← Commit history
README.mdadded+44@@ -0,0 +1,44 @@+# MCP4131-104E++**Microchip Tech** · Digital Potentiometers · SOIC-8++MCP4131-104E from Microchip Tech, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | CS | input | SPI chip select input, high-voltage tolerant up to 12.5 V (VDD ≥ 4.5 V); forcing to VIL enables normal serial commands, forcing to VIHH enables high-voltage serial commands; internal smart pull-up holds pin at VIH when undriven. |+| 2 | SCK | input | SPI serial clock input, high-voltage tolerant; supports up to 10 MHz for VDD = 2.7 V to 5.5 V and up to 1 MHz for VDD = 1.8 V to 2.7 V; data is latched on the rising edge (Modes 0,0 and 1,1). |+| 3 | SDI/SDO | bidirectional | Multiplexed SPI serial data input/output (MCP41X1 only); operates as SDI (high-voltage tolerant input) during write/increment/decrement commands and switches to open-drain SDO output with internal pull-up after address/command bits are received during a read command; maximum read clock 250 kHz without external pull-up. |+| 4 | VSS | power_in | Device ground reference; maximum current out of VSS pin is 100 mA. |+| 5 | P0A | passive | Potentiometer 0 Terminal A; fixed full-scale end of the 100 kΩ (±20 %) resistor network corresponding to wiper code 0x80 (7-bit full-scale); voltage must be within VSS to VDD, maximum current ±2.5 mA; disconnectable via TCON register R0A bit. |+| 6 | P0W | passive | Potentiometer 0 Wiper terminal; adjustable tap of the 100 kΩ resistor network with 75 Ω typical wiper resistance (160 Ω max at VDD = 5.5 V, IW = 2.0 mA); voltage must be within VSS to VDD, maximum current ±2.5 mA; disconnectable via TCON register R0W bit. |+| 7 | P0B | passive | Potentiometer 0 Terminal B; fixed zero-scale end of the 100 kΩ resistor network corresponding to wiper code 0x00; voltage must be within VSS to VDD, maximum current ±2.5 mA; disconnectable via TCON register R0B bit. |+| 8 | VDD | power_in | Positive power supply input; specified operating range 2.7 V to 5.5 V (analog characteristics), 1.8 V to 2.7 V for serial interface only; maximum current into VDD pin is 100 mA. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Microchip Tech |+| Package | SOIC-8 |+| Category | Data Acquisition |+| Pins | 8 |++## CAD (KiCad official)++- Symbol: `MCP4131-104E`+- Footprint: `Package_SO:SOIC-8_3.9x4.9mm_P1.27mm`+- 3D model: SOIC-8 (KiCad packages3D, STEP)+- 3D model files: `mcp4131-104e-etched.step` / `mcp4131-104e-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `mcp4131-104e.step` / `mcp4131-104e.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Microchip Tech datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8590909973931515904) (88 pp, sha256 `6c60b083b2ef0a92`, retrieved 2026-09-22, tier: lcsc)+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.2`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-4-6` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/mcp4131-104e-datasheet.pdf)
page.jsonadded+141@@ -0,0 +1,141 @@+{+ "slug": "mcp4131-104e",+ "version": "0.1.0",+ "type": "component",+ "description": "Microchip Tech Digital Potentiometers, SOIC-8. Datasheet-verified pinout, KiCad symbol/footprint/3D.",+ "tags": [+ "component",+ "data acquisition",+ "mcp4131-104e",+ "factory-2.0.0",+ "extractor-text"+ ],+ "dependencies": {},+ "hero": {+ "type": "image",+ "path": "docs/hero.png"+ },+ "files": [+ "page.json",+ "README.md",+ "mcp4131-104e.kicad_sym",+ "mcp4131-104e.kicad_mod",+ "mcp4131-104e.glb",+ "mcp4131-104e.step",+ "mcp4131-104e.lbr",+ "docs/hero.png",+ "docs/mcp4131-104e-datasheet.pdf",+ "viewers/symbol.html",+ "viewers/footprint.html"+ ],+ "component": {+ "mpn": "MCP4131-104E",+ "manufacturer": "Microchip Tech",+ "package": "SOIC-8",+ "pin_count": 8,+ "category": "Data Acquisition",+ "subcategory": "Digital Potentiometers",+ "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8590909973931515904",+ "parts": {+ "symbol": "mcp4131-104e.kicad_sym",+ "footprint": "mcp4131-104e.kicad_mod",+ "model_3d": "mcp4131-104e-etched.glb",+ "model_3d_plain": "mcp4131-104e.glb",+ "model_3d_step": "mcp4131-104e-etched.step",+ "model_3d_step_plain": "mcp4131-104e.step",+ "lbr": "mcp4131-104e.lbr"+ },+ "distributor_links": {+ "lcsc": "C636034"+ },+ "pins": [+ {+ "number": "1",+ "name": "CS",+ "type": "input",+ "description": "SPI chip select input, high-voltage tolerant up to 12.5 V (VDD ≥ 4.5 V); forcing to VIL enables normal serial commands, forcing to VIHH enables high-voltage serial commands; internal smart pull-up holds pin at VIH when undriven."+ },+ {+ "number": "2",+ "name": "SCK",+ "type": "input",+ "description": "SPI serial clock input, high-voltage tolerant; supports up to 10 MHz for VDD = 2.7 V to 5.5 V and up to 1 MHz for VDD = 1.8 V to 2.7 V; data is latched on the rising edge (Modes 0,0 and 1,1)."+ },+ {+ "number": "3",+ "name": "SDI/SDO",+ "type": "bidirectional",+ "description": "Multiplexed SPI serial data input/output (MCP41X1 only); operates as SDI (high-voltage tolerant input) during write/increment/decrement commands and switches to open-drain SDO output with internal pull-up after address/command bits are received during a read command; maximum read clock 250 kHz without external pull-up."+ },+ {+ "number": "4",+ "name": "VSS",+ "type": "power_in",+ "description": "Device ground reference; maximum current out of VSS pin is 100 mA."+ },+ {+ "number": "5",+ "name": "P0A",+ "type": "passive",+ "description": "Potentiometer 0 Terminal A; fixed full-scale end of the 100 kΩ (±20 %) resistor network corresponding to wiper code 0x80 (7-bit full-scale); voltage must be within VSS to VDD, maximum current ±2.5 mA; disconnectable via TCON register R0A bit."+ },+ {+ "number": "6",+ "name": "P0W",+ "type": "passive",+ "description": "Potentiometer 0 Wiper terminal; adjustable tap of the 100 kΩ resistor network with 75 Ω typical wiper resistance (160 Ω max at VDD = 5.5 V, IW = 2.0 mA); voltage must be within VSS to VDD, maximum current ±2.5 mA; disconnectable via TCON register R0W bit."+ },+ {+ "number": "7",+ "name": "P0B",+ "type": "passive",+ "description": "Potentiometer 0 Terminal B; fixed zero-scale end of the 100 kΩ resistor network corresponding to wiper code 0x00; voltage must be within VSS to VDD, maximum current ±2.5 mA; disconnectable via TCON register R0B bit."+ },+ {+ "number": "8",+ "name": "VDD",+ "type": "power_in",+ "description": "Positive power supply input; specified operating range 2.7 V to 5.5 V (analog characteristics), 1.8 V to 2.7 V for serial interface only; maximum current into VDD pin is 100 mA."+ }+ ],+ "provenance": {+ "extractor": "extract_pins 0.2",+ "factory_chain": {+ "factory": "2.0.0",+ "extractor": "extract_pins 0.2",+ "primary_model": "claude-haiku-4-5-20251001",+ "primary_mode": "text",+ "consensus_model": "claude-sonnet-4-6",+ "consensus": "agreed",+ "guards": "pin_guards 0.1: passed",+ "guard_notes": [],+ "pages_sent": 88,+ "cost_usd": 0.5891,+ "at": "2026-09-22T00:20:00"+ },+ "datasheet": {+ "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8590909973931515904",+ "pages": 88,+ "sha256": "6c60b083b2ef0a92",+ "source_tier": "lcsc"+ },+ "cad": "KiCad official (CC-BY-SA 4.0)",+ "pins": {+ "total": 8,+ "described": 8,+ "cites_pages": true,+ "refuses_to_fabricate": true+ }+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ }+ },+ "visibility": "public",+ "org": "adom",+ "author": {+ "name": "Ray",+ "email": "[email protected]"+ }+}