← Commit history

Initial commit: component/mcp23s17-e

Ray ·243f8dda37 ·
2 files changed +325
README.mdadded+64
@@ -0,0 +1,64 @@+# MCP23S17-E++**Microchip Tech** · I/O Expanders · SSOP-28-208mil++MCP23S17-E from Microchip Tech, in a SSOP-28-208mil. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | GPB0 | bidirectional | Bidirectional I/O pin; can be enabled for interrupt-on-change and/or internal weak pull-up resistor. |+| 2 | GPB1 | bidirectional | Bidirectional I/O pin; can be enabled for interrupt-on-change and/or internal weak pull-up resistor. |+| 3 | GPB2 | bidirectional | Bidirectional I/O pin; can be enabled for interrupt-on-change and/or internal weak pull-up resistor. |+| 4 | GPB3 | bidirectional | Bidirectional I/O pin; can be enabled for interrupt-on-change and/or internal weak pull-up resistor. |+| 5 | GPB4 | bidirectional | Bidirectional I/O pin; can be enabled for interrupt-on-change and/or internal weak pull-up resistor. |+| 6 | GPB5 | bidirectional | Bidirectional I/O pin; can be enabled for interrupt-on-change and/or internal weak pull-up resistor. |+| 7 | GPB6 | bidirectional | Bidirectional I/O pin; can be enabled for interrupt-on-change and/or internal weak pull-up resistor. |+| 8 | GPB7 | bidirectional | Bidirectional I/O pin; can be enabled for interrupt-on-change and/or internal weak pull-up resistor. |+| 9 | VDD | power_in | Positive power supply voltage, rated 1.8 V to 5.5 V. |+| 10 | VSS | power_in | Ground reference. |+| 11 | CS | input | Chip Select input for SPI interface. |+| 12 | SCK | input | Serial clock input for SPI interface. |+| 13 | SI | input | Serial data input for SPI interface. |+| 14 | SO | output | Serial data output for SPI interface. |+| 15 | A0 | input | Hardware address pin; must be externally biased. |+| 16 | A1 | input | Hardware address pin; must be externally biased. |+| 17 | A2 | input | Hardware address pin; must be externally biased. |+| 18 | RESET | input | Hardware reset input; must be externally biased. |+| 19 | INTB | output | Interrupt output for PORTB; can be configured as active-high, active-low or open-drain. |+| 20 | INTA | output | Interrupt output for PORTA; can be configured as active-high, active-low or open-drain. |+| 21 | GPA0 | bidirectional | Bidirectional I/O pin; can be enabled for interrupt-on-change and/or internal weak pull-up resistor. |+| 22 | GPA1 | bidirectional | Bidirectional I/O pin; can be enabled for interrupt-on-change and/or internal weak pull-up resistor. |+| 23 | GPA2 | bidirectional | Bidirectional I/O pin; can be enabled for interrupt-on-change and/or internal weak pull-up resistor. |+| 24 | GPA3 | bidirectional | Bidirectional I/O pin; can be enabled for interrupt-on-change and/or internal weak pull-up resistor. |+| 25 | GPA4 | bidirectional | Bidirectional I/O pin; can be enabled for interrupt-on-change and/or internal weak pull-up resistor. |+| 26 | GPA5 | bidirectional | Bidirectional I/O pin; can be enabled for interrupt-on-change and/or internal weak pull-up resistor. |+| 27 | GPA6 | bidirectional | Bidirectional I/O pin; can be enabled for interrupt-on-change and/or internal weak pull-up resistor. |+| 28 | GPA7 | bidirectional | Bidirectional I/O pin; can be enabled for interrupt-on-change and/or internal weak pull-up resistor. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Microchip Tech |+| Package | SSOP-28-208mil |+| Category | Interface |+| Pins | 28 |++## CAD (KiCad official)++- Symbol: `MCP23S17-E`+- Footprint: `Package_SO:SSOP-28_5.3x10.2mm_P0.65mm`+- 3D model: SSOP-28-208mil (KiCad packages3D, STEP)+- 3D model files: `mcp23s17-e-etched.step` / `mcp23s17-e-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `mcp23s17-e.step` / `mcp23s17-e.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Microchip Tech datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588883443207430144) (42 pp, sha256 `14159c6f5655e943`, retrieved 2026-09-21, tier: lcsc)+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.2`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-4-6` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/mcp23s17-e-datasheet.pdf)
page.jsonadded+261
@@ -0,0 +1,261 @@+{+  "slug": "mcp23s17-e",+  "version": "0.1.0",+  "type": "component",+  "description": "Microchip Tech I/O Expanders, SSOP-28-208mil. Datasheet-verified pinout, KiCad symbol/footprint/3D.",+  "tags": [+    "component",+    "interface",+    "mcp23s17-e",+    "factory-2.0.0",+    "extractor-text"+  ],+  "dependencies": {},+  "hero": {+    "type": "image",+    "path": "docs/hero.png"+  },+  "files": [+    "page.json",+    "README.md",+    "mcp23s17-e.kicad_sym",+    "mcp23s17-e.kicad_mod",+    "mcp23s17-e.glb",+    "mcp23s17-e.step",+    "mcp23s17-e.lbr",+    "docs/hero.png",+    "docs/mcp23s17-e-datasheet.pdf",+    "viewers/symbol.html",+    "viewers/footprint.html"+  ],+  "component": {+    "mpn": "MCP23S17-E",+    "manufacturer": "Microchip Tech",+    "package": "SSOP-28-208mil",+    "pin_count": 28,+    "category": "Interface",+    "subcategory": "I/O Expanders",+    "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588883443207430144",+    "parts": {+      "symbol": "mcp23s17-e.kicad_sym",+      "footprint": "mcp23s17-e.kicad_mod",+      "model_3d": "mcp23s17-e-etched.glb",+      "model_3d_plain": "mcp23s17-e.glb",+      "model_3d_step": "mcp23s17-e-etched.step",+      "model_3d_step_plain": "mcp23s17-e.step",+      "lbr": "mcp23s17-e.lbr"+    },+    "distributor_links": {+      "lcsc": "C148009"+    },+    "pins": [+      {+        "number": "1",+        "name": "GPB0",+        "type": "bidirectional",+        "description": "Bidirectional I/O pin; can be enabled for interrupt-on-change and/or internal weak pull-up resistor."+      },+      {+        "number": "2",+        "name": "GPB1",+        "type": "bidirectional",+        "description": "Bidirectional I/O pin; can be enabled for interrupt-on-change and/or internal weak pull-up resistor."+      },+      {+        "number": "3",+        "name": "GPB2",+        "type": "bidirectional",+        "description": "Bidirectional I/O pin; can be enabled for interrupt-on-change and/or internal weak pull-up resistor."+      },+      {+        "number": "4",+        "name": "GPB3",+        "type": "bidirectional",+        "description": "Bidirectional I/O pin; can be enabled for interrupt-on-change and/or internal weak pull-up resistor."+      },+      {+        "number": "5",+        "name": "GPB4",+        "type": "bidirectional",+        "description": "Bidirectional I/O pin; can be enabled for interrupt-on-change and/or internal weak pull-up resistor."+      },+      {+        "number": "6",+        "name": "GPB5",+        "type": "bidirectional",+        "description": "Bidirectional I/O pin; can be enabled for interrupt-on-change and/or internal weak pull-up resistor."+      },+      {+        "number": "7",+        "name": "GPB6",+        "type": "bidirectional",+        "description": "Bidirectional I/O pin; can be enabled for interrupt-on-change and/or internal weak pull-up resistor."+      },+      {+        "number": "8",+        "name": "GPB7",+        "type": "bidirectional",+        "description": "Bidirectional I/O pin; can be enabled for interrupt-on-change and/or internal weak pull-up resistor."+      },+      {+        "number": "9",+        "name": "VDD",+        "type": "power_in",+        "description": "Positive power supply voltage, rated 1.8 V to 5.5 V."+      },+      {+        "number": "10",+        "name": "VSS",+        "type": "power_in",+        "description": "Ground reference."+      },+      {+        "number": "11",+        "name": "CS",+        "type": "input",+        "description": "Chip Select input for SPI interface."+      },+      {+        "number": "12",+        "name": "SCK",+        "type": "input",+        "description": "Serial clock input for SPI interface."+      },+      {+        "number": "13",+        "name": "SI",+        "type": "input",+        "description": "Serial data input for SPI interface."+      },+      {+        "number": "14",+        "name": "SO",+        "type": "output",+        "description": "Serial data output for SPI interface."+      },+      {+        "number": "15",+        "name": "A0",+        "type": "input",+        "description": "Hardware address pin; must be externally biased."+      },+      {+        "number": "16",+        "name": "A1",+        "type": "input",+        "description": "Hardware address pin; must be externally biased."+      },+      {+        "number": "17",+        "name": "A2",+        "type": "input",+        "description": "Hardware address pin; must be externally biased."+      },+      {+        "number": "18",+        "name": "RESET",+        "type": "input",+        "description": "Hardware reset input; must be externally biased."+      },+      {+        "number": "19",+        "name": "INTB",+        "type": "output",+        "description": "Interrupt output for PORTB; can be configured as active-high, active-low or open-drain."+      },+      {+        "number": "20",+        "name": "INTA",+        "type": "output",+        "description": "Interrupt output for PORTA; can be configured as active-high, active-low or open-drain."+      },+      {+        "number": "21",+        "name": "GPA0",+        "type": "bidirectional",+        "description": "Bidirectional I/O pin; can be enabled for interrupt-on-change and/or internal weak pull-up resistor."+      },+      {+        "number": "22",+        "name": "GPA1",+        "type": "bidirectional",+        "description": "Bidirectional I/O pin; can be enabled for interrupt-on-change and/or internal weak pull-up resistor."+      },+      {+        "number": "23",+        "name": "GPA2",+        "type": "bidirectional",+        "description": "Bidirectional I/O pin; can be enabled for interrupt-on-change and/or internal weak pull-up resistor."+      },+      {+        "number": "24",+        "name": "GPA3",+        "type": "bidirectional",+        "description": "Bidirectional I/O pin; can be enabled for interrupt-on-change and/or internal weak pull-up resistor."+      },+      {+        "number": "25",+        "name": "GPA4",+        "type": "bidirectional",+        "description": "Bidirectional I/O pin; can be enabled for interrupt-on-change and/or internal weak pull-up resistor."+      },+      {+        "number": "26",+        "name": "GPA5",+        "type": "bidirectional",+        "description": "Bidirectional I/O pin; can be enabled for interrupt-on-change and/or internal weak pull-up resistor."+      },+      {+        "number": "27",+        "name": "GPA6",+        "type": "bidirectional",+        "description": "Bidirectional I/O pin; can be enabled for interrupt-on-change and/or internal weak pull-up resistor."+      },+      {+        "number": "28",+        "name": "GPA7",+        "type": "bidirectional",+        "description": "Bidirectional I/O pin; can be enabled for interrupt-on-change and/or internal weak pull-up resistor."+      }+    ],+    "provenance": {+      "extractor": "extract_pins 0.2",+      "factory_chain": {+        "factory": "2.0.0",+        "extractor": "extract_pins 0.2",+        "primary_model": "claude-haiku-4-5-20251001",+        "primary_mode": "text",+        "consensus_model": "claude-sonnet-4-6",+        "consensus": "agreed",+        "guards": "pin_guards 0.1: passed",+        "guard_notes": [],+        "pages_sent": 42,+        "cost_usd": 0.4239,+        "at": "2026-09-21T22:21:03"+      },+      "datasheet": {+        "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588883443207430144",+        "pages": 42,+        "sha256": "14159c6f5655e943",+        "source_tier": "lcsc"+      },+      "cad": "KiCad official (CC-BY-SA 4.0)",+      "pins": {+        "total": 28,+        "described": 28,+        "cites_pages": true,+        "refuses_to_fabricate": true+      }+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    }+  },+  "visibility": "public",+  "org": "adom",+  "author": {+    "name": "Ray",+    "email": "[email protected]"+  }+}\ No newline at end of file