MCP2561T-E

@@ -44,7 +44,7 @@         "number": "3",         "name": "VDD",         "type": "power_in",-        "description": "Positive supply input, nominally 5 V. Decouple with a 0.1 \u00b5F ceramic capacitor to VSS placed close to the pin."+        "description": "Positive supply input, nominally 5 V. Decouple with a 0.1 µF ceramic capacitor to VSS placed close to the pin."       },       {         "number": "4",@@ -56,25 +56,25 @@         "number": "5",         "name": "SPLIT",         "type": "output",-        "description": "Common-mode stabilization output for split-termination networks (nominally VDD/2). Tied to the midpoint of two 60 \u03a9 termination resistors (with a small filter capacitor to VSS) to reduce common-mode emissions on the CAN bus. May be left unconnected if a standard single 120 \u03a9 termination is used."+        "description": "Common-mode stabilization output for split-termination networks (nominally VDD/2). Tied to the midpoint of two 60 Ω termination resistors (with a small filter capacitor to VSS) to reduce common-mode emissions on the CAN bus. May be left unconnected if a standard single 120 Ω termination is used."       },       {         "number": "6",         "name": "CANL",         "type": "bidirectional",-        "description": "CAN bus low-side differential I/O. Driven low in the dominant state and biased to VDD/2 in the recessive state. Withstands \u00b158 V bus faults (ISO 11898-5)."+        "description": "CAN bus low-side differential I/O. Driven low in the dominant state and biased to VDD/2 in the recessive state. Withstands ±58 V bus faults (ISO 11898-5)."       },       {         "number": "7",         "name": "CANH",         "type": "bidirectional",-        "description": "CAN bus high-side differential I/O. Driven high in the dominant state and biased to VDD/2 in the recessive state. Withstands \u00b158 V bus faults (ISO 11898-5)."+        "description": "CAN bus high-side differential I/O. Driven high in the dominant state and biased to VDD/2 in the recessive state. Withstands ±58 V bus faults (ISO 11898-5)."       },       {         "number": "8",         "name": "STBY",         "type": "input",-        "description": "Standby mode control input. Normal Operation when VIL < 0.3 VDD (tie low or drive low); Standby (low-power) mode when VIH > 0.7 VDD (float, pull up, or drive high). Includes an internal worst-case pull-up of ~500 k\u03a9, so any external pull-down resistor must be < 100 k\u03a9 to guarantee VIL."+        "description": "Standby mode control input. Normal Operation when VIL < 0.3 VDD (tie low or drive low); Standby (low-power) mode when VIH > 0.7 VDD (float, pull up, or drive high). Includes an internal worst-case pull-up of ~500 kΩ, so any external pull-down resistor must be < 100 kΩ to guarantee VIL."       }     ],     "provenance": {@@ -138,5 +138,8 @@     "docs/mcp2561t-e-datasheet.pdf",     "viewers/symbol.html",     "viewers/footprint.html"-  ]+  ],+  "visibility": {+    "public": true+  } }\ No newline at end of file