← Commit history

mcp251863t-e: factory component page (tier=lcsc)

Ray ·d92df7b97a · ·parent b0a54b9
3 files changed +68−65
README.md+30−30
@@ -8,34 +8,34 @@ MCP251863T-E from Microchip, in a SSOP-28-208mil. Pinout and pin descriptions ex  | Pin | Name | Type | Function | |---|---|---|---|-| 1 | VIO | power_in | Transceiver digital I/O supply. Sets the logic level for the digital I/O pins interfacing to the host MCU (TXD, RXD, STBY). |-| 2 | NC | unconnected | No connect. Leave floating or tie as recommended by design guidelines. |-| 3 | CANL | bidirectional | CAN bus low-level voltage I/O. Differential CAN bus line (low). Short-circuit and overtemperature protected. |-| 4 | CANH | bidirectional | CAN bus high-level voltage I/O. Differential CAN bus line (high). Short-circuit and overtemperature protected. |-| 5 | STBY | input | Transceiver standby mode control input. Drive high to place the transceiver into low-power standby mode; drive low for normal operation. |-| 6 | nINT1/GPIO1 | bidirectional | Configurable interrupt output (active-low) or general-purpose I/O pin. Function selected via controller registers. |-| 7 | nINT0/GPIO0/XSTBY | bidirectional | Configurable interrupt output (active-low), general-purpose I/O, or transceiver standby control (XSTBY) pin. Function selected via controller registers. |-| 8 | NC | unconnected | No connect. |-| 9 | SCK | input | SPI clock input from host MCU. Supports SPI clock up to 20 MHz in modes (0,0) and (1,1). |-| 10 | SDI | input | SPI data input (MOSI) from the host MCU. |-| 11 | SDO | output | SPI data output (MISO) to the host MCU. |-| 12 | NC | unconnected | No connect. |-| 13 | nCS | input | SPI chip-select input (active-low) from the host MCU. |-| 14 | VDD | power_in | Controller positive supply. Operating range 2.7 V to 5.5 V. Feeds the internal LDO / POR of the CAN FD controller die. |-| 15 | TXCAN | output | Transmit output of the internal CAN FD controller (routed internally to the transceiver TXD). |-| 16 | RXCAN | input | Receive input of the internal CAN FD controller (routed internally from the transceiver RXD). |-| 17 | NC | unconnected | No connect. |-| 18 | CLKO/SOF | output | Clock output / Start-of-Frame (test) output. Configurable as CAN clock output with prescaler or as SOF indicator. |-| 19 | nINT | output | Main interrupt output (active-low) from the CAN FD controller. Can be configured as push/pull or open-drain. |-| 20 | OSC2 | output | External crystal/resonator output. Connect to one terminal of a 40/20/4 MHz crystal or ceramic resonator (or leave open when using external clock on OSC1). |-| 21 | OSC1 | input | External crystal/resonator input, or external clock input. Supports 40, 20 or 4 MHz crystal/ceramic resonator or external clock. |-| 22 | VSS | power_in | Controller ground reference. |-| 23 | TXD | input | Transceiver transmit data input (internally driven from TXCAN in this integrated device). Includes TXD dominant time-out protection. |-| 24 | GND | power_in | Transceiver ground reference. |-| 25 | VCC | power_in | Transceiver positive supply (typically 5 V nominal for CAN transceiver operation). Undervoltage protected. |-| 26 | NC | unconnected | No connect. |-| 27 | NC | unconnected | No connect. |-| 28 | RXD | output | Transceiver receive data output (internally routed to RXCAN in this integrated device). Includes recessive clamping detection. |+| 1 | VIO | power_in | Transceiver digital I/O supply. Sets the logic reference level for digital pins. |+| 2 | NC | unconnected | No Connect. Leave unconnected. |+| 3 | CANL | bidirectional | CAN bus Low-Level voltage line. Differential transceiver I/O. |+| 4 | CANH | bidirectional | CAN bus High-Level voltage line. Differential transceiver I/O. |+| 5 | STBY | input | Transceiver Standby Mode control input. Drive high to place the transceiver in low-power standby. |+| 6 | nINT1/GPIO1 | bidirectional | Configurable pin: active-low Interrupt output 1, or general-purpose I/O (GPIO1). Push-pull or open-drain selectable. |+| 7 | nINT0/GPIO0/XSTBY | bidirectional | Configurable pin: active-low Interrupt output 0, general-purpose I/O (GPIO0), or transceiver standby control (XSTBY) driving the on-die STBY of the transceiver. |+| 8 | NC | unconnected | No Connect. Leave unconnected. |+| 9 | SCK | input | SPI clock input from host MCU. Up to 20 MHz. |+| 10 | SDI | input | SPI serial data input (MOSI). |+| 11 | SDO | output | SPI serial data output (MISO). |+| 12 | NC | unconnected | No Connect. Leave unconnected. |+| 13 | nCS | input | Active-low SPI chip-select input from host MCU. |+| 14 | VDD | power_in | CAN FD controller positive supply. 2.7 V to 5.5 V. |+| 15 | TXCAN | output | CAN FD Controller transmit output. Connect to TXD of the transceiver (internal wiring within this package pairs 15↔23). |+| 16 | RXCAN | input | CAN FD Controller receive input. Connect to RXD of the transceiver (internal wiring within this package pairs 16↔28). |+| 17 | NC | unconnected | No Connect. Leave unconnected. |+| 18 | CLKO/SOF | output | Clock output with prescaler, or Start-Of-Frame test output selectable via configuration. |+| 19 | nINT | output | Active-low interrupt output from the CAN FD Controller. Push-pull or open-drain configurable. |+| 20 | OSC2 | output | External oscillator output. Connect to one terminal of the crystal/resonator (4, 20 or 40 MHz). |+| 21 | OSC1 | input | External oscillator input or external clock input. Connect to the other crystal terminal or an external clock source. |+| 22 | VSS | power_in | Controller ground return. |+| 23 | TXD | input | Transceiver transmit data input. Connect to TXCAN of the controller (pin 15). |+| 24 | GND | power_in | Transceiver ground return. |+| 25 | VCC | power_in | Transceiver positive supply (typ. 5 V for standard CAN transceiver operation). |+| 26 | NC | unconnected | No Connect. Leave unconnected. |+| 27 | NC | unconnected | No Connect. Leave unconnected. |+| 28 | RXD | output | Transceiver receive data output. Connect to RXCAN of the controller (pin 16). |  ## Key specifications @@ -48,8 +48,8 @@ MCP251863T-E from Microchip, in a SSOP-28-208mil. Pinout and pin descriptions ex  ## Ordering variants -- `MCP251863T-E/SS`-- `MCP251863T-EMCP251863-E/SS`+- `MCP251863T-EE/SS`+- `MCP251863T-ET-E/SS`  ## CAD (KiCad official) 
mcp251863t-e.lbr+9−3
@@ -50,7 +50,7 @@ <layer number="98" name="Guide" color="6" fill="1" visible="yes" active="yes"/> </layers> <library>-<description></description>+<description>Microchip CAN ICs, SSOP-28-208mil</description> <packages> <package name="SSOP-28_5.3x10.2mm_P0.65mm">   <description>SSOP-28, 5.3 x 10.2 mm, 0.65 mm pitch</description>@@ -106,6 +106,7 @@ </packages> <symbols> <symbol name="MCP251863T-E">+  <description>Microchip CAN ICs, SSOP-28-208mil</description>   <wire x1="-12.7" y1="17.78" x2="12.7" y2="17.78" width="0.254" layer="94"/>   <wire x1="12.7" y1="17.78" x2="12.7" y2="-20.32" width="0.254" layer="94"/>   <wire x1="12.7" y1="-20.32" x2="-12.7" y2="-20.32" width="0.254" layer="94"/>@@ -144,7 +145,7 @@ </symbols> <devicesets> <deviceset name="MCP251863T-E" prefix="U">-  <description></description>+  <description>Microchip CAN ICs, SSOP-28-208mil</description>   <gates>     <gate name="G$1" symbol="MCP251863T-E" x="0" y="0"/>   </gates>@@ -180,7 +181,12 @@         <connect gate="G$1" pin="RXCAN" pad="16"/>         <connect gate="G$1" pin="TXCAN" pad="15"/>       </connects>-      <technologies><technology name=""/></technologies>+      <technologies>+        <technology name="">+          <attribute name="MPN" value="MCP251863T-E" constant="no"/>+          <attribute name="MANUFACTURER" value="Microchip" constant="no"/>+        </technology>+      </technologies>     </device>   </devices> </deviceset>
page.json+29−32
@@ -32,169 +32,169 @@         "number": "1",         "name": "VIO",         "type": "power_in",-        "description": "Transceiver digital I/O supply. Sets the logic level for the digital I/O pins interfacing to the host MCU (TXD, RXD, STBY)."+        "description": "Transceiver digital I/O supply. Sets the logic reference level for digital pins."       },       {         "number": "2",         "name": "NC",         "type": "unconnected",-        "description": "No connect. Leave floating or tie as recommended by design guidelines."+        "description": "No Connect. Leave unconnected."       },       {         "number": "3",         "name": "CANL",         "type": "bidirectional",-        "description": "CAN bus low-level voltage I/O. Differential CAN bus line (low). Short-circuit and overtemperature protected."+        "description": "CAN bus Low-Level voltage line. Differential transceiver I/O."       },       {         "number": "4",         "name": "CANH",         "type": "bidirectional",-        "description": "CAN bus high-level voltage I/O. Differential CAN bus line (high). Short-circuit and overtemperature protected."+        "description": "CAN bus High-Level voltage line. Differential transceiver I/O."       },       {         "number": "5",         "name": "STBY",         "type": "input",-        "description": "Transceiver standby mode control input. Drive high to place the transceiver into low-power standby mode; drive low for normal operation."+        "description": "Transceiver Standby Mode control input. Drive high to place the transceiver in low-power standby."       },       {         "number": "6",         "name": "nINT1/GPIO1",         "type": "bidirectional",-        "description": "Configurable interrupt output (active-low) or general-purpose I/O pin. Function selected via controller registers."+        "description": "Configurable pin: active-low Interrupt output 1, or general-purpose I/O (GPIO1). Push-pull or open-drain selectable."       },       {         "number": "7",         "name": "nINT0/GPIO0/XSTBY",         "type": "bidirectional",-        "description": "Configurable interrupt output (active-low), general-purpose I/O, or transceiver standby control (XSTBY) pin. Function selected via controller registers."+        "description": "Configurable pin: active-low Interrupt output 0, general-purpose I/O (GPIO0), or transceiver standby control (XSTBY) driving the on-die STBY of the transceiver."       },       {         "number": "8",         "name": "NC",         "type": "unconnected",-        "description": "No connect."+        "description": "No Connect. Leave unconnected."       },       {         "number": "9",         "name": "SCK",         "type": "input",-        "description": "SPI clock input from host MCU. Supports SPI clock up to 20 MHz in modes (0,0) and (1,1)."+        "description": "SPI clock input from host MCU. Up to 20 MHz."       },       {         "number": "10",         "name": "SDI",         "type": "input",-        "description": "SPI data input (MOSI) from the host MCU."+        "description": "SPI serial data input (MOSI)."       },       {         "number": "11",         "name": "SDO",         "type": "output",-        "description": "SPI data output (MISO) to the host MCU."+        "description": "SPI serial data output (MISO)."       },       {         "number": "12",         "name": "NC",         "type": "unconnected",-        "description": "No connect."+        "description": "No Connect. Leave unconnected."       },       {         "number": "13",         "name": "nCS",         "type": "input",-        "description": "SPI chip-select input (active-low) from the host MCU."+        "description": "Active-low SPI chip-select input from host MCU."       },       {         "number": "14",         "name": "VDD",         "type": "power_in",-        "description": "Controller positive supply. Operating range 2.7 V to 5.5 V. Feeds the internal LDO / POR of the CAN FD controller die."+        "description": "CAN FD controller positive supply. 2.7 V to 5.5 V."       },       {         "number": "15",         "name": "TXCAN",         "type": "output",-        "description": "Transmit output of the internal CAN FD controller (routed internally to the transceiver TXD)."+        "description": "CAN FD Controller transmit output. Connect to TXD of the transceiver (internal wiring within this package pairs 15\u219423)."       },       {         "number": "16",         "name": "RXCAN",         "type": "input",-        "description": "Receive input of the internal CAN FD controller (routed internally from the transceiver RXD)."+        "description": "CAN FD Controller receive input. Connect to RXD of the transceiver (internal wiring within this package pairs 16\u219428)."       },       {         "number": "17",         "name": "NC",         "type": "unconnected",-        "description": "No connect."+        "description": "No Connect. Leave unconnected."       },       {         "number": "18",         "name": "CLKO/SOF",         "type": "output",-        "description": "Clock output / Start-of-Frame (test) output. Configurable as CAN clock output with prescaler or as SOF indicator."+        "description": "Clock output with prescaler, or Start-Of-Frame test output selectable via configuration."       },       {         "number": "19",         "name": "nINT",         "type": "output",-        "description": "Main interrupt output (active-low) from the CAN FD controller. Can be configured as push/pull or open-drain."+        "description": "Active-low interrupt output from the CAN FD Controller. Push-pull or open-drain configurable."       },       {         "number": "20",         "name": "OSC2",         "type": "output",-        "description": "External crystal/resonator output. Connect to one terminal of a 40/20/4 MHz crystal or ceramic resonator (or leave open when using external clock on OSC1)."+        "description": "External oscillator output. Connect to one terminal of the crystal/resonator (4, 20 or 40 MHz)."       },       {         "number": "21",         "name": "OSC1",         "type": "input",-        "description": "External crystal/resonator input, or external clock input. Supports 40, 20 or 4 MHz crystal/ceramic resonator or external clock."+        "description": "External oscillator input or external clock input. Connect to the other crystal terminal or an external clock source."       },       {         "number": "22",         "name": "VSS",         "type": "power_in",-        "description": "Controller ground reference."+        "description": "Controller ground return."       },       {         "number": "23",         "name": "TXD",         "type": "input",-        "description": "Transceiver transmit data input (internally driven from TXCAN in this integrated device). Includes TXD dominant time-out protection."+        "description": "Transceiver transmit data input. Connect to TXCAN of the controller (pin 15)."       },       {         "number": "24",         "name": "GND",         "type": "power_in",-        "description": "Transceiver ground reference."+        "description": "Transceiver ground return."       },       {         "number": "25",         "name": "VCC",         "type": "power_in",-        "description": "Transceiver positive supply (typically 5 V nominal for CAN transceiver operation). Undervoltage protected."+        "description": "Transceiver positive supply (typ. 5 V for standard CAN transceiver operation)."       },       {         "number": "26",         "name": "NC",         "type": "unconnected",-        "description": "No connect."+        "description": "No Connect. Leave unconnected."       },       {         "number": "27",         "name": "NC",         "type": "unconnected",-        "description": "No connect."+        "description": "No Connect. Leave unconnected."       },       {         "number": "28",         "name": "RXD",         "type": "output",-        "description": "Transceiver receive data output (internally routed to RXCAN in this integrated device). Includes recessive clamping detection."+        "description": "Transceiver receive data output. Connect to RXCAN of the controller (pin 16)."       }     ],     "provenance": {@@ -258,8 +258,5 @@     "docs/mcp251863t-e-datasheet.pdf",     "viewers/symbol.html",     "viewers/footprint.html"-  ],-  "visibility": {-    "public": true-  }+  ] }\ No newline at end of file