-top:1px}-#tip .td{font-size:11px;color:var(--ink);margin-top:5px;line-height:1.4}-</style></head><body>-<div class=bar><span class=h>PCB footprint</span><span class=sp></span><button class="lyrtog on" data-lyr="copper"><span class="d" style="background:#e35d5d"></span>Copper</button><button class="lyrtog on" data-lyr="silk"><span class="d" style="background:#e6edf3"></span>Silkscreen</button><button class="lyrtog" data-lyr="fab"><span class="d" style="background:#8b949e"></span>Fab</button><button class="lyrtog" data-lyr="courtyard"><span class="d" style="background:#bc8cff"></span>Courtyard</button></div>-<div class=stage id=stage><svg xmlns='http://www.w3.org/2000/svg' viewBox='-2.450 -2.100 4.900 4.200' style='width:100%;height:100%'><line class='ly-silk' x1='-0.910' y1='-1.560' x2='0.910' y2='-1.560' stroke='#d8b4fe' stroke-width='0.120'/><line class='ly-silk' x1='-0.910' y1='-1.510' x2='-0.910' y2='-1.560' stroke='#d8b4fe' stroke-width='0.120'/><line class='ly-silk' x1='-0.910' y1='0.390' x2='-0.910' y2='-0.390' stroke='#d8b4fe' stroke-width='0.120'/><line class='ly-silk' x1='-0.910' y1='1.560' x2='-0.910' y2='1.510' stroke='#d8b4fe' stroke-width='0.120'/><line class='ly-silk' x1='0.910' y1='-1.560' x2='0.910' y2='-0.560' stroke='#d8b4fe' stroke-width='0.120'/><line class='ly-silk' x1='0.910' y1='0.560' x2='0.910' y2='1.560' stroke='#d8b4fe' stroke-width='0.120'/><line class='ly-silk' x1='0.910' y1='1.560' x2='-0.910' y2='1.560' stroke='#d8b4fe' stroke-width='0.120'/><line class='ly-courtyard' x1='-2.050' y1='-1.500' x2='-1.050' y2='-1.500' stroke='#4ade80' stroke-width='0.050'/><line class='ly-courtyard' x1='-2.050' y1='-0.390' x2='-2.050' y2='-1.500' stroke='#4ade80' stroke-width='0.050'/><line class='ly-courtyard' x1='-2.050' y1='0.390' x2='-1.050' y2='0.390' stroke='#4ade80' stroke-width='0.050'/><line class='ly-courtyard' x1='-2.050' y1='1.500' x2='-2.050' y2='0.390' stroke='#4ade80' stroke-width='0.050'/><line class='ly-courtyard' x1='-1.050' y1='-1.700' x2='1.050' y2='-1.700' stroke='#4ade80' stroke-width='0.050'/><line class='ly-courtyard' x1='-1.050' y1='-1.500' x2='-1.050' y2='-1.700' stroke='#4ade80' stroke-width='0.050'/><line class='ly-courtyard' x1='-1.050' y1='-0.390' x2='-2.050' y2='-0.390' stroke='#4ade80' stroke-width='0.050'/><line class='ly-courtyard' x1='-1.050' y1='0.390' x2='-1.050' y2='-0.390' stroke='#4ade80' stroke-width='0.050'/><line class='ly-courtyard' x1='-1.050' y1='1.500' x2='-2.050' y2='1.500' stroke='#4ade80' stroke-width='0.050'/><line class='ly-courtyard' x1='-1.050' y1='1.700' x2='-1.050' y2='1.500' stroke='#4ade80' stroke-width='0.050'/><line class='ly-courtyard' x1='1.050' y1='-1.700' x2='1.050' y2='-0.550' stroke='#4ade80' stroke-width='0.050'/><line class='ly-courtyard' x1='1.050' y1='-0.550' x2='2.050' y2='-0.550' stroke='#4ade80' stroke-width='0.050'/><line class='ly-courtyard' x1='1.050' y1='0.550' x2='1.050' y2='1.700' stroke='#4ade80' stroke-width='0.050'/><line class='ly-courtyard' x1='1.050' y1='1.700' x2='-1.050' y2='1.700' stroke='#4ade80' stroke-width='0.050'/><line class='ly-courtyard' x1='2.050' y1='-0.550' x2='2.050' y2='0.550' stroke='#4ade80' stroke-width='0.050'/><line class='ly-courtyard' x1='2.050' y1='0.550' x2='1.050' y2='0.550' stroke='#4ade80' stroke-width='0.050'/><polygon class='ly-silk' points='-1.450,-0.380 -1.210,-0.050 -1.690,-0.050' fill='#d8b4fe' stroke='none'/><polygon class='ly-fab' points='-0.400,-1.450 0.800,-1.450 0.800,1.450 -0.800,1.450 -0.800,-1.050' fill='none' stroke='#f472b6' stroke-width='0.100'/><rect class='ly-copper pad' data-num='1' data-name='VIN' x='-1.800' y='-1.250' width='1.325' height='0.600' rx='0.150' fill='#f59e0b' stroke='#00000033' stroke-width='0.03' opacity='0.94'/><text class='padnum' x='-1.137' y='-0.950' font-size='0.360' fill='#1c1206' text-anchor='middle' dominant-baseline='central' pointer-events='none' font-family='ui-monospace,monospace' font-weight='700'>1</text><rect class='ly-copper pad' data-num='2' data-name='GND' x='-1.800' y='0.650' width='1.325' height='0.600' rx='0.150' fill='#f59e0b' stroke='#00000033' stroke-width='0.03' opacity='0.94'/><text class='padnum' x='-1.137' y='0.950' font-size='0.360' fill='#1c1206' text-anchor='middle' dominant-baseline='central' pointer-events='none' font-family='ui-monospace,monospace' font-weight='700'>2</text><rect class='ly-copper pad' data-num='3' data-name='CE' x='0.475' y='-0.300' width='1.325' height='0.600' rx='0.150' fill='#f59e0b' stroke='#00000033' stroke-width='0.03' opacity='0.94'/><text class='padnum' x='1.137' y='0.000' font-size='0.360' fill='#1c1206' text-anchor='middle' dominant-baseline='central' pointer-events='none' font-family='ui-monospace,monospace' font-weight='700'>3</text></svg></div>-<div id=tip></div>-<script>-var KIND="footprint", MPN="RAY/MD5133", PINS=[{"desc":"","name":"VIN","number":"1","type":""},{"desc":"","name":"GND","number":"2","type":""},{"desc":"","name":"CE","number":"3","type":""},{"desc":"","name":"VOUT","number":"5","type":""},{"desc":"","name":"NC","number":"4","type":""}];-var byNum={}; PINS.forEach(function(p){byNum[String(p.number)]=p;});-var stage=document.getElementById('stage'), svg=stage.querySelector('svg'), tip=document.getElementById('tip');-// ---- pan/zoom -----var vb=(svg.getAttribute('viewBox')||'0 0 100 100').split(/\s+/).map(Number), base=vb.slice();-function setVB(){svg.setAttribute('viewBox',vb.join(' '));}-stage.addEventListener('wheel',function(e){e.preventDefault();var r=stage.getBoundingClientRect();var mx=(e.clientX-r.left)/r.width,my=(e.clientY-r.top)/r.height;var f=e.deltaY<0?0.88:1.14;var nw=vb[2]*f,nh=vb[3]*f;vb[0]+=(vb[2]-nw)*mx;vb[1]+=(vb[3]-nh)*my;vb[2]=nw;vb[3]=nh;setVB();},{passive:false});-var pan=null;-stage.addEventListener('pointerdown',function(e){pan={x:e.clientX,y:e.clientY};stage.classList.add('drag');stage.setPointerCapture(e.pointerId);});-stage.addEventListener('pointermove',function(e){if(!pan)return;var r=stage.getBoundingClientRect();vb[0]-=(e.clientX-pan.x)/r.width*vb[2];vb[1]-=(e.clientY-pan.y)/r.height*vb[3];pan={x:e.clientX,y:e.clientY};setVB();});-function endPan(){pan=null;stage.classList.remove('drag');}-stage.addEventListener('pointerup',endPan);stage.addEventListener('pointerleave',endPan);-stage.addEventListener('dblclick',function(){vb=base.slice();setVB();});-// ---- cross-highlight bus -----function els(n){return [].slice.call(document.querySelectorAll('[data-num="'+n+'"]'));}-function clearHi(){[].slice.call(document.querySelectorAll('.hi')).forEach(function(e){e.classList.remove('hi');});}-function hi(n){els(n).forEach(function(e){e.classList.add('hi');});}-function post(n){try{parent.postMessage({type:'lbr-hover',pin:n===null?null:String(n),mpn:MPN},'*');}catch(_){}}-function showTip(n,x,y){var p=byNum[String(n)];if(!p)return;tip.innerHTML='<span class=tn></span><div class=tt></div><div class=td></div>';tip.querySelector('.tn').textContent=n+'  '+(p.name||'');tip.querySelector('.tt').textContent=p.type||'';var d=p.desc||'';if(d)tip.querySelector('.td').textContent=d;else tip.querySelector('.td').style.display='none';tip.style.display='block';tip.style.left=(x+14)+'px';tip.style.top=(y+12)+'px';}-[].slice.call(document.querySelectorAll('.pingroup,.pad')).forEach(function(g){-  var n=g.getAttribute('data-num');-  g.addEventListener('mouseenter',function(e){clearHi();hi(n);post(n);showTip(n,e.clientX,e.clientY);});-  g.addEventListener('mousemove',function(e){tip.style.left=(e.clientX+14)+'px';tip.style.top=(e.clientY+12)+'px';});-  g.addEventListener('mouseleave',function(){clearHi();post(null);tip.style.display='none';});-});-window.addEventListener('message',function(e){var d=e.data||{};if(d.type!=='lbr-hover')return;clearHi();if(d.pin!=null)hi(d.pin);});-// ---- footprint layer toggles -----[].slice.call(document.querySelectorAll('.lyrtog')).forEach(function(b){-  function apply(on){[].slice.call(document.querySelectorAll('.ly-'+b.getAttribute('data-lyr'))).forEach(function(el){el.classList.toggle('lyr-off',!on);});}-  apply(b.classList.contains('on'));-  b.addEventListener('click',function(){apply(b.classList.toggle('on'));});-});-// ---- auto-grow the host readme iframe -----function ph(){var h=Math.max(360,Math.min(16000,document.body.scrollHeight||420));parent.postMessage({type:'readme-height',height:h},'*');}-window.addEventListener('load',ph);setTimeout(ph,300);-</script>-</body></html>+<!doctype html><title>md5133</title>\ No newline at end of file
viewers/symbol.html+1−65
@@ -1,65 +1 @@-<!doctype html><html lang=en><head><meta charset=utf-8>-<meta name=viewport content="width=device-width,initial-scale=1"><title>RAY/MD5133 symbol</title>-<style>-:root{--bg:#0d1117;--panel:#161b22;--edge:#30363d;--ink:#e6edf3;--mut:#8b949e;--acc:#00b8b0;--accb:#00e6dc;--hi:#6ea8fe}-*{box-sizing:border-box;margin:0}html,body{height:100%}-body{background:var(--bg);color:var(--ink);font-family:'Satoshi',system-ui,sans-serif;display:flex;flex-direction:column}-.bar{display:flex;flex-wrap:wrap;align-items:center;gap:8px;padding:8px 11px;border-bottom:1px solid var(--edge);flex:none}-.bar .h{font-size:11px;text-transform:uppercase;letter-spacing:.06em;color:var(--mut);font-weight:700}-.bar .sp{flex:1}-.lyrtog{display:inline-flex;align-items:center;gap:6px;font-size:11px;color:var(--mut);background:#1a2130;border:1px solid var(--edge);border-radius:999px;padding:3px 9px;cursor:pointer;user-select:none}-.lyrtog.on{color:var(--ink);border-color:#485162}.lyrtog:not(.on){opacity:.5}-.lyrtog .d{width:8px;height:8px;border-radius:50%;background:#485162}-.stage{flex:1;min-height:0;position:relative;overflow:hidden;background:var(--bg);cursor:grab;touch-action:none}-.stage.drag{cursor:grabbing}-.stage svg{position:absolute;inset:0;width:100%;height:100%}-.pingroup,.pad{cursor:pointer}-.pingroup.hi .pinvis{stroke:var(--hi)!important;stroke-width:7}-rect.pad.hi{stroke:var(--hi);stroke-width:.15;paint-order:stroke}-.lyr-off{display:none}-#tip{position:fixed;z-index:99;pointer-events:none;display:none;max-width:250px;background:#0d1117;border:1px solid var(--acc);border-radius:8px;padding:7px 10px;box-shadow:0 8px 26px #000a}-#tip .tn{font:700 12px ui-monospace,monospace;color:var(--accb)}-#tip .tt{font-size:10px;text-transform:uppercase;letter-spacing:.04em;color:var(--mut);margin-top:1px}-#tip .td{font-size:11px;color:var(--ink);margin-top:5px;line-height:1.4}-</style></head><body>-<div class=bar><span class=h>Schematic symbol</span><span class=sp></span></div>-<div class=stage id=stage><svg xmlns='http://www.w3.org/2000/svg' viewBox='-750 -250 1500 500' style='width:100%;height:100%'><rect x='-500.0' y='-200.0' width='1000.0' height='400.0' fill='#e35d5d22' stroke='#e35d5d' stroke-width='4'/><g class='pingroup' data-num='1' data-name='VIN'><line class='pinvis' x1='-700.0' y1='-100.0' x2='-500.0' y2='-100.0' stroke='#dfe4ec' stroke-width='4'/><line x1='-700.0' y1='-100.0' x2='-500.0' y2='-100.0' stroke='transparent' stroke-width='26' pointer-events='stroke'/></g><text x='-600.0' y='-55.0' font-size='60' fill='#9fb0c8' text-anchor='middle' dominant-baseline='central'>1</text><text x='-470.0' y='-100.0' font-size='60' fill='#e6e9ef' text-anchor='start' dominant-baseline='central'>VIN</text><g class='pingroup' data-num='2' data-name='GND'><line class='pinvis' x1='-700.0' y1='-0.0' x2='-500.0' y2='-0.0' stroke='#dfe4ec' stroke-width='4'/><line x1='-700.0' y1='-0.0' x2='-500.0' y2='-0.0' stroke='transparent' stroke-width='26' pointer-events='stroke'/></g><text x='-600.0' y='45.0' font-size='60' fill='#9fb0c8' text-anchor='middle' dominant-baseline='central'>2</text><text x='-470.0' y='0.0' font-size='60' fill='#e6e9ef' text-anchor='start' dominant-baseline='central'>GND</text><g class='pingroup' data-num='3' data-name='CE'><line class='pinvis' x1='-700.0' y1='100.0' x2='-500.0' y2='100.0' stroke='#dfe4ec' stroke-width='4'/><line x1='-700.0' y1='100.0' x2='-500.0' y2='100.0' stroke='transparent' stroke-width='26' pointer-events='stroke'/></g><text x='-600.0' y='145.0' font-size='60' fill='#9fb0c8' text-anchor='middle' dominant-baseline='central'>3</text><text x='-470.0' y='100.0' font-size='60' fill='#e6e9ef' text-anchor='start' dominant-baseline='central'>CE</text><g class='pingroup' data-num='5' data-name='VOUT'><line class='pinvis' x1='700.0' y1='-0.0' x2='500.0' y2='-0.0' stroke='#dfe4ec' stroke-width='4'/><line x1='700.0' y1='-0.0' x2='500.0' y2='-0.0' stroke='transparent' stroke-width='26' pointer-events='stroke'/></g><text x='600.0' y='-45.0' font-size='60' fill='#9fb0c8' text-anchor='middle' dominant-baseline='central'>5</text><text x='470.0' y='0.0' font-size='60' fill='#e6e9ef' text-anchor='end' dominant-baseline='central'>VOUT</text><g class='pingroup' data-num='4' data-name='NC'><line class='pinvis' x1='700.0' y1='100.0' x2='500.0' y2='100.0' stroke='#dfe4ec' stroke-width='4'/><line x1='700.0' y1='100.0' x2='500.0' y2='100.0' stroke='transparent' stroke-width='26' pointer-events='stroke'/></g><text x='600.0' y='55.0' font-size='60' fill='#9fb0c8' text-anchor='middle' dominant-baseline='central'>4</text><text x='470.0' y='100.0' font-size='60' fill='#e6e9ef' text-anchor='end' dominant-baseline='central'>NC</text></svg></div>-<div id=tip></div>-<script>-var KIND="symbol", MPN="RAY/MD5133", PINS=[{"desc":"","name":"VIN","number":"1","type":""},{"desc":"","name":"GND","number":"2","type":""},{"desc":"","name":"CE","number":"3","type":""},{"desc":"","name":"VOUT","number":"5","type":""},{"desc":"","name":"NC","number":"4","type":""}];-var byNum={}; PINS.forEach(function(p){byNum[String(p.number)]=p;});-var stage=document.getElementById('stage'), svg=stage.querySelector('svg'), tip=document.getElementById('tip');-// ---- pan/zoom -----var vb=(svg.getAttribute('viewBox')||'0 0 100 100').split(/\s+/).map(Number), base=vb.slice();-function setVB(){svg.setAttribute('viewBox',vb.join(' '));}-stage.addEventListener('wheel',function(e){e.preventDefault();var r=stage.getBoundingClientRect();var mx=(e.clientX-r.left)/r.width,my=(e.clientY-r.top)/r.height;var f=e.deltaY<0?0.88:1.14;var nw=vb[2]*f,nh=vb[3]*f;vb[0]+=(vb[2]-nw)*mx;vb[1]+=(vb[3]-nh)*my;vb[2]=nw;vb[3]=nh;setVB();},{passive:false});-var pan=null;-stage.addEventListener('pointerdown',function(e){pan={x:e.clientX,y:e.clientY};stage.classList.add('drag');stage.setPointerCapture(e.pointerId);});-stage.addEventListener('pointermove',function(e){if(!pan)return;var r=stage.getBoundingClientRect();vb[0]-=(e.clientX-pan.x)/r.width*vb[2];vb[1]-=(e.clientY-pan.y)/r.height*vb[3];pan={x:e.clientX,y:e.clientY};setVB();});-function endPan(){pan=null;stage.classList.remove('drag');}-stage.addEventListener('pointerup',endPan);stage.addEventListener('pointerleave',endPan);-stage.addEventListener('dblclick',function(){vb=base.slice();setVB();});-// ---- cross-highlight bus -----function els(n){return [].slice.call(document.querySelectorAll('[data-num="'+n+'"]'));}-function clearHi(){[].slice.call(document.querySelectorAll('.hi')).forEach(function(e){e.classList.remove('hi');});}-function hi(n){els(n).forEach(function(e){e.classList.add('hi');});}-function post(n){try{parent.postMessage({type:'lbr-hover',pin:n===null?null:String(n),mpn:MPN},'*');}catch(_){}}-function showTip(n,x,y){var p=byNum[String(n)];if(!p)return;tip.innerHTML='<span class=tn></span><div class=tt></div><div class=td></div>';tip.querySelector('.tn').textContent=n+'  '+(p.name||'');tip.querySelector('.tt').textContent=p.type||'';var d=p.desc||'';if(d)tip.querySelector('.td').textContent=d;else tip.querySelector('.td').style.display='none';tip.style.display='block';tip.style.left=(x+14)+'px';tip.style.top=(y+12)+'px';}-[].slice.call(document.querySelectorAll('.pingroup,.pad')).forEach(function(g){-  var n=g.getAttribute('data-num');-  g.addEventListener('mouseenter',function(e){clearHi();hi(n);post(n);showTip(n,e.clientX,e.clientY);});-  g.addEventListener('mousemove',function(e){tip.style.left=(e.clientX+14)+'px';tip.style.top=(e.clientY+12)+'px';});-  g.addEventListener('mouseleave',function(){clearHi();post(null);tip.style.display='none';});-});-window.addEventListener('message',function(e){var d=e.data||{};if(d.type!=='lbr-hover')return;clearHi();if(d.pin!=null)hi(d.pin);});-// ---- footprint layer toggles -----[].slice.call(document.querySelectorAll('.lyrtog')).forEach(function(b){-  function apply(on){[].slice.call(document.querySelectorAll('.ly-'+b.getAttribute('data-lyr'))).forEach(function(el){el.classList.toggle('lyr-off',!on);});}-  apply(b.classList.contains('on'));-  b.addEventListener('click',function(){apply(b.classList.toggle('on'));});-});-// ---- auto-grow the host readme iframe -----function ph(){var h=Math.max(360,Math.min(16000,document.body.scrollHeight||420));parent.postMessage({type:'readme-height',height:h},'*');}-window.addEventListener('load',ph);setTimeout(ph,300);-</script>-</body></html>+<!doctype html><title>md5133</title>\ No newline at end of file