← Commit history
mcp61s: restore the component block (pinout + model declarations) from this page's own README and symbol
1 file changed
+170−1
page.json+170−1@@ -33,5 +33,174 @@ "author": { "name": "Ray", "email": "[email protected]"+ },+ "component": {+ "mpn": "MCP61S",+ "manufacturer": "Mysentech",+ "package": "QFN-24-EP(4x4)",+ "pin_count": 24,+ "category": "Float Level Senors",+ "parts": {+ "symbol": "mcp61s.kicad_sym",+ "footprint": "mcp61s.kicad_mod",+ "model_3d": "mcp61s-etched.glb",+ "model_3d_plain": "mcp61s.glb",+ "model_3d_step": "mcp61s-etched.step",+ "model_3d_step_plain": "mcp61s.step",+ "lbr": "mcp61s.lbr"+ },+ "pins": [+ {+ "number": "1",+ "name": "PA3",+ "type": "bidirectional",+ "description": "General-purpose I/O port PA3. Standard TC-level I/O; input signal must not exceed VDD. Alternate functions: USART1_RX, USART2_SCK, SPI1_NSS; additional function: ADC1_VIN[2]."+ },+ {+ "number": "2",+ "name": "PA14/NRST",+ "type": "bidirectional",+ "description": "General-purpose I/O port PA14. Standard TC-level I/O. Alternate functions: SWCLK, USART1_TX, SPI1_SCK. When RCC_SYSCFG SFT_NRST_RMP bit is set to 1, PA14 is remapped as NRST external reset input; reset low pulse must be at least 4 µs."+ },+ {+ "number": "3",+ "name": "PB0/OSCIN",+ "type": "bidirectional",+ "description": "General-purpose I/O port PB0, also serves as external HSE clock input (OSCIN, up to 48 MHz). Standard TC-level I/O. Alternate function: USART2_SCK; additional function: ADC1_VIN[1]."+ },+ {+ "number": "4",+ "name": "PA1",+ "type": "bidirectional",+ "description": "General-purpose I/O port PA1. Standard TC-level I/O; input signal must not exceed VDD. Alternate functions: USART1_SCK, USART2_TX, I2C1_SDA, SPI1_MOSI."+ },+ {+ "number": "5",+ "name": "VDD",+ "type": "power_in",+ "description": "Main digital power supply. Operating range 2.5 V to 5.5 V (typ. 3.3 V); absolute max 5.8 V. Decouple to GND near the pin."+ },+ {+ "number": "6",+ "name": "PA15",+ "type": "bidirectional",+ "description": "General-purpose I/O port PA15. Standard TC-level I/O. Alternate functions: SPI1_NSS, TIM1_CH3N, SPI1_MOSI, TIM3_CH3; additional function: ADC1_VIN[6]."+ },+ {+ "number": "7",+ "name": "GND",+ "type": "power_in",+ "description": "Digital ground reference. Tie to system ground plane."+ },+ {+ "number": "8",+ "name": "PA0",+ "type": "bidirectional",+ "description": "General-purpose I/O port PA0. Standard TC-level I/O. Alternate functions: SPI1_NSS, USART1_RX, TIM1_CH3N, I2C1_SCL, TIM3_CH3."+ },+ {+ "number": "9",+ "name": "PA4",+ "type": "bidirectional",+ "description": "General-purpose I/O port PA4. Standard TC-level I/O. Alternate functions: TIM1_BKIN, I2C1_SDA, TIM3_CH4."+ },+ {+ "number": "10",+ "name": "PA5",+ "type": "bidirectional",+ "description": "General-purpose I/O port PA5. Standard TC-level I/O. Alternate functions: SPI1_SCK, TIM1_CH1N, I2C1_SCL."+ },+ {+ "number": "11",+ "name": "GND",+ "type": "power_in",+ "description": "Digital ground reference. Tie to system ground plane."+ },+ {+ "number": "12",+ "name": "VDDA",+ "type": "power_in",+ "description": "Analog power supply for the CAP-AFE and ADC. Same 2.5-5.5 V range as VDD; typically tied to VDD through an isolation filter for best analog performance."+ },+ {+ "number": "13",+ "name": "GNDA",+ "type": "power_in",+ "description": "Analog ground reference for the CAP-AFE and ADC. Tie to the system ground plane (typically star-connected to GND)."+ },+ {+ "number": "14",+ "name": "C0N",+ "type": "input",+ "description": "Channel 0 capacitive sensor input, negative side of the differential pair. Connect together with C0P to the measured differential capacitor plates."+ },+ {+ "number": "15",+ "name": "C0P",+ "type": "input",+ "description": "Channel 0 capacitive sensor input, positive side of the differential pair. Connect together with C0N to the measured differential capacitor plates (typ. sensor capacitance range 1-1000 pF)."+ },+ {+ "number": "16",+ "name": "VT",+ "type": "output",+ "description": "Temperature voltage output; a negative-temperature-coefficient voltage used with an external ADC (10-bit is sufficient) for approximate temperature measurement. Recommend a 1 nF external capacitor to GND for a ~1 ms settling time."+ },+ {+ "number": "17",+ "name": "C1N",+ "type": "input",+ "description": "Channel 1 capacitive sensor input, negative side of the differential pair. Typically used for the reference capacitor of the ratiometric measurement."+ },+ {+ "number": "18",+ "name": "C1P",+ "type": "input",+ "description": "Channel 1 capacitive sensor input, positive side of the differential pair. Typically used with C1N for the reference capacitor of the ratiometric measurement."+ },+ {+ "number": "19",+ "name": "NC",+ "type": "unconnected",+ "description": "No connect. Leave floating or tie to GND per PCB practice."+ },+ {+ "number": "20",+ "name": "RUP",+ "type": "bidirectional",+ "description": "External resistance pin for the CAP-AFE. Requires an external pull-up resistor (recommended 10 kΩ) to VDD per the typical application circuit."+ },+ {+ "number": "21",+ "name": "PA10",+ "type": "bidirectional",+ "description": "General-purpose I/O port PA10. Standard TC-level I/O. Alternate functions: SPI1_MISO, TIM1_CH3, TIM1_CH2, MCO (main clock output), USART1_TX."+ },+ {+ "number": "22",+ "name": "PA13",+ "type": "bidirectional",+ "description": "General-purpose I/O port PA13. Standard TC-level I/O. Alternate functions: SWDIO (serial-wire debug data), USART1_RX, USART2_RX, I2C1_SCL, SPI1_MISO."+ },+ {+ "number": "23",+ "name": "PA2",+ "type": "bidirectional",+ "description": "General-purpose I/O port PA2. Standard TC-level I/O. Alternate functions: TIM1_CH2N, SPI1_MISO, TIM3_CH2; additional function: ADC1_VIN[5]."+ },+ {+ "number": "24",+ "name": "PA12",+ "type": "bidirectional",+ "description": "General-purpose I/O port PA12. Standard TC-level I/O. Alternate function: USART1_TX; additional function: ADC1_VIN[3]."+ }+ ],+ "provenance": {+ "rebuilt": "component block rebuilt 2026-10-05 from this page's own README pinout table and .kicad_sym (pins cross-checked), no re-extraction"+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ } }-}+}