MCP2562T-E/SN

@@ -0,0 +1,260 @@+{+  "spec": "adom-hero 1.4",+  "mpn": "MCP2562T-E/MF",+  "kind": "component + footprint reference art",+  "board_use": false,+  "plane_z_mm": -0.02,+  "units": "metre",+  "upAxis": "Z",+  "layers": {+    "pad_outlines": {+      "material": "Footprint pads - teal dashed outlines - 50 percent opacity",+      "rgba": [+        0.0,+        0.902,+        0.863,+        0.5+      ],+      "pads": 8,+      "span_mm": 6.9,+      "dash_mm": 0.1725,+      "gap_mm": 0.1035,+      "pad_stroke_mm": 0.0414+    },+    "silkscreen": {+      "material": "Silkscreen reference lines - 30 percent opacity",+      "rgba": [+        0.92,+        0.96,+        1.0,+        0.3+      ],+      "footprint_items": 7,+      "pin1": {+        "source": "footprint silkscreen",+        "pad": "1"+      }+    },+    "signal_names": {+      "material": "Signal names - 50 percent opacity",+      "rgba": [+        0.92,+        0.96,+        1.0,+        0.5+      ],+      "font": "DejaVu Sans Mono",+      "labels": 8,+      "sides": "top + mirrored underside (single-sided)",+      "fallback_to_pad_number": 0+    }+  },+  "align": {+    "ok": true,+    "centre_offset_mm": 0.0,+    "tolerance_mm": 0.552,+    "orientation_flipped": false,+    "contacts_bbox_mm": [+      -3.0,+      3.0,+      -2.11,+      2.11+    ],+    "pads_bbox_mm": [+      -3.45,+      3.45,+      -2.205,+      2.205+    ],+    "seating_z_mm": 0.0+  },+  "sources": {+    "glb": "mcp2562t-e.glb",+    "glb_sha256": "f10b15a10c98e84fd5223191d2bfb66554fa8950956609c321bb34628d5e18cd",+    "footprint": "mcp2562t-e.kicad_mod",+    "footprint_sha256": "074ecb2092b24fa4b4b9cdd7c926fc587b0d7d6d21e7341e57935fd42d36894f",+    "pins": "page.json component.pins",+    "pins_sha256": "7c7aee6776abfc77445ea48c2b16b7a458552a2024cb4168c4319857f8a06643"+  },+  "generator": "adom-wiki 1.8.23 (component_hero)",+  "labels": [+    {+      "pad": "1",+      "text": "TXD",+      "x": -3.6,+      "y": -1.905,+      "align": "right",+      "vertical": false,+      "h": 0.6+    },+    {+      "pad": "2",+      "text": "VSS",+      "x": -3.6,+      "y": -0.635,+      "align": "right",+      "vertical": false,+      "h": 0.6+    },+    {+      "pad": "3",+      "text": "VDD",+      "x": -3.6,+      "y": 0.635,+      "align": "right",+      "vertical": false,+      "h": 0.6+    },+    {+      "pad": "4",+      "text": "RXD",+      "x": -3.6,+      "y": 1.905,+      "align": "right",+      "vertical": false,+      "h": 0.6+    },+    {+      "pad": "5",+      "text": "VIO",+      "x": 3.6,+      "y": 1.905,+      "align": "left",+      "vertical": false,+      "h": 0.6+    },+    {+      "pad": "6",+      "text": "CANL",+      "x": 3.6,+      "y": 0.635,+      "align": "left",+      "vertical": false,+      "h": 0.6+    },+    {+      "pad": "7",+      "text": "CANH",+      "x": 3.6,+      "y": -0.635,+      "align": "left",+      "vertical": false,+      "h": 0.6+    },+    {+      "pad": "8",+      "text": "STBY",+      "x": 3.6,+      "y": -1.905,+      "align": "left",+      "vertical": false,+      "h": 0.6+    }+  ],+  "pads": [+    {+      "number": "1",+      "shape": "roundrect",+      "center_mm": [+        -2.475,+        -1.905+      ],+      "size_mm": [+        1.95,+        0.6+      ],+      "rot": 0.0+    },+    {+      "number": "2",+      "shape": "roundrect",+      "center_mm": [+        -2.475,+        -0.635+      ],+      "size_mm": [+        1.95,+        0.6+      ],+      "rot": 0.0+    },+    {+      "number": "3",+      "shape": "roundrect",+      "center_mm": [+        -2.475,+        0.635+      ],+      "size_mm": [+        1.95,+        0.6+      ],+      "rot": 0.0+    },+    {+      "number": "4",+      "shape": "roundrect",+      "center_mm": [+        -2.475,+        1.905+      ],+      "size_mm": [+        1.95,+        0.6+      ],+      "rot": 0.0+    },+    {+      "number": "5",+      "shape": "roundrect",+      "center_mm": [+        2.475,+        1.905+      ],+      "size_mm": [+        1.95,+        0.6+      ],+      "rot": 0.0+    },+    {+      "number": "6",+      "shape": "roundrect",+      "center_mm": [+        2.475,+        0.635+      ],+      "size_mm": [+        1.95,+        0.6+      ],+      "rot": 0.0+    },+    {+      "number": "7",+      "shape": "roundrect",+      "center_mm": [+        2.475,+        -0.635+      ],+      "size_mm": [+        1.95,+        0.6+      ],+      "rot": 0.0+    },+    {+      "number": "8",+      "shape": "roundrect",+      "center_mm": [+        2.475,+        -1.905+      ],+      "size_mm": [+        1.95,+        0.6+      ],+      "rot": 0.0+    }+  ]+}

@@ -1,6 +1,6 @@ {   "slug": "mcp2562t-e-mf",-  "version": "0.2.0",+  "version": "0.2.1",   "type": "component",   "description": "Microchip CAN Controllers, SOIC-8. Datasheet-verified pinout, KiCad symbol/footprint/3D.",   "tags": [@@ -20,11 +20,178 @@     "mcp2562t-e.kicad_mod",     "mcp2562t-e.glb",     "mcp2562t-e.step",+    "mcp2562t-e-etched.step",     "mcp2562t-e.lbr",     "docs/hero.png",     "docs/mcp2562t-e-datasheet.pdf",     "viewers/symbol.html",     "viewers/footprint.html",-    "pads.json"-  ]+    "pads.json",+    "mcp2562t-e-etched.glb",+    "mcp2562t-e-mf-hero.glb",+    "mcp2562t-e-mf-hero.overlay.json"+  ],+  "component": {+    "mpn": "MCP2562T-E/MF",+    "manufacturer": "Microchip",+    "package": "SOIC-8",+    "pin_count": 8,+    "category": "Interface",+    "subcategory": "CAN Controllers",+    "datasheet": "https://datasheet.lcsc.com/datasheet/pdf/0b957810d1fe4cbf9d9a26f9e89bbfbe.pdf",+    "parts": {+      "symbol": "mcp2562t-e.kicad_sym",+      "footprint": "mcp2562t-e.kicad_mod",+      "model_3d": "mcp2562t-e-mf-hero.glb",+      "model_3d_plain": "mcp2562t-e.glb",+      "model_3d_step": "mcp2562t-e-etched.step",+      "model_3d_step_plain": "mcp2562t-e.step",+      "lbr": "mcp2562t-e.lbr"+    },+    "distributor_links": {},+    "pins": [+      {+        "number": "1",+        "name": "TXD",+        "type": "input",+        "description": "Transmit Data Input from the CAN controller. Drives CANH/CANL differential outputs: TXD low = Dominant state, TXD high = Recessive. Internal pull-up (nominal 33 kΩ) to VIO on the MCP2562."+      },+      {+        "number": "2",+        "name": "VSS",+        "type": "power_in",+        "description": "Ground supply pin. Common reference for VDD (4.5-5.5V) and VIO (1.8-5.5V) supplies."+      },+      {+        "number": "3",+        "name": "VDD",+        "type": "power_in",+        "description": "Positive supply voltage (4.5V to 5.5V). Supplies the transmitter and receiver, including the wake-up receiver. POR/UVLO monitored (VPORH ~3.8-4.3V)."+      },+      {+        "number": "4",+        "name": "RXD",+        "type": "output",+        "description": "Receive Data Output. CMOS output reflecting the CAN bus differential state: High = Recessive, Low = Dominant. Supplied from VIO on the MCP2562 (allows direct connection to low-voltage MCU I/O)."+      },+      {+        "number": "5",+        "name": "VIO",+        "type": "power_in",+        "description": "Digital I/O supply pin (1.8V to 5.5V) - MCP2562 only. Powers the TXD, RXD, and STBY pin circuitry so they interface directly to a low-voltage microcontroller without external level shifters. Requires 0.1 µF decoupling."+      },+      {+        "number": "6",+        "name": "CANL",+        "type": "bidirectional",+        "description": "CAN Low-level bus I/O. Drives the low side of the CAN differential bus and is tied internally to the receive comparator. Withstands -58V to +58V DC and -150V/+100V ISO-7637 transients; disconnects (high-Z) when the device is unpowered."+      },+      {+        "number": "7",+        "name": "CANH",+        "type": "bidirectional",+        "description": "CAN High-level bus I/O. Drives the high side of the CAN differential bus and is tied internally to the receive comparator. Withstands -58V to +58V DC and -150V/+100V ISO-7637 transients; disconnects (high-Z) when the device is unpowered."+      },+      {+        "number": "8",+        "name": "STBY",+        "type": "input",+        "description": "Standby mode input. Low = Normal mode (transmitter and high-speed receiver active); High = Standby (transmitter and high-speed receiver off, only low-power wake-up receiver active). Internal MOS pull-up to VIO (typ 660 kΩ @ 5V, 1.1 MΩ @ 3.3V, 4.4 MΩ @ 1.8V)."+      }+    ],+    "provenance": {+      "extractor": "ds2sf",+      "datasheet": {+        "url": "https://datasheet.lcsc.com/datasheet/pdf/0b957810d1fe4cbf9d9a26f9e89bbfbe.pdf",+        "pages": 30,+        "sha256": "c36b24e45446d8a1",+        "source_tier": "mfr"+      },+      "cad": "KiCad official (CC-BY-SA 4.0)",+      "pins": {+        "total": 8,+        "described": 8,+        "cites_pages": true,+        "refuses_to_fabricate": true+      }+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    },+    "pin1": {+      "pad": "1",+      "at": [+        -2.475,+        -1.905+      ],+      "corner": "top-left",+      "source": "silk-marker",+      "derived_from": "SOIC-8_3.9x4.9mm_P1.27mm@sha256:074ecb2092b24fa4",+      "mark": "drawn"+    },+    "models_3d": [+      {+        "file": "mcp2562t-e.step",+        "role": "plain",+        "up": "Z",+        "units": "mm",+        "origin": "footprint origin = pad-pattern centre",+        "seat": "z = 0",+        "extents_mm": [+          6,+          4.9,+          1.75+        ],+        "zmin_mm": 0,+        "centre_offset_mm": 0,+        "footprint_binding": "identity",+        "sha256": "07f46cff378d30e6c27dfd5a03092c795323f86d91c71fc7e743f4f418dc553a",+        "checked": "2026-10-07",+        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+      },+      {+        "file": "mcp2562t-e-etched.step",+        "role": "eda",+        "up": "Z",+        "units": "mm",+        "origin": "footprint origin = pad-pattern centre",+        "seat": "z = 0",+        "extents_mm": [+          6,+          4.9,+          1.75+        ],+        "zmin_mm": 0,+        "centre_offset_mm": 0,+        "footprint_binding": "identity",+        "sha256": "ae660f12d8da77ebfeb2aafd713afb793363ad3904a89829bec2e6cffda100ed",+        "checked": "2026-10-07",+        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+      }+    ],+    "family": {+      "base": "MCP2562T-E",+      "siblings": [+        "MCP2562T-E/SN"+      ],+      "old_slug": "mcp2562t-e",+      "note": "renamed from the cut-base slug to the part it was built from (slug collision split, 2026-11-11)"+    }+  },+  "title": "MCP2562T-E/MF",+  "brief": "Microchip CAN Controllers, SOIC-8. Pinout extracted from the datasheet, KiCad symbol/footprint/3D.",+  "metadata": {+    "specs": {+      "Manufacturer": "Microchip",+      "Package": "SOIC-8",+      "Category": "Interface",+      "Pins": "8"+    }+  },+  "discovery_triggers": [+    "mcp2562t-e"+  ],+  "discovery_pitch": "MCP2562T-E (Microchip) component page with datasheet-verified CAD.",+  "visibility": "public" }