← Commit history
mcp6541t-i-lt: renamed from mcp6541t-i, the part it was built from (MCP6541T-I/LT); family listed
4 files changed
+42−10
README.md+7−1@@ -1,4 +1,4 @@-# MCP6541T-I+# MCP6541T-I/LT **Microchip Tech** · Comparators · SC-70-5 @@ -75,3 +75,9 @@ Data extracted from the manufacturer datasheet, not a distributor listing: - **CAD:** symbol generated from the datasheet pin table; footprint an Adom_Gen land derived from the manufacturer drawing; 3D model generated to fit that land. Land: Microchip's printed land, drawing C04-2061-LT Rev E (DS20001696L p.26). [Datasheet PDF](docs/mcp6541t-i-datasheet.pdf)++## Other parts in this family++This page is **MCP6541T-I/LT**. These part numbers share its family name but are different parts (another package, rating or grade), each with its own page:++- MCP6541T-I/OT
mcp6541t-i.lbr+14−3@@ -50,7 +50,7 @@ <layer number="98" name="Guide" color="6" fill="1" visible="yes" active="yes"/> </layers> <library>-<description></description>+<description>Microchip Tech Comparators, SC-70-5. Pinout settled in review by an AI reviewer against the manufacturer's datasheet</description> <packages> <package name="Microchip_MCP6541_1c2e8d"> <description>5 pads, 3.2 x 1.8 mm. Generated from the Microchip datasheet land pattern (family D1c2e8d, spec 1c2e8d6eec)</description>@@ -70,6 +70,7 @@ </packages> <symbols> <symbol name="MCP6541T-I">+ <description>Microchip Tech Comparators, SC-70-5. Pinout settled in review by an AI reviewer against the manufacturer's datasheet</description> <wire x1="-12.7" y1="5.08" x2="12.7" y2="5.08" width="0.254" layer="94"/> <wire x1="12.7" y1="5.08" x2="12.7" y2="-5.08" width="0.254" layer="94"/> <wire x1="12.7" y1="-5.08" x2="-12.7" y2="-5.08" width="0.254" layer="94"/>@@ -85,7 +86,7 @@ </symbols> <devicesets> <deviceset name="MCP6541T-I" prefix="U">- <description></description>+ <description>Microchip Tech Comparators, SC-70-5. Pinout settled in review by an AI reviewer against the manufacturer's datasheet</description> <gates> <gate name="G$1" symbol="MCP6541T-I" x="0" y="0"/> </gates>@@ -98,7 +99,17 @@ <connect gate="G$1" pin="VDD" pad="5"/> <connect gate="G$1" pin="VIN-" pad="4"/> </connects>- <technologies><technology name=""/></technologies>+ <technologies>+ <technology name="">+ <attribute name="MPN" value="MCP6541T-I/LT" constant="no"/>+ <attribute name="MANUFACTURER" value="Microchip Tech" constant="no"/>+ <attribute name="DATASHEET" value="https://ww1.microchip.com/downloads/aemDocuments/documents/MSLD/ProductDocuments/DataSheets/MCP6541-Output-Sub-Microamp-Comparators-DS20001696.pdf" constant="no"/>+ <attribute name="ADOM_WIKI" value="https://wiki.adom.inc/adom/mcp6541t-i-lt" constant="no"/>+ <attribute name="MOUSER_PN" value="579-MCP6541T-I/LT" constant="no"/>+ <attribute name="DIGIKEY_PN" value="MCP6541T-I/LTTR-ND" constant="no"/>+ <attribute name="LCSC_PN" value="C111643" constant="no"/>+ </technology>+ </technologies> </device> </devices> </deviceset>
package.json+10−2@@ -1,5 +1,5 @@ {- "slug": "mcp6541t-i",+ "slug": "mcp6541t-i-lt", "version": "0.1.1", "type": "component", "description": "Microchip Tech Comparators, SC-70-5. Pinout settled in review by an AI reviewer against the manufacturer's datasheet, KiCad symbol/footprint/3D.",@@ -158,6 +158,14 @@ "checked": "2026-11-12", "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)" }- ]+ ],+ "family": {+ "base": "MCP6541T-I",+ "siblings": [+ "MCP6541T-I/OT"+ ],+ "old_slug": "mcp6541t-i",+ "note": "renamed from the cut-base slug to the part it was built from (slug collision split, 2026-11-11)"+ } } }
page.json+11−4@@ -141,7 +141,15 @@ "checked": "2026-11-12", "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)" }- ]+ ],+ "family": {+ "base": "MCP6541T-I",+ "siblings": [+ "MCP6541T-I/OT"+ ],+ "old_slug": "mcp6541t-i",+ "note": "renamed from the cut-base slug to the part it was built from (slug collision split, 2026-11-11)"+ } }, "metadata": { "specs": {@@ -433,8 +441,7 @@ ], "discovery_pitch": "MCP6541T-I (Microchip Tech) component page: datasheet pinout, KiCad symbol, footprint and 3D.", "author": {- "name": "Ray",- "email": "[email protected]"+ "name": "Ray" }, "dependencies": {}, "hero": {@@ -459,4 +466,4 @@ "visibility": { "public": true }-}+}