component
MCP7940NT-I
Public Made by Adomby adom
Microchip Real-time Clocks (RTC), SOIC-8. Pinout extracted from the datasheet, KiCad symbol/footprint/3D.
← Commit history
page.json+6−3@@ -56,7 +56,7 @@ "number": "5", "name": "SDA", "type": "bidirectional",- "description": "Bidirectional I2C serial data (open-drain). Requires an external pull-up resistor to VCC (typ. 10 k\u03a9 at 100 kHz or 2 k\u03a9 at 400 kHz). Data may change only while SCL is low; changes while SCL is high signal Start/Stop conditions."+ "description": "Bidirectional I2C serial data (open-drain). Requires an external pull-up resistor to VCC (typ. 10 kΩ at 100 kHz or 2 kΩ at 400 kHz). Data may change only while SCL is low; changes while SCL is high signal Start/Stop conditions." }, { "number": "6",@@ -68,7 +68,7 @@ "number": "7", "name": "MFP", "type": "output",- "description": "Multifunction output (open-drain). Configurable as alarm output on an alarm match, as a selectable-frequency square-wave output, or as a general-purpose output driven by the OUT bit in the CONTROL register. Requires an external pull-up resistor to VCC (typ. 10 k\u03a9); leave floating if unused. VOL = 0.40 V at IOL = 3.0 mA (VCC = 4.5 V)."+ "description": "Multifunction output (open-drain). Configurable as alarm output on an alarm match, as a selectable-frequency square-wave output, or as a general-purpose output driven by the OUT bit in the CONTROL register. Requires an external pull-up resistor to VCC (typ. 10 kΩ); leave floating if unused. VOL = 0.40 V at IOL = 3.0 mA (VCC = 4.5 V)." }, { "number": "8",@@ -144,5 +144,8 @@ "docs/mcp7940nt-i-datasheet.pdf", "viewers/symbol.html", "viewers/footprint.html"- ]+ ],+ "visibility": {+ "public": true+ } }