← Commit history

Publish 0.1.1

Ray ·9fdf84234d · ·parent 759c893
4 files changed +346−11
mcp6231ut-e-lt-hero.glbadded
⋯ 1 unchanged line ⋯
mcp6231ut-e-lt-hero.overlay.jsonadded+194
@@ -0,0 +1,194 @@+{+  "spec": "adom-hero 1.4",+  "mpn": "MCP6231UT-E/LT",+  "kind": "component + footprint reference art",+  "board_use": false,+  "plane_z_mm": -0.02,+  "units": "metre",+  "upAxis": "Z",+  "layers": {+    "pad_outlines": {+      "material": "Footprint pads - teal dashed outlines - 50 percent opacity",+      "rgba": [+        0.0,+        0.902,+        0.863,+        0.5+      ],+      "pads": 5,+      "span_mm": 2.7,+      "dash_mm": 0.12,+      "gap_mm": 0.072,+      "pad_stroke_mm": 0.03+    },+    "silkscreen": {+      "material": "Silkscreen reference lines - 30 percent opacity",+      "rgba": [+        0.92,+        0.96,+        1.0,+        0.3+      ],+      "footprint_items": 8,+      "pin1": {+        "source": "footprint silkscreen",+        "pad": "1"+      }+    },+    "signal_names": {+      "material": "Signal names - 50 percent opacity",+      "rgba": [+        0.92,+        0.96,+        1.0,+        0.5+      ],+      "font": "DejaVu Sans Mono",+      "labels": 5,+      "sides": "top + mirrored underside (single-sided)",+      "fallback_to_pad_number": 0+    }+  },+  "align": {+    "ok": true,+    "centre_offset_mm": 0.0,+    "tolerance_mm": 0.25,+    "orientation_flipped": false,+    "contacts_bbox_mm": [+      -1.05,+      1.05,+      -0.762,+      0.762+    ],+    "pads_bbox_mm": [+      -1.35,+      1.35,+      -0.825,+      0.825+    ],+    "seating_z_mm": -0.0+  },+  "sources": {+    "glb": "mcp6231ut-e.glb",+    "glb_sha256": "40381a73788e7e766171144a6a23f4809d03ad267c4331c6ed6d5dee73660ad0",+    "footprint": "mcp6231ut-e.kicad_mod",+    "footprint_sha256": "869e17094994ff787b769a2d69512455a2f20950d59dd5c4103026ec413bb88e",+    "pins": "page.json component.pins",+    "pins_sha256": "35048067dd2b2672d6c89d351e8cefd81187a8d6393311a227ee5ee19231e2ed"+  },+  "generator": "adom-wiki 1.8.24 (component_hero)",+  "labels": [+    {+      "pad": "1",+      "text": "VIN+",+      "x": -1.45,+      "y": -0.65,+      "align": "right",+      "vertical": false,+      "h": 0.325+    },+    {+      "pad": "2",+      "text": "VSS",+      "x": -1.45,+      "y": 0.0,+      "align": "right",+      "vertical": false,+      "h": 0.325+    },+    {+      "pad": "3",+      "text": "VIN-",+      "x": -1.45,+      "y": 0.65,+      "align": "right",+      "vertical": false,+      "h": 0.325+    },+    {+      "pad": "4",+      "text": "VOUT",+      "x": 1.5,+      "y": 0.65,+      "align": "left",+      "vertical": false,+      "h": 0.6+    },+    {+      "pad": "5",+      "text": "VDD",+      "x": 1.5,+      "y": -0.65,+      "align": "left",+      "vertical": false,+      "h": 0.6+    }+  ],+  "pads": [+    {+      "number": "1",+      "shape": "roundrect",+      "center_mm": [+        -0.8375,+        -0.65+      ],+      "size_mm": [+        1.025,+        0.35+      ],+      "rot": 0.0+    },+    {+      "number": "2",+      "shape": "roundrect",+      "center_mm": [+        -0.8375,+        0.0+      ],+      "size_mm": [+        1.025,+        0.35+      ],+      "rot": 0.0+    },+    {+      "number": "3",+      "shape": "roundrect",+      "center_mm": [+        -0.8375,+        0.65+      ],+      "size_mm": [+        1.025,+        0.35+      ],+      "rot": 0.0+    },+    {+      "number": "4",+      "shape": "roundrect",+      "center_mm": [+        0.8375,+        0.65+      ],+      "size_mm": [+        1.025,+        0.35+      ],+      "rot": 0.0+    },+    {+      "number": "5",+      "shape": "roundrect",+      "center_mm": [+        0.8375,+        -0.65+      ],+      "size_mm": [+        1.025,+        0.35+      ],+      "rot": 0.0+    }+  ]+}
package.json+141−3
@@ -1,6 +1,6 @@ {   "slug": "mcp6231ut-e-lt",-  "version": "0.1.0",+  "version": "0.1.1",   "type": "component",   "description": "Microchip Operational Amplifier, SC-70-5. Datasheet-verified pinout, KiCad symbol/footprint/3D.",   "tags": [@@ -24,6 +24,144 @@     "docs/hero.png",     "docs/mcp6231ut-e-datasheet.pdf",     "viewers/symbol.html",-    "viewers/footprint.html"-  ]+    "viewers/footprint.html",+    "mcp6231ut-e-etched.step",+    "mcp6231ut-e-etched.glb",+    "mcp6231ut-e-lt-hero.glb",+    "mcp6231ut-e-lt-hero.overlay.json"+  ],+  "component": {+    "mpn": "MCP6231UT-E/LT",+    "manufacturer": "Microchip",+    "package": "SC-70-5",+    "pin_count": 5,+    "category": "Op-amp/Cmp",+    "subcategory": "Operational Amplifier",+    "datasheet": "https://datasheet.lcsc.com/datasheet/pdf/78189daec4794f10ac074a2123dae3a2.pdf",+    "parts": {+      "symbol": "mcp6231ut-e.kicad_sym",+      "footprint": "mcp6231ut-e.kicad_mod",+      "model_3d": "mcp6231ut-e-lt-hero.glb",+      "model_3d_plain": "mcp6231ut-e.glb",+      "model_3d_step": "mcp6231ut-e-etched.step",+      "model_3d_step_plain": "mcp6231ut-e.step",+      "lbr": "mcp6231ut-e.lbr"+    },+    "distributor_links": {},+    "pins": [+      {+        "number": "1",+        "name": "VIN+",+        "type": "input",+        "description": "Non-inverting analog input. High-impedance CMOS input with typical bias current of ±1 pA. Common-mode input range extends from VSS - 0.3 V to VDD + 0.3 V (rail-to-rail)."+      },+      {+        "number": "2",+        "name": "VSS",+        "type": "power_in",+        "description": "Negative power supply / ground reference. Typically tied to system ground in single-supply operation; VDD - VSS must be between 1.8 V and 6.0 V (7.0 V absolute maximum)."+      },+      {+        "number": "3",+        "name": "VIN-",+        "type": "input",+        "description": "Inverting analog input. High-impedance CMOS input with typical bias current of ±1 pA. Differential input impedance ~10^13 Ω || 3 pF."+      },+      {+        "number": "4",+        "name": "VOUT",+        "type": "output",+        "description": "Rail-to-rail analog output. Low-impedance voltage source; swings within 35 mV of either rail with a 10 kΩ load. Short-circuit current ±6 mA at VDD = 1.8 V, ±23 mA at VDD = 5.5 V."+      },+      {+        "number": "5",+        "name": "VDD",+        "type": "power_in",+        "description": "Positive power supply. 1.8 V to 6.0 V referenced to VSS. Requires a local 0.01-0.1 µF bypass capacitor within 2 mm and optionally a 1 µF bulk capacitor within 100 mm."+      }+    ],+    "provenance": {+      "extractor": "ds2sf",+      "datasheet": {+        "url": "https://datasheet.lcsc.com/datasheet/pdf/78189daec4794f10ac074a2123dae3a2.pdf",+        "pages": 40,+        "sha256": "aed907562ec5cabc",+        "source_tier": "mfr"+      },+      "cad": "KiCad official (CC-BY-SA 4.0)",+      "pins": {+        "total": 5,+        "described": 5,+        "cites_pages": true,+        "refuses_to_fabricate": true+      }+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    },+    "models_3d": [+      {+        "file": "mcp6231ut-e.step",+        "role": "plain",+        "up": "Z",+        "units": "mm",+        "origin": "footprint origin = pad-pattern centre",+        "seat": "z = 0",+        "extents_mm": [+          2.1,+          2,+          1.1+        ],+        "zmin_mm": 0,+        "centre_offset_mm": 0,+        "footprint_binding": "identity",+        "sha256": "2860de5b7b085919ff6e952148353f928798588d9f544dc69430545aff2ba908",+        "checked": "2026-10-07",+        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+      },+      {+        "file": "mcp6231ut-e-etched.step",+        "role": "eda",+        "up": "Z",+        "units": "mm",+        "origin": "footprint origin = pad-pattern centre",+        "seat": "z = 0",+        "extents_mm": [+          2.1,+          2,+          1.1+        ],+        "zmin_mm": 0,+        "centre_offset_mm": 0,+        "footprint_binding": "identity",+        "sha256": "5df6ed42af84b3f92174f474cb390c0153b143f42e9bb4ee378139a1d7a8677e",+        "checked": "2026-10-07",+        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+      }+    ],+    "family": {+      "base": "MCP6231UT-E",+      "siblings": [+        "MCP6231UT-E/OT"+      ],+      "old_slug": "mcp6231ut-e",+      "note": "renamed from the cut-base slug to the part it was built from (slug collision split, 2026-11-11)"+    }+  },+  "title": "MCP6231UT-E/LT",+  "brief": "Microchip Operational Amplifier, SC-70-5. Pinout extracted from the datasheet, KiCad symbol/footprint/3D.",+  "metadata": {+    "specs": {+      "Manufacturer": "Microchip",+      "Package": "SC-70-5",+      "Category": "Op-amp/Cmp",+      "Pins": "5"+    }+  },+  "discovery_triggers": [+    "mcp6231ut-e"+  ],+  "discovery_pitch": "MCP6231UT-E (Microchip) component page with datasheet-verified CAD.",+  "visibility": "public" }
page.json+11−8
@@ -4,7 +4,7 @@   "slug": "mcp6231ut-e-lt",   "title": "MCP6231UT-E/LT",   "brief": "Microchip Operational Amplifier, SC-70-5. Pinout extracted from the datasheet, KiCad symbol/footprint/3D.",-  "version": "0.1.0",+  "version": "0.1.1",   "license": "CC-BY-SA-4.0",   "tags": [     "component",@@ -22,7 +22,7 @@     "parts": {       "symbol": "mcp6231ut-e.kicad_sym",       "footprint": "mcp6231ut-e.kicad_mod",-      "model_3d": "mcp6231ut-e-etched.glb",+      "model_3d": "mcp6231ut-e-lt-hero.glb",       "model_3d_plain": "mcp6231ut-e.glb",       "model_3d_step": "mcp6231ut-e-etched.step",       "model_3d_step_plain": "mcp6231ut-e.step",@@ -169,11 +169,12 @@     "docs/mcp6231ut-e-datasheet.pdf",     "viewers/symbol.html",     "viewers/footprint.html",-    "mcp6231ut-e-etched.step"+    "mcp6231ut-e-etched.step",+    "mcp6231ut-e-etched.glb",+    "mcp6231ut-e-lt-hero.glb",+    "mcp6231ut-e-lt-hero.overlay.json"   ],-  "visibility": {-    "public": true-  },+  "visibility": "public",   "variants": [     {       "mpn": "MCP6231UT-ELT",@@ -188,5 +189,7 @@       "kind": "packaging"     }   ],-  "updated_at": "2026-09-28T19:12:14.485Z"-}+  "updated_at": "2026-09-28T19:12:14.485Z",+  "description": "Microchip Operational Amplifier, SC-70-5. Datasheet-verified pinout, KiCad symbol/footprint/3D.",+  "org": "adom"+}\ No newline at end of file