← Commit history

mcp251863t-e: factory component page (tier=lcsc)

Ray ·cb6fe50300 · ·parent 5bef49e
1 file changed +236−8
page.json+236−8
@@ -1,13 +1,246 @@ {+  "schema_version": 1,+  "type": "component",   "slug": "mcp251863t-e",+  "title": "MCP251863T-E",+  "brief": "Microchip CAN ICs, SSOP-28-208mil. Datasheet-verified pinout, KiCad symbol/footprint/3D.",   "version": "0.1.0",-  "type": "component",-  "description": "Microchip CAN ICs, SSOP-28-208mil. Datasheet-verified pinout, KiCad symbol/footprint/3D.",+  "license": "CC-BY-SA-4.0",   "tags": [     "component",     "comm-uart",     "mcp251863t-e"   ],+  "component": {+    "mpn": "MCP251863T-E",+    "manufacturer": "Microchip",+    "package": "SSOP-28-208mil",+    "pin_count": 28,+    "category": "Comm/UART",+    "subcategory": "CAN ICs",+    "datasheet": "https://wmsc.lcsc.com/wmsc/upload/file/pdf/v2/lcsc/2211080430_Microchip-Tech-MCP251863T-E-SS_C5226885.pdf",+    "parts": {+      "symbol": "mcp251863t-e.kicad_sym",+      "footprint": "mcp251863t-e.kicad_mod",+      "model_3d": "mcp251863t-e.glb",+      "model_3d_step": "mcp251863t-e.step",+      "lbr": "mcp251863t-e.lbr"+    },+    "distributor_links": {},+    "pins": [+      {+        "number": "1",+        "name": "VIO",+        "type": "power_in",+        "description": "Transceiver digital I/O supply. Sets the logic level for the digital I/O pins interfacing to the host MCU (TXD, RXD, STBY)."+      },+      {+        "number": "2",+        "name": "NC",+        "type": "unconnected",+        "description": "No connect. Leave floating or tie as recommended by design guidelines."+      },+      {+        "number": "3",+        "name": "CANL",+        "type": "bidirectional",+        "description": "CAN bus low-level voltage I/O. Differential CAN bus line (low). Short-circuit and overtemperature protected."+      },+      {+        "number": "4",+        "name": "CANH",+        "type": "bidirectional",+        "description": "CAN bus high-level voltage I/O. Differential CAN bus line (high). Short-circuit and overtemperature protected."+      },+      {+        "number": "5",+        "name": "STBY",+        "type": "input",+        "description": "Transceiver standby mode control input. Drive high to place the transceiver into low-power standby mode; drive low for normal operation."+      },+      {+        "number": "6",+        "name": "nINT1/GPIO1",+        "type": "bidirectional",+        "description": "Configurable interrupt output (active-low) or general-purpose I/O pin. Function selected via controller registers."+      },+      {+        "number": "7",+        "name": "nINT0/GPIO0/XSTBY",+        "type": "bidirectional",+        "description": "Configurable interrupt output (active-low), general-purpose I/O, or transceiver standby control (XSTBY) pin. Function selected via controller registers."+      },+      {+        "number": "8",+        "name": "NC",+        "type": "unconnected",+        "description": "No connect."+      },+      {+        "number": "9",+        "name": "SCK",+        "type": "input",+        "description": "SPI clock input from host MCU. Supports SPI clock up to 20 MHz in modes (0,0) and (1,1)."+      },+      {+        "number": "10",+        "name": "SDI",+        "type": "input",+        "description": "SPI data input (MOSI) from the host MCU."+      },+      {+        "number": "11",+        "name": "SDO",+        "type": "output",+        "description": "SPI data output (MISO) to the host MCU."+      },+      {+        "number": "12",+        "name": "NC",+        "type": "unconnected",+        "description": "No connect."+      },+      {+        "number": "13",+        "name": "nCS",+        "type": "input",+        "description": "SPI chip-select input (active-low) from the host MCU."+      },+      {+        "number": "14",+        "name": "VDD",+        "type": "power_in",+        "description": "Controller positive supply. Operating range 2.7 V to 5.5 V. Feeds the internal LDO / POR of the CAN FD controller die."+      },+      {+        "number": "15",+        "name": "TXCAN",+        "type": "output",+        "description": "Transmit output of the internal CAN FD controller (routed internally to the transceiver TXD)."+      },+      {+        "number": "16",+        "name": "RXCAN",+        "type": "input",+        "description": "Receive input of the internal CAN FD controller (routed internally from the transceiver RXD)."+      },+      {+        "number": "17",+        "name": "NC",+        "type": "unconnected",+        "description": "No connect."+      },+      {+        "number": "18",+        "name": "CLKO/SOF",+        "type": "output",+        "description": "Clock output / Start-of-Frame (test) output. Configurable as CAN clock output with prescaler or as SOF indicator."+      },+      {+        "number": "19",+        "name": "nINT",+        "type": "output",+        "description": "Main interrupt output (active-low) from the CAN FD controller. Can be configured as push/pull or open-drain."+      },+      {+        "number": "20",+        "name": "OSC2",+        "type": "output",+        "description": "External crystal/resonator output. Connect to one terminal of a 40/20/4 MHz crystal or ceramic resonator (or leave open when using external clock on OSC1)."+      },+      {+        "number": "21",+        "name": "OSC1",+        "type": "input",+        "description": "External crystal/resonator input, or external clock input. Supports 40, 20 or 4 MHz crystal/ceramic resonator or external clock."+      },+      {+        "number": "22",+        "name": "VSS",+        "type": "power_in",+        "description": "Controller ground reference."+      },+      {+        "number": "23",+        "name": "TXD",+        "type": "input",+        "description": "Transceiver transmit data input (internally driven from TXCAN in this integrated device). Includes TXD dominant time-out protection."+      },+      {+        "number": "24",+        "name": "GND",+        "type": "power_in",+        "description": "Transceiver ground reference."+      },+      {+        "number": "25",+        "name": "VCC",+        "type": "power_in",+        "description": "Transceiver positive supply (typically 5 V nominal for CAN transceiver operation). Undervoltage protected."+      },+      {+        "number": "26",+        "name": "NC",+        "type": "unconnected",+        "description": "No connect."+      },+      {+        "number": "27",+        "name": "NC",+        "type": "unconnected",+        "description": "No connect."+      },+      {+        "number": "28",+        "name": "RXD",+        "type": "output",+        "description": "Transceiver receive data output (internally routed to RXCAN in this integrated device). Includes recessive clamping detection."+      }+    ],+    "provenance": {+      "extractor": "ds2sf",+      "datasheet": {+        "url": "https://wmsc.lcsc.com/wmsc/upload/file/pdf/v2/lcsc/2211080430_Microchip-Tech-MCP251863T-E-SS_C5226885.pdf",+        "pages": 106,+        "sha256": "88a35dc5bc412ca2",+        "source_tier": "lcsc"+      },+      "cad": "KiCad official (CC-BY-SA 4.0)",+      "pins": {+        "total": 28,+        "described": 28,+        "cites_pages": true,+        "refuses_to_fabricate": true+      }+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    }+  },+  "metadata": {+    "specs": {+      "Manufacturer": "Microchip",+      "Package": "SSOP-28-208mil",+      "Category": "Comm/UART",+      "Pins": "28"+    }+  },+  "sections": [+    "hero",+    "viewers",+    "readme",+    "breadcrumbs",+    "info"+  ],+  "discovery_triggers": [+    "mcp251863t-e"+  ],+  "discovery_pitch": "MCP251863T-E (Microchip) component page with datasheet-verified CAD.",+  "author": {+    "name": "Ray",+    "email": "[email protected]"+  },   "dependencies": {},   "hero": {     "type": "image",@@ -25,10 +258,5 @@     "docs/mcp251863t-e-datasheet.pdf",     "viewers/symbol.html",     "viewers/footprint.html"-  ],-  "visibility": "public",-  "author": {-    "name": "Ray",-    "email": "[email protected]"-  }+  ] }\ No newline at end of file