← Commit history
README.mdadded+50@@ -0,0 +1,50 @@+# MCP42010-I++**Microchip Tech** · Digital Potentiometers · SOIC-14++MCP42010-I from Microchip Tech, in a SOIC-14. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | CS | input | Chip Select for SPI interface; Schmitt Trigger input used to execute new command after loading into shift register. |+| 2 | SCK | input | Serial Clock for SPI interface; Schmitt Trigger input that clocks data into SI on rising edge and out of SO on falling edge; gated to CS pin. |+| 3 | SI | input | Serial Data Input for SPI interface; Schmitt Trigger input for clocking command and data bytes into shift register; gated to CS pin. |+| 4 | VSS | power_in | Ground; voltage reference for digital and analog circuits (0 V). |+| 5 | PB1 | passive | Potentiometer Terminal B for Pot 1; resistor terminal with voltage range 0 to VDD. |+| 6 | PW1 | passive | Wiper Connection for Pot 1; potentiometer wiper terminal with voltage range 0 to VDD. |+| 7 | PA1 | passive | Potentiometer Terminal A for Pot 1; resistor terminal with voltage range 0 to VDD. |+| 8 | PA0 | passive | Potentiometer Terminal A for Pot 0; resistor terminal with voltage range 0 to VDD. |+| 9 | PW0 | passive | Wiper Connection for Pot 0; potentiometer wiper terminal with voltage range 0 to VDD. |+| 10 | PB0 | passive | Potentiometer Terminal B for Pot 0; resistor terminal with voltage range 0 to VDD. |+| 11 | RS | input | Reset Input; pulling low for minimum 150 ns sets all potentiometers to mid-scale (Code 80h); has active pull-up; do not leave floating. |+| 12 | SHDN | input | Shutdown Input; Schmitt Trigger input that when pulled low places device in power-saving mode by open-circuiting A terminal and shorting B to W terminals; has active pull-up; do not leave floating. |+| 13 | SO | output | Serial Data Output for daisy-chaining; push-pull output that clocks data out on falling edge of clock and drives low when CS is high. |+| 14 | VDD | power_in | Power Supply; positive supply voltage 2.7 V to 5.5 V; bypass with 0.1 µF capacitor close to pin. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Microchip Tech |+| Package | SOIC-14 |+| Category | Data Acquisition |+| Pins | 14 |++## CAD (KiCad official)++- Symbol: `MCP42010-I`+- Footprint: `Package_SO:SOIC-14_3.9x8.7mm_P1.27mm`+- 3D model: SOIC-14 (KiCad packages3D, STEP)+- 3D model files: `mcp42010-i-etched.step` / `mcp42010-i-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `mcp42010-i.step` / `mcp42010-i.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Microchip Tech datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588884916817420288) (32 pp, sha256 `6bee8156c8b9f1f6`, retrieved 2026-09-22, tier: lcsc)+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.2`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-4-6` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/mcp42010-i-datasheet.pdf)
page.jsonadded+177@@ -0,0 +1,177 @@+{+ "slug": "mcp42010-i",+ "version": "0.1.0",+ "type": "component",+ "description": "Microchip Tech Digital Potentiometers, SOIC-14. Datasheet-verified pinout, KiCad symbol/footprint/3D.",+ "tags": [+ "component",+ "data acquisition",+ "mcp42010-i",+ "factory-2.0.0",+ "extractor-text"+ ],+ "dependencies": {},+ "hero": {+ "type": "image",+ "path": "docs/hero.png"+ },+ "files": [+ "page.json",+ "README.md",+ "mcp42010-i.kicad_sym",+ "mcp42010-i.kicad_mod",+ "mcp42010-i.glb",+ "mcp42010-i.step",+ "mcp42010-i.lbr",+ "docs/hero.png",+ "docs/mcp42010-i-datasheet.pdf",+ "viewers/symbol.html",+ "viewers/footprint.html"+ ],+ "component": {+ "mpn": "MCP42010-I",+ "manufacturer": "Microchip Tech",+ "package": "SOIC-14",+ "pin_count": 14,+ "category": "Data Acquisition",+ "subcategory": "Digital Potentiometers",+ "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588884916817420288",+ "parts": {+ "symbol": "mcp42010-i.kicad_sym",+ "footprint": "mcp42010-i.kicad_mod",+ "model_3d": "mcp42010-i-etched.glb",+ "model_3d_plain": "mcp42010-i.glb",+ "model_3d_step": "mcp42010-i-etched.step",+ "model_3d_step_plain": "mcp42010-i.step",+ "lbr": "mcp42010-i.lbr"+ },+ "distributor_links": {+ "lcsc": "C481366"+ },+ "pins": [+ {+ "number": "1",+ "name": "CS",+ "type": "input",+ "description": "Chip Select for SPI interface; Schmitt Trigger input used to execute new command after loading into shift register."+ },+ {+ "number": "2",+ "name": "SCK",+ "type": "input",+ "description": "Serial Clock for SPI interface; Schmitt Trigger input that clocks data into SI on rising edge and out of SO on falling edge; gated to CS pin."+ },+ {+ "number": "3",+ "name": "SI",+ "type": "input",+ "description": "Serial Data Input for SPI interface; Schmitt Trigger input for clocking command and data bytes into shift register; gated to CS pin."+ },+ {+ "number": "4",+ "name": "VSS",+ "type": "power_in",+ "description": "Ground; voltage reference for digital and analog circuits (0 V)."+ },+ {+ "number": "5",+ "name": "PB1",+ "type": "passive",+ "description": "Potentiometer Terminal B for Pot 1; resistor terminal with voltage range 0 to VDD."+ },+ {+ "number": "6",+ "name": "PW1",+ "type": "passive",+ "description": "Wiper Connection for Pot 1; potentiometer wiper terminal with voltage range 0 to VDD."+ },+ {+ "number": "7",+ "name": "PA1",+ "type": "passive",+ "description": "Potentiometer Terminal A for Pot 1; resistor terminal with voltage range 0 to VDD."+ },+ {+ "number": "8",+ "name": "PA0",+ "type": "passive",+ "description": "Potentiometer Terminal A for Pot 0; resistor terminal with voltage range 0 to VDD."+ },+ {+ "number": "9",+ "name": "PW0",+ "type": "passive",+ "description": "Wiper Connection for Pot 0; potentiometer wiper terminal with voltage range 0 to VDD."+ },+ {+ "number": "10",+ "name": "PB0",+ "type": "passive",+ "description": "Potentiometer Terminal B for Pot 0; resistor terminal with voltage range 0 to VDD."+ },+ {+ "number": "11",+ "name": "RS",+ "type": "input",+ "description": "Reset Input; pulling low for minimum 150 ns sets all potentiometers to mid-scale (Code 80h); has active pull-up; do not leave floating."+ },+ {+ "number": "12",+ "name": "SHDN",+ "type": "input",+ "description": "Shutdown Input; Schmitt Trigger input that when pulled low places device in power-saving mode by open-circuiting A terminal and shorting B to W terminals; has active pull-up; do not leave floating."+ },+ {+ "number": "13",+ "name": "SO",+ "type": "output",+ "description": "Serial Data Output for daisy-chaining; push-pull output that clocks data out on falling edge of clock and drives low when CS is high."+ },+ {+ "number": "14",+ "name": "VDD",+ "type": "power_in",+ "description": "Power Supply; positive supply voltage 2.7 V to 5.5 V; bypass with 0.1 µF capacitor close to pin."+ }+ ],+ "provenance": {+ "extractor": "extract_pins 0.2",+ "factory_chain": {+ "factory": "2.0.0",+ "extractor": "extract_pins 0.2",+ "primary_model": "claude-haiku-4-5-20251001",+ "primary_mode": "text",+ "consensus_model": "claude-sonnet-4-6",+ "consensus": "agreed",+ "guards": "pin_guards 0.1: passed",+ "guard_notes": [],+ "pages_sent": 32,+ "cost_usd": 0.3346,+ "at": "2026-09-22T08:26:47"+ },+ "datasheet": {+ "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588884916817420288",+ "pages": 32,+ "sha256": "6bee8156c8b9f1f6",+ "source_tier": "lcsc"+ },+ "cad": "KiCad official (CC-BY-SA 4.0)",+ "pins": {+ "total": 14,+ "described": 14,+ "cites_pages": true,+ "refuses_to_fabricate": true+ }+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ }+ },+ "visibility": "public",+ "org": "adom",+ "author": {+ "name": "Ray",+ "email": "[email protected]"+ }+}