← Commit history

Set visibility: public

Ray ·a7ac10a180 · ·parent 3b631c5
1 file changed +8−5
page.json+8−5
@@ -32,7 +32,7 @@         "number": "1",         "name": "TXD",         "type": "input",-        "description": "Transmit Data Input from the CAN controller. Drives the differential CANH/CANL output pins: low = Dominant, high = Recessive. Internally pulled up (nominal 33 k\u03a9) to VIO."+        "description": "Transmit Data Input from the CAN controller. Drives the differential CANH/CANL output pins: low = Dominant, high = Recessive. Internally pulled up (nominal 33 kΩ) to VIO."       },       {         "number": "2",@@ -62,19 +62,19 @@         "number": "6",         "name": "CANL",         "type": "bidirectional",-        "description": "CAN bus low-level differential I/O. Driven low during Dominant state; disconnected (high-Z) when the device is unpowered. Protected against \u00b114 kV ESD (IEC 61000-4-2) and bus short-circuit faults."+        "description": "CAN bus low-level differential I/O. Driven low during Dominant state; disconnected (high-Z) when the device is unpowered. Protected against ±14 kV ESD (IEC 61000-4-2) and bus short-circuit faults."       },       {         "number": "7",         "name": "CANH",         "type": "bidirectional",-        "description": "CAN bus high-level differential I/O. Driven high during Dominant state; disconnected (high-Z) when the device is unpowered. Protected against \u00b114 kV ESD (IEC 61000-4-2) and bus short-circuit faults."+        "description": "CAN bus high-level differential I/O. Driven high during Dominant state; disconnected (high-Z) when the device is unpowered. Protected against ±14 kV ESD (IEC 61000-4-2) and bus short-circuit faults."       },       {         "number": "8",         "name": "STBY",         "type": "input",-        "description": "Standby mode select input. Low = Normal mode (transmitter and high-speed receiver active); high = Standby mode (transmitter off, low-power wake-up receiver active). Internal MOS pull-up to VIO (typ. 660 k\u03a9 at 5 V, 1.1 M\u03a9 at 3.3 V, 4.4 M\u03a9 at 1.8 V)."+        "description": "Standby mode select input. Low = Normal mode (transmitter and high-speed receiver active); high = Standby mode (transmitter off, low-power wake-up receiver active). Internal MOS pull-up to VIO (typ. 660 kΩ at 5 V, 1.1 MΩ at 3.3 V, 4.4 MΩ at 1.8 V)."       }     ],     "provenance": {@@ -138,5 +138,8 @@     "docs/mcp2562fdt-e-datasheet.pdf",     "viewers/symbol.html",     "viewers/footprint.html"-  ]+  ],+  "visibility": {+    "public": true+  } }\ No newline at end of file