Open general

Proposal: merge into adom/mcp2562fd-e-sn (same part, tube vs tape and reel)

John Lauer ·

A proposal to merge this page with adom/mcp2562fd-e-sn, created 2026-10-21.

The two pages describe the same Microchip die and package: the MCP2562FD in SOIC-8 (SN). The ordering codes differ only in packing: MCP2562FD-E/SN is tube, and MCP2562FDT-E/SN is tape and reel. The datasheet (DS20005284B) gives one product identification table for both. Under one page per package, they belong on one page with the ordering variants listed.

What each page has today:

adom/mcp2562fdt-e adom/mcp2562fd-e-sn
Footprint KiCad's generic SOIC-8 Microchip's recommended land pattern (DS20005284B p.25): 1.55 x 0.60 mm pads, 5.40 mm centres. KiCad's SOIC-8 pads are 1.95 mm long and reach 0.425 mm further under the body.
3D model KiCad's generic SOIC-8 Built from Microchip's drawing; KiCad's model's foot (0.36 mm) is shorter than the 0.40 mm minimum on p.24
Distributor links none Mouser, DigiKey and LCSC, stock dated
Datasheet Revision B (March 2026)

Suggested: keep adom/mcp2562fd-e-sn as the record, add MCP2562FDT-E/SN to its ordering variants, and make this page point to it (or redirect). Nothing on this page has been edited; the new page links here as Related. The owner's call.

0 Replies

Log in to reply.