← Commit history
Publish 0.1.1
4 files changed
+589−11
mcp42010t-i-hero.glbadded⋯ 1 unchanged line ⋯
mcp42010t-i-hero.overlay.jsonadded+392@@ -0,0 +1,392 @@+{+ "spec": "adom-hero 1.4",+ "mpn": "MCP42010T-I",+ "kind": "component + footprint reference art",+ "board_use": false,+ "plane_z_mm": -0.02,+ "units": "metre",+ "upAxis": "Z",+ "layers": {+ "pad_outlines": {+ "material": "Footprint pads - teal dashed outlines - 50 percent opacity",+ "rgba": [+ 0.0,+ 0.902,+ 0.863,+ 0.5+ ],+ "pads": 14,+ "span_mm": 7.2,+ "dash_mm": 0.18,+ "gap_mm": 0.108,+ "pad_stroke_mm": 0.0432+ },+ "silkscreen": {+ "material": "Silkscreen reference lines - 30 percent opacity",+ "rgba": [+ 0.92,+ 0.96,+ 1.0,+ 0.3+ ],+ "footprint_items": 7,+ "pin1": {+ "source": "footprint silkscreen",+ "pad": "1"+ }+ },+ "signal_names": {+ "material": "Signal names - 50 percent opacity",+ "rgba": [+ 0.92,+ 0.96,+ 1.0,+ 0.5+ ],+ "font": "DejaVu Sans Mono",+ "labels": 14,+ "sides": "top + mirrored underside (single-sided)",+ "fallback_to_pad_number": 0+ }+ },+ "align": {+ "ok": true,+ "centre_offset_mm": 0.0,+ "tolerance_mm": 0.576,+ "orientation_flipped": false,+ "contacts_bbox_mm": [+ -3.2,+ 3.2,+ -2.08,+ 2.08+ ],+ "pads_bbox_mm": [+ -3.6,+ 3.6,+ -2.15,+ 2.15+ ],+ "seating_z_mm": -0.0+ },+ "sources": {+ "glb": "mcp42010t-i-etched.glb",+ "glb_sha256": "59f045b9931699b782f6f4abbc163b4964a7bc6b9f0f41eeda95cec9c5905fd0",+ "footprint": "mcp42010t-i.kicad_mod",+ "footprint_sha256": "e4bf82cea6d3b3259ddf42469b1407628ad1181a28ae6f3f340190c0cca31ccd",+ "pins": "page.json component.pins",+ "pins_sha256": "89428e5e73a074175df2419a00a07bc8af07fc99f304461e96ef2d2875e44406"+ },+ "generator": "adom-wiki 1.8.31 (component_hero)",+ "labels": [+ {+ "pad": "1",+ "text": "CS",+ "x": -3.7,+ "y": -1.95,+ "align": "right",+ "vertical": false,+ "h": 0.325+ },+ {+ "pad": "2",+ "text": "SCK",+ "x": -3.7,+ "y": -1.3,+ "align": "right",+ "vertical": false,+ "h": 0.325+ },+ {+ "pad": "3",+ "text": "SI",+ "x": -3.7,+ "y": -0.65,+ "align": "right",+ "vertical": false,+ "h": 0.325+ },+ {+ "pad": "4",+ "text": "VSS",+ "x": -3.7,+ "y": 0.0,+ "align": "right",+ "vertical": false,+ "h": 0.325+ },+ {+ "pad": "5",+ "text": "PB1",+ "x": -3.7,+ "y": 0.65,+ "align": "right",+ "vertical": false,+ "h": 0.325+ },+ {+ "pad": "6",+ "text": "PW1",+ "x": -3.7,+ "y": 1.3,+ "align": "right",+ "vertical": false,+ "h": 0.325+ },+ {+ "pad": "7",+ "text": "PA1",+ "x": -3.7,+ "y": 1.95,+ "align": "right",+ "vertical": false,+ "h": 0.325+ },+ {+ "pad": "8",+ "text": "PA0",+ "x": 3.7,+ "y": 1.95,+ "align": "left",+ "vertical": false,+ "h": 0.325+ },+ {+ "pad": "9",+ "text": "PW0",+ "x": 3.7,+ "y": 1.3,+ "align": "left",+ "vertical": false,+ "h": 0.325+ },+ {+ "pad": "10",+ "text": "PB0",+ "x": 3.7,+ "y": 0.65,+ "align": "left",+ "vertical": false,+ "h": 0.325+ },+ {+ "pad": "11",+ "text": "RS",+ "x": 3.7,+ "y": 0.0,+ "align": "left",+ "vertical": false,+ "h": 0.325+ },+ {+ "pad": "12",+ "text": "SHDN",+ "x": 3.7,+ "y": -0.65,+ "align": "left",+ "vertical": false,+ "h": 0.325+ },+ {+ "pad": "13",+ "text": "SO",+ "x": 3.7,+ "y": -1.3,+ "align": "left",+ "vertical": false,+ "h": 0.325+ },+ {+ "pad": "14",+ "text": "VDD",+ "x": 3.7,+ "y": -1.95,+ "align": "left",+ "vertical": false,+ "h": 0.325+ }+ ],+ "pads": [+ {+ "number": "1",+ "shape": "roundrect",+ "center_mm": [+ -2.8625,+ -1.95+ ],+ "size_mm": [+ 1.475,+ 0.4+ ],+ "rot": 0.0+ },+ {+ "number": "2",+ "shape": "roundrect",+ "center_mm": [+ -2.8625,+ -1.3+ ],+ "size_mm": [+ 1.475,+ 0.4+ ],+ "rot": 0.0+ },+ {+ "number": "3",+ "shape": "roundrect",+ "center_mm": [+ -2.8625,+ -0.65+ ],+ "size_mm": [+ 1.475,+ 0.4+ ],+ "rot": 0.0+ },+ {+ "number": "4",+ "shape": "roundrect",+ "center_mm": [+ -2.8625,+ 0.0+ ],+ "size_mm": [+ 1.475,+ 0.4+ ],+ "rot": 0.0+ },+ {+ "number": "5",+ "shape": "roundrect",+ "center_mm": [+ -2.8625,+ 0.65+ ],+ "size_mm": [+ 1.475,+ 0.4+ ],+ "rot": 0.0+ },+ {+ "number": "6",+ "shape": "roundrect",+ "center_mm": [+ -2.8625,+ 1.3+ ],+ "size_mm": [+ 1.475,+ 0.4+ ],+ "rot": 0.0+ },+ {+ "number": "7",+ "shape": "roundrect",+ "center_mm": [+ -2.8625,+ 1.95+ ],+ "size_mm": [+ 1.475,+ 0.4+ ],+ "rot": 0.0+ },+ {+ "number": "8",+ "shape": "roundrect",+ "center_mm": [+ 2.8625,+ 1.95+ ],+ "size_mm": [+ 1.475,+ 0.4+ ],+ "rot": 0.0+ },+ {+ "number": "9",+ "shape": "roundrect",+ "center_mm": [+ 2.8625,+ 1.3+ ],+ "size_mm": [+ 1.475,+ 0.4+ ],+ "rot": 0.0+ },+ {+ "number": "10",+ "shape": "roundrect",+ "center_mm": [+ 2.8625,+ 0.65+ ],+ "size_mm": [+ 1.475,+ 0.4+ ],+ "rot": 0.0+ },+ {+ "number": "11",+ "shape": "roundrect",+ "center_mm": [+ 2.8625,+ 0.0+ ],+ "size_mm": [+ 1.475,+ 0.4+ ],+ "rot": 0.0+ },+ {+ "number": "12",+ "shape": "roundrect",+ "center_mm": [+ 2.8625,+ -0.65+ ],+ "size_mm": [+ 1.475,+ 0.4+ ],+ "rot": 0.0+ },+ {+ "number": "13",+ "shape": "roundrect",+ "center_mm": [+ 2.8625,+ -1.3+ ],+ "size_mm": [+ 1.475,+ 0.4+ ],+ "rot": 0.0+ },+ {+ "number": "14",+ "shape": "roundrect",+ "center_mm": [+ 2.8625,+ -1.95+ ],+ "size_mm": [+ 1.475,+ 0.4+ ],+ "rot": 0.0+ }+ ]+}
package.json+187−4@@ -1,6 +1,6 @@ { "slug": "mcp42010t-i",- "version": "0.1.0",+ "version": "0.1.1", "type": "component", "description": "Microchip Tech Digital Potentiometers, TSSOP-14. Datasheet-verified pinout, KiCad symbol/footprint/3D.", "tags": [@@ -24,6 +24,189 @@ "docs/hero.png", "docs/mcp42010t-i-datasheet.pdf", "viewers/symbol.html",- "viewers/footprint.html"- ]-}+ "viewers/footprint.html",+ "mcp42010t-i-etched.step",+ "mcp42010t-i-hero.glb",+ "mcp42010t-i-hero.overlay.json"+ ],+ "component": {+ "mpn": "MCP42010T-I",+ "manufacturer": "Microchip Tech",+ "package": "TSSOP-14",+ "pin_count": 14,+ "category": "Data Acquisition",+ "subcategory": "Digital Potentiometers",+ "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588941284174409728",+ "parts": {+ "symbol": "mcp42010t-i.kicad_sym",+ "footprint": "mcp42010t-i.kicad_mod",+ "model_3d": "mcp42010t-i-hero.glb",+ "model_3d_plain": "mcp42010t-i.glb",+ "model_3d_step": "mcp42010t-i-etched.step",+ "model_3d_step_plain": "mcp42010t-i.step",+ "lbr": "mcp42010t-i.lbr"+ },+ "distributor_links": {},+ "pins": [+ {+ "number": "1",+ "name": "CS",+ "type": "input",+ "description": "SPI chip-select input (active-low). Used to execute a new command after it has been loaded into the shift register. Schmitt Trigger input; gates SCK/SI so no additional current is drawn while CS is high."+ },+ {+ "number": "2",+ "name": "SCK",+ "type": "input",+ "description": "SPI serial clock input. Data on SI is latched on the rising edge and driven out on SO on the falling edge. Schmitt Trigger input; gated by CS."+ },+ {+ "number": "3",+ "name": "SI",+ "type": "input",+ "description": "SPI serial data input (MOSI). Command and data bytes are clocked into the shift register on this pin. Schmitt Trigger input; gated by CS."+ },+ {+ "number": "4",+ "name": "VSS",+ "type": "power_in",+ "description": "Device ground / negative supply reference (0 V). Return for both analog resistor terminals and digital I/O."+ },+ {+ "number": "5",+ "name": "PB1",+ "type": "passive",+ "description": "Potentiometer 1 Terminal B connection. No polarity restriction versus PA1/PW1; nominal end-to-end resistance PA1-PB1 = 10 kΩ. Voltage on this terminal must be within VSS to VDD."+ },+ {+ "number": "6",+ "name": "PW1",+ "type": "passive",+ "description": "Potentiometer 1 Wiper connection. Wiper position (0..255) is controlled via SPI; wiper resistance RW ≈ 52 Ω typical at code 00h, VDD = 5.5V. Max wiper current IW = ±1 mA."+ },+ {+ "number": "7",+ "name": "PA1",+ "type": "passive",+ "description": "Potentiometer 1 Terminal A connection. Opposite end of the 10 kΩ resistor array from PB1. In shutdown mode this terminal is open-circuited from the resistor stack."+ },+ {+ "number": "8",+ "name": "PA0",+ "type": "passive",+ "description": "Potentiometer 0 Terminal A connection. One end of the 10 kΩ resistor array for channel 0. In shutdown mode this terminal is open-circuited from the resistor stack."+ },+ {+ "number": "9",+ "name": "PW0",+ "type": "passive",+ "description": "Potentiometer 0 Wiper connection. Wiper position (0..255) is controlled via SPI; wiper resistance RW ≈ 52 Ω typical at code 00h, VDD = 5.5V. Max wiper current IW = ±1 mA."+ },+ {+ "number": "10",+ "name": "PB0",+ "type": "passive",+ "description": "Potentiometer 0 Terminal B connection. Opposite end of the 10 kΩ resistor array from PA0. Voltage on this terminal must be within VSS to VDD."+ },+ {+ "number": "11",+ "name": "RS",+ "type": "input",+ "description": "Hardware reset input (active-low). Pulling RS low for at least 150 ns sets both wipers to mid-scale (code 80h). Has an internal active pull-up so it should not be left floating; do not toggle RS low while CS is low."+ },+ {+ "number": "12",+ "name": "SHDN",+ "type": "input",+ "description": "Hardware shutdown input (active-low), Schmitt Trigger. When low, terminal A is open-circuited and PB/PW are shorted for both potentiometers to save power. Has an internal active pull-up; do not leave floating and do not toggle low while CS is low."+ },+ {+ "number": "13",+ "name": "SO",+ "type": "output",+ "description": "SPI serial data output (MISO), used for daisy-chaining multiple MCP42XXX devices. Data is clocked out on the falling edge of SCK. Push-pull output that does not go high-Z when CS is high - it drives logic-low while CS is high."+ },+ {+ "number": "14",+ "name": "VDD",+ "type": "power_in",+ "description": "Positive supply input, 2.7 V to 5.5 V single-supply operation. Static supply current is <1 µA typical; active supply current is ~340 µA typical at 5.5 V with fSCK = 10 MHz."+ }+ ],+ "provenance": {+ "extractor": "ds2sf",+ "datasheet": {+ "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588941284174409728",+ "pages": null,+ "sha256": "6bee8156c8b9f1f6",+ "source_tier": "lcsc"+ },+ "cad": "KiCad official (CC-BY-SA 4.0)",+ "pins": {+ "total": 14,+ "described": 14,+ "cites_pages": true,+ "refuses_to_fabricate": true+ }+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ },+ "models_3d": [+ {+ "file": "mcp42010t-i.step",+ "role": "plain",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 6.4,+ 5,+ 1+ ],+ "zmin_mm": 0,+ "centre_offset_mm": 0,+ "footprint_binding": "identity",+ "sha256": "3ee5786aae56190997aa793ba3cfc003fd616782770e29719b4562f012982245",+ "checked": "2026-10-07",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ },+ {+ "file": "mcp42010t-i-etched.step",+ "role": "eda",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 6.4,+ 5,+ 1+ ],+ "zmin_mm": 0,+ "centre_offset_mm": 0,+ "footprint_binding": "identity",+ "sha256": "9ad99d03448b7df03c88cbf01dc884c5d730a794358a7787ac94f4b8c6e99830",+ "checked": "2026-10-07",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ }+ ]+ },+ "title": "MCP42010T-I",+ "brief": "Microchip Tech Digital Potentiometers, TSSOP-14. Pinout extracted from the datasheet, KiCad symbol/footprint/3D.",+ "metadata": {+ "specs": {+ "Manufacturer": "Microchip Tech",+ "Package": "TSSOP-14",+ "Category": "Data Acquisition",+ "Pins": "14"+ }+ },+ "discovery_triggers": [+ "mcp42010t-i"+ ],+ "discovery_pitch": "MCP42010T-I (Microchip Tech) component page with datasheet-verified CAD.",+ "visibility": "public"+}
page.json+10−7@@ -4,7 +4,7 @@ "slug": "mcp42010t-i", "title": "MCP42010T-I", "brief": "Microchip Tech Digital Potentiometers, TSSOP-14. Pinout extracted from the datasheet, KiCad symbol/footprint/3D.",- "version": "0.1.0",+ "version": "0.1.1", "license": "CC-BY-SA-4.0", "tags": [ "component",@@ -240,10 +240,13 @@ "docs/hero.png", "docs/mcp42010t-i-datasheet.pdf", "viewers/symbol.html",- "viewers/footprint.html"+ "viewers/footprint.html",+ "mcp42010t-i-etched.step",+ "mcp42010t-i-hero.glb",+ "mcp42010t-i-hero.overlay.json" ],- "visibility": {- "public": true- },- "updated_at": "2026-09-28T19:08:31.379Z"-}+ "visibility": "public",+ "updated_at": "2026-09-28T19:08:31.379Z",+ "description": "Microchip Tech Digital Potentiometers, TSSOP-14. Datasheet-verified pinout, KiCad symbol/footprint/3D.",+ "org": "adom"+}