component
MCP6001UT-I
Public Made by Adomby adom
Microchip Operational Amplifier, SOT-23-5. Pinout extracted from the datasheet, KiCad symbol/footprint/3D.
← Commit history
page.json+9−6@@ -32,31 +32,31 @@ "number": "1", "name": "VIN+", "type": "input",- "description": "Non-inverting analog input. High-impedance CMOS input with typ. \u00b11 pA bias current; common-mode range extends from VSS \u2212 0.3 V to VDD + 0.3 V (rail-to-rail input)."+ "description": "Non-inverting analog input. High-impedance CMOS input with typ. ±1 pA bias current; common-mode range extends from VSS − 0.3 V to VDD + 0.3 V (rail-to-rail input)." }, { "number": "2", "name": "VSS", "type": "power_in",- "description": "Negative power supply / ground. Typically tied to GND in single-supply operation. VDD \u2212 VSS must be between 1.8 V and 5.5 V (absolute max 7.0 V)."+ "description": "Negative power supply / ground. Typically tied to GND in single-supply operation. VDD − VSS must be between 1.8 V and 5.5 V (absolute max 7.0 V)." }, { "number": "3", "name": "VIN-", "type": "input",- "description": "Inverting analog input. High-impedance CMOS input with typ. \u00b11 pA bias current; rail-to-rail common-mode range (VSS \u2212 0.3 V to VDD + 0.3 V)."+ "description": "Inverting analog input. High-impedance CMOS input with typ. ±1 pA bias current; rail-to-rail common-mode range (VSS − 0.3 V to VDD + 0.3 V)." }, { "number": "4", "name": "VOUT", "type": "output",- "description": "Analog output. Low-impedance rail-to-rail output; swings to within ~25 mV of either supply rail with 10 k\u03a9 load. Short-circuit current \u00b16 mA (VDD = 1.8 V) to \u00b123 mA (VDD = 5.5 V)."+ "description": "Analog output. Low-impedance rail-to-rail output; swings to within ~25 mV of either supply rail with 10 kΩ load. Short-circuit current ±6 mA (VDD = 1.8 V) to ±23 mA (VDD = 5.5 V)." }, { "number": "5", "name": "VDD", "type": "power_in",- "description": "Positive power supply, 1.8 V to 5.5 V (absolute max 7.0 V above VSS). Requires a 0.01-0.1 \u00b5F local bypass capacitor within 2 mm of the pin, plus a bulk 1 \u00b5F (or larger) capacitor within 100 mm."+ "description": "Positive power supply, 1.8 V to 5.5 V (absolute max 7.0 V above VSS). Requires a 0.01-0.1 µF local bypass capacitor within 2 mm of the pin, plus a bulk 1 µF (or larger) capacitor within 100 mm." } ], "provenance": {@@ -120,5 +120,8 @@ "docs/mcp6001ut-i-datasheet.pdf", "viewers/symbol.html", "viewers/footprint.html"- ]+ ],+ "visibility": {+ "public": true+ } }