← Commit history
README.md+40−29
@@ -2,17 +2,17 @@  **Shanghai Mingda Microelectronics** · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · XDFN-4-EP(1x1) -MD5125 from Shanghai Mingda Microelectronics, in a XDFN-4-EP(1x1). Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.+MD5125 from Shanghai Mingda Microelectronics, in a XDFN-4-EP(1x1). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.  ## Pinout  | Pin | Name | Type | Function | |---|---|---|---|-| 1 | VIN | power_in | Unregulated input supply. Operating range 1.4 V to 7.0 V (absolute max -0.3 to 8.0 V). Bypass with a >=1.0 uF ceramic capacitor as close to the pin as possible. |-| 2 | GND | power_in | Device ground / return for the internal reference, error amplifier and pass MOSFET. Quiescent GND current is typically 0.5 uA (no load). |-| 3 | CE | input | Chip-enable / ON-OFF logic input, active high. VCEH >= 1.0 V (max 6.0 V) enables the regulator; VCEL <= 0.38 V disables it and activates the COUT auto-discharge switch. Do not leave floating. |-| 4 | NC | unconnected | No internal connection on the SOT-23-5L variant. May be left floating or tied to GND for mechanical stability. |-| 5 | VOUT | power_out | Regulated 2.5 V output (MD5125), ±2% accuracy, up to 300 mA (current-limit typ 470 mA with foldback to ~65 mA short-circuit). Requires a >=0.1 uF low-ESR ceramic output capacitor (1.0 uF recommended). Do not force VOUT above VIN+0.3 V - the P-channel MOSFET's parasitic diode can be damaged. |+| 1 | VOUT | power_out | Regulated output. |+| 2 | GND | power_in | Ground. |+| 3 | CE | input | Chip enable. |+| 4 | VIN | power_in | Supply input. |+| 5 | EP | passive | Exposed pad (Mingda states no net). |  ## Key specifications @@ -23,14 +23,39 @@ MD5125 from Shanghai Mingda Microelectronics, in a XDFN-4-EP(1x1). Pinout and pi | Category | PMIC | | Pins | 5 | -## Ordering variants--Same part, different packaging or reel option.--- `MD5125SOT23-5L`-- `MD5125SOT23-3L`-- `MD5125SOT89-3L`-- `MD5125DFNWB-4L`+## Electrical characteristics++Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).++| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |+|---|---|---|---|---|---|---|---|+| Output Voltage accuracy (VOUT(S)≥2.0V) | VOUT(S) | 0.98 |  | 1.02 | V | VIN=VOUT(S)+1.0V, IOUT=10mA, VOUT(S)≥2.0V; printed as VOUT(S)0.98 / VOUT(S)1.02 | 2 |+| Dropout Voltage (VOUT<3V) | VDROP |  |  | 70 | mV | VCE=VIN, VOUT<3V, IOUT=100mA | 2 |+| Line Regulation |  |  | 0.05 | 0.1 | %/V | VOUT(S)+0.5V≤VIN=VCE≤7V, IOUT=10mA | 2 |+| Load Regulation |  |  | 6 | 20 | mV | VIN=VCE=VOUT(S)+1.0V, 1mA≤IOUT≤100mA | 2 |+| Temperature Stability |  | -50 |  | 50 | ppm/℃ | VIN=VCE=VOUT(S)+1.0V, IOUT=1mA, -40℃≤Ta≤85℃ | 2 |+| GND Current (no load) | IGND |  | 0.5 | 0.9 | uA | CE=VIN, no load | 2 |+| GND Current (IOUT=100mA) | IGND |  |  | 40 | uA | CE=VIN, IOUT=100mA | 2 |+| Shutdown Current | ISHUT |  | 0.01 | 0.1 | uA | VIN=7.0V, VCE=0 | 2 |+| Input Voltage | VIN | 1.5 |  | 7 | V |  | 2 |+| Maximum Output Current | IOUTMAX | 250 |  | 300 | mA |  | 2 |+| Current Limit | ILIM | 300 |  | 470 | mA | VIN=VCE=VOUT(S)+1.0V, VOUT=0.95×VOUT(S) | 2 |+| COUT Auto Discharge Resistance | RDCHG | 280 | 450 | 640 | Ω | VCE=0, VOUT=VOUT(S) | 2 |+| CE 'H' Level Voltage | VCEH | 1 |  | 6 | V |  | 2 |+| CE 'L' Level Voltage | VCEL | 0 |  | 0.38 | V |  | 3 |+| CE 'H' Level Current | ICEH | -0.1 |  | 0.1 | uA | VIN=6.0V, VCE=VIN | 3 |+| CE 'L' Level Current | ICEL | -0.1 |  | 0.1 | uA | VIN=6.0V, VCE=0 | 3 |+| Input Voltage (absolute maximum) | VIN | -0.3 |  | 8 | V |  | 2 |+| Output Voltage (absolute maximum) | VOUT | -0.3 |  |  | V | Upper limit printed as VIN+0.3V (not a numeric max) | 2 |+| Power Dissipation (DFNWB-4L) | PD |  |  | 100 | mW | DFNWB-4L package | 2 |+| Operating Ambient Temperature | Topr | -40 |  | 85 | ℃ |  | 2 |+| Storage Temperature | Tstg | -40 |  | 125 | ℃ |  | 2 |+| Input Capacitor (CIN) | CIN | 1 |  |  | µF | Printed as '1.0µF above' in Notes on Use | 3 |+| Output Capacitor (COUT) | COUT | 0.1 |  |  | µF | Printed as '0.1µF above' in Notes on Use | 3 |+| Short Circuit Current | ISHORT |  | 65 |  | mA | VIN=VCE=VOUT(S)+1.0V, VOUT=0V | 2 |+| Power Supply Rejection Ratio (10Hz) | PSRR |  | 60 |  | dB | f=10Hz, VOUT(S)=2.5V | 2 |+| Power Supply Rejection Ratio (100Hz) | PSRR |  | 45 |  | dB | f=100Hz, VOUT(S)=2.5V | 2 |+| Power Supply Rejection Ratio (1kHz) | PSRR |  | 25 |  | dB | f=1kHz, VOUT(S)=2.5V | 2 |  ## CAD (KiCad official) @@ -39,25 +64,11 @@ Same part, different packaging or reel option. - 3D model: XDFN-4-EP(1x1) (KiCad packages3D, STEP) - 3D model files: `md5125-etched.step` / `md5125-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `md5125.step` / `md5125.glb` are the bare package body. -## 3D model downloads--Two STEP files. Same geometry, different body top:--| File | Size | Use it when |-|---|---|---|-| [`md5125.step`](md5125.step) | 144 KB | You want the bare part, or you mark your own boards. |-| [`md5125-etched.step`](md5125-etched.step) | 1.0 MB | You want the part with `MD5125` already on it. |--The marking in the etched file is real recessed geometry cut into the solid, not a-texture or a decal: 266 faces against 41 in the bare model. It-survives export, section views, and rendering in any CAD tool, and it drops straight-into KiCad or Fusion with no extra setup.- ## Provenance  Data extracted from the manufacturer datasheet, not a distributor listing: -- **Datasheet:** [Shanghai Mingda Microelectronics datasheet](docs/md5125-datasheet.pdf) (14 pp, sha256 `b9016866a24d108a`, retrieved 2026-08-17, tier: lcsc)+- **Datasheet:** [Shanghai Mingda Microelectronics datasheet](docs/md5125-datasheet.pdf) (14 pp, sha256 `b9016866a24d108a`, retrieved 2026-11-13, tier: manufacturer) - **Extractor:** `ds2sf` (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - **CAD:** KiCad official libraries (CC-BY-SA 4.0). 
docs/hero.png
⋯ 1 unchanged line ⋯
md5125-hero.glbadded
⋯ 1 unchanged line ⋯
md5125-hero.overlay.jsonadded+190
@@ -0,0 +1,190 @@+{+ "spec": "adom-hero 1.4",+ "mpn": "MD5125",+ "kind": "component + footprint reference art",+ "board_use": false,+ "plane_z_mm": -0.02,+ "units": "metre",+ "upAxis": "Z",+ "layers": {+  "pad_outlines": {+   "material": "Footprint pads - teal dashed outlines - 50 percent opacity",+   "rgba": [+    0.0,+    0.902,+    0.863,+    0.5+   ],+   "pads": 5,+   "span_mm": 1.49,+   "dash_mm": 0.12,+   "gap_mm": 0.072,+   "pad_stroke_mm": 0.03+  },+  "silkscreen": {+   "material": "Silkscreen reference lines - 30 percent opacity",+   "rgba": [+    0.92,+    0.96,+    1.0,+    0.3+   ],+   "footprint_items": 3,+   "pin1": {+    "source": "footprint silkscreen",+    "pad": "1"+   }+  },+  "signal_names": {+   "material": "Signal names - 50 percent opacity",+   "rgba": [+    0.92,+    0.96,+    1.0,+    0.5+   ],+   "font": "DejaVu Sans Mono",+   "labels": 4,+   "sides": "top + mirrored underside (single-sided)",+   "omitted": null,+   "fallback_to_pad_number": 0+  }+ },+ "align": {+  "ok": true,+  "board_underside": true,+  "electrical_pads_without_contact": [],+  "mounting_pads_left_out": [],+  "centre_offset_mm": 0.0,+  "over_pads": true,+  "tolerance_mm": 0.25,+  "orientation_flipped": false,+  "contacts_bbox_mm": [+   -0.501,+   0.501,+   -0.5,+   0.5+  ],+  "pads_bbox_mm": [+   -0.37,+   0.37,+   -0.455,+   0.455+  ],+  "seating_z_mm": 0.0+ },+ "sources": {+  "glb": "md5125-etched.glb",+  "glb_sha256": "73885c80becc67a920ffd30fd77a9c67d4acc5b681099fc610c80b2db90bb0a9",+  "footprint": "md5125.kicad_mod",+  "footprint_sha256": "790953a52028381c744da093f5183633cb38397d135c52531b96ef120adb9f20",+  "pins": "page.json component.pins",+  "pins_sha256": "aec9b6e18bb4602fd50295b7c9c96473506199193cbe8eafffc42a23d246a582"+ },+ "generator": "factory/hero_glb.py",+ "labels": [+  {+   "pad": "1",+   "text": "VOUT",+   "x": -0.47,+   "y": -0.325,+   "align": "right",+   "vertical": false,+   "h": 0.325+  },+  {+   "pad": "2",+   "text": "GND",+   "x": -0.47,+   "y": 0.325,+   "align": "right",+   "vertical": false,+   "h": 0.325+  },+  {+   "pad": "3",+   "text": "CE",+   "x": 0.47,+   "y": 0.325,+   "align": "left",+   "vertical": false,+   "h": 0.325+  },+  {+   "pad": "4",+   "text": "VIN",+   "x": 0.47,+   "y": -0.325,+   "align": "left",+   "vertical": false,+   "h": 0.325+  }+ ],+ "pads": [+  {+   "number": "1",+   "shape": "custom",+   "center_mm": [+    -0.485,+    -0.325+   ],+   "size_mm": [+    0.26,+    0.23+   ],+   "rot": 270.0+  },+  {+   "number": "2",+   "shape": "custom",+   "center_mm": [+    -0.485,+    0.325+   ],+   "size_mm": [+    0.26,+    0.23+   ],+   "rot": 270.0+  },+  {+   "number": "3",+   "shape": "custom",+   "center_mm": [+    0.485,+    0.325+   ],+   "size_mm": [+    0.26,+    0.23+   ],+   "rot": 90.0+  },+  {+   "number": "4",+   "shape": "custom",+   "center_mm": [+    0.485,+    -0.325+   ],+   "size_mm": [+    0.26,+    0.23+   ],+   "rot": 90.0+  },+  {+   "number": "5",+   "shape": "rect",+   "center_mm": [+    0.0,+    0.0+   ],+   "size_mm": [+    0.52,+    0.52+   ],+   "rot": 135.0+  }+ ]+}\ No newline at end of file
md5125.kicad_mod+6−40
@@ -87,46 +87,6 @@ 		(layer "F.SilkS") 		(uuid "b98c65df-fdd3-4490-ab72-321ad4dd9aa2") 	)-	(fp_line-		(start -0.87 -0.73)-		(end 0.85 -0.73)-		(stroke-			(width 0.05)-			(type solid)-		)-		(layer "F.CrtYd")-		(uuid "114c000c-98c6-402c-b9e7-97237eda839c")-	)-	(fp_line-		(start -0.87 0.73)-		(end -0.87 -0.73)-		(stroke-			(width 0.05)-			(type solid)-		)-		(layer "F.CrtYd")-		(uuid "6efc55ac-fff8-4611-807c-c091ea7bfb05")-	)-	(fp_line-		(start 0.85 -0.73)-		(end 0.85 0.73)-		(stroke-			(width 0.05)-			(type solid)-		)-		(layer "F.CrtYd")-		(uuid "008196a9-32fa-4d07-a601-216ec29e3cde")-	)-	(fp_line-		(start 0.85 0.73)-		(end -0.87 0.73)-		(stroke-			(width 0.05)-			(type solid)-		)-		(layer "F.CrtYd")-		(uuid "86604b7f-524d-4217-bf45-88bd3f861c1a")-	) 	(fp_line 		(start -0.5 -0.25) 		(end -0.25 -0.5)@@ -290,4 +250,10 @@ 			(xyz 0 0 0) 		) 	)+	(fp_poly+		(pts (xy -1.01 -0.75) (xy 1.01 -0.75) (xy 1.01 0.75) (xy -1.01 0.75))+		(stroke (width 0.05) (type solid))+		(fill no)+		(layer "F.CrtYd")+	) )
md5125.kicad_sym+6−6
@@ -8,8 +8,8 @@       (stroke (width 0.254) (type default)) (fill (type background)))     )     (symbol "MD5125_1_1"-    (pin power_in line (at -17.78 2.54 0) (length 5.08)-      (name "VIN" (effects (font (size 1.27 1.27))))+    (pin power_out line (at -17.78 2.54 0) (length 5.08)+      (name "VOUT" (effects (font (size 1.27 1.27))))       (number "1" (effects (font (size 1.27 1.27))))     )     (pin power_in line (at -17.78 0.00 0) (length 5.08)@@ -20,12 +20,12 @@       (name "CE" (effects (font (size 1.27 1.27))))       (number "3" (effects (font (size 1.27 1.27))))     )-    (pin power_out line (at 17.78 0.00 180) (length 5.08)-      (name "VOUT" (effects (font (size 1.27 1.27))))+    (pin passive line (at 17.78 0.00 180) (length 5.08)+      (name "EP" (effects (font (size 1.27 1.27))))       (number "5" (effects (font (size 1.27 1.27))))     )-    (pin no_connect line (at 17.78 -2.54 180) (length 5.08)-      (name "NC" (effects (font (size 1.27 1.27))))+    (pin power_in line (at 17.78 -2.54 180) (length 5.08)+      (name "VIN" (effects (font (size 1.27 1.27))))       (number "4" (effects (font (size 1.27 1.27))))     )     )
md5125.lbr+6−6
@@ -84,11 +84,11 @@   <wire x1="-12.7" y1="-5.08" x2="-12.7" y2="5.08" width="0.254" layer="94"/>   <text x="0.0000" y="7.6200" size="1.27" layer="95" align="center">&gt;NAME</text>   <text x="0.0000" y="-7.6200" size="1.27" layer="96" align="center">&gt;VALUE</text>-  <pin name="VIN" x="-17.78" y="2.54" length="middle" direction="pwr"/>+  <pin name="VOUT" x="-17.78" y="2.54" length="middle" direction="out"/>   <pin name="GND" x="-17.78" y="0" length="middle" direction="pwr"/>   <pin name="CE" x="-17.78" y="-2.54" length="middle" direction="in"/>-  <pin name="VOUT" x="17.78" y="0" length="middle" direction="out" rot="R180"/>-  <pin name="NC" x="17.78" y="-2.54" length="middle" direction="io" rot="R180"/>+  <pin name="EP" x="17.78" y="0" length="middle" direction="pas" rot="R180"/>+  <pin name="VIN" x="17.78" y="-2.54" length="middle" direction="pwr" rot="R180"/> </symbol> </symbols> <devicesets>@@ -100,11 +100,11 @@   <devices>     <device name="" package="OnSemi_XDFN4-1EP_1.0x1.0mm_EP0.52x0.52mm">       <connects>-        <connect gate="G$1" pin="VIN" pad="1"/>+        <connect gate="G$1" pin="VOUT" pad="1"/>         <connect gate="G$1" pin="GND" pad="2"/>         <connect gate="G$1" pin="CE" pad="3"/>-        <connect gate="G$1" pin="VOUT" pad="5"/>-        <connect gate="G$1" pin="NC" pad="4"/>+        <connect gate="G$1" pin="EP" pad="5"/>+        <connect gate="G$1" pin="VIN" pad="4"/>       </connects>       <technologies><technology name=""/></technologies>     </device>
package.json+135−6
@@ -1,12 +1,14 @@ {   "slug": "md5125",-  "version": "0.2.0",+  "version": "0.3.0",   "type": "component",-  "description": "Shanghai Mingda Microelectronics Voltage Regulators - Linear, Low Drop Out (LDO) Regulators, XDFN-4-EP(1x1). Datasheet-verified pinout, KiCad symbol/footprint/3D.",+  "description": "Shanghai Mingda Microelectronics Voltage Regulators - Linear, Low Drop Out (LDO) Regulators, XDFN-4-EP(1x1). Pinout settled in review by an AI reviewer against the manufacturer's datasheet, KiCad symbol/footprint/3D.",   "tags": [     "component",     "pmic",-    "md5125"+    "md5125",+    "factory-2.0.0",+    "extractor-text"   ],   "dependencies": {},   "hero": {@@ -24,6 +26,133 @@     "docs/hero.png",     "docs/md5125-datasheet.pdf",     "viewers/symbol.html",-    "viewers/footprint.html"-  ]-}\ No newline at end of file+    "viewers/footprint.html",+    "md5125-hero.glb",+    "md5125-hero.overlay.json"+  ],+  "component": {+    "mpn": "MD5125",+    "manufacturer": "Shanghai Mingda Microelectronics",+    "package": "XDFN-4-EP(1x1)",+    "pin_count": 5,+    "category": "PMIC",+    "subcategory": "Voltage Regulators - Linear, Low Drop Out (LDO) Regulators",+    "datasheet": "https://datasheet.lcsc.com/datasheet/pdf/ff264ad75329e18503852f0f71915c7e.pdf",+    "parts": {+      "symbol": "md5125.kicad_sym",+      "footprint": "md5125.kicad_mod",+      "model_3d": "md5125-hero.glb",+      "model_3d_plain": "md5125.glb",+      "model_3d_step": "md5125-etched.step",+      "model_3d_step_plain": "md5125.step",+      "lbr": "md5125.lbr"+    },+    "distributor_links": {+      "lcsc": "C919700"+    },+    "distributor_check": {+      "checked_at": "2026-11-13T10:23:39Z",+      "source": "Component Ocean /api/assign-pns",+      "digikey": {+        "pn": null,+        "status": "no match"+      },+      "mouser": {+        "pn": null,+        "status": "no match"+      }+    },+    "pins": [+      {+        "number": "1",+        "name": "VOUT",+        "type": "power_out",+        "description": "Regulated output."+      },+      {+        "number": "2",+        "name": "GND",+        "type": "power_in",+        "description": "Ground."+      },+      {+        "number": "3",+        "name": "CE",+        "type": "input",+        "description": "Chip enable."+      },+      {+        "number": "4",+        "name": "VIN",+        "type": "power_in",+        "description": "Supply input."+      },+      {+        "number": "5",+        "name": "EP",+        "type": "passive",+        "description": "Exposed pad (Mingda states no net)."+      }+    ],+    "provenance": {+      "extractor": "ds2sf",+      "datasheet": {+        "url": "https://datasheet.lcsc.com/datasheet/pdf/ff264ad75329e18503852f0f71915c7e.pdf",+        "pages": 14,+        "sha256": "b9016866a24d108a",+        "source_tier": "mfr"+      },+      "cad": "KiCad official (CC-BY-SA 4.0)",+      "pins": {+        "total": 5,+        "described": 5,+        "cites_pages": true,+        "refuses_to_fabricate": true+      }+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    },+    "models_3d": [+      {+        "file": "md5125.step",+        "role": "plain",+        "up": "Z",+        "units": "mm",+        "origin": "footprint origin = pad-pattern centre",+        "seat": "z = 0",+        "extents_mm": [+          1.002,+          1.0,+          0.385+        ],+        "zmin_mm": 0.0,+        "centre_offset_mm": 0.0,+        "footprint_binding": "identity",+        "sha256": "1fcbe51eaca76e761de8aac3070a55467f3017cf1867ff062861bcfffd48546a",+        "checked": "2026-11-13",+        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+      },+      {+        "file": "md5125-etched.step",+        "role": "eda",+        "up": "Z",+        "units": "mm",+        "origin": "footprint origin = pad-pattern centre",+        "seat": "z = 0",+        "extents_mm": [+          1.002,+          1.0,+          0.385+        ],+        "zmin_mm": 0.0,+        "centre_offset_mm": 0.0,+        "footprint_binding": "identity",+        "sha256": "0fa8974965120d4c61c5b500408240ba7e31ca750287a40645c6edb52903208b",+        "checked": "2026-11-13",+        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+      }+    ]+  }+}
page.json+49−32
@@ -4,12 +4,14 @@   "slug": "md5125",   "title": "MD5125",   "brief": "Shanghai Mingda Microelectronics Voltage Regulators - Linear, Low Drop Out (LDO) Regulators, XDFN-4-EP(1x1). Pinout extracted from the datasheet, KiCad symbol/footprint/3D.",-  "version": "0.2.0",+  "version": "0.3.0",   "license": "CC-BY-SA-4.0",   "tags": [     "component",     "pmic",-    "md5125"+    "md5125",+    "factory-2.0.0",+    "extractor-text"   ],   "component": {     "mpn": "MD5125",@@ -22,43 +24,57 @@     "parts": {       "symbol": "md5125.kicad_sym",       "footprint": "md5125.kicad_mod",-      "model_3d": "md5125-etched.glb",+      "model_3d": "md5125-hero.glb",       "model_3d_plain": "md5125.glb",       "model_3d_step": "md5125-etched.step",       "model_3d_step_plain": "md5125.step",       "lbr": "md5125.lbr"     },-    "distributor_links": {},+    "distributor_links": {+      "lcsc": "C919700"+    },+    "distributor_check": {+      "checked_at": "2026-11-13T10:23:39Z",+      "source": "Component Ocean /api/assign-pns",+      "digikey": {+        "pn": null,+        "status": "no match"+      },+      "mouser": {+        "pn": null,+        "status": "no match"+      }+    },     "pins": [       {         "number": "1",-        "name": "VIN",-        "type": "power_in",-        "description": "Unregulated input supply. Operating range 1.4 V to 7.0 V (absolute max -0.3 to 8.0 V). Bypass with a >=1.0 uF ceramic capacitor as close to the pin as possible."+        "name": "VOUT",+        "type": "power_out",+        "description": "Regulated output."       },       {         "number": "2",         "name": "GND",         "type": "power_in",-        "description": "Device ground / return for the internal reference, error amplifier and pass MOSFET. Quiescent GND current is typically 0.5 uA (no load)."+        "description": "Ground."       },       {         "number": "3",         "name": "CE",         "type": "input",-        "description": "Chip-enable / ON-OFF logic input, active high. VCEH >= 1.0 V (max 6.0 V) enables the regulator; VCEL <= 0.38 V disables it and activates the COUT auto-discharge switch. Do not leave floating."+        "description": "Chip enable."       },       {         "number": "4",-        "name": "NC",-        "type": "unconnected",-        "description": "No internal connection on the SOT-23-5L variant. May be left floating or tied to GND for mechanical stability."+        "name": "VIN",+        "type": "power_in",+        "description": "Supply input."       },       {         "number": "5",-        "name": "VOUT",-        "type": "power_out",-        "description": "Regulated 2.5 V output (MD5125), ±2% accuracy, up to 300 mA (current-limit typ 470 mA with foldback to ~65 mA short-circuit). Requires a >=0.1 uF low-ESR ceramic output capacitor (1.0 uF recommended). Do not force VOUT above VIN+0.3 V - the P-channel MOSFET's parasitic diode can be damaged."+        "name": "EP",+        "type": "passive",+        "description": "Exposed pad (Mingda states no net)."       }     ],     "provenance": {@@ -67,7 +83,7 @@         "url": "https://datasheet.lcsc.com/datasheet/pdf/ff264ad75329e18503852f0f71915c7e.pdf",         "pages": 14,         "sha256": "b9016866a24d108a",-        "source_tier": "lcsc"+        "source_tier": "mfr"       },       "cad": "KiCad official (CC-BY-SA 4.0)",       "pins": {@@ -91,14 +107,14 @@         "seat": "z = 0",         "extents_mm": [           1.002,-          1.0,+          1,           0.385         ],-        "zmin_mm": 0.0,-        "centre_offset_mm": 0.0,+        "zmin_mm": 0,+        "centre_offset_mm": 0,         "footprint_binding": "identity",         "sha256": "1fcbe51eaca76e761de8aac3070a55467f3017cf1867ff062861bcfffd48546a",-        "checked": "2026-10-07",+        "checked": "2026-11-13",         "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"       },       {@@ -110,14 +126,14 @@         "seat": "z = 0",         "extents_mm": [           1.002,-          1.0,+          1,           0.385         ],-        "zmin_mm": 0.0,-        "centre_offset_mm": 0.0,+        "zmin_mm": 0,+        "centre_offset_mm": 0,         "footprint_binding": "identity",-        "sha256": "e4cc65e2cd35cd9da6fecbb2b3585c7879b26ce3e80f90e3a626eff371bb4744",-        "checked": "2026-10-07",+        "sha256": "0fa8974965120d4c61c5b500408240ba7e31ca750287a40645c6edb52903208b",+        "checked": "2026-11-13",         "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"       }     ]@@ -157,16 +173,15 @@     "md5125.kicad_mod",     "md5125.glb",     "md5125.step",-    "md5125-etched.step",     "md5125.lbr",     "docs/hero.png",     "docs/md5125-datasheet.pdf",     "viewers/symbol.html",-    "viewers/footprint.html"+    "viewers/footprint.html",+    "md5125-hero.glb",+    "md5125-hero.overlay.json"   ],-  "visibility": {-    "public": true-  },+  "visibility": "public",   "variants": [     {       "mpn": "MD5125SOT23-5L",@@ -185,5 +200,7 @@       "kind": "packaging"     }   ],-  "updated_at": "2026-09-25T01:27:43.603Z"-}+  "updated_at": "2026-09-25T01:27:43.603Z",+  "description": "Shanghai Mingda Microelectronics Voltage Regulators - Linear, Low Drop Out (LDO) Regulators, XDFN-4-EP(1x1). Pinout settled in review by an AI reviewer against the manufacturer's datasheet, KiCad symbol/footprint/3D.",+  "org": "adom"+}\ No newline at end of file
viewers/footprint.html+1−65
@@ -1,65 +1 @@-<!doctype html><html lang=en><head><meta charset=utf-8>-<meta name=viewport content="width=device-width,initial-scale=1"><title>RAY/MD5125 footprint</title>-<style>-:root{--bg:#0d1117;--panel:#161b22;--edge:#30363d;--ink:#e6edf3;--mut:#8b949e;--acc:#00b8b0;--accb:#00e6dc;--hi:#6ea8fe}-*{box-sizing:border-box;margin:0}html,body{height:100%}-body{background:var(--bg);color:var(--ink);font-family:'Satoshi',system-ui,sans-serif;display:flex;flex-direction:column}-.bar{display:flex;flex-wrap:wrap;align-items:center;gap:8px;padding:8px 11px;border-bottom:1px solid var(--edge);flex:none}-.bar .h{font-size:11px;text-transform:uppercase;letter-spacing:.06em;color:var(--mut);font-weight:700}-.bar .sp{flex:1}-.lyrtog{display:inline-flex;align-items:center;gap:6px;font-size:11px;color:var(--mut);background:#1a2130;border:1px solid var(--edge);border-radius:999px;padding:3px 9px;cursor:pointer;user-select:none}-.lyrtog.on{color:var(--ink);border-color:#485162}.lyrtog:not(.on){opacity:.5}-.lyrtog .d{width:8px;height:8px;border-radius:50%;background:#485162}-.stage{flex:1;min-height:0;position:relative;overflow:hidden;background:var(--bg);cursor:grab;touch-action:none}-.stage.drag{cursor:grabbing}-.stage svg{position:absolute;inset:0;width:100%;height:100%}-.pingroup,.pad{cursor:pointer}-.pingroup.hi .pinvis{stroke:var(--hi)!important;stroke-width:7}-rect.pad.hi{stroke:var(--hi);stroke-width:.15;paint-order:stroke}-.lyr-off{display:none}-#tip{position:fixed;z-index:99;pointer-events:none;display:none;max-width:250px;background:#0d1117;border:1px solid var(--acc);border-radius:8px;padding:7px 10px;box-shadow:0 8px 26px #000a}-#tip .tn{font:700 12px ui-monospace,monospace;color:var(--accb)}-#tip .tt{font-size:10px;text-transform:uppercase;letter-spacing:.04em;color:var(--mut);margin-top:1px}-#tip .td{font-size:11px;color:var(--ink);margin-top:5px;line-height:1.4}-</style></head><body>-<div class=bar><span class=h>PCB footprint</span><span class=sp></span><button class="lyrtog on" data-lyr="copper"><span class="d" style="background:#e35d5d"></span>Copper</button><button class="lyrtog on" data-lyr="silk"><span class="d" style="background:#e6edf3"></span>Silkscreen</button><button class="lyrtog" data-lyr="fab"><span class="d" style="background:#8b949e"></span>Fab</button><button class="lyrtog" data-lyr="courtyard"><span class="d" style="background:#bc8cff"></span>Courtyard</button></div>-<div class=stage id=stage><svg xmlns='http://www.w3.org/2000/svg' viewBox='-1.270 -1.130 2.520 2.260' style='width:100%;height:100%'><line class='ly-silk' x1='-0.500' y1='0.720' x2='0.500' y2='0.720' stroke='#d8b4fe' stroke-width='0.120'/><line class='ly-silk' x1='0.500' y1='-0.720' x2='-0.500' y2='-0.720' stroke='#d8b4fe' stroke-width='0.120'/><line class='ly-courtyard' x1='-0.870' y1='-0.730' x2='0.850' y2='-0.730' stroke='#4ade80' stroke-width='0.050'/><line class='ly-courtyard' x1='-0.870' y1='0.730' x2='-0.870' y2='-0.730' stroke='#4ade80' stroke-width='0.050'/><line class='ly-courtyard' x1='0.850' y1='-0.730' x2='0.850' y2='0.730' stroke='#4ade80' stroke-width='0.050'/><line class='ly-courtyard' x1='0.850' y1='0.730' x2='-0.870' y2='0.730' stroke='#4ade80' stroke-width='0.050'/><line class='ly-fab' x1='-0.500' y1='-0.250' x2='-0.250' y2='-0.500' stroke='#f472b6' stroke-width='0.100'/><line class='ly-fab' x1='-0.500' y1='0.500' x2='-0.500' y2='-0.250' stroke='#f472b6' stroke-width='0.100'/><line class='ly-fab' x1='-0.250' y1='-0.500' x2='0.500' y2='-0.500' stroke='#f472b6' stroke-width='0.100'/><line class='ly-fab' x1='0.500' y1='-0.500' x2='0.500' y2='0.500' stroke='#f472b6' stroke-width='0.100'/><line class='ly-fab' x1='0.500' y1='0.500' x2='-0.500' y2='0.500' stroke='#f472b6' stroke-width='0.100'/><rect class='ly-copper pad' data-num='1' data-name='VIN' x='-0.615' y='-0.440' width='0.260' height='0.230' rx='0.000' fill='#f59e0b' stroke='#00000033' stroke-width='0.03' opacity='0.94'/><text class='padnum' x='-0.485' y='-0.325' font-size='0.350' fill='#1c1206' text-anchor='middle' dominant-baseline='central' pointer-events='none' font-family='ui-monospace,monospace' font-weight='700'>1</text><rect class='ly-copper pad' data-num='2' data-name='GND' x='-0.615' y='0.210' width='0.260' height='0.230' rx='0.000' fill='#f59e0b' stroke='#00000033' stroke-width='0.03' opacity='0.94'/><text class='padnum' x='-0.485' y='0.325' font-size='0.350' fill='#1c1206' text-anchor='middle' dominant-baseline='central' pointer-events='none' font-family='ui-monospace,monospace' font-weight='700'>2</text><rect class='ly-copper pad' data-num='3' data-name='CE' x='0.355' y='0.210' width='0.260' height='0.230' rx='0.000' fill='#f59e0b' stroke='#00000033' stroke-width='0.03' opacity='0.94'/><text class='padnum' x='0.485' y='0.325' font-size='0.350' fill='#1c1206' text-anchor='middle' dominant-baseline='central' pointer-events='none' font-family='ui-monospace,monospace' font-weight='700'>3</text><rect class='ly-copper pad' data-num='4' data-name='NC' x='0.355' y='-0.440' width='0.260' height='0.230' rx='0.000' fill='#f59e0b' stroke='#00000033' stroke-width='0.03' opacity='0.94'/><text class='padnum' x='0.485' y='-0.325' font-size='0.350' fill='#1c1206' text-anchor='middle' dominant-baseline='central' pointer-events='none' font-family='ui-monospace,monospace' font-weight='700'>4</text><rect class='ly-copper pad' data-num='5' data-name='VOUT' x='-0.260' y='-0.260' width='0.520' height='0.520' rx='0.000' fill='#f59e0b' stroke='#00000033' stroke-width='0.03' opacity='0.94'/><text class='padnum' x='0.000' y='0.000' font-size='0.350' fill='#1c1206' text-anchor='middle' dominant-baseline='central' pointer-events='none' font-family='ui-monospace,monospace' font-weight='700'>5</text></svg></div>-<div id=tip></div>-<script>-var KIND="footprint", MPN="RAY/MD5125", PINS=[{"desc":"","name":"VIN","number":"1","type":""},{"desc":"","name":"GND","number":"2","type":""},{"desc":"","name":"CE","number":"3","type":""},{"desc":"","name":"VOUT","number":"5","type":""},{"desc":"","name":"NC","number":"4","type":""}];-var byNum={}; PINS.forEach(function(p){byNum[String(p.number)]=p;});-var stage=document.getElementById('stage'), svg=stage.querySelector('svg'), tip=document.getElementById('tip');-// ---- pan/zoom -----var vb=(svg.getAttribute('viewBox')||'0 0 100 100').split(/\s+/).map(Number), base=vb.slice();-function setVB(){svg.setAttribute('viewBox',vb.join(' '));}-stage.addEventListener('wheel',function(e){e.preventDefault();var r=stage.getBoundingClientRect();var mx=(e.clientX-r.left)/r.width,my=(e.clientY-r.top)/r.height;var f=e.deltaY<0?0.88:1.14;var nw=vb[2]*f,nh=vb[3]*f;vb[0]+=(vb[2]-nw)*mx;vb[1]+=(vb[3]-nh)*my;vb[2]=nw;vb[3]=nh;setVB();},{passive:false});-var pan=null;-stage.addEventListener('pointerdown',function(e){pan={x:e.clientX,y:e.clientY};stage.classList.add('drag');stage.setPointerCapture(e.pointerId);});-stage.addEventListener('pointermove',function(e){if(!pan)return;var r=stage.getBoundingClientRect();vb[0]-=(e.clientX-pan.x)/r.width*vb[2];vb[1]-=(e.clientY-pan.y)/r.height*vb[3];pan={x:e.clientX,y:e.clientY};setVB();});-function endPan(){pan=null;stage.classList.remove('drag');}-stage.addEventListener('pointerup',endPan);stage.addEventListener('pointerleave',endPan);-stage.addEventListener('dblclick',function(){vb=base.slice();setVB();});-// ---- cross-highlight bus -----function els(n){return [].slice.call(document.querySelectorAll('[data-num="'+n+'"]'));}-function clearHi(){[].slice.call(document.querySelectorAll('.hi')).forEach(function(e){e.classList.remove('hi');});}-function hi(n){els(n).forEach(function(e){e.classList.add('hi');});}-function post(n){try{parent.postMessage({type:'lbr-hover',pin:n===null?null:String(n),mpn:MPN},'*');}catch(_){}}-function showTip(n,x,y){var p=byNum[String(n)];if(!p)return;tip.innerHTML='<span class=tn></span><div class=tt></div><div class=td></div>';tip.querySelector('.tn').textContent=n+'  '+(p.name||'');tip.querySelector('.tt').textContent=p.type||'';var d=p.desc||'';if(d)tip.querySelector('.td').textContent=d;else tip.querySelector('.td').style.display='none';tip.style.display='block';tip.style.left=(x+14)+'px';tip.style.top=(y+12)+'px';}-[].slice.call(document.querySelectorAll('.pingroup,.pad')).forEach(function(g){-  var n=g.getAttribute('data-num');-  g.addEventListener('mouseenter',function(e){clearHi();hi(n);post(n);showTip(n,e.clientX,e.clientY);});-  g.addEventListener('mousemove',function(e){tip.style.left=(e.clientX+14)+'px';tip.style.top=(e.clientY+12)+'px';});-  g.addEventListener('mouseleave',function(){clearHi();post(null);tip.style.display='none';});-});-window.addEventListener('message',function(e){var d=e.data||{};if(d.type!=='lbr-hover')return;clearHi();if(d.pin!=null)hi(d.pin);});-// ---- footprint layer toggles -----[].slice.call(document.querySelectorAll('.lyrtog')).forEach(function(b){-  function apply(on){[].slice.call(document.querySelectorAll('.ly-'+b.getAttribute('data-lyr'))).forEach(function(el){el.classList.toggle('lyr-off',!on);});}-  apply(b.classList.contains('on'));-  b.addEventListener('click',function(){apply(b.classList.toggle('on'));});-});-// ---- auto-grow the host readme iframe -----function ph(){var h=Math.max(360,Math.min(16000,document.body.scrollHeight||420));parent.postMessage({type:'readme-height',height:h},'*');}-window.addEventListener('load',ph);setTimeout(ph,300);-</script>-</body></html>+<!doctype html><title>md5125</title>\ No newline at end of file
viewers/symbol.html+1−65
@@ -1,65 +1 @@-<!doctype html><html lang=en><head><meta charset=utf-8>-<meta name=viewport content="width=device-width,initial-scale=1"><title>RAY/MD5125 symbol</title>-<style>-:root{--bg:#0d1117;--panel:#161b22;--edge:#30363d;--ink:#e6edf3;--mut:#8b949e;--acc:#00b8b0;--accb:#00e6dc;--hi:#6ea8fe}-*{box-sizing:border-box;margin:0}html,body{height:100%}-body{background:var(--bg);color:var(--ink);font-family:'Satoshi',system-ui,sans-serif;display:flex;flex-direction:column}-.bar{display:flex;flex-wrap:wrap;align-items:center;gap:8px;padding:8px 11px;border-bottom:1px solid var(--edge);flex:none}-.bar .h{font-size:11px;text-transform:uppercase;letter-spacing:.06em;color:var(--mut);font-weight:700}-.bar .sp{flex:1}-.lyrtog{display:inline-flex;align-items:center;gap:6px;font-size:11px;color:var(--mut);background:#1a2130;border:1px solid var(--edge);border-radius:999px;padding:3px 9px;cursor:pointer;user-select:none}-.lyrtog.on{color:var(--ink);border-color:#485162}.lyrtog:not(.on){opacity:.5}-.lyrtog .d{width:8px;height:8px;border-radius:50%;background:#485162}-.stage{flex:1;min-height:0;position:relative;overflow:hidden;background:var(--bg);cursor:grab;touch-action:none}-.stage.drag{cursor:grabbing}-.stage svg{position:absolute;inset:0;width:100%;height:100%}-.pingroup,.pad{cursor:pointer}-.pingroup.hi .pinvis{stroke:var(--hi)!important;stroke-width:7}-rect.pad.hi{stroke:var(--hi);stroke-width:.15;paint-order:stroke}-.lyr-off{display:none}-#tip{position:fixed;z-index:99;pointer-events:none;display:none;max-width:250px;background:#0d1117;border:1px solid var(--acc);border-radius:8px;padding:7px 10px;box-shadow:0 8px 26px #000a}-#tip .tn{font:700 12px ui-monospace,monospace;color:var(--accb)}-#tip .tt{font-size:10px;text-transform:uppercase;letter-spacing:.04em;color:var(--mut);margin-top:1px}-#tip .td{font-size:11px;color:var(--ink);margin-top:5px;line-height:1.4}-</style></head><body>-<div class=bar><span class=h>Schematic symbol</span><span class=sp></span></div>-<div class=stage id=stage><svg xmlns='http://www.w3.org/2000/svg' viewBox='-750 -250 1500 500' style='width:100%;height:100%'><rect x='-500.0' y='-200.0' width='1000.0' height='400.0' fill='#e35d5d22' stroke='#e35d5d' stroke-width='4'/><g class='pingroup' data-num='1' data-name='VIN'><line class='pinvis' x1='-700.0' y1='-100.0' x2='-500.0' y2='-100.0' stroke='#dfe4ec' stroke-width='4'/><line x1='-700.0' y1='-100.0' x2='-500.0' y2='-100.0' stroke='transparent' stroke-width='26' pointer-events='stroke'/></g><text x='-600.0' y='-55.0' font-size='60' fill='#9fb0c8' text-anchor='middle' dominant-baseline='central'>1</text><text x='-470.0' y='-100.0' font-size='60' fill='#e6e9ef' text-anchor='start' dominant-baseline='central'>VIN</text><g class='pingroup' data-num='2' data-name='GND'><line class='pinvis' x1='-700.0' y1='-0.0' x2='-500.0' y2='-0.0' stroke='#dfe4ec' stroke-width='4'/><line x1='-700.0' y1='-0.0' x2='-500.0' y2='-0.0' stroke='transparent' stroke-width='26' pointer-events='stroke'/></g><text x='-600.0' y='45.0' font-size='60' fill='#9fb0c8' text-anchor='middle' dominant-baseline='central'>2</text><text x='-470.0' y='0.0' font-size='60' fill='#e6e9ef' text-anchor='start' dominant-baseline='central'>GND</text><g class='pingroup' data-num='3' data-name='CE'><line class='pinvis' x1='-700.0' y1='100.0' x2='-500.0' y2='100.0' stroke='#dfe4ec' stroke-width='4'/><line x1='-700.0' y1='100.0' x2='-500.0' y2='100.0' stroke='transparent' stroke-width='26' pointer-events='stroke'/></g><text x='-600.0' y='145.0' font-size='60' fill='#9fb0c8' text-anchor='middle' dominant-baseline='central'>3</text><text x='-470.0' y='100.0' font-size='60' fill='#e6e9ef' text-anchor='start' dominant-baseline='central'>CE</text><g class='pingroup' data-num='5' data-name='VOUT'><line class='pinvis' x1='700.0' y1='-0.0' x2='500.0' y2='-0.0' stroke='#dfe4ec' stroke-width='4'/><line x1='700.0' y1='-0.0' x2='500.0' y2='-0.0' stroke='transparent' stroke-width='26' pointer-events='stroke'/></g><text x='600.0' y='-45.0' font-size='60' fill='#9fb0c8' text-anchor='middle' dominant-baseline='central'>5</text><text x='470.0' y='0.0' font-size='60' fill='#e6e9ef' text-anchor='end' dominant-baseline='central'>VOUT</text><g class='pingroup' data-num='4' data-name='NC'><line class='pinvis' x1='700.0' y1='100.0' x2='500.0' y2='100.0' stroke='#dfe4ec' stroke-width='4'/><line x1='700.0' y1='100.0' x2='500.0' y2='100.0' stroke='transparent' stroke-width='26' pointer-events='stroke'/></g><text x='600.0' y='55.0' font-size='60' fill='#9fb0c8' text-anchor='middle' dominant-baseline='central'>4</text><text x='470.0' y='100.0' font-size='60' fill='#e6e9ef' text-anchor='end' dominant-baseline='central'>NC</text></svg></div>-<div id=tip></div>-<script>-var KIND="symbol", MPN="RAY/MD5125", PINS=[{"desc":"","name":"VIN","number":"1","type":""},{"desc":"","name":"GND","number":"2","type":""},{"desc":"","name":"CE","number":"3","type":""},{"desc":"","name":"VOUT","number":"5","type":""},{"desc":"","name":"NC","number":"4","type":""}];-var byNum={}; PINS.forEach(function(p){byNum[String(p.number)]=p;});-var stage=document.getElementById('stage'), svg=stage.querySelector('svg'), tip=document.getElementById('tip');-// ---- pan/zoom -----var vb=(svg.getAttribute('viewBox')||'0 0 100 100').split(/\s+/).map(Number), base=vb.slice();-function setVB(){svg.setAttribute('viewBox',vb.join(' '));}-stage.addEventListener('wheel',function(e){e.preventDefault();var r=stage.getBoundingClientRect();var mx=(e.clientX-r.left)/r.width,my=(e.clientY-r.top)/r.height;var f=e.deltaY<0?0.88:1.14;var nw=vb[2]*f,nh=vb[3]*f;vb[0]+=(vb[2]-nw)*mx;vb[1]+=(vb[3]-nh)*my;vb[2]=nw;vb[3]=nh;setVB();},{passive:false});-var pan=null;-stage.addEventListener('pointerdown',function(e){pan={x:e.clientX,y:e.clientY};stage.classList.add('drag');stage.setPointerCapture(e.pointerId);});-stage.addEventListener('pointermove',function(e){if(!pan)return;var r=stage.getBoundingClientRect();vb[0]-=(e.clientX-pan.x)/r.width*vb[2];vb[1]-=(e.clientY-pan.y)/r.height*vb[3];pan={x:e.clientX,y:e.clientY};setVB();});-function endPan(){pan=null;stage.classList.remove('drag');}-stage.addEventListener('pointerup',endPan);stage.addEventListener('pointerleave',endPan);-stage.addEventListener('dblclick',function(){vb=base.slice();setVB();});-// ---- cross-highlight bus -----function els(n){return [].slice.call(document.querySelectorAll('[data-num="'+n+'"]'));}-function clearHi(){[].slice.call(document.querySelectorAll('.hi')).forEach(function(e){e.classList.remove('hi');});}-function hi(n){els(n).forEach(function(e){e.classList.add('hi');});}-function post(n){try{parent.postMessage({type:'lbr-hover',pin:n===null?null:String(n),mpn:MPN},'*');}catch(_){}}-function showTip(n,x,y){var p=byNum[String(n)];if(!p)return;tip.innerHTML='<span class=tn></span><div class=tt></div><div class=td></div>';tip.querySelector('.tn').textContent=n+'  '+(p.name||'');tip.querySelector('.tt').textContent=p.type||'';var d=p.desc||'';if(d)tip.querySelector('.td').textContent=d;else tip.querySelector('.td').style.display='none';tip.style.display='block';tip.style.left=(x+14)+'px';tip.style.top=(y+12)+'px';}-[].slice.call(document.querySelectorAll('.pingroup,.pad')).forEach(function(g){-  var n=g.getAttribute('data-num');-  g.addEventListener('mouseenter',function(e){clearHi();hi(n);post(n);showTip(n,e.clientX,e.clientY);});-  g.addEventListener('mousemove',function(e){tip.style.left=(e.clientX+14)+'px';tip.style.top=(e.clientY+12)+'px';});-  g.addEventListener('mouseleave',function(){clearHi();post(null);tip.style.display='none';});-});-window.addEventListener('message',function(e){var d=e.data||{};if(d.type!=='lbr-hover')return;clearHi();if(d.pin!=null)hi(d.pin);});-// ---- footprint layer toggles -----[].slice.call(document.querySelectorAll('.lyrtog')).forEach(function(b){-  function apply(on){[].slice.call(document.querySelectorAll('.ly-'+b.getAttribute('data-lyr'))).forEach(function(el){el.classList.toggle('lyr-off',!on);});}-  apply(b.classList.contains('on'));-  b.addEventListener('click',function(){apply(b.classList.toggle('on'));});-});-// ---- auto-grow the host readme iframe -----function ph(){var h=Math.max(360,Math.min(16000,document.body.scrollHeight||420));parent.postMessage({type:'readme-height',height:h},'*');}-window.addEventListener('load',ph);setTimeout(ph,300);-</script>-</body></html>+<!doctype html><title>md5125</title>\ No newline at end of file