component
MCP42010T-I
Public Made by Adomby adom
Microchip Tech Digital Potentiometers, TSSOP-14. Pinout extracted from the datasheet, KiCad symbol/footprint/3D.
← Commit history
page.json+178−8@@ -1,13 +1,188 @@ {+ "schema_version": 1,+ "type": "component", "slug": "mcp42010t-i",+ "title": "MCP42010T-I",+ "brief": "Microchip Tech Digital Potentiometers, TSSOP-14. Datasheet-verified pinout, KiCad symbol/footprint/3D.", "version": "0.1.0",- "type": "component",- "description": "Microchip Tech Digital Potentiometers, TSSOP-14. Datasheet-verified pinout, KiCad symbol/footprint/3D.",+ "license": "CC-BY-SA-4.0", "tags": [ "component", "data acquisition", "mcp42010t-i" ],+ "component": {+ "mpn": "MCP42010T-I",+ "manufacturer": "Microchip Tech",+ "package": "TSSOP-14",+ "pin_count": 14,+ "category": "Data Acquisition",+ "subcategory": "Digital Potentiometers",+ "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588941284174409728",+ "parts": {+ "symbol": "mcp42010t-i.kicad_sym",+ "footprint": "mcp42010t-i.kicad_mod",+ "model_3d": "mcp42010t-i.glb",+ "model_3d_step": "mcp42010t-i.step",+ "lbr": "mcp42010t-i.lbr"+ },+ "distributor_links": {},+ "pins": [+ {+ "number": "1",+ "name": "CS",+ "type": "input",+ "description": "SPI chip-select input (active-low). Used to execute a new command after it has been loaded into the shift register. Schmitt Trigger input; gates SCK/SI so no additional current is drawn while CS is high."+ },+ {+ "number": "2",+ "name": "SCK",+ "type": "input",+ "description": "SPI serial clock input. Data on SI is latched on the rising edge and driven out on SO on the falling edge. Schmitt Trigger input; gated by CS."+ },+ {+ "number": "3",+ "name": "SI",+ "type": "input",+ "description": "SPI serial data input (MOSI). Command and data bytes are clocked into the shift register on this pin. Schmitt Trigger input; gated by CS."+ },+ {+ "number": "4",+ "name": "VSS",+ "type": "power_in",+ "description": "Device ground / negative supply reference (0 V). Return for both analog resistor terminals and digital I/O."+ },+ {+ "number": "5",+ "name": "PB1",+ "type": "passive",+ "description": "Potentiometer 1 Terminal B connection. No polarity restriction versus PA1/PW1; nominal end-to-end resistance PA1-PB1 = 10 k\u03a9. Voltage on this terminal must be within VSS to VDD."+ },+ {+ "number": "6",+ "name": "PW1",+ "type": "passive",+ "description": "Potentiometer 1 Wiper connection. Wiper position (0..255) is controlled via SPI; wiper resistance RW \u2248 52 \u03a9 typical at code 00h, VDD = 5.5V. Max wiper current IW = \u00b11 mA."+ },+ {+ "number": "7",+ "name": "PA1",+ "type": "passive",+ "description": "Potentiometer 1 Terminal A connection. Opposite end of the 10 k\u03a9 resistor array from PB1. In shutdown mode this terminal is open-circuited from the resistor stack."+ },+ {+ "number": "8",+ "name": "PA0",+ "type": "passive",+ "description": "Potentiometer 0 Terminal A connection. One end of the 10 k\u03a9 resistor array for channel 0. In shutdown mode this terminal is open-circuited from the resistor stack."+ },+ {+ "number": "9",+ "name": "PW0",+ "type": "passive",+ "description": "Potentiometer 0 Wiper connection. Wiper position (0..255) is controlled via SPI; wiper resistance RW \u2248 52 \u03a9 typical at code 00h, VDD = 5.5V. Max wiper current IW = \u00b11 mA."+ },+ {+ "number": "10",+ "name": "PB0",+ "type": "passive",+ "description": "Potentiometer 0 Terminal B connection. Opposite end of the 10 k\u03a9 resistor array from PA0. Voltage on this terminal must be within VSS to VDD."+ },+ {+ "number": "11",+ "name": "RS",+ "type": "input",+ "description": "Hardware reset input (active-low). Pulling RS low for at least 150 ns sets both wipers to mid-scale (code 80h). Has an internal active pull-up so it should not be left floating; do not toggle RS low while CS is low."+ },+ {+ "number": "12",+ "name": "SHDN",+ "type": "input",+ "description": "Hardware shutdown input (active-low), Schmitt Trigger. When low, terminal A is open-circuited and PB/PW are shorted for both potentiometers to save power. Has an internal active pull-up; do not leave floating and do not toggle low while CS is low."+ },+ {+ "number": "13",+ "name": "SO",+ "type": "output",+ "description": "SPI serial data output (MISO), used for daisy-chaining multiple MCP42XXX devices. Data is clocked out on the falling edge of SCK. Push-pull output that does not go high-Z when CS is high - it drives logic-low while CS is high."+ },+ {+ "number": "14",+ "name": "VDD",+ "type": "power_in",+ "description": "Positive supply input, 2.7 V to 5.5 V single-supply operation. Static supply current is <1 \u00b5A typical; active supply current is ~340 \u00b5A typical at 5.5 V with fSCK = 10 MHz."+ }+ ],+ "provenance": {+ "extractor": "ds2sf",+ "datasheet": {+ "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588941284174409728",+ "pages": null,+ "sha256": "6bee8156c8b9f1f6",+ "source_tier": "lcsc"+ },+ "cad": "KiCad official (CC-BY-SA 4.0)",+ "pins": {+ "total": 14,+ "described": 14,+ "cites_pages": true,+ "refuses_to_fabricate": true+ }+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ }+ },+ "metadata": {+ "specs": {+ "Manufacturer": "Microchip Tech",+ "Package": "TSSOP-14",+ "Category": "Data Acquisition",+ "Pins": "14"+ }+ },+ "variants": [+ {+ "mpn": "MCP42010T-I/ST",+ "kind": "packaging"+ },+ {+ "mpn": "MCP42010T-I-E/ST",+ "kind": "packaging"+ },+ {+ "mpn": "MCP42010T-I/SL",+ "kind": "packaging"+ },+ {+ "mpn": "MCP42010T-I-E/SL",+ "kind": "packaging"+ },+ {+ "mpn": "MCP42010T-I-E/P",+ "kind": "packaging"+ },+ {+ "mpn": "MCP42010T-I/P",+ "kind": "packaging"+ }+ ],+ "sections": [+ "hero",+ "viewers",+ "readme",+ "breadcrumbs",+ "info"+ ],+ "discovery_triggers": [+ "mcp42010t-i"+ ],+ "discovery_pitch": "MCP42010T-I (Microchip Tech) component page with datasheet-verified CAD.",+ "author": {+ "name": "Ray",+ "email": "[email protected]"+ }, "dependencies": {}, "hero": { "type": "image",@@ -25,10 +200,5 @@ "docs/mcp42010t-i-datasheet.pdf", "viewers/symbol.html", "viewers/footprint.html"- ],- "visibility": "public",- "author": {- "name": "Ray",- "email": "[email protected]"- }+ ] }